RESUMEN
Liquid sodium is an attractive working fluid for thermoacoustic conversion. Herein, a numerical study on a standing-wave thermoacoustic electricity generation system with liquid sodium as the working fluid is presented, based upon the Swift model. The characteristics of the thermoacoustic conversion and the output performance of the system have been investigated. The results show that the sodium engine can reach a power density much higher than the classical gas engine. Due to the strong acoustic coupling between components, the electricity output is significantly affected by the input heating power, the magnetic flux density, and the load ratio. In a typical case, the thermal-to-electric efficiency and the relative Carnot efficiency can reach 4.6% and 7.8%, respectively, with a temperature difference of 563 K and an input heat of 5 kW. More importantly, the output electricity density reaches 150 kW/m3, higher than some commercially available technologies. These results demonstrate the potential of such technology for small-scale electricity generation. Its extremely simple structure without any mechanical moving part endows the system with high reliability and long lifetime, if risks of corrosion and exposure to air and water can be avoided.
RESUMEN
This article seeks to perform a combination of methodologies to fully model and evaluate the rudimentary performance of a thermoacoustic engine integrated with a piezoelectric energy harvester (TAP). First, the root locus method was employed to determine the critical design operating values of the thermoacoustic engine. Later, a lumped parameter model was developed as a matlab Simulink program to calculate the transient temperature and pressure responses of the thermoacoustic engine. In addition, a two-element reduced model (executed on matlab) and finite element analysis tools were used to simulate and assess the performance of aluminum-piezo (lead zirconate titanate (PZT-5H) and lead manganese niobate-lead titanate (PMN-PT)) disks that are to be integrated with the thermoacoustic engine. Last but most importantly, the piezo-diaphragm and thermoacoustic engine were coupled using the electrical analogy technique through which the onset conditions and resonance frequency of the integrated TAP system were determined. We take a traveling wave thermoacoustic engine and a commercially available piezoelectric disk as a test case for the analysis. It is concluded that the outcomes from the multiple methods are in good agreement with the experimental results.
RESUMEN
Single-pressure refractive-index gas thermometry (SPRIGT) is a new type primary thermometry jointly developed by TIPC of CAS in China and LNE-Cnam in France. To realize a competitive uncertainty of 0.25 mK for the thermodynamic temperature measurement, a cryogen-free cryostat with high-stability better than 0.2 mK should be designed. This paper presented the first experimental results of temperature control for this cryostat. To realize this objective, multi-layer radiation shields combined with a thermal-resistance method were used to isolate the thermal-noise from surroundings. Besides, a new temperature control method based on a gas-type heat switch and proportional-integral-derivative control method was proposed, which was applicable to different temperature ranges by changing the working modes of the heat switch. After optimizing, the ultra-high precision temperature control in the range of 5-25 K has been fully realized, which was the temperature instability (with standard deviation) of 0.021 mK at 5.0 K, 0.05 mK at 5.7 K, 0.042 mK at 7.4 K, 0.029 mK at 14.3 K, and 0.022 mK at 25 K with the sampling time of 0.8 s. This was almost the best reporting result in the world and showed its great potential in SPRIGT.
RESUMEN
Thermoacoustic prime movers can generate pressure oscillation without any moving parts on self-excited thermoacoustic effect. The details of the numerical simulation methodology for thermoacoustic engines are presented in the paper. First, a four-port network method is used to build the transcendental equation of complex frequency as a criterion to judge if temperature distribution of the whole thermoacoustic system is correct for the case with given heating power. Then, the numerical simulation of a thermoacoustic-Stirling heat engine is carried out. It is proved that the numerical simulation code can run robustly and output what one is interested in. Finally, the calculated results are compared with the experiments of the thermoacoustic-Stirling heat engine (TASHE). It shows that the numerical simulation can agrees with the experimental results with acceptable accuracy.
