3Y-TZP/Ta Biocermet as a Dental Material: An Analysis of the In Vitro Adherence of Streptococcus Oralis Biofilm and an In Vivo Pilot Study in Dogs.

The surface adhesion of bacterial cells and the in vivo biocompatibility of a new ceramic-metal composite made of zirconium dioxide and tantalum were evaluated. Within the framework of an in vitro study using the crystal violet staining and colony counting methods, a relatively similar adhesion of Streptococcus oralis to the 3Y-TZP/Ta biocermet (roughness Ra = 0.12 ± 0.04 µm) and Ti-Al6-V4 titanium alloy (Ra = 0.04 ± 0.01 µm) was found. In addition, in an in vivo preliminary study focused on the histological analysis of a series of rods implanted in the jaws of beagle dogs for a six-month period, the absence of any fibrous tissue or inflammatory reaction at the interface between the implanted 3Y-TZP/Ta biocermets and the new bone was found. Thus, it can be concluded that the developed ceramic-metal biocomposite may be a promising new material for use in dentistry.

New Ceramic Multi-Unit Dental Abutments with an Antimicrobial Glassy Coating.

The choice of suitable materials and new designs in oral implantology and the subsequent enhancement of the characteristics of the dental implant developed is an important research topic with wide scope. The present work aims to develop a new multifunctional zirconia-ceria/alumina (Ce-TZP/Al2O3) composite with an antimicrobial glass-based coating to be used in multi-unit abutments compatible with commercially available Ti implants for peri-implantitis prevention. An airbrush spraying technique was effectively applied to coat the sintered ceramic composite starting from a glass powder suspension. This deposition technique was appropriate for obtaining continuous antimicrobial glass-based coatings with homogenous thickness (~35 µm) on ceramic dental implant components. The dental implant systems with the antimicrobial glassy coating were subjected to a mechanical integrity test following ISO 14801 to determine their long-term stability. The tested implant-coating structure seems to be stable under in vitro conditions with ultimate applied forces exceeding the maximum physiological occlusal loading force. This paper also presents a pilot clinical case report that shows peri-implant tissue around the mechanically stable glass coating with no signs of inflammation 1 year after implant insertion. This result is a preliminary probe of the durability and biological tolerance of the glassy material by the gingiva, as well as the antimicrobial effect on the peri-implant microbiota displayed by the coating.

Broad virus inactivation using inorganic micro/nano-particulate materials.

Inorganic materials can provide a set of tools to decontaminate solid, liquid or air containing viral particles. The use of disinfectants can be limited or not practical in scenarios where continuous cleaning is not feasible. Physicochemical differences between viruses raise the need for effective formulations for all kind of viruses. In the present work we describe two types of antimicrobial inorganic materials: i) a novel soda-lime glass (G3), and ii) kaolin containing metals nanoparticles (Ag or CuO), as materials to disable virus infectivity. Strong antiviral properties can be observed in G3 glass, and kaolin-containing nanoparticle materials showing a reduction of viral infectivity close to 99%. in the first 10 â€‹min of contact of vesicular stomatitis virus (VSV). A potent virucidal activity is also present in G3 and kaolin containing Ag or CuO nanoparticles against all kinds of viruses tested, reducing more than 99% the amount of HSV-1, Adenovirus, VSV, Influenza virus and SARS-CoV-2 exposed to them. Virucidal properties could be explained by a direct interaction of materials with viruses as well as inactivation by the presence of virucidal elements in the material lixiviates. Kaolin-based materials guarantee a controlled release of active nanoparticles with antiviral activity. Current coronavirus crisis highlights the need for new strategies to remove viruses from contaminated areas. We propose these low-cost inorganic materials as useful disinfecting antivirals in the actual or future pandemic threats.

Adding Two Antimicrobial Glasses to an Endodontic Sealer to Prevent Bacterial Root Canal Reinfection: An In Vivo Pilot Study in Dogs.

Current endodontic procedures continue to be unsuccessful for completely removing pathogens present inside the root canal system, which can lead to recurrent infections. In this study, we aimed to assess the antimicrobial capacity and tissue response of two inorganic bactericidal additives incorporated into a paste root canal sealer on contaminated root dentin in vivo. An experimental study was performed in 30 teeth of five Beagle dogs. After inducing microbiological contamination, root canal systems were treated by randomly incorporating one of two antimicrobial additives into a commercial epoxy-amine resin sealer (AH Plus), i.e., G3T glass-ceramic (n = 10) and ZnO-enriched glass (n = 10); 10 samples were randomized as a control group. After having sacrificed the animals, microbiological, radiological, and histological analyses were performed, which were complemented with an in vitro bactericidal test and characterization by field emission scanning electron microscopy. The tested groups demonstrated a non-significant microbiological reduction in the postmortem periapical index values between the control group and the bactericidal glass-ceramic group (p = 0.885), and between the control group and the ZnO-enriched glass group (p = 0.169). The histological results showed low values of inflammatory infiltrate, and a healing pattern characterized by fibrosis in 44.4% of the G3T glass-ceramic and 60.0% of ZnO-enriched glass. Bactericidal glassy additives incorporated in this root canal sealer are safe and effective in bacterial reduction.

ORIS Criteria of Success for the Zygoma-Related Rehabilitation: The (Revisited) Zygoma Success Code.

Zygomatic-related implant rehabilitation differs from traditional implant treatment in biomechanics, clinical procedures, outcomes, and eventual complications such as soft tissue incompetence or recession that may lead to recurrent sinus/soft tissue complications. The extreme maxillary atrophy that indicates the use of zygomatic implants prevents use of conventional criteria to describe implant success/failure. Currently, results and complications of zygomatic implants reported in the literature are inconsistent and lack a standardized systematic review. Moreover, protocols for the rehabilitation of the atrophic maxilla using zygomatic implants have been in continuous evolution. The current zygomatic approach is relatively new, especially if the head of the zygomatic implant is located in an extramaxillary area with interrupted alveolar bone around its perimeter. Specific criteria to describe success/survival of zygomatic implants are necessary, both to write and to read scientific literature related to zygomatic implant-based oral rehabilitations. The aim of this article was to review the criteria of success used for traditional and zygomatic implants and to propose a revisited Zygomatic Success Code describing specific criteria to score the outcome of a rehabilitation anchored on zygomatic implants. The ORIS acronym is used to name four specific criteria to systematically describe the outcome of zygomatic implant rehabilitation: offset measurement as evaluation of prosthetic positioning; rhino-sinus status report based on a comparison of presurgical and postsurgical cone beam computed tomography in addition to a clinical questionnaire; infection permanence as evaluation of soft tissue status; and stability report, accepting as success some mobility until dis-osseointegration signs appear. Based on these criteria, the assessment of five possible conditions when evaluating zygomatic implants is possible.

Influence of the Pecking Motion Frequency on the Cyclic Fatigue Resistance of Endodontic Rotary Files.

PURPOSE: To analyze the influence of the pecking motion frequency on the cyclic fatigue resistance of endodontic rotary files. MATERIAL AND METHODS: Sixty PlexV 25.06 endodontic rotary files were selected and distributed into three groups: 30 movements/min (n = 20), 60 movements/min (n = 20), and 120 movements/min (n = 20). A dynamic cyclic fatigue device was designed using Computer Aided Design/ Computer Aided Engineering (CAD/CAE) technology and manufactured by 3D impressions to simulate the pecking motion performed by an operator. Failures of the endodontic rotary files were detected by a Light-Emitting Diode (LED)/Light-Dependent Resistor (LDR) system controlled by an Arduino-Driver complex and management software. Endodontic rotary files were tested on an artificial root canal manufactured by wire electrical discharge machining (EDM), with similar dimensions to those of the instrument under examination. Endodontic rotary files were used following the manufacturer's recommendations. The results were analyzed by ANOVA and Weibull statistics. RESULTS: All pairwise comparisons revealed statistically significant differences in all three variables, except for the difference in the number of cycles between the groups with 60 and 120 movements/min (p = 0.298). The scale distribution parameter of Weibull statistics showed statistically significant differences in all three variables, except for the differences in the number of cycles between groups with 30 and 60 movements/min (p = 0.0722). No statistically significant differences in the three variables were observed for the shape distribution parameter. CONCLUSION: A low frequency of pecking motion is recommended to reduce the risk of failure of endodontic rotary files associated with cyclic fatigue.

Current state-of-the-art and future perspectives of the three main modern implant-dentistry concerns: Aesthetic requirements, mechanical properties, and peri-implantitis prevention.

The idea of permanent tooth replacement goes back to the year 2000 BC at least, when carved bamboo pegs were used to replace missing teeth in ancient China. The phenomenon of osseointegration, however, was not verified until the mid-1960s, when Branemark discovered that titanium could integrate to bone. Since then, the osseointegration capacity of implants has been profoundly investigated and implants as such have evolved enormously in all possible aspects, from material selection and processing to specific surface engineering, among many others. This review article, in particular, focuses on dental implants and aims to introduce the main concerns involved in modern dentistry, concentrating especially on the importance of finding an effective way to prevent peri-implantitis. In this sense, strategies such as shifting from metal to ceramic implant components and applying novel antimicrobial antibiotic-free coatings seem to be taking the lead. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2019.

Effect of the Medium Composition on the Zn2+ Lixiviation and the Antifouling Properties of a Glass with a High ZnO Content.

The dissolution of an antimicrobial ZnO-glass in the form of powder and in the form of sintered pellets were studied in water, artificial seawater, biological complex media such as common bacterial/yeast growth media (Luria Bertani (LB), yeast extract, tryptone), and human serum. It has been established that the media containing amino acids and proteins produce a high lixiviation of Zn2+ from the glass due to the ability of zinc and zinc oxide to react with amino acids and proteins to form complex organic compounds. The process of Zn2+ lixiviation from the glass network has been studied by X-ray photoelectron spectroscopy (XPS). From these results we can state that the process of lixiviation of Zn2+ from the glass network is similar to the one observed in sodalime glasses, where Na⁺ is lixiviated to the media first and the fraction of Zn that acts as modifiers (~2/3) is lixiviated in second place. After the subsequent collapse of the outer surface glass layer (about 200-300 nm thick layer) the dissolution process starts again. Antifouling properties against different bacteria (S. epidermidis, S. aureus, P. aeruginosa, E. coli, and M. lutea) have also been established for the glass pellets.

Performance of a New Al2O3/Ce-TZP Ceramic Nanocomposite Dental Implant: A Pilot Study in Dogs.

Although titanium remains as the prevalent material in dental implant manufacturing new zirconia-based materials that overcome the major drawbacks of the standard 3Y-yttria partially-stabilized zirconia (Y-TZP) are now emerging. In this study, a new ceramic nanocomposite made of alumina and ceria-stabilized TZP (ZCe-A) has been used to produce dental implants with the mechanic and topographic characteristics of a pilot implant design to evaluate bone and soft tissue integration in a dog model (n = 5). Histological cross-section analysis of the implanted ceramic fixations (n = 15) showed not only perfect biocompatibility, but also a high rate of osseous integration (defined as the percentage of bone to implant contact) and soft tissue attachment. This clinical success, in combination with the superior mechanical properties achieved by this Al2O3/Ce-TZP nanocomposite, may place this material as an improved alternative of traditional 3Y-TZP dental implants.

Histological response of soda-lime glass-ceramic bactericidal rods implanted in the jaws of beagle dogs.

Bacterial and fungal infections remain a major clinical challenge. Implant infections very often require complicated revision procedures that are troublesome to patients and costly to the healthcare system. Innovative approaches to tackle infections are urgently needed. We investigated the histological response of novel free P2O5 glass-ceramic rods implanted in the jaws of beagle dogs. Due to the particular percolated morphology of this glass-ceramic, the dissolution of the rods in the animal body environment and the immature bone formation during the fourth months of implantation maintained the integrity of the glass-ceramic rod. No clinical signs of inflammation took place in any of the beagle dogs during the four months of implantation. This new glass-ceramic biomaterial with inherent bactericidal and fungicidal properties can be considered as an appealing candidate for bone tissue engineering.

Evaluation in a Dog Model of Three Antimicrobial Glassy Coatings: Prevention of Bone Loss around Implants and Microbial Assessments.

OBJECTIVES: The aim of the present study is to evaluate, in a ligature-induced peri-implantitis model, the efficacy of three antimicrobial glassy coatings in the prevention of biofilm formation, intrasulcular bacterial growth and the resulting peri-implant bone loss. METHODS: Mandibular premolars were bilaterally extracted from five beagle dogs. Four dental implants were inserted on each hemiarch. Eight weeks after, one control zirconia abutment and three with different bactericidal coatings (G1n-Ag, ZnO35, G3) were connected. After a plaque control period, bacterial accumulation was allowed and biofilm formation on abutments was observed by Scanning Electron Microscopy (SEM). Peri-implantitis was induced by cotton ligatures. Microbial samples and peri-implant crestal bone levels of all implant sites were obtained before, during and after the breakdown period. RESULTS: During experimental induce peri-implantitis: colony forming units counts from intrasulcular microbial samples at implants with G1n-Ag coated abutment remained close to the basal inoculum; G3 and ZnO35 coatings showed similar low counts; and anaerobic bacterias counts at control abutments exhibited a logarithmic increase by more than 2. Bone loss during passive breakdown period was no statistically significant. Additional bone loss occurred during ligature-induce breakdown: 0.71 (SD 0.48) at G3 coating, 0.57 (SD 0.36) at ZnO35 coating, 0.74 (SD 0.47) at G1n-Ag coating, and 1.29 (SD 0.45) at control abutments; and statistically significant differences (p<0.001) were found. The lowest bone loss at the end of the experiment was exhibited by implants dressing G3 coated abutments (mean 2.1; SD 0.42). SIGNIFICANCE: Antimicrobial glassy coatings could be a useful tool to ward off, diminish or delay peri-implantitis progression.

Bone loss at implant with titanium abutments coated by soda lime glass containing silver nanoparticles: a histological study in the dog.

The aim of the present study was to evaluate bone loss at implants connected to abutments coated with a soda-lime glass containing silver nanoparticles, subjected to experimental peri-implantitis. Also the aging and erosion of the coating in mouth was studied. Five beagle dogs were used in the experiments. Three implants were placed in each mandible quadrant: in 2 of them, Glass/n-Ag coated abutments were connected to implant platform, 1 was covered with a Ti-mechanized abutment. Experimental peri-implantitis was induced in all implants after the submarginal placement of cotton ligatures, and three months after animals were euthanatized. Thickness and morphology of coating was studied in abutment cross-sections by SEM. Histology and histo-morphometric studies were carried on in undecalfied ground slides. After the induced peri-implantitis: 1.The abutment coating shown losing of thickness and cracking. 2. The histometry showed a significant less bone loss in the implants with glass/n-Ag coated abutments. A more symmetric cone of bone resorption was observed in the coated group. There were no significant differences in the peri-implantitis histological characteristics between both groups of implants. Within the limits of this in-vivo study, it could be affirmed that abutments coated with biocide soda-lime-glass-silver nanoparticles can reduce bone loss in experimental peri-implantitis. This achievement makes this coating a suggestive material to control peri-implantitis development and progression.

Inhibitory effect on in vitro Streptococcus oralis biofilm of a soda-lime glass containing silver nanoparticles coating on titanium alloy.

This paper reports the effect of soda-lime-glass-nAg coating on the viability of an in vitro biofilm of Streptococcus oralis. Three strains (ATCC 35037 and two clinical isolates from periodontitis patients) were grown on coated with glass, glass containing silver nanoparticles, and uncoated titanium alloy disks. Two different methods were used to quantify biofilm formation abilities: crystal violet staining and determination of viable counts. The influence of the surface morphology on the cell attachment was studied. The surface morphology was characterized by scanning electron microscopy (SEM) and using a profilometer. SEM was also used to study the formation and the development of biofilm on the coated and uncoated disks. At least a >99.7% inocula reduction of biofilm respect to titanium disks and also to glass coated disks was observed in the glass-nAg coated disks for all the studied strains. A quantitative evaluation of the release of silver was conducted in vitro to test whether and to what extend the biocidal agent (silver) could leach from the coating. These findings suggest that the biofilm formation of S. oralis strains is highly inhibited by the glass-nAg and may be useful for materials which require durable antibacterial effect on their surfaces, as it is the case of dental implants.

Correlation between clinical parameters characterising peri-implant and periodontal health: a practice-based research in Spain in a series of patients with implants installed 4-5 years ago.

OBJECTIVES: To explore peri-implant health (and relation with periodontal status) 4-5 years after implant insertion. STUDY DESIGN: A practice-based dental research network multicentre study was performed in 11 Spanish centres. The first patient/month with implant insertion in 2004 was considered. Per patient four teeth (one per quadrant) showing the highest bone loss in the 2004 panoramic X-ray were selected for periodontal status assessment. Bone losses in implants were calculated as the differences between 2004 and 2009 bone levels in radiographs. RESULTS: A total of 117 patients were included. Of the 408 teeth considered, 73 (17.9%) were lost in 2009 (losing risk: >50% for bone losses ≥7 mm). A total of 295 implants were reviewed. Eight of 117 (6.8%) patients had lost implants (13 of 295 implants installed; 4.4%). Implant loss rate (quadrant status) was 1.4% (edentulous), 3.6% (preserved teeth), and 11.1% (lost teeth) (p=0.037). The percentage of implant loss significantly (p<0.001) increased when the medial/distal bone loss was ≥3 mm. The highest (p≤0.001) pocket depths were found in teeth with ≥5 mm and implants with ≥3 mm bone losses, with similar mean values (≥4 mm), associated with higher rates of plaque index and bleeding by probing. CONCLUSIONS: The significant bi-directional relation between plaque and bone loss, and between each of these two parameters/signs and pocket depths or bleeding (both in teeth and implants, and between them) together with the higher percentage of implants lost when the bone loss of the associated teeth was ≥3 mm suggest that the patient's periodontal status is a critical issue in predicting implant health/lesion.

Radiologic evaluation of bone loss at implants with biocide coated titanium abutments: a study in the dog.

The objective of the present study is to evaluate bone loss at implant abutments coated with a soda-lime glass containing silver nanoparticles subjected to experimental peri-implantitis. Five beagle dogs were used in the experiments, 3 implants were installed in each quadrant of the mandibles. Glass/n-Ag coted abutments were connected to implant platform. Cotton floss ligatures were placed in a submarginal position around the abutment necks and the animals were subject to a diet which allowed plaque accumulation, and after 15 weeks the dogs were sacrificed. Radiographs of all implant sites were obtained at the beginning and at the end of the experimentally induced peri-implantitis. The radiographic examination indicated that significant amounts of additional bone loss occurred in implants without biocide coating, considering both absolute and relative values of bone loss. Percentages of additional bone loss observed in implants dressed with a biocide coated abutment were about 3 times lower (p<0.006 distal aspect; and p<0.031 at mesial aspect) than the control ones. Within the limits of the present study it seems promising the use of soda-lime glass/nAg coatings on abutments to prevent peri-implant diseases.

Gestión de infección odontogénica de origen pulpar y periodontal / Management of odontogenic infection of pulpal and periodontal origin

La biopelícula dental es un ecosistema bacteriano complejo cuya evolución, maduración y desarrollo ocasiona la infecciónodontogénica. Habitualmente la infección se encuentra localizada en los tejidos del propio órgano dentario y sigue un curso evolutivo crónico, aunque la expresión de factores de virulencia bacterianos en la biopelícula o cambios en la situación inmune del huésped pueden ocasionar exacerbaciones clínicas y la extensión de la infección a otras zonas del organismo. En el abordaje de la infección odontogénica debemos tener presente que el éxito terapéutico radica en el control del agente etiológico infeccioso, mediante desbridamiento con técnicas mecánico-quirúrgicas y/o administraciónde antimicrobianos. El efecto de las técnicas de desbridamiento sobre la biopelícula es fundamentalmente de tipo cuantitativo (disminuye el tamaño del inóculo) de modo que su empleo como único medio de control de la infección puede suponer la persistencia de odontopatógenos y la recurrencia o cronificación del proceso, aunque obtengamos una mejoría clínica inicial que en ocasiones consideramos éxito terapéutico de modo precipitado. Realizar un estudio micro-biológico podría ayudar a definir el éxito terapéutico con mayor fiabilidad, dar más exactitud a nuestros pronósticos de recurrencia, y seleccionar el antibiótico más apropiado aumentando la eficacia terapéutica. El tratamiento antimicrobiano ocasiona un cambio cuantitativo y cualitativo en la composición bacteriana de la biopelícula, además de poder actuar en lugares no accesibles al desbridamiento mecánico. Sin embargo, un mal uso de los antimicrobianos puede ocasionar selección de especies bacterianas resistentes en la biopelícula además de efectos secundarios y alteraciones ecológicas en el huésped. Para minimizar este riesgo y obtener el máximo rendimiento del empleo de antimicrobianos es preciso conocer las situaciones clínicas que indican su uso y la eficacia de los distintos antibióticos frente a los aislados en la infección odontogénica

The dental biofilm is a complex bacterial ecosystem that undergoes evolution, maturing and development, and thus leads to odontogenic infection. The infection is normally located in the tissues of the dental organ itself, and follows a chronic course of evolution. However, bacterial pathogens express virulence factors in the biofilm, and this together with changesin host immunity, may cause clinical exacerbations and spread of infection to other areas of the body. Odontogenic infection management should take into consideration the fact that therapeutic success lies in the control of the infectious aetiologic agent, using mechanical-surgical debridement and/or antimicrobial therapy. Debridement techniques have a fundamentally quantitative effect (by reducing the size of the inoculum) and therefore if these techniques are used alone to control infection, despite an initial clinical improvement that is sometimes prematurely considered as therapeutic success, odontopathogens may persist and the process may recur or become chronic. Microbiological examination may be helpful in defining therapeutic success in a more reliable way, it could define the prognosis of recurrence more precisely, and could enable the most appropriate antibiotic to be selected, thus increasing therapeutic efficacy. Antimicrobial therapy brings about a quantitative and qualitative change in the bacterial composition of the biofilm, in addition to being able to act on sites that are inaccessible through mechanical debridement. However, incorrect antimicrobial use can lead to a selection of resistant bacterial species in the biofilm, in addition to side effects and ecological alterations in the host. In order to minimise this risk, and obtain maximum antimicrobial effect, we need to know in which clinical situations their use is indicated, and the efficacy of different antibiotics with regard to bacteria isolated in odontogenic infection

Management of odontogenic infection of pulpal and periodontal origin.

The dental biofilm is a complex bacterial ecosystem that undergoes evolution, maturing and development, and thus leads to odontogenic infection. The infection is normally located in the tissues of the dental organ itself, and follows a chronic course of evolution. However, bacterial pathogens express virulence factors in the biofilm, and this together with changes in host immunity, may cause clinical exacerbations and spread of infection to other areas of the body. Odontogenic infection management should take into consideration the fact that therapeutic success lies in the control of the infectious aetiologic agent, using mechanical-surgical debridement and/or antimicrobial therapy. Debridement techniques have a fundamentally quantitative effect (by reducing the size of the inoculum) and therefore if these techniques are used alone to control infection, despite an initial clinical improvement that is sometimes prematurely considered as therapeutic success, odontopathogens may persist and the process may recur or become chronic. Microbiological examination may be helpful in defining therapeutic success in a more reliable way, it could define the prognosis of recurrence more precisely, and could enable the most appropriate antibiotic to be selected, thus increasing therapeutic efficacy. Antimicrobial therapy brings about a quantitative and qualitative change in the bacterial composition of the biofilm, in addition to being able to act on sites that are inaccessible through mechanical debridement. However, incorrect antimicrobial use can lead to a selection of resistant bacterial species in the biofilm, in addition to side effects and ecological alterations in the host. In order to minimise this risk, and obtain maximum antimicrobial effect, we need to know in which clinical situations their use is indicated, and the efficacy of different antibiotics with regard to bacteria isolated in odontogenic infection.