Adsorption behavior of azole fungicides on polystyrene and polyethylene microplastics.

Agricultural plastic films and triazole fungicides are widely used in agricultural production process. Exposure to natural environment, agricultural plastic films will degrade into micron plastic particles, which will adsorb pesticide molecules and may affect their toxicity, biological activity and persistence. The long-term coexistence of microplastics (MPs) and triazole fungicides will bring potential harms to the agricultural ecological environment. Therefore, two kinds of triazole fungicides flusilazole (FLU) and epoxiconazole (EPO) were selected as cases and the adsorption behaviors of them on polystyrene and polyethylene were investigated. A series of factors which could affect the adsorption behavior were evaluated. Specifically, the particle size of MPs could affect its adsorption capacity, and the smaller the particle size, the stronger the adsorption capacity. Moreover, with the increase of pH value from 6.0 to 9.0, the adsorption capacity of MPs to target compounds gradually increased. The effect of ionic strength was evaluated by NaCl, and 0.05% of NaCl was beneficial to the adsorption process, while the continuous increase of NaCl concentration inhibited the adsorption. Oxalic acid and humic acid decreased the adsorption capacity of flusilazole on PE by 15.99-32.00% and PS by 35.02-48.67%, respectively. In addition, compared with the single pesticide system, the adsorption capacity of MPs for flusilazole and epoxiconazole in the binary pesticides system decreased by 36.13-37.93% and 44.36-51.35%, respectively, indicating that competitive adsorption occurred between the two pesticides. Meanwhile, the adsorption process was evaluated by adsorption kinetics and adsorption isotherms and were consistent with pseudo-second-order kinetic model and Freundlich isotherm model, respectively. Finally, several characterization analyses were conducted to investigated the adsorption mechanism, and hydrogen, halogen bonding and hydrophobic interaction proved to play an important role. The study on the adsorption behavior and mechanism of pesticide on MPs was the basis of assessing the risk of joint exposure.

Construction of a magnetic solid-phase extraction method for the analysis of azole pesticides residue in medicinal plants.

In this work, a sensitive and cost-effective method for the quantitative analysis of azole pesticides residues in six medicinal plants was established based on magnetic cyclodextrin crosslinked with tetrafluoroterephthalonitrile (Fe3O4@TFN-CDPs) coupled with high-performance liquid chromatography (HPLC). Through characterization analysis, the outer shell of Fe3O4@TFN-CDPs has observed coating with a network of the polymer and forming a core-shell structure. Under the optimum conditions, the limits of detection (LODs) and limits of qualification (LOQs) of target pesticides were ranged from 0.011 to 0.106 µg Kg-1 and from 0.036 to 0.354 µg Kg-1, respectively. Finally, the achieved recoveries of pesticides in six medicinal samples fluctuated from 60.1% to 102.3%. Altogether, this method based on Fe3O4@TFN-CDPs composites provided a new idea for the analysis of trace pesticides in complicated matrices.

Magnetic metal-organic framework MIL-100 (Fe)/polyethyleneimine composite as an adsorbent for the magnetic solid-phase extraction of fungicides and their determination using HPLC-UV.

Fe3O4@MIL-100 (Fe)/PEI are used for the first time as an adsorbent material for the extraction of pesticide residues (epoxiconazole, flusilazole, tebuconazole, and triadimefon) from food matrices. The adsorbent proposed (Fe3O4@MIL-100(Fe)/PEI) was characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), thermogravimetric (TG) analysis, and vibrating sample magnetometer (VSM) techniques to evaluate the properties of the sorbent. Then, the Fe3O4@MIL-100 (Fe)/PEI was employed for the quantification of the four triazole fungicides in fruits and vegetables (apple, orange, tomato, cabbage, and cucumber) using HPLC-UV for separation and detection. During the extraction process, the main parameters such as amount of adsorbent, extraction time, pH value, ionic strength, eluting solvent, and eluting volume were optimized. Under the optimum conditions, good linearity of this method was observed for all analytes, with correlation coefficients (R2) ≥ 0.9908. The limits of detection (LODs) ranged from 0.021-3.04 µg kg-1. The extraction recoveries of the four triazole fungicides varied from 73.9 to 109.4% with relative standard deviations (RSD) in the range 0.5 to 6.2%. Compared with other MOFs, the modification of Fe3O4@MIL-100 (Fe) with PEI shows high efficient adsorption due to the combined benefits of MIL-100 (Fe) and PEI. The material is easily synthesized, has good stability, and is of low cost.  Graphical abstract.

The different toxic effects of metalaxyl and metalaxyl-M on Tubifex tubifex.

Metalaxyl and Metalaxyl-M are the fungicides that widely used in many countries. In this study, the environmental behaviors between metalaxyl and metalaxyl-M in Tubifex tubifex (T. tubifex) were quantitative analyzed by using a high performance liquid chromatography with photo-diode-array-detector (HPLC-DAD). Results demonstrated that there was no significant difference (p > 0.05) in the concentration of metalaxyl and metalaxyl-M in T. tubifex during the exposure process. However, the dissipation behaviors of metalaxyl and metalaxyl-M in T. tubifex were different (p < 0.05) during the non-exposure culture process. Meanwhile, the toxic effects were also evaluated by comparing the different influences of these two compounds on related physiological indicators, and functional enzyme activities. The survival rates of T. tubifex were 63.33 ± 15.28% (20 mg L-1), 63.33 ± 5.77% (200 mg L-1) treated with metalaxyl and were 50.00 ± 10.00% (20 mg L-1), 46.67 ± 11.55 (200 mg L-1) treated with metalaxyl-M at the non-exposure culture process. The autotomy rates were increased significantly compared with the initial in all treatments. Besides, the activities of CAT, SOD, and GST in T. tubifex were also inhibited by metalaxyl and metalaxyl-M treatments. Finally, the high-throughput transcriptome sequencing technology was applied to investigate the metabolic pathways of target analytes in T. tubifex, and results proved that the metabolic pathways associated with human diseases (such as viral myocarditis) were up-regulated expression for metalaxyl and metalaxyl-M treatments, and metalaxyl-M up-regulated more significantly. All the results demonstrated that metalaxyl-M had a higher toxicity than metalaxyl on T. tubifex.

Magnetic Polydopamine Modified with Choline-Based Deep Eutectic Solvent for the Magnetic Solid-Phase Extraction of Sulfonylurea Herbicides in Water Samples.

A novel magnetic solid-phase extraction technique coupled to ultraperformance liquid chromatography has been developed for separation and preconcentration of four sulfonylurea herbicides (sulfosulfuron, bensulfuron-methyl, pyrazosulfuron-ethyl and halosulfuro-methyl) in aqueous samples. The key point of this method was the application of a novel magnetic nanomaterial that composed of a low eutectic solvent as a shell coated on the magnetic core modified by polydopamine. The extensive active sites outside the low eutectic solvent can effectively adsorb the target herbicide in the extraction process. The obtained magnetic adsorbent was characterized with fourier transform infrared spectrometry, scanning electron microscopy and vibrating sample magnetometer. The influence parameters relevant to this method were optimized. Under the optimum conditions, good linearities could be obtained within the range of 1.0-200 µg L-1 for all analytes, with correlation coefficients ≥0.9908. The limit of detections of the method was between 0.0074 and 0.0100 µg L-1 and the relative standard deviations were 1.1-3.6%. The enrichment factor is 66.6. In the final experiment, the proposed method was successfully applied to the analysis of sulfonylurea herbicides residue in environment and drinking-water samples, and the obtained recoveries were between 70.6% and 109.4%.

Magnetic solid-phase extraction based on nano-zeolite imidazolate framework-8-functionalized magnetic graphene oxide for the quantification of residual fungicides in water, honey and fruit juices.

In this work, zeolite imidazolate framework-8 (ZIF-8) functionalized magnetic graphene oxide (Fe3O4@APTES-GO/ZIF-8) was successfully synthesized and used as a novel adsorbent in magnetic solid-phase extraction (MSPE) for the determination of four triazole fungicides in water, honey and fruit juices. The main parameters such as extraction time, amount of adsorbent, the pH value of the sample, ionic strength, and desorption solvent which could affect the experiment results were optimization. Under the optimum condition, the obtained linearity of this method ranged from 1 to 1000 µg L-1 for all analytes, with correlation coefficients (R2) ≥ 0.9914. Limit of detections (LODs) and limit of qualifications (LOQs) of four triazole fungicides were ranged from 0.014 to 0.109 µg L-1 and from 0.047 to 0.365 µg L-1, respectively. Based on comparison with outcomes from other studies, Fe3O4@APTES-GO/ZIF-8-MSPE could provide high performance and achieve satisfied results for the analysis of trace triazole fungicides in complicated matrices.

Application of polydopamine functionalized magnetic graphene in triazole fungicides residue analysis.

In this work, a new analytical method based on polydopamine functionalized magnetic graphene (PDA@MG) adsorbent material has been developed to determine three triazole fungicides in water samples. As previous step, a novel polydopamine functionalized PDA@MG adsorbent material has been successfully prepared, which was characterized by fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscope (TEM), and vibrating sample magnetometer (VSM). Based on this novel material, a new magnetic solid phase extraction (MSPE) method coupled with high performance liquid chromatography (HPLC) has been established for the determination of triazole fungicides in water samples. The main factors which could affect the experimental results were optimized. Under the optimal conditions, good linarites has been achieved in the range of 0.2-50 µg L-1, with the correlation coefficients (R2) were between 0.9962 and 0.9996. The limits of detections (LODs) were 0.0048-0.0084 µg L-1, and the relative standard deviations (RSDs) were between 1.7% and 4.8%. In addition, enrichment factors (EFs) were 572-916 times, which showed triazole fungicides residues could be accurately extracted and analyzed in this way. In the final experiment, the established method was applied to the detection of target analyzes in water samples. Satisfied results could be obtained for tebuconazole, propiconazole, and flusilazole. The recoveries of five water samples were between 69.4% and 106.4%, and the RSD were between 1.0% and 6.5%. The development method is more easy, effective, green and environmental-friendly, and has potential for application.