Molecular "backbone surgery" of electron-deficient heteroarenes based on dithienopyrrolobenzothiadiazole: conformation-dependent crystal structures and charge transport properties.

Electron-deficient heteroarenes based on dithienopyrrolobenzothiadiazole (BTP) have been highly attractive due to their fascinating packing structures, broad absorption profiles, and promising applications in non-fullerene organic solar cells. However, the control of their crystal structures for superior charge transport still faces big challenges. Herein, a conformation engineering strategy is proposed to rationally manipulate the single crystal structure of BTP-series heteroarenes. The parent molecule BTPO-c has a 3D network crystal structure, which originates from its banana-shaped conformation. Subtracting one thiophene moiety from the central backbone leads to a looser brickwork crystal structure of the derivative BTPO-z because of its interrupted angular-shaped conformation. Further subtracting two thiophene moieties results in the derivative BTPO-l with a compact 2D-brickwork crystal structure due to its quasi-linear conformation with a unique dimer packing structure and short π-π stacking distance (3.30 Å). Further investigation of charge-transport properties via single-crystal organic transistors demonstrates that the compact 2D-brickwork crystal structure of BTPO-l leads to an excellent electron mobility of 3.5 cm2 V-1 s-1, much higher than that of BTPO-c with a 3D network (1.9 cm2 V-1 s-1) and BTPO-z with a looser brickwork structure (0.6 cm2 V-1 s-1). Notably, this study presents, for the first time, an elegant demonstration of the tunable single crystal structures of electron-deficient heteroarenes for efficient organic electronics.

Self-Anchored Van-Der-Waals Stacking Growth of Transition-Metal Dichalcogenide Nanoplates.

Transition-metal dichalcogenide (TMDs) nanoplates exhibit unique properties different from their monolayer counterparts. Controllable nucleation and growth are prerequisite and highly desirable for their practical applications. Here, a self-anchored van-der-Waals stacking growth method is developed, by which the substrate pit induced by precursor etching anchors the source material, impedes the lateral spreading of source droplets and facilitates the in situ stacking growth of high-quality TMD nanoplates with a thickness of tens to hundreds of nanometers at well-defined locations. As such, an array of TMD nanoplates with controlled lateral dimensions are produced and applied in arrayed photodetectors. This study solves the problem of controllable preparation of TMD nanoplates, holding promise for applications in electronics and optoelectronics.

Vertical Conductive Metal-Organic Framework Single-Crystalline Nanowire Arrays for Efficient Electrocatalytic Hydrogen Evolution.

The construction of crystalline metal-organic frameworks with regular architectures supportive of enhanced mass transport and bubble diffusion is imperative for electrocatalytic applications; however, this poses a formidable challenge. Here, a method is presented that confines the growth of nano-architectures to the liquid-liquid interface. Using this method, vertically oriented single crystalline nanowire arrays of an Ag-benzenehexathiol (BHT) conductive metal-organic framework (MOF) are fabricated via an "in-plane self-limiting and out-of-plane epitaxial growth" mechanism. This material has excellent electrocatalytic features, including highly exposed active sites, intrinsically high electrical conductivity, and superhydrophilic and superaerophobic properties. Leveraging these advantages, the carefully designed material demonstrates superior electrocatalytic hydrogen evolution activity, resulting in a low Tafel slope of 66 mV dec-1 and a low overpotential of 275 mV at a high current density of 1 A cm-2. Finite element analysis (FEA) and in situ microscopic verification indicates that the nanowire array structure significantly enhances the electrolyte transport kinetics and promotes the rapid release of gas bubbles. The findings highlight the potential of using MOF-based ordered nanoarray structures for advanced electrocatalytic applications.

Photovoltaic nanocells for high-performance large-scale-integrated organic phototransistors.

A high-performance large-scale-integrated organic phototransistor needs a semiconductor layer that maintains its photoelectric conversion ability well during high-resolution pixelization. However, lacking a precise design for the nanoscale structure, a trade-off between photoelectric performance and device miniaturization greatly limits the success in commercial application. Here we demonstrate a photovoltaic-nanocell enhancement strategy, which overcomes the trade-off and enables high-performance organic phototransistors at a level beyond large-scale integration. Embedding a core-shell photovoltaic nanocell based on perovskite quantum dots in a photocrosslinkable organic semiconductor, ultralarge-scale-integrated (>221 units) imaging chips are manufactured using photolithography. 27 million pixels are interconnected and the pixel density is 3.1 × 106 units cm-2, at least two orders of magnitude higher than in existing organic imaging chips and equivalent to the latest commercial full-frame complementary metal-oxide-semiconductor camera chips. The embedded photovoltaic nanocells induce an in situ photogating modulation and enable photoresponsivity and detectivity of 6.8 × 106 A W-1 and 1.1 × 1013 Jones (at 1 Hz), respectively, achieving the highest values of organic imaging chips at large-scale or higher integration. In addition, a very-large-scale-integrated (>216 units) stretchable biomimetic retina based on photovoltaic nanocells is manufactured for neuromorphic imaging recognition with not only resolution but also photoresponsivity and power consumption approaching those of the biological counterpart.

One-base-mismatch CRISPR-based transistors for single nucleotide resolution assay.

An effective strategy for accurately detecting single nucleotide variants (SNVs) is of great significance for genetic research and diagnostics. However, strict amplification conditions, complex experimental instruments, and specialized personnel are required to obtain a satisfactory tradeoff between sensitivity and selectivity for SNV discrimination. In this study, we present a CRISPR-based transistor biosensor for the rapid and highly selective detection of SNVs in viral RNA. By introducing a synthetic mismatch in the crRNA, the CRISPR-Cas13a protein can be engineered to capture the target SNV RNA directly on the surface of the graphene channel. This process induces a fast electrical signal response in the transistor, obviating the need for amplification or reporter molecules. The biosensor exhibits a detection limit for target RNA as low as 5 copies in 100 µL, which is comparable to that of real-time quantitative polymerase chain reaction (PCR). Its operational range spans from 10 to 5 × 105 copy mL-1 in artificial saliva solution. This capability enables the biosensor to discriminate between wild-type and SNV RNA within 15 min. By introducing 10 µL of swab samples during clinical testing, the biosensor provides specific detection of respiratory viruses in 19 oropharyngeal specimens, including influenza A, influenza B, and variants of SARS-CoV-2. This study emphasizes the CRISPR-transistor technique as a highly accurate and sensitive approach for field-deployable nucleic acid screening or diagnostics.

DNA Logical Computing on a Transistor for Cancer Molecular Diagnosis.

Given the high degree of variability and complexity of cancer, precise monitoring and logical analysis of different nucleic acid markers are crucial for improving diagnostic precision and patient survival rates. However, existing molecular diagnostic methods normally suffer from high cost, cumbersome procedures, dependence on specialized equipment and the requirement of in-depth expertise in data analysis, failing to analyze multiple cancer-associated nucleic acid markers and provide immediate results in a point-of-care manner. Herein, we demonstrate a transistor-based DNA molecular computing (TDMC) platform that enables simultaneous detection and logical analysis of multiple microRNA (miRNA) markers on a single transistor. TDMC can perform not only basic logical operations such as "AND" and "OR", but also complex cascading computing, opening up new dimensions for multi-index logical analysis. Owing to the high efficiency, sensing and computations of multi-analytes can be operated on a transistor at a concentration as low as 2×10-16 M, reaching the lowest concentration for DNA molecular computing. Thus, TDMC achieves an accuracy of 98.4% in the diagnosis of hepatocellular carcinoma from 62 serum samples. As a convenient and accurate platform, TDMC holds promise for applications in "one-stop" personalized medicine.

Photocatalytic Synthesis of γ,γ-Difluoroallylic Ketones and δ,δ-Difluoroallylic Ketones via a Desulfurative/Defluorinative Alkylation Process.

The gem-difluoroalkene moiety is frequently found in medicinal chemistry. From α-keton sulfides and thioic acids, we were able to develop a universal approach for the synthesis of γ,γ-difluoroallylic ketones and δ,δ-difluoroallylic ketones via a desulfurative/defluorinative alkylation process. We expect that this mild and efficient method will be complementary to other known strategies.

Facile Synthesis of Donor-Acceptor Heterocycloarenes Based on Pyrazine Derivatives Possessing Intriguing Iodide Ion Capture Properties.

Donor-acceptor (D-A) conjugated systems have been extensively investigated and play important roles in organic electronics. Incorporating D-A structures into (hetero)cycloarenes endows them tunable electronic properties, while the well-defined cavity remains. However, the synthetic complexity of introducing electron-acceptor moieties into (hetero)cycloarenes limits their development and applications. In this paper, the first family of electronically tunable D-A heterocycloarenes (DAHCn, n = 1-5) based on pyrazine derivatives was facilely synthesized through cyclocondensation reaction from a tetraketone-functionalized heterocycloarene precursor prepared using the ketal-protection strategy. The effect of expanded conjugation and the inserted electron-withdrawing group on the electronic structures of the D-A heterocycloarenes was studied systematically by X-ray crystallographic analysis, various spectroscopic measurements, and theoretical calculations. Interestingly, the presence of an electron-withdrawing group polarizes the inner C(sp2)-H and significantly increases the binding affinities of D-A heterocycloarenes to the iodide anion. Meanwhile, the anion affinity can be further modulated by the type of attached substituents and the distance of polarization. More importantly, the dicyanopyrazine derivative DAHC3 shows the highest binding strength to the iodide ion as a 2:1 sandwich complex (log ß2 = 12.3 and ΔG = -69.1 kJ mol-1), which is the strongest iodide receptor using C(sp2)-H hydrogen bonding interactions reported to date. Our finding provides a new strategy to design and synthesize D-A heterocycloarenes and strong anion receptors.

The Potential of a New Natural Vessel Source: Decellularized Intercostal Arteries as Sufficiently Long Small-Diameter Vascular Grafts.

Small-diameter vascular grafts (SDVGs) are severely lacking in clinical settings. Therefore, our study investigates a new source of biological vessels-bovine and porcine decellularized intercostal arteries (DIAs)-as potential SDVGs. We utilized a combination of SDS and Triton X-100 to perfuse the DIAs, establishing two different time protocols. The results show that perfusing with 1% concentrations of each decellularizing agent for 48 h yields DIAs with excellent biocompatibility and mechanical properties. The porcine decellularized intercostal arteries (PDIAs) we obtained had a length of approximately 14 cm and a diameter of about 1.5 mm, while the bovine decellularized intercostal arteries (BDIAs) were about 29 cm long with a diameter of approximately 2.2 mm. Although the lengths and diameters of both the PDIAs and BDIAs are suited for coronary artery bypass grafting (CABG), as the typical diameter of autologous arteries used in CABG is about 2 mm and the grafts required are at least 10 cm long, our research indicates that BDIAs possess more ideal mechanical characteristics for CABG than PDIAs, showing significant potential. Further enhancements may be necessary to address their limited hemocompatibility.

Four-Membered Ring-Embedded Cycloarene Enabling Anti-Aromaticity and Ultra-Narrowband Emission.

Synthesis of fully fused π-conjugated cycloarenes embedded nonbenzenoid aromatics is challenging. In this work, the first example of four-membered ring-embedded cycloarene (MF2) was designed and synthesized in single-crystal form by macrocyclization and ring fusion strategies. For comparison, single bond-linked chiral macrocycle MS2 without two fused four-membered rings and its linear-shaped polycyclic benzenoid monomer L1 were also synthesized. The pronounced anti-aromaticity of four-membered rings significantly adjusts the electronic structures and photophysical properties of cycloarene, resulting in an enhancement of the photoluminescence quantum yield (PLQY) from 10.66% and 10.74% for L1 and MS2, respectively, to 54.05% for MF2, which is the highest PLQY among the reported cycloarenes. Notably, owing to the embedded four-membered rings that reduce structural displacements, MF2 exhibits an ultra-narrowband emission with a single-digit full-width at half-maximum (FWHM) of only 7 nm (0.038 eV), which sets a new record among all reported organic narrowband luminescent molecules, and represents the first example of ultra-narrowband emission in conventional polycyclic aromatic hydrocarbons (PAHs) devoid of heteroatoms.

Homo-Site Nucleation Growth of Twisted Bilayer MoS2 with Commensurate Angles.

Moiré superlattices, composed of two layers of transition metal dichalcogenides with a relative twist angle, provide a novel platform for exploring the correlated electronic phases and excitonic physics. Here, a gas-flow perturbation chemical vapor deposition (CVD) approach is demonstrated to directly grow MoS2 bilayer with versatile twist angles. It is found that the formation of twisted bilayer MoS2 homostructures sensitively depends on the gas-flow perturbation modes, correspondingly featuring the nucleation sites of the second layer at the same (homo-site) as or at the different (hetero-site) from that of the first layer. The commensurate twist angle of ≈22° in homo-site nucleation strategy accounts for ≈16% among the broad range of twist angles due to its low formation energy, which is in consistence with the theoretical calculation. More importantly, moiré interlayer excitons with the enhanced photoluminescence (PL) intensity and the prolonged lifetime are evidenced in the twisted bilayer MoS2 with a commensurate angle of 22°, which is owing to the reason that the strong moiré potential facilitates the interlayer excitons to be trapped in the moiré superlattices. The work provides a feasible route to controllably built twisted MoS2 homostructures with strong moiré potential to investigate the correlated physics in twistronics systems.

Enzymatic cascade reactors on carbon nanotube transistor detecting trace prostate cancer biomarker.

Biosensors based on carbon nanotube field-effect transistors (CNT-FETs) have shown great potential in biomarker detection due to their high sensitivity because of appreciable semiconducting electrical properties. However, background signal interferences in complex mediums may results in low signal-to-noise ratio, which may impose challenges for precise biomarker detection in physiological fluids. In this work, we develop an enzymatic CNT-FET, with scalable production at wafer scale, for detection of trace sarcosine that is a biopsy-correlated biomarker of prostate cancer. Enzymatic cascade rectors are constructed on the CNT to improve the reaction efficiency, thereby, enhancing the signal transduction. As such, a limit of detection as low as 105 zM is achieved in buffer solution. Owing to the enhanced reaction efficiency, the testing of clinical serum samples yields significant signal difference to discriminate the prostate cancer (PCa) samples from the benign prostatic hyperplasia (BPH) samples (P = 1.07 × 10-5), demonstrating immense potential in practical applications.

Design and synthesis of broadband absorption covalent organic framework for efficient artificial photocatalytic amine coupling.

Developing highly active materials that efficiently utilize solar spectra is crucial for photocatalysis, but still remains a challenge. Here, we report a new donor-acceptor (D-A) covalent organic framework (COF) with a wide absorption range from 200 nm to 900 nm (ultraviolet-visible-near infrared light). We find that the thiophene functional group is accurately introduced into the electron acceptor units of TpDPP-Py (TpDPP: 5,5'-(2,5-bis(2-ethylhexyl)-3,6-dioxo-2,3,5,6-tetrahydropyrrolo [3,4-c]pyrrole-1,4-diyl)bis(thiophene-2-carbaldehyde), Py: 1,3,6,8-tetrakis(4-aminophenyl)pyrene) COFs not only significantly extends its spectral absorption capacity but also endows them with two-photon and three-photon absorption effects, greatly enhancing the utilization rate of sunlight. The selective coupling of benzylamine as the target reactant is used to assess the photocatalytic activity of TpDPP-Py COFs, showing high photocatalytic conversion of 99% and selectivity of 98% in 20 min. Additionally, the TpDPP-Py COFs also exhibit the universality of photocatalytic selective coupling of other imine derivatives with ~100% conversion efficiency. Overall, this work brings a significant strategy for developing COFs with a wide absorption range to enhance photocatalytic activity.

Rational Molecular Design of Diketopyrrolopyrrole-Based n-Type and Ambipolar Polymer Semiconductors.

Diketopyrrolopyrrole (DPP)-based polymer semiconductors have drawn great attention in the field of organic electronics due to the planar structure, decent solubilizing capability, and high crystallinity. However, the electron-deficient capacity of DPP derivatives are not strong enough, leading to relatively high-lying lowest unoccupied molecular orbital (LUMO) energy levels of the corresponding polymers. As a result, n-type and ambipolar DPP-based polymers are rare and their electron mobilities also lag far behind the p-type counterparts, which limits the development of important p-n-junction-based electronic devices. Therefore, new design strategies have been proposed recent years to develop n-type/ambipolar DPP-based polymers with improved performances. In this view, these molecular design strategies are summarized, including copolymerization of DPP with different acceptors and weak donors, DPP flanked aromatic ring modification, DPP-core ring expansion and DPP dimerization. The relationship between the chemical structures and organic thin-film transistor performances is intensively discussed. Finally, a perspective on future trends in the molecular design of DPP-based n-type/ambipolar polymers is also proposed.

Multi-order orbital angular momentum mode generators based on integrated long-period fiber gratings.

We propose integrated long-period fiber gratings (LPFGs) fabricated by a CO2 laser to realize a multi-channel and multi-order orbital angular momentum (OAM) mode generator. The integrated LPFG is inscribed on multiple surfaces of the few-mode fiber (FMF) by rotating the fiber in the opposite direction at an angle θ. By controlling the rotation angle, the number of integrated LPFGs can be set. The selected rotation angle is 43 ∘, which can integrate up to nine LPFGs, i.e., realizing that the number of channels for first-order orbital angular momentum (OAM) mode conversion is nine. The integrated LPFGs fabricated in this method allow a flexible design of channel spacing. In addition, the flexible selection of the integrated grating period achieves the simultaneous generation of multi-channel second-order and third-order OAM mode conversion. The multi-channel and multi-order OAM mode generators have important application in optical communication multiplexing systems and OAM sensing.

Electrically Oriented Antibodies on Transistor for Monitoring Several Copies of Methylated DNA.

An antibody transistor is a promising biosensing platform for the diagnosis and monitoring of various diseases. Nevertheless, the low concentration and short half-life of biomarkers require biodetection at the trace-molecule level, which remains a challenge for existing antibody transistors. Herein, we demonstrate a graphene field-effect transistor (gFET) with electrically oriented antibody probes (EOA-gFET) for monitoring several copies of methylated DNA. The electric field confines the orientation of antibody probes on graphene and diminishes the distance between graphene and methylated DNAs captured by antibodies, generating more induced charges on graphene and amplifying the electric signal. EOA-gFET realizes a limit of detection (LoD) of ∼0.12 copy µL-1, reaching the lowest LoD reported before. EOA-gFET shows a distinguishable signal for liver cancer clinical serum samples within ∼6 min, which proves its potential as a powerful tool for disease screening and diagnosis.

The complete chloroplast genome of Illicium simonsii Maxim. (Illiciaceae), a species with important medicinal properties.

Illicium simonsii Maxim (1888) is a medicinal species of the genus Illicium in the Illiciaceae family. It is commonly used to cure gastro-frigid vomiting, cystic hernia, gas pains in the chest, and scabies as folk medicine. To utilize its resources efficiently, the complete chloroplast genome of I. simonsii was sequenced, assembled, and annotated by using high-throughput sequencing data. The complete chloroplast genome was 143,038 bp in length, with a large single-copy region (LSC) of 101,094 bp, a short single-copy region (SSC) of 20,070 bp, and a pair of inverted repeats (IRs) of 21,874 bp. A total of 113 genes were annotated, including 79 protein-coding genes, 30 tRNA genes, and four rRNA genes. The phylogenetic tree exhibited that I. simonsii and Illicium burmanicum form a sister group, and were nested in the monophyletic clade of the Illicium genus.

Tuning Molecular Packing and Boosting Self-Assembling Properties via Ring Fusion Strategy in Naphthalimide-Based A-D-A Conjugated Systems.

Two fully fused acceptor-donor-acceptor (A-D-A) architecture conjugated derivatives (NPF and NCF) comprising an electron-withdrawing naphthalimide (NMI) and two different electron-donating cores, phenanthrene and carbazole, respectively, were conveniently synthesized by bismuth(III)-catalyzed selective cyclization of vinyl ethers. Compared with their corresponding single bond-linked A-D-A molecules NPS and NCS, both having a moderately twisted aromatic configuration, the ring fusion strategy leads to fully coplanar conjugated skeletons and greatly changes the electronic structures, photophysical properties, self-assembling behaviors, and molecular packing motifs. In particular, the naphthalimide/carbazole derivative NCF exhibits intriguing 2D brickwork packing and significantly enhanced self-assembling properties.

Effects of washing agents on the mechanical and biocompatibility properties of water-washable 3D printing crown and bridge resin.

Three-dimensional (3D) printing, otherwise known as additive manufacturing in a non-technical context, is becoming increasingly popular in the field of dentistry. As an essential step in the 3D printing process, postwashing with organic solvents can damage the printed resin polymer and possibly pose a risk to human health. The development of water-washable dental resins means that water can be used as a washing agent. However, the effects of washing agents and washing times on the mechanical and biocompatibility properties of water-washable resins remain unclear. This study investigated the impact of different washing agents (water, detergent, and alcohol) and washing time points (5, 10, 20, and 30 min) on the flexural strength, Vickers hardness, surface characterization, degree of conversion, biocompatibility, and monomer elution of 3D printed samples. Using water for long-term washing better preserved the mechanical properties, caused a smooth surface, and improved the degree of conversion, with 20 min of washing with water achieving the same biological performance as organic solvents. Water is an applicable agent option for washing the 3D printing water-washable temporary crown and bridge resin in the postwashing process. This advancement facilitates the development of other water-washable intraoral resins and the optimization of clinical standard washing guidelines.