Comparison of direct analysis in real-time mass spectrometry, atmospheric solids analysis probe-mass spectrometry, and ion mobility spectrometry for ensuring food safety by rapid screening of poppy seeds.

The opium poppy (Papaver somniferum) is a global commercial crop that has been historically valued for both medicinal and culinary purposes. Naturally occurring opium alkaloids including morphine, codeine, thebaine, noscapine, and papaverine are found primarily in the latex produced by the plant. If the plant is allowed to fully mature, poppy seeds that do not contain the opium alkaloids will form within the pods and may be used in the food industry. It is possible for the seeds to become contaminated with alkaloids by the latex during harvesting, posing a potential health risk for consumers. In the USA, there have been more than 600 reported adverse events including 19 fatalities that may be linked to the consumption of a contaminated poppy-containing product such as home-brewed poppy seed tea. Unwashed poppy seeds and pods may be purchased over the Internet and shipped worldwide. The Forensic Chemistry Center, US Food and Drug Administration (FDA) has evaluated several mass spectrometers (MS) capable of rapid screening to be used for high-throughput analysis of samples such as poppy seeds. These include a direct analysis in real-time (DART) ambient ionization source coupled to a single-quadrupole MS, an atmospheric solids analysis probe (ASAP) ionization source coupled to the same MS, and ion mobility spectrometers (IMS). These instruments have been used to analyze 17 poppy seed samples for the presence of alkaloids, and the results were compared to data obtained using liquid chromatography with mass spectral detection (LC-MS/MS). Results from the 17 poppy seed samples indicate that the DART-MS, ASAP-MS, and IMS devices detect many of the same alkaloids confirmed during the LC-MS/MS analyses, although both the false-positive and false-negative rates are higher, possibly due to the non-homogeneity of the samples and the lack of chromatographic separation.

Rapid screening of 2-benzylbenzimidazole nitazene analogs in suspect counterfeit tablets using Raman, SERS, DART-TD-MS, and FT-IR.

Developing methods to rapidly screen for novel synthetic 2-benzylbenzimidazole opioids, also known as nitazenes, has become increasingly important due to their high potency. These compounds have potency comparable or exceeding that of fentanyl by up to 10 times and have been implicated in approximately 5% of all drug overdose deaths in the United States in 2021. This paper details the authenticity determination of suspect tablets and the identification of three nitazene analogs (N-pyrrolidino etonitazene, isotonitazene, and etodesnitazene) in suspect tablets seized at a mail facility using Raman and surface-enhanced Raman scattering (SERS) with handheld devices, portable Fourier transform infrared spectrometer (FT-IR), and a direct analysis in real-time ambient ionization coupled to a thermal desorption unit and a mass spectrometer (DART-TD-MS). These methods are rapid and excellent for screening opioids in suspect tablets but could not fully determine the exact structure of some of the nitazene analogs present due to spectral similarities or similar fragmentation patterns. Liquid chromatography-mass spectrometry (LC-MS) confirmed the presence of these nitazene compounds in addition to other opioids/drugs that were in trace quantities. The quantitative high-performance liquid chromatography coupled with ultraviolet (HPLC-UV) detection experiments determined that the suspect tablets contained an average of 0.817 mg of N-pyrrolidino etonitazene per tablet. The results obtained reveal that the simultaneous deployment of these complementary and orthogonal portable analytical techniques as part of a workflow allows suspect tablets to be screened and nitazene-type drugs to be identified in suspect counterfeit tablets at remote sampling sites.

Identification of the designer steroid 17ß-hydroxy 5α-androst-1-en-3-one cypionate in an injectable liquid.

In the screening of an injectable liquid marketed for body building, a steroid resembling 1-testosterone was found. The compound of interest was isolated using HPLC-UV detection coupled to an analytical scale fraction collector and subsequently characterized using HRAM-MS, NMR spectrometry, and GC-MS. The designer steroid was identified as 17ß-hydroxy 5α-androst-1-en-3-one cypionate, an analog of 1-testosterone that had not been reported.

Evaluation of four field portable devices for the rapid detection of mitragynine in suspected kratom products.

The development of a method for the rapid screening of food and drug products for constituents such as mitragynine, the most abundant alkaloid found in Mitragyna speciosa (kratom) plant leaves, has become increasingly important. The use of kratom is said to produce stimulant or narcotic effects and poses risks of addiction, abuse, and dependence, much like other opioids. Direct Analysis in Real Time with thermal desorption mass spectrometry (DART-TD-MS), hand-held mass spectrometry, portable ion mobility spectrometry (IMS), and portable Fourier-transform infrared spectroscopy (FT-IR) were each evaluated as field-deployable screening techniques for the detection of mitragynine in food and drug products. These devices offer the potential for rapid, early detection of mitragynine in suspect products entering the United States through international mail facilities and other ports of entry. Ninety-six kratom products, including capsules, bulk powder, and bulk plant material, were analyzed by either direct sampling of the solid material or by solvent extraction. True and false positive and negative results are reported, based on comparison to results from qualitative screening using gas chromatography with mass spectral detection (GC-MS), liquid chromatography with mass spectral detection (LC-MS), and/or quantitative screening using high-performance liquid chromatography with ultraviolet detection (HPLC-UV), with a discussion of the assessment of each technique for use in the field. Each device demonstrated attributes that would be favorable for use in screening of suspected mitragynine-containing products at places like ports of entry, and simultaneous deployment of two or more of these devices as part of a workflow would be the most effective for rapid screening of these products. This combination of rapid screening orthogonal techniques suited to a non-laboratory environment will allow onsite destruction of products found to contain mitragynine.

Detection of Mitragynine in Mitragyna Speciosa (Kratom) Using Surface-Enhanced Raman Spectroscopy with Handheld Devices.

A simple, quick, selective, sensitive, and effective field-friendly method capable of being used by nonexperts has been developed for detecting mitragynine in Mitragyna speciosa (kratom) using surface-enhanced Raman spectroscopy (SERS). Over 100 samples and blanks (known to be either positive or negative for the presence of mitragynine) were examined in duplicate using five identical handheld Raman spectrometers, which provided a data set of over 1,000 examinations. Based on the results of these analyses, the method yielded a true-positive rate of 99.3%, a true-negative rate of 97.9%, a false-positive rate of 2.1%, and a false-negative rate of 0.7%. The average minimum detectable concentration (Cm ) of mitragynine that reproducibly yielded a match for one of the library spectra on all five instruments was determined to be 342 ng/mL (ppb). This Cm value is a conservative estimate considering that the extraction process was not fully optimized by this study, which was not necessary since the Cm value achieved was well below typical mitragynine concentrations in kratom (1.3-2.3%). The method is ideal (i) for prioritizing samples for additional testing using other more time-consuming laboratory-based techniques needed to detect and quantify mitragynine and (ii) for field use at international mail facility (IMF) satellite laboratories to help interdict kratom and prevent this dangerous product from reaching the U.S. supply chain.

Identification of the designer steroid Androsta-3,5-diene-7,17-dione in a dietary supplement.

A liquid chromatography-mass spectrometry (LC-MS) screen for known anabolic-androgenic steroids in a dietary supplement product marketed for "performance enhancement" detected an unknown compound having steroid-like spectral characteristics. The compound was isolated using high performance liquid chromatography with ultraviolet detection (HPLC-UV) coupled with an analytical scale fraction collector. After the compound was isolated, it was then characterized using gas chromatography with simultaneous Fourier Transform infrared detection and mass spectrometry (GC-FT-IR-MS), liquid chromatography-high resolution accurate mass-mass spectrometry (LC-HRAM-MS) and nuclear magnetic resonance (NMR). The steroid had an accurate mass of m/z 285.1847 (error-0.57 ppm) for the protonated species [M + H]+ , corresponding to a molecular formula of C19 H24 O2 . Based on the GC-FT-IR-MS data, NMR data, and accurate mass, the compound was identified as androsta-3,5-diene-7,17-dione. Although this is not the first reported identification of this designer steroid in a dietary supplement, the data provided adds information for identification of this compound not previously reported. This compound was subsequently detected in another dietary supplement product, which contained three additional active ingredients.

Semi-quantitative determination of designer steroids by high-performance liquid chromatography with ultraviolet detection in the absence of reference material.

New designer steroids are continually being encountered in dietary supplements that claim to increase muscle mass, but quantitative analysis of such ingredients is challenging due to the availability, quality, or cost of commercial reference materials. Although standard reference material typically becomes available for these emerging compounds, laboratories often face the challenge of finding properly certified materials from accredited suppliers, due to traceability requirements. Several of these designer steroids have been isolated and identified using multiple structural elucidation tools. Structural characteristics of these compounds of interest were evaluated and molar absorptivity data was collected and compared to several readily available steroid standards using ultraviolet/visible spectroscopy. This approach was used to find suitable compounds for use as surrogate reference materials in the semi-quantitative determination of two designer steroids, 1-dehydroepiandrosterone (1-androsterone) and 6ß-chloro-4-androsten-17ß-ol-3-one (6ß-chlorotestosterone). Laboratory-fortified matrix samples and dietary supplement samples were analyzed using this method for the estimation of 1-androsterone and 6ß-chlorotestosterone by HPLC-UV. Assay values obtained for the estimation of 1-androsterone in a dietary supplement sample using a prasterone or dehydroepiandrosterone (DHEA) standard curve were 100% of those obtained using a 1-androsterone reference standard, once it became commercially available. Estimations for 6ß-chlorotestosterone in laboratory-fortified matrix samples using a testosterone standard curve were 92%-93% of those obtained using isolated 6ß-chlorotestosterone as "reference material."

Identification of the anabolic steroid 6ß-chlorotestosterone in a dietary supplement.

Capsules that were labeled to be performance-enhancing dietary supplements obtained during an investigation were found to contain an unrecognized steroid-like substance. This compound was isolated by liquid chromatography (LC) fraction collection and characterized using several qualitative analytical techniques, including ultraviolet (UV) spectroscopy, gas chromatography-mass spectrometry (GC-MS), liquid chromatography-high resolution accurate mass-mass spectrometry (LC-HRAM-MS), as well as 1 H, 13 C, and two-dimensional nuclear magnetic resonance (NMR) spectrometry. This multi-technique analytical approach was used to identify the designer steroid as 6ß-chloro-4-androsten-17ß-ol-3-one (6ß-chlorotestosterone), an analog of testosterone about which little has been published.

Isolation and structural characterization of a new tadalafil analog (chloropropanoylpretadalafil) found in a dietary supplement.

A screen for known PDE-5 inhibitors in a dietary supplement product marketed for "enhanced sexual performance" detected a compound that structurally resembled chloropretadalafil, a known analog of tadalafil. The compound was isolated from the supplement matrix using high performance liquid chromatography with ultraviolet detection (HPLC-UV) and a fraction collector, and was further characterized using gas chromatography with Fourier Transform infrared detection and mass spectral detection (GC/FT-IR/MS), as well as high resolution mass spectrometry (HRMS). The analog had an accurate mass of m/z 441.1216 (error is 0.8706ppm) for the protonated species [M+H](+), corresponding to a molecular formula of C23H22ClN2O5. HRAM and GC/FT-IR/MS mass spectral fragmentation data suggested that the modification is a chloropropanoyl moiety extending from the nitrogen on the piperidine ring of chloropretadalafil. The proposed new analog has been named chloropropanoylpretadalafil.