Pyrene-Appended Boronic Acids on Graphene Foam Electrodes Provide Quantum Capacitance-Based Molecular Sensors for Lactate.

Molecular recognition and sensing can be coupled to interfacial capacitance changes on graphene foam surfaces linked to double layer effects and coupled to enhanced quantum capacitance. 3D graphene foam film electrodes (Gii-Sens; thickness approximately 40 µm; roughness factor approximately 100) immersed in aqueous buffer media exhibit an order of magnitude jump in electrochemical capacitance upon adsorption of a charged molecular receptor based on pyrene-appended boronic acids (here, 4-borono-1-(pyren-2-ylmethyl)pyridin-1-ium bromide, or abbreviated T1). This pyrene-appended pyridinium boronic acid receptor is employed here as a molecular receptor for lactate. In the presence of lactate and at pH 4.0 (after pH optimization), the electrochemical capacitance (determined by impedance spectroscopy) doubles again. Lactic acid binding is expressed with a Hillian binding constant (Klactate = 75 mol-1 dm3 and α = 0.8 in aqueous buffer, Klactate = 460 mol-1 dm3 and α = 0.8 in artificial sweat, and Klactate = 340 mol-1 dm3 and α = 0.65 in human serum). The result is a selective molecular probe response for lactic acid with LoD = 1.3, 1.4, and 1.8 mM in aqueous buffer media (pH 4.0), in artificial sweat (adjusted to pH 4.7), and in human serum (pH adjusted to 4.0), respectively. The role of the pyrene-appended boronic acid is discussed based on the double layer structure and quantum capacitance changes. In the future, this new type of molecular capacitance sensor could provide selective enzyme-free analysis without analyte consumption for a wider range of analytes and complex environments.

Non-covalent π-π functionalized Gii-senseⓇ graphene foam for interleukin 10 impedimetric detection.

Monitoring Interleukin 10 (IL-10) is essential for understanding the vast responses of T-cells in cancer, autoimmunity, and internal homeostasis after physical stress. However, current diagnostic methods are complex and more focused on medical screening rather than point-of-care monitoring. Biosensors based on graphene's conductivity and flexibility are attractive to offer simple single-use and reduced handling. However, oxidation of its carbon lattice to develop functional moieties for biomolecule immobilization cuts down its electronic conductivity potential. In this work, the authors present a microfluidic lab-on-chip device for simple impedimetric monitoring of IL-10 based on graphene foam (GF) flexible electrodes. Graphene's structure was maintained by employing π-π non-covalent functionalization with pyrene carboxylic acid (PCA). Impedimetric measurements could be performed in low ionic strength phosphate-buffered saline (LI-PBS). The PCA-antibody modification showed to endure the incubation, measurement, and washing processes performed in the microfluidic device. Electrode modification and measurements were characterized by, electrochemical impedance spectroscopy (EIS), contact angle, and scanning electron microscopy. From the contact angle results, we found that the wettability of the graphene surface increased gradually after each modification step. Detection measurements performed in the 3D-printed microfluidic device showed a linear response between 10 fg/mL to 100 fg/mL with a limit of detection (LOD) of 7.89 fg/mL in artificial saliva. With these features, the device was used to quantify IL-10 samples by the standard addition method for 10 fg and 50 fg with recoveries between 82% and 99%. Specificity was evaluated towards interleukin 6, TNF-⍺ and bovine serum albumin.

Polymer indicator displacement assay: electrochemical glucose monitoring based on boronic acid receptors and graphene foam competitively binding with poly-nordihydroguaiaretic acid.

The concept of a reversible polymer displacement sensor mechanism for electrochemical glucose monitoring is demonstrated. A pyrene-derivatised boronic acid chemo-receptor for glucose is adsorbed onto a graphene foam electrode. Spontaneous oxidative polymerisation of nordihydroguaiaretic acid (NHG) onto the graphene foam electrode leads to a redox active film (poly-NHG) covalently attached to the boronic acid receptors. Oxidation of poly-NHG frees the boronic acid receptors to interact with glucose from the solution phase, which is detected due to competitive binding when reduced poly-NHG re-binds to the boronic acid functional groups. The sensor shows the anticipated boronic acid selectivity of fructose > glucose. The ratio of charges under the voltammetric peaks for poly-NHG unbound and bound is employed for glucose sensing with an approximately linear analytical range from 1 to 50 mM glucose in aqueous pH 7 buffer. The new methodology is shown to give apparent saccharide - boronic acid binding constants and to work in human serum. Therefore, in the future it could be developed further for glucose monitoring.

Disulfide-modified antigen for detection of celiac disease-associated anti-tissue transglutaminase autoantibodies.

A simple and rapid immunosensor for the determination of the celiac disease-related antibody, anti-tissue transglutaminase, was investigated. The antigenic protein tissue transglutaminase was chemically modified, introducing disulfide groups through different moieties of the molecule (amine, carboxylic, and hydroxyl groups), self-assembled on gold surfaces, and used for the detection of IgA and IgG autoantibodies. The modified proteins were evaluated using enzyme-linked immunosorbent assay and surface plasmon resonance, which showed that only introduction of the disulfide groups through amine moieties in the tissue transglutaminase preserved its antigenic properties. The disulfide-modified antigen was co-immobilized via chemisorption with a poly(ethylene glycol) alkanethiol on gold electrodes. The modified electrodes were then exposed to IgA anti-tissue transglutaminase antibodies and subsequently to horseradish peroxidase-labeled anti-idiotypic antibodies, achieving a detection limit of 260 ng ml-1. Immunosensor performance in the presence of complex matrixes, including clinically relevant serum reference solutions and real patient samples, was evaluated. The introduction of disulfides in the antigenic protein enabled a simple and convenient one-step surface immobilization procedure involving only spontaneous gold-thiol covalent binding. Complete amperometric assay time was 30 min.

Antibodies to wheat high-molecular-weight glutenin subunits in patients with celiac disease.

BACKGROUND: Wheat gluten comprises gliadins and glutenins. The high-molecular-weight (HMW) glutenin subunits (GS)-1Dy10 are toxic for patients with celiac disease (CD). This study aimed to assess whether CD patients mount a serological response to HMW-GS-1Dy10. METHODS: Recombinant HMW-GS-1Dy10 was deamidated using human recombinant tissue transglutaminase. MALDI-TOF was performed to compare the level of deamidation of glutamine residues between material before and after treatment. Enzyme-linked immunosorbent assays were developed. Sera from patients with untreated CD and gastrointestinal disease controls were tested and receiver operator characteristics were used to calculate cutoffs. RESULTS: MALDI-TOF revealed a number of fragments matching known HMW-GS-1Dy10 sequences within both the deamidated and non-deamidated material. Evidence of deamidation of glutamine residues was found only within the human transglutaminase-treated material. Patients with untreated CD had significantly increased levels of serum antibodies to HMW-GS-1Dy10 compared to controls. Undeamidated HMW-GS-1Dy10 IgA antibodies had sensitivities and specificities of 72.5 and 78.26%, respectively. Deamidated HMW-GS-1Dy10 IgA antibodies had sensitivities and specificities of 76.8 and 65.2%. Undeamidated HMW-GS-1Dy10 IgG antibodies had sensitivities and specificities of 75.3 and 68.1%. Deamidated HMW-GS-1Dy10 IgG antibodies had sensitivities and specificities of 36.2 and 92.8%. CONCLUSION: Patients with untreated CD have raised antibody levels to HMW-GS-1Dy10, indicating the participation of these proteins in the adaptive immune response to gluten. Discrimination between CD patients and controls is not enhanced by deamidation of HMW-GS-1Dy10. Thus antibodies to these proteins are not useful markers for CD detection.

Amperometric immunosensor for the determination of IgA deficiency in human serum samples.

An electrochemical immunosensor for the detection of human IgA deficiency in real human blood serum has been developed. The performance of the immunosensor presents a large but sensitive dynamic range that allows the determination of non-deficient IgA levels (>70 µg/mL) as well as of severe IgA deficiencies (0.5-5.0 µg/mL). The assay architecture involves the immobilisation of a coating antibody on an electrode surface using carboxylic-ended bipodal alkane-thiol self-assembled monolayers (SAMs). The long chain bipodal SAM presents intercalated poly(ethylenglycol) groups that confer the immunosensor the ability to retain its optimum performance in very complex matrices and serum with negligible non-specific adsorption phenomena. Amperometric optimisation of the assay resulted in limits of detection of 142 ng/mL in just 30 min total assay time. Real patients' serum samples were analysed using the developed electrochemical immunosensor demonstrating an excellent correlation in terms of sensitivity and reproducibility compared with standard enzyme linked immunosorbent assays (ELISA).

Electrochemical detection of celiac disease-related anti-tissue transglutaminase antibodies using thiol based surface chemistry.

Celiac disease is an autoimmune disorder that affects the gastrointestinal tract upon ingestion of gluten, which triggers the production of antibodies against gliadin and tissue transglutaminase, activating an inflammatory response and inducing tissue damage in the small intestine resulting in malabsorption. The measurement of these antibodies in an individual's blood can be used to screen for celiac disease and the criteria for definitive diagnosis is currently being revised to be based on serological analysis rather than biopsy. In the work reported here, an electrochemical immunosensor for the detection of human anti-tissue transglutaminase antibodies was developed, consisting of gold-based self-assembled monolayers of a carboxylic group terminated bipodal alkanethiol that is covalently linked to tissue transglutaminase, the antigen for the immunorecognition of circulating autoantibodies. The presence of the autoantibodies was recorded using horseradish peroxidase labeled anti-human antibodies, which provided an enzyme based electrochemical signal. Optimization and characterization of the surface of the sensor was carried out by electrochemical impedance spectroscopy and surface plasmon resonance. The immunosensor gave a stable quantitative response to different antibody concentrations after 30 min with a limit of detection of 390 ng/mL and an RSD of 9%, n=3. The developed immunosensor was tested with calibrator solutions as well as with real patients' samples, and the results compared to those obtained from Eurospital's Eu-tTG IgA and IgG ELISA kits, showing an excellent degree of correlation.

Screen-printed microsystems for the ultrasensitive electrochemical detection of alkaline phosphatase.

Screen printing technique has been used to manufacture a microsystem where the graphite-based electrodes hold both a functional and an architectural task. The thick film manufacturing technique has proved valid to develop a very low volume (ca. 20 microL) device where different electrochemical operations can be very efficiently performed. Biomolecule immobilisation within the microsystem for biosensors applications has been explored by inducing and optimizing the in situ generation of a potential pulse polypyrrole electropolymerised film entrapping either glucose oxidase or glucose dehydrogenase. This biomodified microsystem was applied to the ultrasensitive electrochemical detection of alkaline phosphatase yielding limits of detection below 10(-12) M for glucose oxidase and of 10(-15) M for glucose dehydrogenase modified systems, within 15 min of incubation time. The results obtained showed the advantages of using low volume microsystems in combination with an optimised polypyrrole-enzyme film, which displayed a good immobilisation efficiency in conjunction with a good diffusion of species through. Ultrasensitive detection of AP in combination with a stable and reproducible surface modification for entrapping of biomolecules opens the window for new electrochemical detection platform with great potential for integrated biosensor applications.

Controlled electrophoretic deposition of multifunctional nanomodules for bioelectrochemical applications.

The design of an electrochemical glucose sensing device formed by the electrodeposition of multifunctional Au nanoparticles is reported here as a novel concept for an enhanced generic sensing platform. Initially gold nanoparticles (Au) were alternatively coated with a layer of positively charged redox polymer (ORP) and a negatively charged glucose oxidase (GOX) layer alternatively using layer-by-layer methodology to form multifunctional Au/ORP/GOX/ORP particles. The modification and stability of the Au nanoparticles was monitored by using UV-vis spectroscopy and zeta-potential measurements. The modified Au nanoparticles were electrophoretically deposited onto an electrode to produce an electrochemical glucose sensing device. A considerable influence of electrophoretic deposition time and potential was found on the sensing platform response. Preliminary responses to glucose addition showed an enhanced performance by applying an electrophoretic deposition potential of +1.2V vs. Ag/AgCl for 30 min. The observed response in the case of microelectrode geometry was in the range of mAcm(2). This work also shows that the presence of a second outer ORP layer on the functionalised Au nanoparticles improved the response.

Towards a target label-free suboptimum oligonucleotide displacement-based detection system.

A novel method for the future development of label-free DNA sensors is proposed here. The approach is based on the displacement of a labelled suboptimum mutated oligonucleotide hybridised with the immobilised biotin-capture probe. The target fully complementary to the biotin-capture probe can displace the labelled oligonucleotide causing a subsequent decrease of the signal that verifies the presence of the target. The decrease of signal was demonstrated to be proportional to the target concentration. A study of the hybridisation of mutated and complementary labelled oligonucleotides with an immobilised biotin-capture probe was carried out. Different kinetic and thermodynamic behaviour was observed for heterogeneous hybridisation of biotin-capture probe with complementary or suboptimum oligonucleotides. The displacement method evaluated colourimetrically achieved the objective of decreasing the response time from 1 h for direct hybridisation of 19-mer oligonucleotides in the direct enzyme-linked oligonucleotide assay (ELONA) to 5 min in the case of displacement detection in the micromolar concentration range.

Electrochemical characterisation and anodic stripping voltammetry at mesoporous platinum rotating disc electrodes.

Using the technique of liquid crystal templating a rotating disc electrode (RDE) was modified with a high surface area mesoporous platinum film. The surface area of the electrode was characterised by acid voltammetry, and found to be very high (ca. 86 cm(2)). Acid characterisation of the electrode produced distorted voltammograms was interpreted as being due to the extremely large surface area which produced a combination of effects such as localised pH change within the pore environment and also ohmic drop effects. Acid voltammetry in the presence of two different types of surfactant, namely Tween 20 and Triton X-100, suggested antifouling properties associated with the mesoporous deposit. Further analysis of the modified electrode using a redox couple in solution showed typical RDE behaviour although extra capacitive currents were observed due to the large surface area of the electrode. The phenomenon of underpotential deposition was exploited for the purpose of anodic stripping voltammetry and results were compared with data collected for microelectrodes. Underpotential deposition of metal ions at the mesoporous RDE was found to be similar to that at conventional platinum electrodes and mesoporous microelectrodes although the rate of surface coverage was found to be slower at a mesoporous RDE. It was found that a mesoporous RDE forms a suitable system for quantification of silver ions in solution.

Aptamers: molecular tools for analytical applications.

Aptamers are artificial nucleic acid ligands, specifically generated against certain targets, such as amino acids, drugs, proteins or other molecules. In nature they exist as a nucleic acid based genetic regulatory element called a riboswitch. For generation of artificial ligands, they are isolated from combinatorial libraries of synthetic nucleic acid by exponential enrichment, via an in vitro iterative process of adsorption, recovery and reamplification known as systematic evolution of ligands by exponential enrichment (SELEX). Thanks to their unique characteristics and chemical structure, aptamers offer themselves as ideal candidates for use in analytical devices and techniques. Recent progress in the aptamer selection and incorporation of aptamers into molecular beacon structures will ensure the application of aptamers for functional and quantitative proteomics and high-throughput screening for drug discovery, as well as in various analytical applications. The properties of aptamers as well as recent developments in improved, time-efficient methods for their selection and stabilization are outlined. The use of these powerful molecular tools for analysis and the advantages they offer over existing affinity biocomponents are discussed. Finally the evolving use of aptamers in specific analytical applications such as chromatography, ELISA-type assays, biosensors and affinity PCR as well as current avenues of research and future perspectives conclude this review.