RESUMEN
Vision Zero postulates that no one should be killed or seriously injured in road traffic; therefore, it is necessary to define evidence-based speed limits to mitigate impact severity. The overall aims to guide the definition of safe speeds limits by establishing relations between impact speed and the risk of at-least-moderate (MAIS2+) and at-least-severe (MAIS3+) injuries for car occupants in frontal and side crashes in Sweden. As Swedish in-depth data are unavailable, the first objective was to assess the applicability of German In-depth Accident Study (GIDAS) data to Sweden. The second was to create unconditional injury risk curves (risk of injury given involvement in any crash), rather than risk curves conditional on the GIDAS sampling criterion of suspected-injury crashes. Thirdly, we compared the unconditional and conditional risk curves to quantify the practical implications of this methodological choice. Finally, we provide an example to demonstrate how injury risk curves facilitate the definition of safe, evidence-based speed limits in Sweden. Characteristics important for the injury outcome were similar between GIDAS and Swedish data; therefore, the injury risk curves using German GIDAS data are applicable to Sweden. The regression models yielded the following results for unconditional injury risk curves: 10 % MAIS2+ at 25 km/h impact speed for frontal head-on crashes, 20 km/h for frontal car-to-object crashes, 55 km/h in far-side crashes, and 45 km/h in near-side crashes. A 10 % MAIS3+ risk was reached between 70 and 75 km/h for all crash types. Conditional injury risk curves gave substantially different results; the 10 % MAIS3+ risk in near-side crashes was 140 km/h, twice the unconditional value. For example, if a 10 % MAIS3+ risk was acceptable, treating remaining uncertainty conservatively, assuming compliance with speed limits and that Automated Emergency Braking takes 20 km/h of the travel speed before impact in longitudinal traffic, the safe speed limit for car occupants on most Swedish roads would be 80 km/h and 60 km/h in intersections.
Asunto(s)
Accidentes de Tránsito , Heridas y Lesiones , Accidentes de Tránsito/estadística & datos numéricos , Accidentes de Tránsito/prevención & control , Humanos , Suecia/epidemiología , Alemania , Heridas y Lesiones/epidemiología , Heridas y Lesiones/prevención & control , Masculino , Adulto , Medición de Riesgo/métodos , Femenino , Persona de Mediana Edad , Aceleración , Adolescente , Seguridad/estadística & datos numéricos , Adulto Joven , AncianoRESUMEN
OBJECTIVE: Most car occupant fatalities occur in frontal crashes and the thorax is the most frequently injured body region. The objectives of the study were, firstly, to quantify the relation between risk factors (such as speed and occupant age) and rib and sternum fracture injury probability in frontal car crashes, and, secondly, to evaluate whether rib fracture occurrence can predict sternum fractures. METHODS: Weighted German data from 1999-2021 were used to create the injury risk curves to predict both, at least moderate and at least serious, rib and sternum fracture risks. A contingency table for rib and sternum fractures allowed the calculation of sensitivity, specificity, and precision, as well as testing for the association. RESULTS: Elderly occupants (≥65 years old) had increased rib and sternum fracture risk compared to mid aged occupants (18-64 years old). Besides occupant age, delta-V was always and sex sometimes a significant predictor for skeletal thoracic injury. Sternum fractures were more common than rib fractures and more likely to occur at any given delta-V. Sternum fractures occurred often in isolation. Female occupants were at higher risk than males to sustain at least moderate rib and sternum fractures together and sternum fractures in isolation. Rib and sternum fractures were associated, but low sensitivity and precision show that rib fractures do not predict sternum fractures well. CONCLUSIONS: Elderly and female occupants were at the highest risk and should be targeted by thoracic injury criteria and thresholds for frontal crash occupant protection. Rib and sternum fractures were not associated. Therefore, sternum fractures need to be predicted and evaluated separately from rib fractures.
Asunto(s)
Fracturas de las Costillas , Traumatismos Torácicos , Anciano , Masculino , Humanos , Femenino , Persona de Mediana Edad , Adolescente , Adulto Joven , Adulto , Fracturas de las Costillas/epidemiología , Fracturas de las Costillas/etiología , Accidentes de Tránsito , Automóviles , Traumatismos Torácicos/epidemiología , Traumatismos Torácicos/etiología , Traumatismos Torácicos/prevención & control , Esternón , CostillasRESUMEN
OBJECTIVE: This study investigated the effects of different seatbelt geometries and load-limiting levels on the kinematics and injury risks of a reclined occupant during a whole-sequence frontal crash scenario, using simulations with the Active SAFER Human Body Model (Active SHBM). METHODS: The Active SHBM was positioned in a reclined position (50°) on a semi-rigid seat model. A whole-sequence frontal crash scenario, an 11 m/s2 Automated Emergency Braking (AEB) phase followed by a frontal crash at 50 km/h, was simulated. The seatbelt geometry was varied using either a B-pillar-integrated (BPI) or Belt-in-seat (BIS) design. The shoulder belt load-limiting level of the BPI seatbelt was also varied to achieve either similar shoulder belt forces (BPI_Lower_LL) or comparable upper body displacements (BPI_Higher_LL) to the BIS seatbelt. Kinematics of different body regions and seatbelt forces were compared. The risks of sustaining a mild traumatic brain injury (mTBI), two or more fractured ribs (NFR2+), and lumbar spine vertebral fractures were also compared. RESULTS: During the pre-crash phase, head, first thoracic vertebra, and first lumbar vertebra displacements were greater with the BPI seatbelt than with the BIS, mainly due to the lack of initial contact between the torso and the seatbelt. Pelvis pre-crash displacements, however, remained consistent across seatbelt types. In the in-crash phase, variations in shoulder belt forces were directly influenced by the different load-limiting levels of the shoulder belt. The mTBI (around 20%) and NFR2+ (around 70-100%) risks were amplified with BPI seatbelts, especially at higher load-limiting force. However, the BPI design demonstrated reduced lumbar spine fracture risks (from 30% to 1%). CONCLUSIONS: The BIS seatbelt appears promising, as seen with the reduced mTBI and NFR2+ risks, for ensuring the protection of reclined occupants in frontal crashes. However, additional solutions, such as lap belt load limiting, should be considered to reduce lumbar spine loading.
Asunto(s)
Conmoción Encefálica , Fracturas de la Columna Vertebral , Humanos , Accidentes de Tránsito , Cuerpo Humano , Cinturones de Seguridad , Vértebras Lumbares/lesiones , Fenómenos BiomecánicosRESUMEN
OBJECTIVE: The study determined the seatbelt pre-pretensioner force needed and the time required to reposition average male front-seat passengers from forward-leaning to upright using finite element simulations of the Active SAFER Human Body Model (Active SHBM). METHODS: The Active SHBM was positioned in an initial forward-leaning position (29° forward from upright) on a deformable vehicle seat. A pre-pretensioner was modeled as a pre-loaded spring and its ability to reposition the forward-leaning Active SHBM to an upright position was simulated for twenty-four different pre-crash conditions. Four parameters were varied: (1) Automated Emergency Braking (AEB) active with 11 m/s2 or no AEB, (2) type of seatbelt system: Belt-In-Seat or B-pillar, (3) pre-pretensioner activation time (200 ms before, 100 ms before, or at the same time as AEB ramp-up), and (4) pre-pretensioner force (200 N, 300 N, 400 N, 600 N). The first thoracic vertebra fore-aft (T1 X) trajectories were compared against a reference upright position to determine the force and time needed to reposition and the effectiveness of repositioning in the different conditions. RESULTS: The lowest force enabling repositioning in all simulations was 400 N (no AEB, Belt-In-Seat). It took about 350 ms. In the presence of AEB, activating the pre-pretensioner 200 ms before AEB and using 600 N pre-pretensioner force was needed for repositioning (taking 200 ms with Belt-In-Seat and 260 ms with B-pillar installations). Repositioning was faster and thus more effective with the Belt-In-Seat seatbelt in all simulations. CONCLUSIONS: All four parameters (presence of AEB, type of seatbelt system, pre-pretensioner activation time and force) affected the repositioning ability and time required. Far from all combinations repositioned a forward-leaning average male occupant model, but those found to be effective and fast appear as a feasible option for vehicle safety systems to reposition out-of-position occupants during pre-crash events.
Asunto(s)
Accidentes de Tránsito , Cinturones de Seguridad , Masculino , Humanos , Fenómenos BiomecánicosRESUMEN
OBJECTIVE: Two-wheeler riders frequently sustain injuries to the head and face in real-world crashes, including traumatic brain injury, basilar skull fracture, and facial fracture. Different types of helmets exist today, which are recognized as preventing head injuries in general; however, their efficacy and limitations in facial impact protection are underexplored. Biofidelic surrogate test devices and assessment criteria are lacking in current helmet standards. This study addresses these gaps by applying a new, more biofidelic test method to evaluate conventional full-face helmets and a novel airbag-equipped helmet design. Ultimately, this study aims to contribute to better helmet design and testing standards. METHODS: Facial impact tests at two locations, mid-face and lower face, were conducted with a complete THOR dummy. Forces applied to the face and at the junction of the head and neck were measured. Brain strain was predicted by a finite element head model taking both linear and rotational head kinematics as input. Four helmet types were evaluated: full-face motorcycle and bike helmets, a novel design called a face airbag (an inflatable structure integrated into an open-face motorcycle helmet), and an open-face motorcycle helmet. The unpaired, two-sided student's t-test was performed between the open-face helmet and the others, which featured face-protective designs. RESULTS: A substantial reduction in brain strain and facial forces was found with the full-face motorcycle helmet and face airbag. Upper neck tensile forces increased slightly with both full-face motorcycle (14.4%, p >.05) and bike helmets (21.7%, p =.039). The full-face bike helmet reduced the brain strain and facial forces for lower-face impacts, but not for mid-face impacts. The motorcycle helmet reduced mid-face impact forces while slightly increasing forces in the lower face. SIGNIFICANCE OF RESULTS: The chin guards of full-face helmets and the face airbag protect by reducing facial load and brain strain for lower face impact; however, the full-face helmets' influence on neck tension and increased risk for basilar skull fracture need further investigation. The motorcycle helmet's visor re-directed mid-face impact forces to the forehead and lower face via the helmet's upper rim and chin guard: a thus-far undescribed protective mechanism. Given the significance of the visor for facial protection, an impact test procedure should be included in helmet standards, and the use of helmet visors promoted. A simplified, yet biofidelic, facial impact test method should be included in future helmet standards to ensure a minimum level of protection performance.
Asunto(s)
Airbags , Traumatismos Craneocerebrales , Fractura Craneal Basilar , Humanos , Dispositivos de Protección de la Cabeza , Accidentes de Tránsito , Traumatismos Craneocerebrales/prevención & control , MotocicletasRESUMEN
Vision Zero is an approach to road safety that aims to eliminate all traffic-induced fatalities and lifelong injuries. To reach this goal, a multi-faceted safe system approach must be implemented to anticipate and minimize the risk associated with human mistakes. One aspect of a safe system is choosing speed limits that keep occupants within human biomechanical limits in a crash scenario. The objective of this study was to relate impact speed and maximum delta-v to risk of passenger vehicle (passenger cars and light trucks and vans) occupants sustaining a moderate to fatal injury (MAIS2+F) in three crash modes: head-on vehicle-vehicle, frontal vehicle-barrier, and front-to-side vehicle-vehicle crashes. Data was extracted from the Crash Investigation Sampling System, and logistic regression was used to construct the injury prediction models. Impact speed was a statistically significant predictor in head-on crashes, but was not a statistically significant predictor in vehicle-barrier or front-to-side crashes. Maximum delta-v was a statistically significant predictor in all three crash modes. A head-on impact speed of 62 km/h yielded 50% (±27%) risk of moderate to fatal injury for occupants at least 65 years old. A head-on impact speed of 82 km/h yielded 50% (±31%) risk of moderate to fatal injury for occupants younger than 65 years. Compared to the impact speeds, the maximum delta-v values yielding the same level of risk were lower within the head-on crash population. A head-on delta-v of 40 km/h yielded 50% (±21%) risk of moderate to fatal injury for occupants at least 65 years old. A head-on delta-v of 65 km/h yielded 50% (±33%) risk of moderate to fatal injury for occupants younger than 65 years. A maximum delta-v value of approximately 30 km/h yielded 50% (±42%) risk of MAIS2+F injury for passenger car occupants in vehicle-vehicle front-to-side crashes. A maximum delta-v value of approximately 44 km/h yielded 50% (±24%) risk of MAIS2+F injury for light truck and van occupants, respectively, in vehicle-vehicle front-to-side crashes.
Asunto(s)
Accidentes de Tránsito , Heridas y Lesiones , Humanos , Anciano , Suecia/epidemiología , Vehículos a Motor , Automóviles , Seguridad , Heridas y Lesiones/epidemiologíaRESUMEN
INTRODUCTION: Developers of in-vehicle safety systems need to have data allowing them to identify traffic safety issues and to estimate the benefit of the systems in the region where it is to be used, before they are deployed on-road. Developers typically want in-depth crash data. However, such data are often not available. There is a need to identify and validate complementary data sources that can complement in-depth crash data, such as Naturalistic Driving Data (NDD). However, few crashes are found in such data. This paper investigates how rear-end crashes that are artificially generated from two different sources of non-crash NDD (highD and SHRP2) compare to rear-end in-depth crash data (GIDAS). METHOD: Crash characteristics and the performance of two conceptual automated emergency braking (AEB) systems were obtained through virtual simulations - simulating the time-series crash data from each data source. RESULTS: Results show substantial differences in the estimated impact speeds between the artificially generated crashes based on both sources of NDD, and the in-depth crash data; both with and without AEB systems. Scenario types also differed substantially, where the NDD have many fewer scenarios where the following-vehicle is not following the lead vehicle, but instead catches-up at high speed. However, crashes based on NDD near-crashes show similar pre-crash criticality (time-to-collision) to in-depth crash data. CONCLUSIONS: If crashes based on near-crashes are to be used in the design and assessment of preventive safety systems, it has to be done with great care, and crashes created purely from small amounts of everyday driving NDD are not of much use in such assessment. PRACTICAL APPLICATIONS: Researchers and developers of in-vehicle safety systems can use the results from this study: (a) when deciding which data to use for virtual safety assessment of such systems, and (b) to understand the limitations of NDD.
Asunto(s)
Conducción de Automóvil , HumanosRESUMEN
OBJECTIVE: In the US, 27% of car occupant fatalities occur in side-impacts. Near-side impacts cause more serious injuries than far-side impacts. Car occupant safety overall has improved, but rear-seat occupant protection lags behind front-seat protection. The current study had two aims: first, to describe crash characteristics and injury outcomes for near-side rear-seated restrained occupants before and after side-impact regulations (FMVSS-214) were mandated; and secondly, to estimate injury risks in near-side impact depending on seating position, delta-v, and other predictors. METHODS: The National Automotive Sampling System - Crashworthiness Data System (NASS - CDS) database for 1995 to 2015 was analyzed. The descriptive statistics focused on rear-seated restrained adults, comparing old (<1997) and new (≥1997) vehicles exposed to near-side impacts. Weighted logistic regression models including all front and rear-seat occupants were used to predict the occurrence of at least moderate injury in near-side impacts. RESULTS: Rear-seated restrained adults in new vehicles were exposed to higher delta-v and intrusion levels compared to old vehicles. Moreover, injuries to rear-seat occupants in new vehicles were more distributed across body regions, compared to old vehicles (mainly thorax and head). The risk of sustaining injuries increased significantly with delta-v and occupant age, when not using a seatbelt, when seated in a passenger car and when hit in the passenger compartment. The risk increased by trend, but not significantly, when seated in a newer vehicle, when seated in the rear-seat and when the crash opponent was an SUV or van. CONCLUSIONS: Trends and risk factors for at least moderate injuries in near-side impacts were identified to guide future directions for occupant protection in side-impacts and its assessments.
Asunto(s)
Accidentes de Tránsito , Heridas y Lesiones , Adulto , Automóviles , Humanos , Modelos Logísticos , Factores de Riesgo , Cinturones de Seguridad , Heridas y Lesiones/epidemiologíaRESUMEN
Globally there are more than 350,000 PTW fatalities each year. Safety concepts to protect Powered Two-Wheeler (PTW) riders exist and are being developed further, but they need appropriate procedures and test tools (Anthropometric Test Devices (ATDs) for physical testing and Human Body Models (HBMs) for virtual testing) to direct and promote those developments. To aid further development of the tools, we aim to rank the frequency of specific injuries arising from the prevalent impact types, discuss how current ATDs and HBMs are equipped to assess these injuries, and suggest what further development should be prioritized. We analyzed a sample of injured riders from the German In-depth Accident Study (GIDAS) according to the Abbreviated Injury Scale (AIS) 2015 classification, using severity thresholds of at-least-moderate (AIS2+) and at-least-serious (AIS3+). PTW rider injuries were ranked by frequency for all crashes and also for sub-samples of specific impact types (impact with passenger cars, ground, and roadside furniture). The most frequent AIS3+ injuries were: femur fracture (17%), rib cage fracture (13%), lung injury (9%), tibia fracture (7%), and cerebrum injury (7%). In all impacts together and as for impacts with the road surface, injuries to the thorax were most frequent. In impacts with cars and road furniture, thorax injuries were also frequent, but outranked by lower extremity injuries. Considering both AIS2+ and AIS3+ injuries, the priorities for PTW rider safety interventions are: fracture of the rib cage, femur fracture, tibia fracture, radius fracture, cerebrum injury, and cerebral concussion. The ATD currently used most frequently, the Hybrid III, is unlikely to provide adequate rib fracture injury assessments, but HBMs are promising in this area. Rib injury assessment may also reasonably predict other injuries that were correlated or in proximity to rib fractures: clavicle, lung, and upper abdomen organ injury. Lower extremity, upper extremity, and head injuries are likely addressable to some extent with current ATDs while HBMs hold the promise of more detailed and mechanism-specific injury assessments. Both ATDs and HBMs need more validation for use in the PTW environment.
Asunto(s)
Traumatismos Craneocerebrales , Traumatismos Torácicos , Heridas y Lesiones , Escala Resumida de Traumatismos , Accidentes de Tránsito/prevención & control , Automóviles , Humanos , Heridas y Lesiones/epidemiología , Heridas y Lesiones/prevención & controlRESUMEN
Automated Emergency Braking (AEB) is an effective way to prevent crashes from happening or mitigate their severity. Because riders of two-wheelers (TWs) are among the most vulnerable road users, New Car Assessment Programs, like the China New Car Assessment Program (C-NCAP), have recently introduced test scenarios for the assessment of AEB for cars encountering TWs (TW-AEB). The main aim of this study was to determine how well two different C-NCAP test scenario datasets reflect real-world crash scenarios for the purpose of assessing TW-AEB performance. We used virtual counterfactual simulations to determine whether the hypothetical TW-AEB's performance, when applied to the two C-NCAP datasets, was similar to its performance when applied to a set of reconstructed car-to-TW crashes representing real-world crashes. The test datasets were the current C-NCAP scenario set and a proposed C-NCAP scenario set; the real-world crash dataset comprised 113 reconstructed crashes from the Shanghai United Road Traffic Safety Scientific Research Center database (SHUFO). The performances were compared with respect to crash avoidance rate and the characteristics of the remaining crashes. A substantially higher proportion of crashes was avoided in the current C-NCAP scenario set than in the other two (with the sensor field of view (FoV) set to 70° and the activation time to 1.1 s TTC). In fact, with these parameter settings, no crashes remained in the current C-NCAP scenarios, while only 37% and 46% of the crashes in the proposed C-NCAP scenario set and SHUFO crash set were avoided, respectively. Our findings show that TW-AEB systems which are optimized for the current C-NCAP test scenarios are likely to provide benefits in real-world crashes. However, including additional test scenarios which reflect real-world crash situations more accurately would likely lead to a higher correlation between C-NCAP scores and real-world TW-AEB performance. In particular, we recommend the introduction of longitudinal same-direction scenarios with the car or TW turning and perpendicular scenarios with high TW traveling speed, in future C-NCAP releases. Inclusion of these scenarios in C-NCAP might reward improvements of future TW-AEBs toward systems that can save more lives. Furthermore, our study shows that there is likely to be a substantial number of crashes with an impact speed higher than 40 km/h still remaining even after the widespread application of TW-AEB. Therefore, passive safety for TW riders on Chinese roads will be still needed.
Asunto(s)
Automóviles , Heridas y Lesiones , Accidentes de Tránsito , China , Urgencias Médicas , Humanos , Equipos de SeguridadRESUMEN
To evaluate vehicle occupant injury risk, finite element human body models (HBMs) can be used in vehicle crash simulations. HBMs can predict tissue loading levels, and the risk for fracture can be estimated based on a tissue-based risk curve. A probabilistic framework utilizing an age-adjusted rib strain-based risk function was proposed in 2012. However, the risk function was based on tests from only twelve human subjects. Further, the age adjustment was based on previous literature postulating a 5.1% decrease in failure strain for femur bone material per decade of aging. The primary aim of this study was to develop a new strain-based rib fracture risk function using material test data spanning a wide range of ages. A second aim was to update the probabilistic framework with the new risk function and compare the probabilistic risk predictions from HBM simulations to both previous HBM probabilistic risk predictions and to approximate real-world rib fracture outcomes. Tensile test data of human rib cortical bone from 58 individuals spanning 17-99 years of ages was used. Survival analysis with accelerated failure time was used to model the failure strain and age-dependent decrease for the tissue-based risk function. Stochastic HBM simulations with varied impact conditions and restraint system settings were performed and probabilistic rib fracture risks were calculated. In the resulting fracture risk function, sex was not a significant covariate-but a stronger age-dependent decrease than previously assumed for human rib cortical bone was evident, corresponding to a 12% decrease in failure strain per decade of aging. The main effect of this difference is a lowered risk prediction for younger individuals than that predicted in previous risk functions. For the stochastic analysis, the previous risk curve overestimated the approximate real-world rib fracture risk for 30-year-old occupants; the new risk function reduces the overestimation. Moreover, the new function can be used as a direct replacement of the previous one within the 2012 probabilistic framework.
RESUMEN
Emerging cancer drugs introduce new forms of nephrotoxicity that may also present as electrolyte disorders. Here, we report a patient with non-Hodgkin lymphoma who developed severe hypokalaemia with concurrent hypophosphataemia, hypocalcaemia and hypomagnesaemia secondary to venetoclax. Although electrolyte disorders have been reported during treatment with venetoclax, these were ascribed to tumour lysis prophylaxis. Based on the temporal relationship and urinary studies, we show that venetoclax can cause these electrolyte disorders, likely through an effect on the proximal and distal convoluted tubule. In patients treated with venetoclax, we recommend close monitoring of electrolytes and avoiding co-medication that can contribute to electrolyte disorders.
RESUMEN
The motorcyclist safety standard ISO 13232, based on crash data from Europe and the USA from the 1970s, still sets the direction for the development and evaluation of protective measures today. However, it is unclear how relevant the crash configurations in the standard are to present-day motorcycle crashes in Europe, the USA and other parts of the world. We analyzed recent in-depth crash data from Germany, India and China, examining powered two-wheeler (PTW) crash configurations in which at least one police-reported serious injury was present. After assessing the relevance of the ISO's PTW crash configurations to those we found in each country, we suggested new configurations to guide the development of safety systems that would be more effective at reducing PTW-related fatalities and serious injuries. In all three databases, passenger cars were among the top two most frequent collision partners and a car front impacting the side of the PTW was the most common configuration. Notably, although collisions with trucks constituted the most common scenario in India and ground impact (primary collision) was a common scenario in both Germany and India, the ISO did not include either configuration. Further, in three of the seven ISO crash configurations, one of the collision partners is stationary, although stationary collision partners were rare in our data. Our results show that the ISO crash configurations do not represent the most frequent PTW road crashes in Germany, India or China. However, the Chinese database was confined to crashes with a collision partner with four or more wheels. Further, weighting factors for these data were not available, so we could not extrapolate the frequency of the Chinese crash configurations across the entire population. A revised version of the ISO could serve as a basis for a full-scale PTW crash test program. However, the observed differences between countries imply that a single global standard may not be feasible. To optimize the evaluation of a PTW safety system, we recommend the inclusion of configurations which are frequent in the region or country of interest-in addition to common configurations occurring frequently all around the world.
Asunto(s)
Accidentes de Tránsito , Accidentes de Tránsito/prevención & control , China , Europa (Continente) , Alemania , Humanos , India , Motocicletas , Heridas y Lesiones/epidemiología , Heridas y Lesiones/prevención & controlRESUMEN
Many cyclist fatalities occur on roads when crossing a vehicle path. Active safety systems address these interactions. However, the driver behaviour models that these systems use may not be optimal in terms of driver acceptance. Incorporating explicit estimates of driver discomfort might improve acceptance. This study quantified the degree of discomfort experienced by drivers when cyclists crossed their travel path. Participants were instructed to drive through an intersection in a fixed-base simulator or on a test track, following the same experimental protocol. During the experiments, three variables were controlled: 1) the car speed (30, 50 km/h), 2) the bicycle speed (10, 20 km/h), and 3) the bicycle-car encroachment sequence (bicycle clears the intersection first, potential 50 %-overlap crash, and car clears the intersection first). For each trial, a covariate, the car's time-to-arrival at the intersection when the bicycle appears (TTAvis), was calculated. After each trial, the participants were asked to report their experienced discomfort on a 7-point Likert scale ranging from no discomfort (1) to maximum discomfort (7). The effect of the three controlled variables and the effect of TTAvis on drivers' discomfort were estimated using cumulative link mixed models (CLMM). Across both experimental environments, the controlled variables were shown to significantly influence discomfort. TTAvis was shown to have a significant effect on discomfort as well; the closer to zero TTAvis was (i.e., the more critical the situation), the more likely the driver reported great discomfort. The prediction accuracies of the CLMM with all three controlled variables and the CLMM with TTAvis were similar, with an average accuracy between 40 and 50 % for the exact discomfort level and between 80 and 85 % allowing deviations by one step. Our model quantifies driver discomfort. Such model may be included in the decision-making algorithms of active safety systems to improve driver acceptance. In fact, by tuning system activation times depending on the expected level of discomfort that a driver would experience in such situation, a system is not likely to annoy a driver.
Asunto(s)
Accidentes de Tránsito/prevención & control , Automatización , Conducción de Automóvil/psicología , Ciclismo , Modelos Biológicos , Peatones , Administración de la Seguridad/métodos , Adulto , Algoritmos , Señales (Psicología) , Planificación Ambiental , Femenino , Humanos , Masculino , Equipos de Seguridad , Estrés PsicológicoRESUMEN
Forward collision warning (FCW) and autonomous emergency braking (AEB) systems are increasingly available and prevent or mitigate collisions by alerting the driver or autonomously braking the vehicle. Threat-assessment and decision-making algorithms for FCW and AEB aim to find the best compromise for safety by intervening at the "right" time: neither too early, potentially upsetting the driver, nor too late, possibly missing opportunities to avoid the collision. Today, the extent to which activation times for FCW and AEB should depend on factors such as pedestrian speed and lane width is unknown. To guide the design of FCW and AEB intervention time, we employed a fractional factorial design, and determined how seven factors (crossing side, car speed, pedestrian speed, crossing angle, pedestrian size, zebra-crossing presence, and lane width) affect the driver's response process and comfort zone when negotiating an intersection with a pedestrian. Ninety-four volunteers drove through an intersection in a fixed-base driving simulator, which was based on open-source software (OpenDS). Several parameters, including pedestrian time-to-arrival and driver response time, were calculated to describe the driver response process and define driver comfort boundaries. Linear mixed-effect models showed that driver responses depended mainly on pedestrian time-to-arrival and visibility, whereas factors such as pedestrian size, zebra-crossing presence, and lane width did not significantly influence the driver response process. Drivers released the accelerator pedal in 99.8 % of the trials and braked in 89 % of the trials. Forty-six percent of the drivers changed their negotiation strategy (proportion of pedal braking to engine braking) to minimize driving effort over the course of the experiment. In fact, 51 % of the of the inexperienced drivers changed their response strategy whereas only 40 % of the experienced drivers did; nevertheless, all drivers behaved similarly, independent of driving experience. The flexible and customizable driving environment provided by OpenDS may be a viable platform for behavioural experiments in driving simulators. Results from this study suggest that visibility and pedestrian time-to-arrival are the most important variables for defining the earliest acceptable FCW and AEB activations. Fractional factorial design effectively compared the influence of seven factors on driver behaviour within a single experiment; however, this design did not allow in-depth data analysis. In the future, OpenDS might become a standard platform, enabling crowdsourcing and favouring repeatability across studies in traffic safety. Finally, this study advises future design and evaluation procedures (e.g. new car assessment programs) for FCW and AEB by highlighting which factors deserve further investigation and which ones do not.
RESUMEN
This study estimates how many additional cyclist accidents, injuries or fatalities are avoided or mitigated by adding a system which increases braking levels, the Torricelli Vacuum Emergency Brake (VEB), to a state-of-the-art Automated Emergency Braking (AEB) system. To obtain a realistic state-of-the-art AEB system, the AEB parameter settings were defined to fulfil but not exceed the performance necessary to achieve a full score in the European New Car Assessment Program (Euro NCAP). The systems are simulated in a simple but realistic simulation model in MATLAB with varying brake deceleration and sensor field-of-view (FoV). This study utilised data from the German In-Depth Accident Study (GIDAS), released in January 2019, and the related Pre-Crash Matrix (PCM), released in February 2019. Cyclist Injury Risk Curves were created from 2,662 GIDAS accidents involving a passenger car and a cyclist. The sample of cyclist accidents from the GIDAS-PCM database used in the final simulations comprised 1,340 collisions between the front of a passenger car and a cyclist. Both data samples were weighted to be representative of Germany as a whole. Adding the VEB was found to avoid over 20% more accidents than the AEB alone. Although increasing the FoV from 75° to 180° for the AEB system increases its accident avoidance rate to a level comparable to the VEB, the VEB remains about 8-20% more effective in reducing fatalities and injuries, and thus offers greater safety benefits than simply increasing AEB FoV. While the initial accidents in the representative simulation sample are fairly evenly distributed over the vehicle front, the remaining accidents (those that cannot be prevented by AEB or VEB) are more concentrated at the vehicle corners and are further characterized by high cyclist speeds. High cyclist speeds and impact to the vehicle corners potentially increase the relative frequency of head impacts to the stiff A-pillars. We therefore recommend that, for passenger cars, VEB and other advanced AEB systems should be combined with in-crash protection, especially in the A-pillar area, to best protect cyclists from injury.
Asunto(s)
Accidentes de Tránsito/prevención & control , Ciclismo/lesiones , Sistemas Hombre-Máquina , Equipos de Seguridad , Heridas y Lesiones/prevención & control , Accidentes de Tránsito/mortalidad , Automóviles , Desaceleración , Alemania/epidemiología , Humanos , Campos Visuales , Heridas y Lesiones/epidemiologíaRESUMEN
Objective: Left turn across path with traffic from the opposite direction (LTAP/OD) is the second most frequent car-to-car intersection crash type after straight crossing path (SCP) in Germany and the United States. Intersection automated emergency braking (AEB) for passenger cars can address these crashes. This study investigates 2 implementation strategies of intersection AEB addressing LTAP/OD crashes: (1) only the turning car is equipped with an intersection AEB and (2) turning and straight-heading cars are equipped with an intersection AEB. For each strategy, the influence of a safety zone around the vehicles that should not be entered is evaluated in terms of accident avoidance, injury mitigation, and change in velocity (delta-V) of remaining accidents. Results are given as a function of market penetration. Methods: A total of 372 LTAP/OD crashes from the time series precrash matrix (PCM), a subsample of the German In-Depth Accident Study (GIDAS), were resimulated in the PRediction of Accident Evolution by Diversification of Influence factors in COmputer simulation (PRAEDICO) simulation framework. A Kudlich-Slibar rigid-body impact model and an injury risk curve derived from GIDAS were used to predict remaining moderate to fatal (Maximum Abbreviated Injury Scale [MAIS] 2 + F) injuries among car occupants. Results: With a safety zone of 0.2 m, when the turning vehicle only was equipped with an intersection AEB, 59% of the crashes were avoided at a 100% market penetration. With both vehicles equipped the percentage increased to 77%. MAIS 2 + F injured occupants were reduced by 60 and 76%, respectively. Considering both the turning and the straight-heading vehicles, the delta-V decreased strongly with market penetration in remaining left-side impacts but only slightly in remaining frontal and right-side impacts. Eliminating the safety zone substantially decreases effectiveness in all conditions. Conclusions: Implementation strategy and safety zone definition strongly influence the real-life performance of intersection AEB. AEB should be applied not only for the turning vehicle but also for the straight-going vehicle to benefit from the full potential. Situationally appropriate safety zone definitions, in line with human hazard perception, need more attention and are a key to balance true positive and false positive performance. Remaining delta-V does not decrease broadly; hence, there is no evidence that future LTAP/OD crashes will be generally of lower severity. This highlights the need for continuous development of in-crash protection.
Asunto(s)
Accidentes de Tránsito/prevención & control , Desaceleración , Planificación Ambiental/estadística & datos numéricos , Equipos de Seguridad/estadística & datos numéricos , Escala Resumida de Traumatismos , Accidentes de Tránsito/estadística & datos numéricos , Automatización , Simulación por Computador , Urgencias Médicas , Alemania , Humanos , Estados Unidos , Heridas y Lesiones/etiología , Heridas y Lesiones/prevención & controlRESUMEN
Two-wheeled vehicles (motorized and non-motorized, referred to as TWs) are an important part of the transport system in China. They also represent an important challenge for road safety, with many TW user fatalities and injuries every year. Recently, active safety systems for cars, such as Automated Emergency Braking (AEB), promise to reduce road traffic fatalities and injuries. For these systems to work effectively, it is necessary to understand and define the complex traffic scenarios to be addressed. The aim of this study is to contribute to the development of test procedures for AEB specifically, drawing on the China In-Depth Accident Study (CIDAS) data from July 2011 to February 2016 to describe typical scenarios for crashes between cars and TWs by means of cluster analysis. In total, 672 car-to-TW crashes were extracted. The data was clustered according to five main crash characteristics: time of crash, view obstruction, pre-crash driving behavior of the car driver and the TW driver, and relative moving direction. The analysis resulted in six car-to-TW crash scenarios typical of China. In three scenarios the car and the TW travel perpendicularly to each other before the crash, in two they travel in the same direction, and in one they travel in opposite directions. Further, each scenario can be described with three characteristics (the road speed limit, the TW's first contact point on the car, and the car's first contact point on the TW) that can be included in an AEB test suite. Some scenarios were similar to those in the Euro New Car Assessment Program (Euro NCAP). For example, in one, a TW moving straight ahead was hit by a car moving perpendicularly, and in the other the car hit a TW traveling in the same direction. Both occurred in daytime, without a visual obstruction. However, in contrast to the Euro NCAP, typical scenarios in China included night-time scenarios, scenarios where the car or the TW was turning, and those in which the TW was hidden from the car by an obstruction. The results contribute to a proposed novel AEB test suite with realistic scenarios specific to China.
Asunto(s)
Accidentes de Tránsito/estadística & datos numéricos , Automóviles , Ciclismo , Motocicletas , Accidentes de Tránsito/prevención & control , China , Análisis por Conglomerados , HumanosRESUMEN
The Vision Zero approach advocates for a road transport system designed with human injury tolerance and human fallibility as its basis. While biomechanical limits and the relationship between speed and injury outcome has been extensively investigated for car occupants and pedestrians, research analyzing this relationship for motorcyclists remains limited. The aim of this study was to address this issue by developing multivariate injury risk models for motorcyclists that estimate the relationship between speed and injury severity. For that purpose, motorcycle injury crashes from the German In-Depth Accident Study (GIDAS) database for the period 1999-2017 (n = 1037) were extracted. Different models were tested using logistic regression and backwards elimination of non-significant variables. The best fitting model in the current study included relative speed, type of crash opponent, impact location on the motorcycle and impact mechanism of the rider during the crash. A strong and significant relationship between relative speed and injury severity in motorcycle crashes was demonstrated. At 70 km/h, the risk for at least serious injuries in collisions with wide objects, crash barriers and narrow objects was 20%, 51%, and 64%, respectively. Further, it was found that head-on collisions between motorcycles and passenger cars, with both vehicles traveling at 60 km/h (a relative speed at 120 km/h), present 55% risk of at least serious injury to the motorcycle rider. More research is needed to fully understand the boundary conditions needed to design a safe road transport system for motorcyclists. However, this study provides important insights into the relationship between speed and injury severity for riders in various crash situations. The results may be useful in the discussion of appropriate speed limits and in determining the benefits of countermeasures which aim to reduce crash speed.
Asunto(s)
Accidentes de Tránsito/estadística & datos numéricos , Motocicletas/estadística & datos numéricos , Heridas y Lesiones , Bases de Datos Factuales , Humanos , Puntaje de Gravedad del Traumatismo , Modelos Logísticos , Medición de Riesgo , Factores de Riesgo , Heridas y Lesiones/etiología , Heridas y Lesiones/prevención & controlRESUMEN
Inflammation is increasingly recognized as a driver of hypertension. Both genetic and pharmacological inhibition of B and T cells attenuates most forms of experimental hypertension. Accordingly, the immunosuppressive drug mycophenolate mofetil (MMF) reduces blood pressure in the deoxycorticosterone acetate (DOCA-) salt model. However, the mechanisms by which MMF prevent hypertension in the DOCA-salt model remain unclear. Recent studies indicate that immunosuppression can inhibit sodium transporter activity in the kidney, but its effect on vascular tone is not well characterized. Therefore, the aim of the present study was to analyze the vascular and renal tubular effects of MMF in the DOCA-salt model in rats (4 weeks without uninephrectomy). Co-treatment with MMF attenuated the rise in blood pressure from day 11 onward resulting in a significantly lower telemetric mean arterial pressure after 4 weeks of treatment (108 ± 7 vs. 130 ± 9 mmHg, P < 0.001 by two-way analysis of variance). MMF significantly reduced the number of CD3+ cells in kidney cortex and inner medulla, but not in outer medulla. In addition, MMF significantly reduced urinary interferon-γ excretion. Vascular tone was studied ex vivo using wire myographs. An angiotensin II type 2 (AT2) receptor antagonist blocked the effects of angiotensin II (Ang II) only in the vehicle group. Conversely, L-NAME significantly increased the Ang II response only in the MMF group. An endothelin A receptor blocker prevented vasoconstriction by endothelin-1 in the MMF but not in the vehicle group. MMF did not reduce the abundances of the kidney sodium transporters NHE3, NKCC2, NCC, or ENaC. Together, our ex vivo results suggest that DOCA-salt induces AT2 receptor-mediated vasoconstriction. MMF prevents this response and increases nitric oxide availability. These data provide insight in the antihypertensive mechanism of MMF and the role of inflammation in dysregulating vascular tone.