Study on Influence Mechanism of Short-Cut BF Dispersion Morphological Behavior on Concrete Properties Based on Meso Scale.

The orientation, distribution, and contact point density of BF (basalt fiber) in the concrete matrix play significant roles in the mechanical properties of BF concrete, but represent a weak point in current research. It is meaningful to study the morphological characteristics of BF in concrete. In this study, the transparent model test and joint blocking method were innovatively adopted to investigate the correlation of dosage with the BF morphological parameters and concrete mechanical properties. A focus on a BF dosage of 0-7.5 kg/m3 and the contribution index of fibers Cf was defined. Furthermore, NMR and CT techniques were used to observe the changes in the microstructure of BF concrete. The experimental results show that the BF contribution index Cf reaches the largest value when the BF content is around 3 kg/m3, approximately 2.7; in this case, the mechanical properties of BF concrete were also optimal, and the Cf was only 2.34 when the BF content was 7.5 kg/m3. NMR and CT test results show that there is a strong correlation between the BF morphological parameters and the distribution of pore structure in the concrete matrix. The overlapping contact of BF clusters led to the penetration of pores, which led the macro-pore proportion to increase dramatically. The increase in the macro-pore proportion is the main reason for the deterioration in concrete performance. In addition, these macro-pores may have adverse effects on the chloride ion permeability of BF concrete.

[Long-term Trends and Sources of Atmospheric Halocarbons at Mount Taishan, Northern China].

Halocarbons are hot topics in atmospheric environment and climate change research. Combining observational data from six field campaigns at the summit of Mount Taishan (36.25°N, 117.10°E, 1534 m above sea level) with backward trajectory and receptor source analyses, this study analyzed the long-term trends and major emission sources of halocarbons in the regional background atmosphere of the North China Plain (NCP) from 2003 to 2018. The results showed that the volume fraction of species eliminated by the Montreal Protocol (MP) showed a significant downward trend; however, the MP-controlled and unregulated species showed an overall upward trend. Meanwhile, the median volume fraction of the MP-controlled and unregulated species at Mount Taishan were significantly higher than the mid-latitude median background values in the northern hemisphere. Mount Taishan air was mainly affected by four types of air masses, of which the air mass originating from NCP accounted for the highest proportion (41%). The major sources of halocarbons were biomass/biofuel burning (38.1%), refrigeration (26.2%), industrial and domestic solvent use (21.7%), solvent use in the electronic industry (8.7%), and leakage of chlorofluorocarbon (CFCs) banks (5.3%). This study fully demonstrates that MP has been effectively implemented in China and provides evidence and recommendations to further reduce and control the volume fraction of halocarbons.

Purification and Characterization of a Thermo- and pH-Stable Laccase From the Litter-Decomposing Fungus Gymnopus luxurians and Laccase Mediator Systems for Dye Decolorization.

An extracellular laccase (GLL) was purified from fermentation broth of the litter-decomposing fungus Gymnopus luxurians by four chromatography steps, which resulted in a high specific activity of 118.82 U/mg, purification fold of 41.22, and recovery rate of 42.05%. It is a monomeric protein with a molecular weight of 64 kDa and N-terminal amino acid sequence of AIGPV TDLHI, suggesting that GLL is a typical fungal laccase. GLL demonstrated an optimum temperature range of 55°C-65°C and an optimum pH 2.2 toward 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS). It displayed considerably high thermostability and pH stability with about 63% activity retained after 24 h at 50°C, and 86% activity retained after 24 h at pH 2.2, respectively. GLL was significantly enhanced in the presence of K+, Na+, and Mg2+ ions. It demonstrated K m of 539 µM and k cat /K m of 140 mM-1⋅s-1 toward ABTS at pH 2.2 and 37°C. Acetosyringone (AS) and syringaldehyde (SA) were the optimal mediators of GLL (0.4 U/ml) for dye decolorization with decolorization rates of about 60%-90% toward 11 of the 14 synthetic dyes. The optimum reaction conditions were determined to be mediator concentration of 0.1 mM, temperature range of 25°C -60°C, and pH 4.0. The purified laccase was the first laccase isolated from genus Gymnopus with high thermostability, pH stability, and effective decolorization toward dyes, suggesting that it has potentials for textile and environmental applications.

Synthesis, Characterization, DNA/HSA Interactions, and Anticancer Activity of Two Novel Copper(II) Complexes with 4-Chloro-3-Nitrobenzoic Acid Ligand.

The purpose of this study was to identify new metal-based anticancer drugs; to this end, we synthesized two new copper(II) complexes, namely [Cu(ncba)4(phen)] (1) and [Cu(ncba)4(bpy)] (2), comprised 4-chloro-3-nitrobenzoic acid as the main ligand. The single-crystal XRD approach was employed to determine the copper(II) complex structures. Binding between these complexes and calf thymus DNA (CT-DNA) and human serum albumin (HSA) was explored by electronic absorption, fluorescence spectroscopy, and viscometry. Both complexes intercalatively bound CT-DNA and statically and spontaneously quenched DNA/HSA fluorescence. A CCK-8 assay revealed that complex 1 and complex 2 had substantial antiproliferative influences against human cancer cell lines. Moreover, complex 1 had greater antitumor efficacy than the positive control cisplatin. Flow cytometry assessment of the cell cycle demonstrated that these complexes arrested the HepG2 cell cycle and caused the accumulation of G0/G1-phase cells. The mechanism of cell death was elucidated by flow cytometry-based apoptosis assays. Western blotting revealed that both copper(II) complexes induced apoptosis by regulating the expression of the Bcl-2(Bcl-2, B cell lymphoma 2) protein family.

An Inulin-Specific Lectin with Anti-HIV-1 Reverse Transcriptase, Antiproliferative, and Mitogenic Activities from the Edible Mushroom Agaricus bitorquis.

A novel lectin (ABL) was purified from the dried fruiting bodies of Agaricus bitorquis. An efficient 3-step purification protocol involved two consecutive steps of ion exchange chromatography on Q-Sepharose and SP-Sepharose and gel filtration by FPLC on Superdex 75. ABL is a monomeric protein with the molecular mass of 27.6 kDa, which is different from other lectins from genus Agaricus. Its N-terminal amino acid sequence is EYTISIRVYQTNPKGFNRPV which is unique and sharing considerably high similarity of other mushroom lectins. The hemagglutinating activity of the lectin was inhibited by inulin. Based on hemagglutination tests, ABL prefers rabbit, human type A, and AB erythrocytes to human type B and O erythrocytes. The lectin inhibits the activity of HIV-1 reverse transcriptase and the proliferation of leukemia cell (L1210) with an IC50 value of 4.69 and 4.97 µM, respectively. Furthermore, ABL demonstrates the highest mitogenic activity with a response of 24177.7 ± 940.6 [3H-methyl] thymidine counts per minute (CPM) at a concentration of 0.91 µM.

Construction of a trifunctional cellulase and expression in Saccharomyces cerevisiae using a fusion protein.

BACKGROUND: Cellulose is the most important component of lignocellulose, and its degradation requires three different types of enzymes to act synergistically. There have been reports of single gene duality, but no gene has been described to have more than two functions. Cloning and expression of fusion cellulases containing more than two kinds of catalytic domains has not been reported thus far. RESULTS: We synthesized three different cellulase genes and linked the three catalytic domains with a (G4S)3 flexible linker. The trifunctional cellulase gene (BCE) containing three types of cellulase functions was constructed and expressed in S. cerevisiae successfully. The ß-glucosidase, the exoglucanase and the endoglucanase activity of the trifunctional cellulase BCE reached 16.80 IU/mg, 2.26 IU/mg and 20.67 IU/mg, which was 46.27, 6.73 and 46.20% higher than the activities of the ß-glucosidase BG, the endoglucanase CBH and the endoglucanase EG. The filter paper enzyme activity of BCE was higher than those of BG, CBH and EG, reached 2.04 IU/mg. CONCLUSIONS: The trifunctional cellulase BCE was designed based on ß-glucosidase BG, endoglucanase EG and exoglucanase CBH, and it possessed ß-glucosidase activity, endoglucanase activity and exoglucanase activity simultaneously. The BCE has better filter paper activity, it means the potential practical application.

Construction of recombinant Yarrowia lipolytica and its application in bio-transformation of lignocellulose.

Lignocellulose is a polysaccharide and an abundant biomass resource that widely exists in grains, beans, rice, and their by-products. Over 10 million tons of lignocellulose resources and processing products are produced every year in China. Three recombinant Y. lipolytica strains with cellulase (ß-glucosidase, endoglucanase and cellobiohydrolase) were constructed. The enzymatic activities of these enzymes were 14.181 U/mL, 16.307 U/mL, and 17.391 U/mL, respectively. The whole cell cellulases were used for a stover bio-transformation. The celluloses in the stover were partly degraded by the cellulases, and the degradation products were transformed into single cell protein (SCP) by the Y. lipolytica cells. After 15 d of fermentation with the whole cell cellulases, the protein content of the maize stover and the rice straw reached 16.23% and 14.75%, which increased by 168.26% and 161.52% compared with the control, respectively. This study provides a new stage for the efficient utilization of stover in the feed industry.

Synergistic effect of cellulase and xylanase during hydrolysis of natural lignocellulosic substrates.

Synergistic combination of cellulase and xylanase has been performed on pre-treated substrates in many previous studies, while few on natural substrates. In this study, three unpretreated lignocellulosic substrates were studied, including corncob, corn stover, and rice straw. The results indicated that when the mixed cellulase and xylanase were applied, reducing sugar concentrations were calculated as 19.53, 15.56, and 17.35mg/ml, respectively, based on the 3,5 dinitrosalicylic acid (DNS) method. Compared to the treatment with only cellulose, the hydrolysis yields caused by mixed cellulase and xylanase were improved by 133%, 164%, and 545%, respectively. In addition, the conversion yield of corncob, corn stover, and rice straw by cellulase-xylanase co-treatment reached 43.9%, 48.5%, and 40.2%, respectively, based on HPLC analysis, which confirmed the synergistic effect of cellulase-xylanase that was much higher than either of the single enzyme treatment. The substrate morphology was also evaluated to explore the synergistic mechanism of cellulase-xylanase.

Simultaneous saccharification and fermentation of corncobs with genetically modified Saccharomyces cerevisiae and characterization of their microstructure during hydrolysis.

Cellulose is an abundant natural polysaccharide that is universally distributed. It can be extracted from corncobs, which are inexpensive, easily accessible, renewable, and environmentally friendly. A common strategy for effectively utilizing cellulose is efficient heterogeneous expression of cellulase genes in Saccharomyces cerevisiae. However, the improvement of cellulose utilization is a relevant issue. Based on our previous findings, we constructed an integrated secretion expression vector, pHBM368-pgk, containing a constitutive promoter sequence. Three genetically modified S. cerevisiae strains containing heterologous ß-glucosidase, exoglucanase, and endoglucanase genes were constructed. The results of a 1-L bioreactor fermentation process revealed that the mixed recombinant S. cerevisiae could efficiently carry out simultaneous saccharification and fermentation (SSF) by using corncobs as the sole carbon source. The ethanol concentration reached 6.37 g/L after 96 hours of fermentation, which was about 3 times higher than that produced by genetically modified S. cerevisiae with the inducible promoter sequence. To investigate the microstructure characteristics of hydrolyzed corncobs during the fermentation process, corncob residues were detected by using a scanning electron microscope. This study provides a feasible method to improve the effect of SSF using corncobs as the sole carbon source.