Assessment of the effectiveness of a novel BioFilm-Membrane BioReactor oil-polluted wastewater treatment technology by applying biomarkers in the mussel Mytilus galloprovincialis.

Petrochemical industries and oil refineries are sources of hazardous chemicals into the aquatic environments, and often a leading cause of reduced oxygen availability, thus resulting in adverse effects in biota. This study is an expansion of our previous work on the assessment of the BioFilm-Membrane Bioreactor (BF-MBR) to mitigate the impact of oil-polluted wastewater on marine environments. Specifically, this study evaluated the reduction of selected chemical constituents (hydrocarbons and trace metals) and toxicity related to hypoxia and DNA damage to mussels Mytilus galloprovincialis, before and after treatment of oil-polluted wastewater with the BF-MBR. The application of a multidisciplinary approach provided evidence of the efficiency of BF-MBR to significantly reducing the pollutants load from oily contaminated seawaters. As result, the health status of mussels was preserved by a hypoxic condition due to oily pollutants, as evidenced by the modulation in the gene expression of HIF-1α and PHD and changes in the level of hypotaurine and taurine. Moreover, ameliorative effects in the energy metabolism were also found in mussel gills showing increased levels of glycogen, glucose and ATP, as well as a mitigated genotoxicity was revealed by the Micronucleus and Comet assays. Overall, findings from this study support the use of the BF-MBR as a promising treatment biotechnology to avoid or limiting the compromise of marine environments from oil pollution.

Demolition and construction recycling unified management: the DECORUM platform for improvement of resource efficiency in the construction sector.

The construction and public work sectors are faced with a series of challenges that will need to be addressed in moving towards an effective circular economy model. The aim of this work was to develop a simple but holistic approach to the management of construction projects in order to ensure compliance with technical standards and environmental criteria right from the set-up phase and to foster an increased use of recycled materials and saving of natural resources. To achieve this goal, a multi-user platform was designed and developed to manage and control all stages and procedures of public work and provide support to all those involved throughout the various stages of implementation. The platform included (1) technical standards; (2) environmental law; (3) databases; (4) technical specifications for public tenders; (5) a tool to assess environmental impacts and circularity; (6) a marketplace to facilitate and transparently manage trading of natural, artificial, and recycled aggregates; (7) interactive catalogues with declarations of building products; and (8) interactive maps for the geolocation of treatment plants, producers, and construction sites. The platform, currently undergoing validation by public administrations, will represent a valuable tool for use in enabling public work contractors to reduce environmental impacts, promote an informed and transparent use of recycled products, and to encourage a more sustainable use of natural resources. The platform will facilitate the application of green public procurement (GPP) which, although mandatory in several countries (e.g., in Italy), continues to encounter a series of problems in implementation. The platform will also enhance compliance with technical standards and minimum environmental criteria (MEC), as recently defined for buildings and road construction and maintenance, thus expanding the market for artificial and recycled aggregates with certified products and guaranteed quality.

Evaluation of automotive shredder residues (ASR) landfill behavior through lysimetric and traditional leaching tests.

With regards to European waste catalog, automotive shredder residues (ASR) can be classified both as a hazardous or non-hazardous waste according to its hazardous properties (H1-H14). It is thus important to carry out an adequate chemical-physical characterization to identify the presence and concentration of those substances able to give, to this extremely heterogeneous material, the hazardousness character of. The issue of waste characterization, to identify the proper site for appropriate waste disposal, is based, according to the relevant laws, to the use of leaching tests. The analysis of the potential effects of landfilled waste in laboratory, however, run into several difficulties in reproducing phenomena depending both on the characteristics of small, heterogeneous quantity of waste and on the local boundary conditions. These difficulties are much more significant as the waste is heterogeneous at the small scale of the laboratory. This is one of the main problems often leading to scattered results even when starting from the same waste parcel. Present research aimed to overcome the above-mentioned difficulties deriving from waste heterogeneity and was based on a lysimetric simulation. Experimentation with lysimeter has shown it effectiveness in the comparison between leachate from the lysimeter and an ASR landfill leachate, from which similar distribution of metal mass ratios, close values for both BOD5 and COD, as well as the absence in both the fluids of organochlorinated compounds, emerge.

An empirical model for the evaluation of the dissolution rate from a DNAPL-contaminated area.

This paper investigates dynamic variation in the morphologic distribution of dense non-aqueous phase liquids (DNAPLs), which take into account the coupled mass transfer. Experiments were carried out in a 2D tank representing a reconstructed aquifer model. DNAPL dissolution rates were investigated over a wide range of DNAPL saturations, several source configurations, and different hydraulic conditions. Morphometric indexes are presented that take into consideration further factors affecting the dissolution process. Local information regarding transport parameters related to the characteristics of the medium was obtained through a neural network and an optimization algorithm applied to experimental tracer tests. The history of DNAPL source architecture, in terms of saturation, indentation grade, and orientation, was determined by image analysis. Dissolved concentrations were registered and mass transfer rate coefficients were obtained for a wide range of source-zone configurations. A statistical analysis was performed to develop a constitutive equation that is descriptive of the mass transfer rate as a function of source-zone metric characteristics. A new empirical dissolution model using the proposed morphometric parameters is presented and compared with other models. The mass transfer correlation reported incorporates morphometric parameters and considers the complex and variable architecture of non-miscible contaminants. The proposed correlation can be used for an initial assessment of non-aqueous phase liquid (NAPL) dissolution rates over a wide range of saturation (residual and non-residual) conditions and different aqueous phase velocities within the NAPL source zone.

The modelling of odour dispersion as a support tool for the improvements of high odours impact plants.

Two scenarios in terms of odour impact assessment were studied during the phase of upgrading of an existing waste treatment plant: CALPUFF was used for the simulation of odour dispersion. Olfactometric measures, carried out over different periods and different positions in the plant, were used for model calibration. Results from simulations were reported in terms of statistics of odour concentrations and isopleths maps of the 98th percentile of the hourly peak concentrations, as requested from the European legislation and standards. The excess perception thresholds and emissions were utilized to address the plant upgrade options. The hourly evaluation of odours was performed to determine the most impacting period of the day. An inverse application of the numerical simulation starting from defining the odour threshold at the receptor was made to allow the definition of the required abatement efficiency at the odours source location. Results from the proposed approach confirmed the likelihood to adopt odour dispersion modelling, not only in the authorization phase, but also as a tool for driving technical and managing actions in plant upgrade so to reduce impacts and improve the public acceptance. The upgrade actions in order to achieve the expected efficiency are reported as well.

Feasibility of treating emulsified oily and salty wastewaters through coagulation and bio-regenerated GAC filtration.

In the present study, chemical oxygen demand (COD) removal by coagulation and packed-columns of both fresh and bioregenerated granular activated carbon (GAC) is reported as a feasible treatment for saline and oily wastewaters (slops) generated from marine oil tankers cleaning. The use of Ferric chloride (FeCl3), Aluminium sulphate (Al2(SO4)3) and Polyaluminum chloride (Al2(OH3)Cl3) was evaluated in the pre-treatment by coagulation of a real slop, after a de-oiling phase in a tank skimmer Comparison of coagulation process indicated that Polyaluminum chloride and Aluminium sulphate operate equally well (20-30% of COD removal) when applied at their optimal dose (40 and 90 mg/l respectively) but the latter should be preferred in order to significantly control the sludge production. The results from the column filtration tests indicated the feasibility of using the selected GAC (Filtrasorb 400 -Calgon Carbon Corporation) to achieve the respect of the discharge limits in the slops treatment with a carbon usage rate in the range 0.1-0.3 kg/m3 of treated effluent. Moreover, biological regeneration through Alcalinovorax borkumensis SK2 was proved to be a cost-effective procedure since the reuse of spent GAC through such regeneration process for further treatment could still achieve approximately 90% of the initial sorption capacity, reducing then costs for the use of new sorbents and also the need for waste disposal.

Use of a reactive transport model to describe reductive dechlorination (RD) as a remediation design tool: application at a CAH-contaminated site.

In this paper, a numerical model is presented that is capable of describing the complex set of biochemical processes that occur in chlorinated aliphatic hydrocarbon (CAH)-contaminated groundwater when an exogenous electron donor is added. The reactive pattern is based on the degradation pathways of both chlorinated ethanes and ethenes, and it includes electron donor production (H2 and acetate) from the fermentation of an organic substrate as well as rate-limiting processes related to electron acceptor competition. Coupling of the kinetic model to a convection-dispersion module is described. The calibration phase was carried out using data obtained at a real CAH-contaminated site in the north of Italy. Model simulations of different application scenarios are presented to draw general conclusions on the effectiveness of reductive dechlorination (RD) as a possible cleanup strategy. Early outcomes indicate that cleanup targets can only be achieved if source longevity is reduced. Therefore, metabolic RD is expected to produce beneficial effects because it is known to induce bioenhanced degradation and transformation of CAHs.

An integrated wastewater treatment system using a BAS reactor with biomass attached to tubular supports.

This paper describes laboratory experiments aimed to develop a new wastewater treatment system as an alternative to a conventional domestic wastewater plant. A modified Biofilm Airlift Suspension reactor (BAS), with biomass attached to tubular supports, is proposed to address low organic loads (typical of domestic sewage) and low residence time (typical of compact reactors technology). Attached and suspended biomasses, coupled to the high dissolved oxygen (DO), allow high removal efficiencies (90% and 56% for COD and N-NH(4)(+) removal respectively) and high effluent quality to be reached. The experimental activity, divided into three parts, demonstrates the good efficiency of the process, and the reduction of the removal kinetics for the high operating pressure used in the technology. The occurrence of simultaneous nitrification-denitrification (SND) was also observed. When compared with the conventional BAS system, the present treatment shows comparable removal efficiencies and higher specific removal rates (80 mg COD/g VSS and 2.60 mg N-NH(4)(+)/g VSS). The experimental results were coupled with the development of a numerical model to aid in designing a full-scale treatment plant in Italy.

Pneumomediastinum and subcutaneous emphysema unusual complications of blunt facial trauma.

We described a rare case of pneumomediastinum following an isolated facial trauma. Traumatic pneumomediastinum is usually secondary to a blunt or penetrating neck, chest or abdominal trauma.

Laboratory investigation of DNAPL migration in porous media.

Laboratory experiments have been carried out with and without groundwater flow in a two-dimensional laboratory-scale tank to assess the influence of layered media and hydraulic gradient on DNAPL infiltration and redistribution processes. Hydrofluoroether has been used as DNAPL and glass beads have been utilized as porous medium. An image analysis procedure has been used to determine saturation distribution during infiltration and redistribution processes. This method allows quantitative time dependent full fields mapping of the DNAPL saturation, as well as the monitoring of DNAPL saturation variation. By means of performed experiments important information were obtained about the migration and redistribution process, the infiltration and migration velocity, the characteristics of migration body. The experimental results show that the hydraulic gradient promotes the infiltration process, increasing the infiltration rate. It hampers DNAPL spread and fingering bringing to a reduction of residual DNAPL and it also promotes the DNAPL redistribution, and it reduces the amount remaining at residual saturation. Furthermore the hydraulic gradient promotes downward and down-gradient migration. DNAPL migration in the direction of water flow, can be considered important due to significant errors in the location of sources in the case of high gradients and high aquifer thicknesses, and for high water flow velocities, such as those which can be expected during pumping actions in water supply or in remediation activities.