Palladium-Catalyzed Ligand-Free C-N Coupling Reactions: Selective Diheteroarylation of Amines with 2-Halobenzimidazoles.

2-Aminobenzimidazoles are widely present in a number of bioactive molecules. Generally, the preparation of these molecules could be realized by the mono-substitution of 2-halobenzimidazoles with amines. However, rare examples were reported for the di-substituted products and the selectivity of mono- vs. di-substitution was relatively low. Considering the potential values of the di-substituted products, we accomplished the first selective diheteroarylation of amines with 2-halobenzimidazoles. Notably, this Pd-catalyzed transformation was realized under ligand-free conditions. Accordingly, numerous target products were efficiently produced from various aromatic or aliphatic amines and 2-halobenzimidazoles. It was worth noting that two representative products were further confirmed by X-ray crystallography. More significantly, this catalytic process could be applied to the synthesis and discovery of new bioactive compounds, which demonstrated the synthetic usefulness of this newly developed approach.

Spectroscopy as a tool to detect multinuclear Cu(ii)-triethanolamine complexes in aqueous solution.

Complexes of Cu(ii) with triethanolamine (TEA) are widely used in aqueous precursor solutions of Cu-based catalysts and metal oxides such as YBa2Cu3O7-δ superconductors. An outstanding question is whether such complexes are multinuclear in solution. Here, we use various spectroscopic techniques to unmistakably prove the existence of such multimers. Firstly, we introduce an original approach based on NMR spectroscopy and the Evans method that establishes the existence of multimers in aqueous solution at pH 4 and higher, and allows precise monitoring of the formation of these complexes with increasing pH. Secondly, we use extended X-ray absorption fine structure (EXAFS) spectroscopy to show that a Cu-Cu interaction exists at pH 9.5, which is not observed in acidic (pH 2) solutions. Finally, NMRD measurements reveal additional structural information regarding the multinuclear complexes. Knowledge concerning the nature of Cu(ii)-TEA complexes in solution is of great relevance in view of the design of speciation models to predict the stability of copper triethanolamine-based precursor solutions.

Titania Nanocrystal Surface Functionalization through Silane Chemistry for Low Temperature Deposition on Polymers.

A method to obtain photocatalytically active thin films of anatase nanocrystals on polymer substrates was explored. Anatase nanocrystals were synthesized by a fast hydrolysis synthesis in an apolar solvent and characterized with regard to their crystallinity, size, and dispersibility and the stability of the resulting suspensions. The stable titania nanocrystal suspensions were further processed for their use in polar solvents using ligand exchange. Oleic acid was exchanged for 3-aminopropyltriethoxysilane (APTES), resulting in aqueous suspensions of charge-stabilized nanocrystals. These were adapted for use as coating suspensions for surface-treated PMMA substrates in order to obtain thin films containing anatase nanocrystals covalently coupled to the surface of the PMMA substrates. Thereby, the ligand exchange was beneficial for increasing the compatibility and durability of the inorganic/organic composite, by the formation of a covalent amide bond between the silane ligands on the nanocrystals and the carboxylic acid groups on the polymer substrate. The surface morphology, transparency, and photocatalytic activity toward the degradation of organic pollutants of the coatings, obtained through dip-coating, were evaluated.

Highly Crystalline Nanoparticle Suspensions for Low-Temperature Processing of TiO2 Thin Films.

In this work, we present preparation and stabilization methods for highly crystalline TiO2 nanoparticle suspensions for the successful deposition of transparent, photocatalytically active TiO2 thin films toward the degradation of organic pollutants by a low temperature deposition method. A proof-of-concept is provided wherein stable, aqueous TiO2 suspensions are deposited on glass substrates. Even if the processing temperature is lowered to 150-200 °C, the subsequent heat treatment provides transparent and photocatalytically active titania thin layers. Because all precursor solutions are water-based, this method provides an energy-efficient, sustainable, and environmentally friendly synthesis route. The high load in crystalline titania particles obtained after microwave heating opens up the possibility to produce thin coatings by low temperature processing, as a conventional crystallization procedure is in this case superfluous. The impact of the precursor chemistry in Ti(4+)-peroxo solutions, containing imino-diacetic acid as a complexing ligand and different bases to promote complexation was studied as a function of pH, reaction time and temperature. The nanocrystal formation was followed in terms of colloidal stability, crystallinity and particle size. Combined data from Raman and infrared spectroscopy, confirmed that stable titanium precursors could be obtained at pH levels ranging from 2 to 11. A maximum amount of 50.7% crystallinity was achieved, which is one of the highest reported amounts of anatase nanoparticles that are suspendable in stable aqueous titania suspensions. Decoloring of methylene blue solutions by precipitated nanosized powders from the TiO2 suspensions proves their photocatalytic properties toward degradation of organic materials, a key requisite for further processing. This synthesis method proves that the deposition of highly crystalline anatase suspensions is a valid route for the production of photocatalytically active, transparent films on heat-sensitive substrates such as polymers.

Fast and tunable synthesis of ZrO2 nanocrystals: mechanistic insights into precursor dependence.

In this work, ZrO2 nanocrystals (NCs) are synthesized via a solvothermal treatment in benzyl alcohol, which is an established method for the synthesis of many metal oxide nanocrystals. We found that the use of microwave heating allows for a reduction in reaction time from 2 days in the autoclave to merely 4 h in the microwave. Furthermore, we were able to tune the crystallographic phase from pure cubic to pure monoclinic zirconia by changing the reaction mechanism through the use of a different zirconium precursor. Via GC-MS measurements, we found that the release of a strong acid during synthesis controls the key mechanism behind the control over crystal phase formation. The as-synthesized ZrO2 NCs (cubic or monoclinic) are small in size (3-10 nm), yet aggregated. However, aggregate-free NCs are generated through a surface-functionalization with carboxylic acid ligands, providing stabilization in apolar solvents via steric hindrance. Solution (1)H NMR was used to study the details of this post-modification step and the surface chemistry of the resulting aggregate-free NCs. This led to the conclusion that not only a different crystal structure but also a different surface chemistry is obtained, depending on the precursor composition.

Influence of aqueous precursor chemistry on the growth process of epitaxial SrTiO3 buffer layers.

In this Article, epitaxial thin films of SrTiO3 were prepared on single crystalline (100) LaAlO3 by an aqueous chemical solution deposition method. By using different chelating agents to stabilize the metal ions in water, the impact of the precursor chemistry on the microstructural and crystalline properties of the films was studied. Thorough investigation of the precursor by means of infrared and Raman spectroscopy as well as thermogravimetric analysis revealed that stable precursors can be obtained in which strontium ions can be either free in the solution or stabilized by one of the chelating agents. This stabilization of strontium ions appeared to be essential in order to obtain single phase SrTiO3 films. Precursors in which Sr(2+) remained as free ions showed SrO microcrystal segregation. Precursors in which both metal ions were stabilized gave rise to strongly textured, dense, and terraced SrTiO3 films, allowing subsequent deposition of YBa2Cu3O7-δ with superior superconducting performances.

Aqueous ZrO2 and YSZ Colloidal Systems through Microwave Assisted Hydrothermal Synthesis.

In this paper, the formation of ZrO2 and yttria-stabilised-zirconia (YSZ) aqueous colloidal systems via microwave assisted hydrothermal synthesis is studied. Microwave synthesis allows a fast screening of the influence of different parameters such as time and temperature. The temperature varied from 140 °C up to 180 °C and the used reaction time varied from 5 min up to 1 h. The synthesised zirconia nanoparticles have a particle size of 50 nm confirmed by TEM. A ¹H NMR (nuclear magnetic resonance) study helped to understand the stabilization mechanism of the synthesised particles. By the addition of ytrrium ions into the zirconia colloidal solution, YSZ could be formed via an additional thermal treatment. Hereby, the samples are heated up to 400 °C for 1 h. YSZ colloidal solutions are synthesised by making use of complexing agents such as nitrilotriacetic acid, ethylenediaminetetraacetic acid and citric acid to control the hydrolysis and condensation of both ions to avoid non-stoichiometric phases. The ratio of Zr/Y in the particles is quantified by XRF. The amorphous structure of those particles necessitates an additional thermal treatment up to 600 °C during 1 h in order to obtain crystalline YSZ.

Deposition of photocatalytically active TiO2 films by inkjet printing of TiO2 nanoparticle suspensions obtained from microwave-assisted hydrothermal synthesis.

In this paper, we present an inkjet printing approach suited for the deposition of photocatalytically active, transparent titanium oxide coatings from an aqueous, colloidal suspension. We used a bottom-up approach in which a microwave-assisted hydrothermal treatment of titanium propoxide aqueous solutions in the presence of ethylenediaminetetraacetic acid and triethanolamine was used to create suspensions containing titania nanoparticles. Different inkjet printing set-ups, electromagnetic and piezoelectric driven, were tested to deposit the inks on glass substrates. The presence of preformed titania nanoparticles was expected to make it possible to reduce the heating temperature necessary to obtain the functionality of photocatalysis which can widen the application range of the approach to heat-sensitive substrates. We investigated the crystallinity and size of the obtained nanoparticles by electron microscopy and dynamic light scattering. The rheological properties of the suspensions were evaluated against the relevant criteria for inkjet printing and the jettability was analyzed. The photocatalytic activity of the obtained layers was analyzed by following the decomposition of a methylene blue solution under UV illumination. The influence of the heat treatment temperature on the film roughness, thickness and photocatalytic activity was studied. Good photocatalytic performance was achieved for heat treatments at temperatures as low as 150 °C, introducing the possibility of using this approach for heat-sensitive substrates.

EPR and speciation simulation study of Cu2+ complexes in an amine-based aqueous precursor system used for preparation of superconducting YBCO coatings.

In this work, we investigate the chemistry for an aqueous acetate-triethanolamine-ammonia based YBa(2)Cu(3)O(7-δ) (YBCO) precursor system. These precursor solutions are suited for the chemical solution deposition of superconducting YBCO layers on top of single crystal SrTiO(3) or buffered NiW tapes. The development of this kind of precursor inks often involves trial-and-error experimenting and thus is very time-consuming. To reduce labwork to the minimum, the theoretical prediction of pH stability limits and the complexation behaviour of the different metal ions and complexants in the inks are very important. For this purpose, we simulated, based on literature values, the complexation behaviour of Cu(2+) in the aqueous precursor solutions as a function of pH. To validate the used model, we performed potentiometric pH titrations for solutions with similar composition and checked the correctness of fit between experiment and model. The generated complexometric results are coupled with X-band EPR spectra to further confirm the results. EPR spectra for fully prepared precursor solutions as well as for Cu(2+) reference solutions containing only one type of ligand (acetate, triethanolamine or ammonia) were investigated as a function of pH. We find that, in line with speciation simulation, only acetates are actively complexing the Cu(2+) ions at pH values below 7, while when reaching higher pH levels mainly triethanolamine complexes are formed. Over the entire pH range, no trace of free Cu(2+)or Cu(OH)(2), possibly creating precipitation during gelation and thus complicating further processing, could be found.

Aqueous Chemical Solution Deposition of Novel, Thick and Dense Lattice-Matched Single Buffer Layers Suitable for YBCO Coated Conductors: Preparation and Characterization.

In this work we present the preparation and characterization of cerium doped lanthanum zirconate (LCZO) films and non-stoichiometric lanthanum zirconate (LZO) buffer layers on metallic Ni-5% W substrates using chemical solution deposition (CSD), starting from aqueous precursor solutions. La2Zr2O7 films doped with varying percentages of Ce at constant La concentration (La0.5CexZr1-xOy) were prepared as well as non-stoichiometric La0.5+xZr0.5-xOy buffer layers with different percentages of La and Zr ratios. The variation in the composition of these thin films enables the creation of novel buffer layers with tailored lattice parameters. This leads to different lattice mismatches with the YBa2Cu3O7-x (YBCO) superconducting layer on top and with the buffer layers or substrate underneath. This possibility of minimized lattice mismatch should allow the use of one single buffer layer instead of the current complicated buffer architectures such as Ni-(5% W)/LZO/LZO/CeO2. Here, single, crack-free LCZO and non-stoichiometric LZO layers with thicknesses of up to 140 nm could be obtained in one single CSD step. The crystallinity and microstructure of these layers were studied by XRD, and SEM and the effective buffer layer action was studied using XPS depth profiling.

An integrated optic ethanol vapor sensor based on a silicon-on-insulator microring resonator coated with a porous ZnO film.

Optical structures fabricated on silicon-on-insulator technology provide a convenient platform for the implementation of highly compact, versatile and low cost devices. In this work, we demonstrate the promise of this technology for integrated low power and low cost optical gas sensing. A room temperature ethanol vapor sensor is demonstrated using a ZnO nanoparticle film as a coating on an SOI micro-ring resonator of 5 microm in radius. The local coating on the ring resonators is prepared from colloidal suspensions of ZnO nanoparticles of around 3 nm diameter. The porous nature of the coating provides a large surface area for gas adsorption. The ZnO refractive index change upon vapor adsorption shifts the microring resonance through evanescent field interaction. Ethanol vapor concentrations down to 100 ppm are detected with this sensing configuration and a detection limit below 25 ppm is estimated.

Elucidation of the mechanism in fluorine-free prepared YBa2Cu3O(7-delta) coatings.

In this work, the reaction mechanism used in the preparation of fluorine-free superconducting YBa(2)Cu(3)O(7-delta) (YBCO) was investigated. To determine which precursor interactions are dominant, a comprehensive thermal analysis (thermogravimetric analysis-differential thermal analysis) study was performed. The results suggest that a three step reaction mechanism, with a predominant role for BaCO(3), is responsible for the conversion of the initial state to the superconducting phase. In the presence of CuO, the decarboxylation of BaCO(3) is kinetically favored with the formation of BaCuO(2) as a result. BaCuO(2) reacts with the remaining CuO to form a liquid which ultimately reacts with Y(2)O(3) in a last step to form YBCO. High temperature X-ray diffraction experiments confirm that these results are applicable for thin film synthesis prepared from an aqueous fluorine-free sol-gel precursor.

In situ observation of rapid ligand exchange in colloidal nanocrystal suspensions using transfer NOE nuclear magnetic resonance spectroscopy.

Recently, solution NMR-based approaches have been developed that represent useful new tools for the in situ characterization of the capping ligand in colloidal nanocrystal dispersions. So far, this development has focused mainly on tightly bound ligands (no exchange) or ligands in slow exchange with the nanocrystal surface. In such systems, the ligand can be identified and its amount and interaction quantified via 1D (1)H NMR, (1)H-(13)C HSQC, and DOSY spectra. Here, we explore the case where capping ligands are in fast exchange with the nanocrystal surface. Using dodecylamine-stabilized CdTe (Q-CdTe|DDA) and octylamine-stabilized ZnO (Q-ZnO|OctA) nanoparticles, we first show that the NMR methods developed so far fail to evidence the bound ligand when the effect of the latter on the exchange-averaged parameters is marginalized by an excess of free ligand. Next, transfer NOE spectroscopy, a well-established technique in biomolecular NMR, is introduced to demonstrate and characterize the interaction of a ligand with the nanocrystal surface. Using Q-PbSe nanocrystals capped with oleic acids as a reference system, we show that bound and free ligands have strongly different NOE spectra wherein only bound ligands develop strong and negative NOEs. For the Q-CdTe|DDA system, transfer NOE spectra show a similar rapid appearance of strong, negative NOEs, thereby unambiguously demonstrating that DDA molecules spend time at the nanocrystal surface. In the case of Q-ZnO|OctA, where a more complex mixture is analyzed, transfer NOE spectroscopy allows distinguishing capping from noncapping molecules, thereby demonstrating the screening potential offered by this technique for colloidal quantum dot dispersions.

The growth of Co:ZnO/ZnO core/shell colloidal quantum dots: changes in nanocrystal size, concentration and dopant coordination.

We report a synthesis route for the growth of Co:ZnO/ZnO core/shell quantum dots. This procedure consists of successive steps, comprising the addition of diluted precursor salt solutions, and heat treatment at 50 degrees C. By deriving a relation between the extinction coefficient at 250 nm and the nanocrystal diameter, we are able to monitor changes in quantum dot concentration during shell growth. We found that a mechanism based on the nucleation of new particles after salt addition and subsequent Ostwald ripening during the heat treatment is responsible for the shell growth. Based on ligand-field absorption spectroscopy, we demonstrate that the Co(2+) ions adsorbed at the surface of Co:ZnO quantum dots are incorporated inside the ZnO shells. Finally, EPR spectroscopy indicates that the surface-adsorbed Co(2+) ions can be incorporated as substitutional as well as interstitial Co(2+) ions.