Enhanced dielectric constant and breakdown strength of sandwiched polymer nanocomposite film for excellent energy storage.

Enhanced dielectric constant and high breakdown strength offers immense promise for excellent energy storage performance, which is of critical significance in modern electronics and power systems. However, polymer nanocomposites with traditional routes have to balance between dielectric constant and breakdown strength, hence hindering substantive increases in energy density. Herein, a sandwiched polymer nanocomposite film has been constructed to take full advantage of the individual component layers. BaTiO3 nanoparticles are coated with a fluoropolymer to form core-shell structures and then introduced into a polymer as the top and the bottom layers of a sandwich film for enhancing polarization. Moreover, boron nitride nanosheets (BNNSs) in the middle layer of the sandwich film exert positive effects on the inhibition of current leakage for high breakdown resistance. The breakdown strength increases from 480 MV m-1 of the neat polymer to 580 MV m-1 of the sandwiched film. Additionally, the film exhibits a higher dielectric constant in comparison with the neat polymer. The sandwiched film displays a superior energy density (15.75 J cm-3), which is about 1.9 times that of the neat polymer. This work proposes a feasible route to achieve excellent energy storage of polymer dielectrics by synergistically introducing insulating fillers and additional dipoles in a sandwiched polymer nanocomposite film.

Scalable Dual In Situ Synthesis of Polyester Nanocomposites for High-Energy Storage.

Incorporating ultralow loading of nanoparticles into polymers has realized increases in dielectric constant and breakdown strength for excellent energy storage. However, there are still a series of tough issues to be dealt with, such as organic solvent uses, which face enormous challenges in scalable preparation. Here, a new strategy of dual in situ synthesis is proposed, namely polymerization of polyethylene terephthalate (PET) synchronizes with growth of calcium borate nanoparticles, making polyester nanocomposites from monomers directly. Importantly, this route is free of organic solvents and surface modification of nanoparticles, which is readily accessible to scalable synthesis of polyester nanocomposites. Meanwhile, uniform dispersion of as ultralow as 0.1 wt% nanoparticles and intense bonding at interfaces have been observed. Furthermore, the PET-based nanocomposite displays obvious increases in both dielectric constant and breakdown strength as compared to the neat PET. Its maximum discharged energy density reaches 15 J cm-3 at 690 MV m-1 and power density attains 218 MW cm-3 under 150 Ω resistance at 300 MV m-1, which is far superior to the current dielectric polymers that can be produced at large scales. This work presents a scalable, safe, low-cost, and environment-friendly route toward polymer nanocomposites with superior capacitive performance.