Secular trends in the prevalence of meeting 24-hour movement guidelines among U.S. adolescents: evidence from NHANES 2007-2016.

Background: The 24-Hour Movement Guidelines (24-HMG) recommend a balanced combination of physical activity (PA), sedentary behavior (SB) and sleep (SLP) for optimal health. However, there is limited understanding of how well U.S. adolescents adhere to these guidelines. This study aims to analyze the prevalence trends of meeting the 24-HMG among a nationally representative sample of U.S. general adolescents. Methods: The study included 2,273 adolescents (55.3% boys) aged 16-19 who participated in the National Health and Nutrition Examination Surveys (NHANES) from 2007 to 2016. The researchers categorized the adolescents based on whether they met various PA, SB, and SLP recommendations, as well as different combinations of these recommendations, separately for boys and girls. The prevalence rate, weighted by survey data, was calculated along with a 95% confidence interval (CI) to assess the changes in meeting the 24-HMG among U.S. adolescents across different survey years and sociodemographic subgroups. Results: In the 2015-2016 cycle, approximately 6.3% of adolescents did not meet any of the three recommendations, while only 19.2% of adolescents achieved all three guidelines. Compliance with PA and SB recommendations among adolescents has decreased over time, from 72.5% (65.9% to 79.2%) to 64.2% (57.4% to 70.9%) for PA, and from 59.0% (49.6% to 68.4%) to 46.6% (37.8% to 55.5%) for SB, respectively, from 2007-2008 cycle to 2015-2016 cycle. Boys exhibited more favorable patterns in meeting different sets of recommendations compared to girls (p-value <0.001). This includes meeting both PA and SB guidelines (15.5% for boys and 11.1% for girls) and meeting both PA and SLP guidelines (19.5% for boys and 15.7% for girls). The level of parental education was found to have effect on meeting all three guidelines (Ptrend < 0.05). Conclusion: We analyzed ten consecutive years of representative NHANES data to evaluate the prevalence meeting 24-HMG and found that the proportion of adolescents aged 16-19 in the U.S. who adhered to all three movement guidelines simultaneously has consistently remained low throughout each survey cycle. Notably, there has been a significant decline in the proportion of adolescents meeting the SB guideline.

Reconfigurable Microlens Array Enables Tunable Imaging Based on Shape Memory Polymers.

Microlens arrays (MLAs) with a tunable imaging ability are core components of advanced micro-optical systems. Nevertheless, tunable MLAs generally suffer from high power consumption, an undeformable rigid body, large and complex systems, or limited focal length tunability. The combination of reconfigurable smart materials with MLAs may lead to distinct advantages including programmable deformation, remote manipulation, and multimodal tunability. However, unlike photopolymers that permit flexible structuring, the fabrication of tunable MLAs and compound eyes (CEs) based on transparent smart materials is still rare. In this work, we report reconfigurable MLAs that enable tunable imaging based on shape memory polymers (SMPs). The smart MLAs with closely packed 200 × 200 microlenses (40.0 µm in size) are fabricated via a combined technology that involves wet etching-assisted femtosecond laser direct writing of MLA templates on quartz, soft lithography for MLA duplication using SMPs, and the mechanical heat setting for programmable reconfiguration. By stretching or squeezing the shape memory MLAs at the transition temperature (80 °C), the size, profiles, and spatial distributions of the microlenses can be programmed. When the MLA is stretched from 0 to 120% (area ratio), the focal length is increased from 116 to 283 µm. As a proof of concept, reconfigurable MLAs and a 3D CE with a tunable field of view (FOV, 160-0°) have been demonstrated in which the thermally triggered shape memory deformation has been employed for tunable imaging. The reconfigurable MLAs and CEs with a tunable focal length and adjustable FOV may hold great promise for developing smart micro-optical systems.

Arbitrary fabrication of complex lithium niobate three-dimensional microstructures for second harmonic generation enhancement.

Lithium niobate (LN) crystal plays important roles in future integrated photonics, but it is still a great challenge to efficiently fabricate three-dimensional micro-/nanostructures on it. Here, a femtosecond laser direct writing-assisted liquid back-etching technology (FsLDW-LBE) is proposed to achieve the three-dimensional (3D) microfabrication of lithium niobate (LN) with high surface quality (Ra = 0.422 nm). Various 3D structures, such as snowflakes, graphic arrays, criss-cross arrays, and helix arrays, have been successfully fabricated on the surface of LN crystals. As an example, a microcone array was fabricated on LN crystals, which showed a strong second harmonic signal enhancement with up to 12 times bigger than the flat lithium niobate. The results indicate that the method provides a new approach for the microfabrication of lithium niobate crystals for nonlinear optics.

Decreased NSD2 impairs stromal cell proliferation in human endometrium via reprogramming H3K36me2.

In brief: The proliferation of the endometrium is regulated by histone methylation. This study shows that decreased NSD2 impairs proliferative-phase endometrial stromal cell proliferation in patients with recurrent implantation failure via epigenetic reprogramming of H3K36me2 methylation on the promoter region of MCM7. Abstract: Recurrent implantation failure (RIF) is a formidable challenge in assisted reproductive technology because of its unclear molecular mechanism. Impaired human endometrial stromal cell (HESC) proliferation disrupts the rhythm of the menstrual cycle, resulting in devastating disorders between the embryo and the endometrium. The molecular function of histone methylation enzymes in modulating HESC proliferation remains largely uncharacterized. Herein, we found that the levels of histone methyltransferase nuclear receptor binding SET domain protein 2 (NSD2) and the dimethylation of lysine 36 on histone H3 are decreased significantly in the proliferative-phase endometrium of patients with RIF. Knockdown of NSD2 in an HESC cell line markedly impaired cell proliferation and globally reduced H3K36me2 binding to chromatin, leading to altered expression of many genes. Transcriptomic analyses revealed that cell cycle-related gene sets were downregulated in the endometrium of patients with RIF and in NSD2­knockdown HESCs. Furthermore, RNA-sequencing and CUT&Tag sequencing analysis suggested that NSD2 knockdown reduced the binding of H3K36me2 to the promoter region of cell cycle marker gene MCM7 (encoding minichromosome maintenance complex component 7) and downregulated its expression. The interaction of H3K36me2 with the MCM7 promoter was verified using chromatin immunoprecipitation-quantitative real-time PCR. Our results demonstrated a unifying epigenome-scale mechanism by which decreased NSD2 impairs endometrial stromal cell proliferation in the proliferative-phase endometrium of patients with RIF.

Complete composition analysis of polysaccharides based on HPAEC-PAD coupled with quantitative analysis of multi-components by single marker.

INTRODUCTION: Monosaccharide compositions analysis (MCA) is indispensable for structural characterisations and structure-activity relationships of plant polysaccharides. OBJECTIVES: To develop a concise and direct MCA method, we established a quantitative analysis of the multi-monosaccharaides by single marker (QAMS) by high-performance anion-exchange chromatography with pulsed-amperometric detection (HPAEC-PAD) method. METHODOLOGY: A stable and reproducible HPAEC-PAD method for simultaneous determination of aldoses, ketoses and uronic acids (i.e., l-arabinose, d-xylose, d-ribose, l-rhamnose, d-fucose, d-mannose, d-glucose, d-galactose, d-fructose, d-glucuronic acid and d-galacturonic acid) was established by systematic optimisation of stationary phases, column temperatures and elution programmes. On this basis, the QAMS method was proposed through comprehensive investigations of relative correction factor (RCF) variations under different influencing factors, for example, sample concentrations, flow rates, and column temperatures. RESULTS: Using rhamnose as an internal reference standard, the contents of the other monosaccharide components in polysaccharides from Panax quinquefolium L. and Achyranthes bidentata Bl. samples were simultaneously determined by QAMS, and there was no significant difference between the results from the QAMS and external standard method (t test, P > 0.520). In addition, a MCA fingerprinting of 30 batches of P. quinquefolium polysaccharide was established by HPAEC-PAD, and six common peaks were assigned and determined. CONCLUSIONS: The established HPAEC-PAD-QAMS method was successfully applied to the MCA of polysaccharides from P. quinquefolium and A. bidentata after optimisation of hydrolysis conditions. HPAEC-PAD-QAMS was proposed and established for MCA of plant polysaccharides for the first time.

Construction of Ag-TiO2 Hierarchical Micro-/Nanostructures on a Ti Plate for Photocatalysts via Femtosecond Laser Hybrid Technology.

Titanium dioxide photocatalysts can break down pollutants using natural light. They possess notable light stability, chemical stability, and catalytic effects, thus leading to extensive research worldwide. However, the limited light absorption range of titanium dioxide and their inefficiencies in generating and transporting photogenerated carriers hinder the enhancement of their photocatalytic performance. In this study, we employ a femtosecond laser composite processing method to create an Ag-TiO2 nanoplate composite catalyst. This method doubles the catalytic efficiency compared with the structure processed solely with the femtosecond laser. The resulting Ag-TiO2 nanoplate composite catalysts show significant promise for addressing environmental and energy challenges, including the photodegradation of organic pollutants.

Integration of cross-scale milli/microlenses by ion beam etching and femtosecond laser modification.

Integrated cross-scale milli/microlenses offer irreplaceable functions in modern integrated optics with the advantage of reducing the size of the optical system to millimeters or microns. However, the technologies for fabricating millimeter-scale lenses and microlenses are always incompatible, which makes the successful fabrication of cross-scale milli/microlenses with a controlled morphology challenging. Here, ion beam etching is proposed as a means to fabricate smooth millimeter-scale lenses on various hard materials. In addition, by combining femtosecond laser modification and ion beam etching, an integrated cross-scale concave milli/microlens (27,000 microlenses on a lens with a diameter of 2.5 mm) is demonstrated on fused silica, and can be used as the template for a compound eye. The results provide a new, to the best of our knowledge, route for the flexible fabrication of cross-scale optical components for modern integrated optical systems.

Microwave assisted free radical degradation of Schisandra polysaccharides: Optimization, identification and application.

In order to establish structural-fingerprinting of polysaccharides for improvement of quality assessment, a sample preparation method based on microwave assisted free radical degradation (MFRD) of plant polysaccharides was proposed to produce oligosaccharides and small Mw polysaccharides. As a case study of Schisandra chinensis and S. sphenanthera fruit polysaccharides (SCP and SSP), the MFRD condition (i.e., 100 °C, 30 s and 80 W) was confirmed to be optimal. The potential structures of the MFRD products of SCP and SSP were further discussed by combinations of HILIC-ESI--QTOF-MSE and HILIC-ESI--Q-OT-IT-MS/MS. As followed, multivariable statistical analysis shows a clear separation of SCP and the SSP in PCA and OPLS-DA plots based HILIC-ESI--QTOF-MSE data. The VIP plot unveils several key Q-markers (e.g., peaks 3, 8, 9, 10, 15, 25, 26, 28, 29 and 30) with significant differences and stable emergences. Furthermore, a low-polymerization compositional fingerprinting was successfully constructed for SCP and SSP using a high-performance anion-exchange chromatography with pulsed amperometric detection. Compared to the conventional sample preparation methods, the MFRD took only a few thousandth of the time to accomplish degradations of plant polysaccharides. It significantly improves sample preparations and is generally applicable to various polysaccharide samples.

Wafer-scale high aspect-ratio sapphire periodic nanostructures fabricated by self-modulated femtosecond laser hybrid technology.

Sapphire nanostructures with a high aspect-ratio have broad applications in photoelectronic devices, which are difficult to be fabricated due to the properties of high transparency and hardness, remarkable thermal and chemical stability. Although the phenomenon of laser-induced periodic surface structures (LIPSS) provides an extraordinary idea for surface nanotexturing, it suffers from the limitation of the small depth of the nanostructures. Here, a high-efficiency self-modulated femtosecond laser hybrid technology was proposed to fabricate nanostructures with high aspect-ratios on the sapphire surface, which was combined backside laser modification and subsequent wet etching. Due to the refractive index mismatch, the focal length of the laser could be elongated when focused inside sapphire. Thus, periodic nanostructures with high-quality aspect ratios of more than 55 were prepared on the sapphire surface by using this hybrid fabrication method. As a proof-of-concept, wafer-scale (∼2 inches) periodic nanostripes with a high aspect-ratio were realized on a sapphire surface, which possesses unique diffractive properties compared to typical shallow gratings. The results indicate that the self-modulated femtosecond laser hybrid technology is an efficient and versatile technique for producing high aspect-ratio nanostructures on hard and transparent materials, which would propel the potential applications in optics and surface engineering, sensing, etc.

Early pregnancy exposure to beta-cypermethrin compromises endometrial decidualisation in mice via downregulation of cyclin D3, CDK4/6, and p21.

Beta-cypermethrin (ß-CYP) is a highly effective broad-spectrum insecticide that can potentially affect female reproduction. However, little is known about the effect of ß-CYP on uterine decidualisation, which is a vital process by which the uterus provides a suitable microenvironment for pregnancy maintenance. Therefore, we focused on the effect and mechanism of ß-CYP on endometrial decidualisation during early pregnancy in mice. The results indicated that the expression levels of HOXA10, BMP2, and IGFBP1 was significantly downregulated in the decidual tissue and primary endometrial stromal cells of pregnant and pseudopregnant mice following ß-CYP treatment. Serum E2 concentration was significantly increased, whereas P4 concentration and oestrogen receptor (ERα) and progesterone receptor (PRA) expression were significantly downregulated following ß-CYP exposure. The number of polyploid decidual cells was lower in the ß-CYP-treated group. Furthermore, ß-CYP significantly downregulated the protein expression levels of CDK4 and CDK6, and the mRNA expression levels of cyclin D3 and p21. The number of foetuses per female in the first litter was markedly reduced following exposure to ß-CYP. In summary, early pregnancy exposure to ß-CYP may result in defective endometrial decidualisation via compromised proliferation of uterine stromal cells and reduced expressions of cyclin D3, CDK4/6, and p21 in mice.

TCF3 regulates human endometrial stromal cell proliferation and migration in RPL.

Recurrent pregnancy loss (RPL) is a multifactorial condition with no explanation of miscarriage in approximately half of the RPL patients, consequently leaving deep physical and emotional sequels. Transcription factor 3 (TCF3 or E2A), is a unique member of the LEF/TCF family and plays an important role in embryogenesis. However, its function in RPL is poorly understood. Using real-time polymerase chain reaction (qRT-PCR), western blotting, and immunohistochemistry, we demonstrated that TCF3 was downregulated in decidual tissues from RPL patients compared with healthy control (HC). Further, TCF3 knockdown inhibited proliferation, induced G0/G1 phase arrest, and promoted migration in human endometrial stromal cells (HESCs), while overexpression of TCF3 exhibited the opposite effects. RNA-sequencing analysis combined with gene-set enrichment analysis results showed that the mitogen-activated protein kinase pathway is potentially downstream of TCF3. Knockdown of TCF3 confirmed increased p38 phosphorylation, while overexpression of TCF3 inhibited p38 phosphorylation. Furthermore, we found that TCF3 protein level was decreased in HESCs under hypoxic incubation, while hypoxia-inducible factor-1α (HIF1A) knockdown increased the expression of TCF3. TCF3 overexpression recovered the proliferation ability of HESCs inhibited by hypoxia and reversed hypoxia-induced migration. Consistently, we found that RPL patients had a significantly higher level of HIF1A in the decidual tissue than HC. Overall, this study clarifies that increased HIF1A in the decidua contributes to the occurrence of RPL through the TCF3/p38 signaling pathway.

Acbp is essential for decidualization during early pregnancy in mice.

Decidualization of uterine stromal cells plays an important role in the establishment of normal pregnancy. Previous studies have demonstrated that Acyl-CoA binding protein (Acbp) is critical to cellular proliferation, differentiation, mitochondrial functions, and autophagy. The characterization and physiological function of Acbp during decidualization remain largely unknown. In the present study, we conducted the expression profile of Acbp in the endometrium of early pregnant mice. With the occurrence of decidualization, the expression of Acbp gradually increased. Similarly, Acbp expression was also strongly expressed in decidualized cells following artificial decidualization, both in vivo and in vitro. We applied the mice pseudopregnancy model to reveal that the expression of Acbp in the endometrium of early pregnant mice was not induced by embryonic signaling. Moreover, P4 significantly upregulated the expression of Acbp, whereas E2 appeared to have no regulating effect on Acbp expression in uterine stromal cells. Concurrently, we found that interfering with Acbp attenuated decidualization, and that might due to mitochondrial dysfunctions and the inhibition of fatty acid oxidation. The level of autophagy was increased after knocking down Acbp. During induced decidualization, the expression of ACBP was decreased with the treatment of rapamycin (an autophagy inducer), while increased with the addition of Chloroquine (an autophagy inhibitor). Our work suggests that Acbp plays an essential role in the proliferation and differentiation of stromal cells during decidualization through regulating mitochondrial functions, fatty acid oxidation, and autophagy.

Integration of Multifocal Microlens Array on Silicon Microcantilever via Femtosecond-Laser-Assisted Etching Technology.

Micro-opto-electromechanical systems (MOEMSs) are a new class of integrated and miniaturized optical systems that have significant applications in modern optics. However, the integration of micro-optical elements with complex morphologies on existing micro-electromechanical systems is difficult. Herein, we propose a femtosecond-laser-assisted dry etching technology to realize the fabrication of silicon microlenses. The size of the microlens can be controlled by the femtosecond laser pulse energy and the number of pulses. To verify the applicability of this method, multifocal microlens arrays (focal lengths of 7-9 µm) were integrated into a silicon microcantilever using this method. The proposed technology would broaden the application scope of MOEMSs in three-dimensional imaging systems.

Smart Diffraction Gratings Based on the Shape Memory Effect.

The shape memory effect is the capability of a structure or a material that can be deformed into a certain temporary shape under external stimulus, and the shape will be fixed without the stimulus. The recovery process can be triggered by the same stimulus. The intelligent tunable device based on the shape memory effect has a wide range of applications in many fields. In the optical field, smart diffraction gratings can accomplish in situ optical diffractions according to requirements, meeting the high demand in the next generation of smart optical systems. However, it is essential to construct high-precision grating structures based on shape memory materials. Here, a smart diffraction grating based on UV-curable shape memory polymers (SMPs) via two-beam interference is reported, with nano-scale precision, excellent deformability and recovery ability, and adjustable spectroscopic performance. More importantly, based on the shape memory effect, grating structures that surpass the precision of the fabrication system can be obtained. The smart grating exhibits rapid deformation and recovery upon heating and long-term storage capability, which facilitates them to be applied in optics, electronics, and integrated sensing.

High-quality rapid laser drilling of transparent hard materials.

In this study, a hybrid method for high-quality rapid drilling of transparent hard materials which combines femtosecond laser (fs-laser) Bessel beam modifying materials and selective wet etching is presented. Using this method, micro-holes with no taper of different sizes (from 10 to 35 µm) and shapes (square, triangle, circular, and pentagram) are fabricated. Bessel beams of different lengths can be generated flexibly by loading different computer-generated holograms (CGHs) into the spatial light modulator (SLM) and the maximum length of light interacting with materials can reach 320 µm, leading to a reduction of the laser scanning time by two orders of magnitude. Moreover, a set of three-dimensional multi-layer submicron through-holes in crystal materials is also realized, with an aspect ratio of more than 1000 for each hole. These results indicate that this method has broad application potential in chip packaging, aviation manufacturing, single particle catalysis, and other fields.

Rapid Fabrication of Smooth Micro-Optical Components on Glass by Etching-Assisted Femtosecond Laser Modification.

Femtosecond laser (fs-laser) is unfavorable in applications for the fabrication of micro-optical devices on hard materials owing to the problems of low fabrication efficiency and high surface roughness. Herein, a hybrid method combining fs-laser scanning, subsequent etching, and annealing was proposed to realize micro-optical devices with low roughness on glass. Compared to traditional laser ablation, the fabrication efficiency in this work was improved by one order of magnitude, and the surface roughness was decreased to 15 nm. Using this method, aspherical convex microlenses and spherical concave microlenses that possess excellent focusing and imaging properties are realized on photosensitive glass. The diameter and height of the microlenses were controlled by adjusting the fabrication parameters. These results indicate that the fs-laser-based hybrid method will open new opportunities for fabricating micro-optical components on hard materials.

Clinical characteristics and related risk factors of disease severity in 101 COVID-19 patients hospitalized in Wuhan, China.

Coronavirus disease 2019 (COVID-19) broke out in December 2019. Due its high morbility and mortality, it is necessary to summarize the clinical characteristics of COVID-19 patients to provide more theoretical basis for future treatment. In the current study, we conducted a retrospective analysis of the clinical characteristics of COVID-19 patients and explored the risk factors for the severity of illness. A total of 101 COVID-19 patients hospitalized in Leishenshan Hospital (Wuhan, China) was classified into three sub-types: moderate (n = 47), severe (n = 36), and critical (n = 18); their clinical data were collected from the Electronic Medical Record. We showed that among the 101 COVID-19 patients, the median age was 62 years (IQR 51-74); 50 (49.5%) patients were accompanied by hypertension, while 25 (24.8%) and 22 (21.8%) patients suffered from diabetes and heart diseases, respectively, with complications. All patients were from Wuhan who had a definite history of exposure to the epidemic area. Multivariate logistic regression analysis revealed that older age, diabetes, chronic liver disease, percentage of neutrophils (N%) > 75%, CRP > 4 mg/L, D-dimer > 0.55 mg/L, IL-2R > 710 U/mL, IL-8 > 62 pg/mL, and IL-10 > 9.1 pg/mL were independent variables associated with severe COVID-19. In conclusion, we have identified the independent risk factors for the severity of COVID-19 pneumonia, including older age, diabetes, chronic liver disease, higher levels of N%, CRP, D-dimer, IL-2R, IL-8, and IL-10, providing evidence for more accurate risk prediction.

[Application of environmental DNA technology in natural reproduction of the four major Chinese carps in Yichang section of Yangtzi River, China]. / 环境DNA技术在宜昌江段四大家鱼自然繁殖中的应用.

We explored the sample collection and DNA extraction method of environmental DNA (eDNA) technique. Droplet digital PCR (ddPCR) was used to detect the eDNA concentration of the four major Chinese carps in different water layers and different cross-sections of Yichang section of Yangtze River trunk stream. We analyzed the relationship between eDNA concentration and density of egg and fry, and explored the feasibility of using eDNA technique to monitor the natural reproduction of the four major Chinese carps. Compared with the results from traditional survey methods, the eDNA concentration of the four major Chinese carps was extremely significantly correlated with egg and fry density. The maximum concentration was consistent with the peak occurrence time of egg and fry, suggesting that eDNA technique could predict the fishcrowd behavior for spawning. The investigation of cross-section eDNA concentration during two consecutive years suggested that the range of fish spawning ground was 4.5 km upstream to 1 km downstream of Yuyangxi. The predicted spawning ground was located within the range estimated by traditional methods from the lower part of Carmine Dam to Honghua Tuo. Our results indicate that eDNA technique, as a new ecological investigation method, could more accurately determine the distribution of fish with a certain population size, and thus with a good application prospect.

miR-21a inhibits decidual cell apoptosis by targeting Pdcd4.

Decidualization of endometrial stromal cells (ESCs) accompanied with embryo implantation is a key process in mammalian reproduction. Evidence suggests that maintenance of decidual cells function is essential. As a critical part in post-transcriptional gene regulation, microRNAs (miRNAs/miR) have been confirmed to be involved in decidualization. However, whether microRNAs regulate decidual cells function has not been reported. Aiming to clarify the role and potential mechanism of miRNAs in decidual cells, artificial induced decidualization model in mice was established. There are 94 differentially expressed miRNAs (≥two-fold change) between decidualized and non-decidualized tissues, including 60 upregulated and 34 downregulated miRNAs. Of the differentially expressed miRNAs, mmu-miR-21a is up-regulated. RT-qPCR also confirmed the up-regulation of mmu-miR-21a following decidualization in vivo and in vitro, and bioinformatic analysis and luciferase activity assay revealed Pdcd4 to be the target gene of mmu-miR-21a. Inhibition of mmu-miR-21a restrained secretory function of decidual cells induced by mESCs, accompanied with increase of Pdcd4 expression and resulted in the increase of cell apoptosis. In addition, we also determined the expression of hsa-miR-21 and Pdcd4 in human proliferative endometrial tissues and decidua tissues. hsa-miR-21 showed higher expression in human decidua tissues compared with proliferative endometrial tissues, while expression of Pdcd4 was contrary to that of hsa-miR-21. Similarly, cell apoptosis increased significantly in human endometrial stromal cell line in response to inhibition of hsa-miR-21. Collectively, we conclude that mmu-miR-21a/hsa-miR-21 may play a key role in regulating the function of decidual cells by inhibiting cell apoptosis through targeting Pdcd4.

Tailoring CO2-Activated Ion Nanochannels Using Macrocyclic Pillararenes.

Gas-responsive nanochannels have great relevance for applications in many fields. Inspired by CO2-sensitive ion channels, herein we present an approach for designing solid-state nanochannels that allow controlled regulation of ion transport in response to alternate CO2/N2 stimuli. The pillar[5]arene (P5N) bearing diethylamine groups can convert into the water-soluble host P5C, containing cationic tertiary ammonium salt groups after absorbing CO2. Subsequently, the nanochannel walls are tailored using P5N-based host-guest chemistry. The ion transport rate of K+ in the P5N nanochannels under CO2 was 1.66 × 10-4 mol h-1 m-2, whereas that under N2 was 7.98 × 10-4 mol h-1 m-2. Notably, there was no significant change to the ion current after eight cycles, which may indicate the stability and repeatability of CO2-activated ion nanochannels. It is speculated that the difference in ion conductance resulted from the change in wettability and surface charge within the nanochannels in response to the gas stimuli. Achieving CO2-activated ion transport in solid-state nanochannels opens new avenues for biomimetic nanopore systems and advanced separation processes.