A Difluoro-Methoxylated Ending-Group Asymmetric Small Molecule Acceptor Lead Efficient Binary Organic Photovoltaic Blend.

Developing a new end group for synthesizing asymmetric small molecule acceptors (SMAs) is crucial for achieving high-performance organic photovoltaics (OPVs). Herein, an asymmetric small molecule acceptor, BTP-BO-4FO, featuring a new difluoro-methoxylated end-group is reported. Compared to its symmetric counterpart L8-BO, BTP-BO-4FO exhibits an upshifted energy level, larger dipole moment, and more sequential crystallinity. By adopting two representative and widely available solvent additives (1-chloronaphthalene (CN) and 1,8-diiodooctane (DIO)), the device based on PM6:BTP-BO-4FO (CN) photovoltaic blend demonstrates a power conversion efficiency (PCE) of 18.62% with an excellent open-circuit voltage (VOC) of 0.933 V, which surpasses the optimal result of L8-BO. The PCE of 18.62% realizes the best efficiencies for binary OPVs based on SMAs with asymmetric end groups. A series of investigations reveal that optimized PM6:BTP-BO-4FO film demonstrates similar molecular packing motif and fibrillar phase distribution as PM6:L8-BO (DIO) does, resulting in comparable recombination dynamics, thus, similar fill factor. Besides, it is found PM6:BTP-BO-4FO possesses more efficient charge generation, which yields better VOC-JSC balance. This study provides a new ending group that enables a cutting-edge efficiency in asymmetric SMA-based OPVs, enriching the material library and shed light on further design ideas.

Knowledge, attitudes, and practices toward cardiovascular complications among end-stage renal disease patients undergoing maintenance hemodialysis.

BACKGROUND: This study aimed to investigate the knowledge, attitudes, and practices (KAP) toward cardiovascular complications among end-stage renal disease patients undergoing maintenance hemodialysis. METHODS: This web-based cross-sectional study was conducted at Guangdong Provincial People's Hospital between December 2022, and May 2023. RESULTS: A total of 545 valid questionnaires were collected, with an average age of 57.72 ± 13.47 years. The mean knowledge, attitudes and practices scores were 8.17 ± 2.9 (possible range: 0-24), 37.63 ± 3.80 (possible range: 10-50), 33.07 ± 6.10 (possible range: 10-50) respectively. Multivariate logistic regression analysis showed that patients from non-urban area had lower knowledge compared to those from urban area (odds ratio (OR) = 0.411, 95% CI: 0.262-0.644, P < 0.001). Furthermore, higher levels of education were associated with better knowledge, as indicated by OR for college and above (OR = 4.858, 95% CI: 2.483-9.504), high school/vocational school (OR = 3.457, 95% CI: 1.930-6.192), junior high school (OR = 3.300, 95% CI: 1.945-5.598), with primary school and below as reference group (all P < 0.001). Besides, better knowledge (OR = 1.220, 95% CI: 1.132-1.316, P < 0.001) and higher educational levels were independently associated with positive attitudes. Specifically, individuals with a college degree and above (OR = 2.986, 95% CI: 1.411-6.321, P = 0.004) and those with high school/vocational school education (OR = 2.418, 95% CI: 1.314-4.451, P = 0.005) have more positive attitude, with primary school and below as reference group. Next, better attitude (OR = 1.174, 95% CI: 1.107-1.246, P < 0.001) and higher education were independently associated with proactive practices. Those with college and above (OR = 2.870, 95% CI: 1.359-6.059, P = 0.006), and those with high school/vocational school education (OR = 1.886, 95% CI: 1.032-3.447, P = 0.039) had more proactive practices, with primary school and below as reference group. CONCLUSIONS: End-stage renal disease patients undergoing maintenance hemodialysis demonstrated insufficient knowledge, positive attitudes, and moderate practices regarding cardiovascular complications. Targeted interventions should prioritize improving knowledge and attitudes, particularly among patients with lower educational levels and income, to enhance the management of cardiovascular complications in end-stage renal disease.

Precise Methylation Yields Acceptor with Hydrogen-Bonding Network for High-Efficiency and Thermally Stable Polymer Solar Cells.

Utilizing intermolecular hydrogen-bonding interactions stands for an effective approach in advancing the efficiency and stability of small-molecule acceptors (SMAs) for polymer solar cells. Herein, we synthesized three SMAs (Qo1, Qo2, and Qo3) using indeno[1,2-b]quinoxalin-11-one (Qox) as the electron-deficient group, with the incorporation of a methylation strategy. Through crystallographic analysis, it is observed that two Qox-based methylated acceptors (Qo2 and Qo3) exhibit multiple hydrogen bond-assisted 3D network transport structures, in contrast to the 2D transport structure observed in gem-dichlorinated counterpart (Qo4). Notably, Qo2 exhibits multiple and stronger hydrogen-bonding interactions compared with Qo3. Consequently, PM6 : Qo2 device realizes the highest power conversion efficiency (PCE) of 18.4 %, surpassing the efficiencies of devices based on Qo1 (15.8 %), Qo3 (16.7 %), and Qo4 (2.4 %). This remarkable PCE in PM6 : Qo2 device can be primarily ascribed to the enhanced donor-acceptor miscibility, more favorable medium structure, and more efficient charge transfer and collection behavior. Moreover, the PM6 : Qo2 device demonstrates exceptional thermal stability, retaining 82.8 % of its initial PCE after undergoing annealing at 65 °C for 250 hours. Our research showcases that precise methylation, particularly targeting the formation of intermolecular hydrogen-bonding interactions to tune crystal packing patterns, represents a promising strategy in the molecular design of efficient and stable SMAs.

Step-by-Step Modulation of Crystalline Features and Exciton Kinetics for 19.2% Efficiency Ortho-Xylene Processed Organic Solar Cells.

With plenty of popular and effective ternary organic solar cells (OSCs) construction strategies proposed and applied, its power conversion efficiencies (PCEs) have come to a new level of over 19% in single-junction devices. However, previous studies are heavily based in chloroform (CF) leaving behind substantial knowledge deficiencies in understanding the influence of solvent choice when introducing a third component. Herein, we present a case where a newly designed asymmetric small molecular acceptor using fluoro-methoxylated end-group modification strategy, named BTP-BO-3FO with enlarged bandgap, brings different morphological evolution and performance improvement effect on host system PM6:BTP-eC9, processed by CF and ortho-xylene (o-XY). With detailed analyses supported by a series of experiments, the best PCE of 19.24% for green solvent-processed OSCs is found to be a fruit of finely tuned crystalline ordering and general aggregation motif, which furthermore nourishes a favorable charge generation and recombination behavior. Likewise, over 19% PCE can be achieved by replacing spin-coating with blade coating for active layer deposition. This work focuses on understanding the commonly met yet frequently ignored issues when building ternary blends to demonstrate cutting-edge device performance, hence, will be instructive to other ternary OSC works in the future.

High-Performance Organic Solar Cells Containing Pyrido[2,3-b]quinoxaline-Core-Based Small-Molecule Acceptors with Optimized Orbit Overlap Lengths and Molecular Packing.

The central core in A-DA1 D-A-type small-molecule acceptor (SMAs) plays an important role in determining the efficiency of organic solar cells (OSCs), while the principles governing the efficient design of SMAs remain elusive. Herein, we developed a series of SMAs with pyrido[2,3-b]quinoxaline (PyQx) as new electron-deficient unit by combining with the cascade-chlorination strategy, namely Py1, Py2, Py3, Py4 and Py5. The introduction of chlorine atoms reduces the intramolecular charge transfer effects but elevates the LUMO values. Density functional theory (DFT) reveals that Py2 with ortho chlorine substituted PyQx and Py5 with two chlorine atoms yield larger dipole moments and smaller π⋅⋅⋅π stacking distances, as compared with the other three acceptors. Moreover, Py2 shows the strongest light absorption capability induced by extended orbit overlap lengths and more efficient packing structures in the dimers. These features endow the best device performance of Py2 due to the better molecular packing and aggregation behaviors, more suitable domain sizes with better exciton dissociation and charge recombination. This study highlights the significance of incorporating large dipole moments, small π⋅⋅⋅π stacking distances and extended orbit overlap lengths in dimers into the development of high-performance SMAs, providing insight into the design of efficient A-DA1 D-A-type SMAs for OSCs.

Zinc-glutathione in Chinese Baijiu prevents alcohol-associated liver injury.

Zinc depletion is associated with alcohol-associated liver injury. We tested the hypothesis that increasing zinc availability along with alcohol consumption prevents alcohol-associated liver injury. Zinc-glutathione (ZnGSH) was synthesized and directly added to Chinese Baijiu. Mice were administered a single gastric dose of 6 g/kg ethanol in Chinese Baijiu with or without ZnGSH. ZnGSH in Chinese Baijiu did not change the likeness of the drinkers but significantly reduced the recovery time from drunkenness along with elimination of high-dose mortality. ZnGSH in Chinese Baijiu decreased serum AST and ALT, suppressed steatosis and necrosis, and increased zinc and GSH concentrations in the liver. It also increased alcohol dehydrogenase and aldehyde dehydrogenase in the liver, stomach, and intestine and reduced acetaldehyde in the liver. Thus, ZnGSH in Chinese Baijiu prevents alcohol-associated liver injury by increasing alcohol metabolism timely with alcohol consumption, providing an alternative approach to the management of alcohol-associated drinking.

Efficient All-Polymer Solar Cells Enabled by Interface Engineering.

All-polymer solar cells (all-PSCs) are organic solar cells in which both the electron donor and the acceptor are polymers and are considered more promising in large-scale production. Thanks to the polymerizing small molecule acceptor strategy, the power conversion efficiency of all-PSCs has ushered in a leap in recent years. However, due to the electrical properties of polymerized small-molecule acceptors (PSMAs), the FF of the devices is generally not high. The typical electron transport material widely used in these devices is PNDIT-F3N, and it is a common strategy to improve the device fill factor (FF) through interface engineering. This work improves the efficiency of all-polymer solar cells through interfacial layer engineering. Using PDINN as the electron transport layer, we boost the FF of the devices from 69.21% to 72.05% and the power conversion efficiency (PCE) from 15.47% to 16.41%. This is the highest efficiency for a PY-IT-based binary all-polymer solar cell. This improvement is demonstrated in different all-polymer material systems.

Heteroheptacene-based acceptors with thieno[3,2-b]pyrrole yield high-performance polymer solar cells.

Rationally utilizing and developing synthetic units is of particular significance for the design of high-performance non-fullerene small-molecule acceptors (SMAs). Here, a thieno[3,2-b]pyrrole synthetic unit was employed to develop a set of SMAs (ThPy1, ThPy2, ThPy3 and ThPy4) by changing the number or the position of the pyrrole ring in the central core based on a standard SMA of IT-4Cl, compared to which the four thieno[3,2-b]pyrrole-based acceptors exhibit bathochromic absorption and upshifted frontier orbital energy level due to the strong electron-donating ability of pyrrole. As a result, the polymer solar cells (PSCs) of the four thieno[3,2-b]pyrrole-based acceptors yield higher open-circuit voltage and lower energy loss relative to those of the IT-4Cl-based device. What is more, the ThPy3-based device achieves a power conversion efficiency (PCE) (15.3%) and an outstanding fill factor (FF) (0.771) that are superior to the IT-4Cl-based device (PCE = 12.6%, FF = 0.758). The ThPy4-based device realizes the lowest energy loss and the smallest optical band gap, and the ternary PSC device based on PM6:BTP-eC9:ThPy4 exhibits a PCE of 18.43% and a FF of 0.802. Overall, this work sheds light on the great potential of thieno[3,2-b]pyrrole-based SMAs in realizing low energy loss and high PCE.

Boosting the Efficiency of Non-fullerene Organic Solar Cells via a Simple Cathode Modification Method.

This work demonstrates a simple yet effective method to significantly improve the power conversion efficiency (PCE) of highly efficient non-fullerene organic solar cells by mixing two electron transport materials. The new electron transport layer shows an energy level better aligned with the active layer and an improved morphology that could reduce the active layer-electrode contact. These improvements lead to enhanced charge extraction, better charge selectivity, suppressed exciton recombination, and finally a boosted PCE in the PM6:Y6-based solar cells. When applied in conjunction with the non-halogenated solvent-processed PM6:PY-IT-based active layer, the mixed ETL also gives rise to a leading result for binary all-polymer solar cells (PCE of >16%) with a concurrent increase in VOC, JSC, and FF.

Boosting Highly Efficient Hydrocarbon Solvent-Processed All-Polymer-Based Organic Solar Cells by Modulating Thin-Film Morphology.

Many highly efficient all-polymer-based organic solar cells (OSCs) have been achieved owing to material design and device engineering. However, most of them were achieved by using halogenated solvents to process the active layers, being not beneficial to its nature of green energy technology. In this work, we compared chloroform- and toluene-processed PM6:PY-IT-based all-polymer devices with the same blend solution recipe, same film formation speed, and same postcast treatment. The film cast from toluene exhibited weaker crystallinity. For device performance, toluene enabled a better power conversion efficiency (PCE) of 15.51%, outperforming that of chloroform (15.00%), and it is the highest value for non-halogenated solvent-cast all-polymer-based OSCs to date. Toluene's morphology tuning effect was characterized to increase and balance the charge transport and then suppress the exciton recombination and improve the charge extraction, considered to be the reason for efficiency enhancement. Besides, the toluene-cast active layer-based devices showed slightly better photostability than the chloroform-driven ones. This work provided a new direction for building low-toxicity solvent-treated all-polymer OSCs with cutting-edge performance.

GmST1, which encodes a sulfotransferase, confers resistance to soybean mosaic virus strains G2 and G3.

Soybean mosaic virus (SMV) is one of the most widespread and devastating viral diseases worldwide. The genetic architecture of qualitative resistance to SMV in soybean remains unclear. Here, the Rsvg2 locus was identified as underlying soybean resistance to SMV by genome-wide association and linkage analyses. Fine mapping results showed that soybean resistance to SMV strains G2 and G3 was controlled by a single dominant gene, GmST1, on chromosome 13, encoding a sulfotransferase (SOT). A key variation at position 506 in the coding region of GmST1 associated with the structure of the encoded SOT and changed SOT activity levels between RSVG2-S and RSVG2-R alleles. In RSVG2-S allele carrier "Hefeng25", the overexpression of GmST1 carrying the RSVG2-R allele from the SMV-resistant line "Dongnong93-046" conferred resistance to SMV strains G2 and G3. Compared to Hefeng25, the accumulation of SMV was decreased in transgenic plants carrying the RSVG2-R allele. SMV infection differentiated both the accumulation of jasmonates and expression patterns of genes involved in jasmonic acid (JA) signalling, biosynthesis and catabolism in RSVG2-R and RSVG2-S allele carriers. This characterization of GmST1 suggests a new scenario explaining soybean resistance to SMV.

Regio-Regular Polymer Acceptors Enabled by Determined Fluorination on End Groups for All-Polymer Solar Cells with 15.2 % Efficiency.

Polymerization sites of small molecule acceptors (SMAs) play vital roles in determining device performance of all-polymer solar cells (all-PSCs). Different from our recent work about fluoro- and bromo- co-modified end group of IC-FBr (a mixture of IC-FBr1 and IC-FBr2), in this paper, we synthesized and purified two regiospecific fluoro- and bromo- substituted end groups (IC-FBr-o & IC-FBr-m), which were then employed to construct two regio-regular polymer acceptors named PYF-T-o and PYF-T-m, respectively. In comparison with its isomeric counterparts named PYF-T-m with different conjugated coupling sites, PYF-T-o exhibits stronger and bathochromic absorption to achieve better photon harvesting. Meanwhile, PYF-T-o adopts more ordered inter-chain packing and suitable phase separation after blending with the donor polymer PM6, which resulted in suppressed charge recombination and efficient charge transport. Strikingly, we observed a dramatic performance difference between the two isomeric polymer acceptors PYF-T-o and PYF-T-m. While devices based on PM6:PYF-T-o can yield power conversion efficiency (PCE) of 15.2 %, devices based on PM6:PYF-T-m only show poor efficiencies of 1.4 %. This work demonstrates the success of configuration-unique fluorinated end groups in designing high-performance regular polymer acceptors, which provides guidelines towards developing all-PSCs with better efficiencies.

Precisely Controlling the Position of Bromine on the End Group Enables Well-Regular Polymer Acceptors for All-Polymer Solar Cells with Efficiencies over 15.

Recent advances in the development of polymerized A-D-A-type small-molecule acceptors (SMAs) have promoted the power conversion efficiency (PCE) of all-polymer solar cells (all-PSCs) over 13%. However, the monomer of an SMA typically consists of a mixture of three isomers due to the regio-isomeric brominated end groups (IC-Br(in) and IC-Br(out)). In this work, the two isomeric end groups are successfully separated, the regioisomeric issue is solved, and three polymer acceptors, named PY-IT, PY-OT, and PY-IOT, are developed, where PY-IOT is a random terpolymer with the same ratio of the two acceptors. Interestingly, from PY-OT, PY-IOT to PY-IT, the absorption edge gradually redshifts and electron mobility progressively increases. Theory calculation indicates that the LUMOs are distributed on the entire molecular backbone of PY-IT, contributing to the enhanced electron transport. Consequently, the PM6:PY-IT system achieves an excellent PCE of 15.05%, significantly higher than those for PY-OT (10.04%) and PY-IOT (12.12%). Morphological and device characterization reveals that the highest PCE for the PY-IT-based device is the fruit of enhanced absorption, more balanced charge transport, and favorable morphology. This work demonstrates that the site of polymerization on SMAs strongly affects device performance, offering insights into the development of efficient polymer acceptors for all-PSCs.

Conformation-Tuning Effect of Asymmetric Small Molecule Acceptors on Molecular Packing, Interaction, and Photovoltaic Performance.

Understanding the conformation effect on molecular packing, miscibility, and photovoltaic performance is important to open a new avenue for small-molecule acceptor (SMA) design. Herein, two novel acceptor-(donor-acceptor1-donor)-acceptor (A-DA1D-A)-type asymmetric SMAs are developed, namely C-shaped BDTP-4F and S-shaped BTDTP-4F. The BDTP-4F-based polymer solar cells (PSCs) with PM6 as donor, yields a power conversion efficiency (PCE) of 15.24%, significantly higher than that of the BTDTP-4F-based device (13.12%). The better PCE for BDTP-4F-based device is mainly attributed to more balanced charge transport, weaker bimolecular recombination, and more favorable morphology. Additionally, two traditional A-D-A-type SMAs (IDTP-4F and IDTTP-4F) are also synthesized to investigate the conformation effect on morphology and device performance. Different from the device result above, here, IDTP-4F with S-shape conformation outperforms than IDTTP-4F with C-shape conformation. Importantly, it is found that for these two different types of SMA, the better performing binary blend has similar morphological characteristics. Specifically, both PM6:BDTP-4F and PM6:IDTP-4F blend exhibit perfect nanofibril network structure with proper domain size, obvious face-on orientation and enhance donor-acceptor interactions, thereby better device performance. This work indicates tuning molecular conformation plays pivotal role in morphology and device effciciency, shining a light on the molecular design of the SMAs.

A Non-Conjugated Polymer Acceptor for Efficient and Thermally Stable All-Polymer Solar Cells.

A non-conjugated polymer acceptor PF1-TS4 was firstly synthesized by embedding a thioalkyl segment in the mainchain, which shows excellent photophysical properties on par with a fully conjugated polymer, with a low optical band gap of 1.58 eV and a high absorption coefficient >105  cm-1 , a high LUMO level of -3.89 eV, and suitable crystallinity. Matched with the polymer donor PM6, the PF1-TS4-based all-PSC achieved a power conversion efficiency (PCE) of 8.63 %, which is ≈45 % higher than that of a device based on the small molecule acceptor counterpart IDIC16. Moreover, the PF1-TS4-based all-PSC has good thermal stability with ≈70 % of its initial PCE retained after being stored at 85 °C for 180 h, while the IDIC16-based device only retained ≈50 % of its initial PCE when stored at 85 °C for only 18 h. Our work provides a new strategy to develop efficient polymer acceptor materials by linkage of conjugated units with non-conjugated thioalkyl segments.

Simultaneous enhanced efficiency and thermal stability in organic solar cells from a polymer acceptor additive.

The thermal stability of organic solar cells is critical for practical applications of this emerging technology. Thus, effective approaches and strategies need to be found to alleviate their inherent thermal instability. Here, we show a polymer acceptor-doping general strategy and report a thermally stable bulk heterojunction photovoltaic system, which exhibits an improved power conversion efficiency of 15.10%. Supported by statistical analyses of device degradation data, and morphological characteristics and physical mechanisms study, this polymer-doping blend shows a longer lifetime, nearly keeping its efficiency (t = 800 h) under accelerated aging tests at 150 oC. Further analysis of the degradation behaviors indicates a bright future of this system in outer space applications. Notably, the use of polymer acceptor as a dual function additive in the other four photovoltaic systems was also confirmed, demonstrating the good generality of this polymer-doping strategy.

Novel Nitrogen-Containing Heterocyclic Non-Fullerene Acceptors for Organic PhotovoltaicCells: Different End-Capping Groups Leading to a Big Difference of Power Conversion Efficiencies.

Novel cores for high performance nonfullerene acceptors (NFAs) remain to be developed. In this work, two new n-type nitrogen-containing organic heterocyclic NFAs, namely, BDTN-BF and BDTN-Th, were designed and synthesized based on a new seven fused-ring core (BDTN) with two different end-capping groups. As a result, BDTN-BF possessed similar absorption spectra in solution and solid state to BDTN-Th, but a slightly higher maximum molar extinction coefficient. Manufacturing the polymer solar cells with PM6 as the donor, the photovoltaic performance of BDTN-BF and BDTN-Th was investigated. The PM6:BDTN-BF-based device achieved the highest power conversion efficiency (PCE) of 11.54% with a high Jsc of 20.20 mA cm-2, a fill factor (FF) of 61.46%, and a large Voc of 0.93 V, and the energy loss (Eloss) was calculated to be 0.48 eV. Comparatively, the PM6:BDTN-Th-based device achieved the maximum PCE value of only 3.53% because of inadequate Jsc and FF. The higher Jsc and FF for the PM6:BDTN-BF-based device was mainly due to the effective electron transfer from PM6 to BDTN-BF, more balanced µh/µe, higher electron mobility of the neat film, better charge collection and dissociation efficiency, and more favorable morphology. These results demonstrate that the acceptors with nearly identical absorption spectra could result in a significant difference in photovoltaic performance, which stress the importance of end-capping units. Furthermore, few NFA-based devices achieve large Voc and high Jsc simultaneously as one based on PM6:BDTN-BF, indicating that nitrogen hybridization of NFAs may be an efficient strategy to realize high and balanced Voc and Jsc.

In situ Fabrication of Nano ZnO/BCM Biocomposite Based on MA Modified Bacterial Cellulose Membrane for Antibacterial and Wound Healing.

BACKGROUND: Developing an ideal wound dressing that meets the multiple demands of safe and practical, good biocompatibility, superior mechanical property and excellent antibacterial activity is highly desirable for wound healing. Bacterial cellulose (BC) is one of such promising class of biopolymers since it can control wound exudates and can provide moist environment to a wound resulting in better wound healing. However, the lack of antibacterial activity has limited its application. METHODS AND RESULTS: We prepared a flexible dressing based on a bacterial cellulose membrane and then modified it by chemical crosslinking to prepare in situ synthesis of nZnO/BCM via a facile and eco-friendly approach. Scanning electron microscopy (SEM) results indicated that nZnO/BCM membranes were characterized by an ideal porous structure (pore size: 30~ 90 µm), forming a unique string-beaded morphology. The average water vapor transmission of nZnO/BCM was 2856.60 g/m2/day, which improved the moist environment of nZnO/BCM. ATR-FITR further confirmed the stepwise deposition of nano-zinc oxide. Tensile testing indicated that our nanocomposites were flexible, comfortable and resilient. Bacterial suspension assay and plate counting methods demonstrated that 5wt. % nZnO/BCM possessed excellent antibacterial activity against S.aureus and E. coli, while MTT assay demonstrated that they had no measurable cytotoxicity toward mammalian cells. Moreover, skin irritation test and histocompatibility examination supported that 5wt. % nZnO/BCM had no stimulation to skin and had acceptable biocompatibility with little infiltration of the inflammatory cells. Finally, by using a bacteria-infected (S. aureus and E. coli) murine wound model, we found that nZnO/BCM could prevent in vivo bacterial infections and promote wound healing via accelerating the re-epithelialization and wound contraction, and these membranes had no obvious toxicity toward normal tissues. CONCLUSION: Therefore, the constructed nZnO/BCM has great potential for biomedical applications as an efficient antibacterial wound dressing.

Arahyside A, a new norsesquiterpene from Arachis hypogaea.

Six compounds were isolated from the stems and leaves of Arachis hypogaea, including a new norsesquiterpene, arahyside A (1), and five known compounds, 4-(2-methoxyethyl)benzene-1,2-diol (2), (1(R,S),2(R,S))-1-phenylpropane-1,2-diol (3), tachioside (4), 1,3-benzenediol (5), demethylmedicarpin (6). Extensive spectroscopic methods, containing HR-EI-MS, NMR and ECD were used for structural elucidation of this new compound 1. Furthermore, its cytotoxicity was evaluated by MTT assay.

Isomerization of Perylene Diimide Based Acceptors Enabling High-Performance Nonfullerene Organic Solar Cells with Excellent Fill Factor.

A strategy that employs the central-core regiochemistry to develop two isomeric perylene diimide (PDI)-based small molecular acceptors (SMAs), BPT-Se and BPT-Se1, is introduced, and the effect of the central-core regiochemistry on the optical, electronic, charge-transport, photovoltaic, and morphological properties of the molecules and their devices is investigated. The PDBT-T1:BPT-Se1-based device delivers a power conversion efficiency (PCE) of 9.54% with an excellent fill factor (FF) of 73.2%, while the BPT-Se-based device yields a PCE of 7.78%. The large improvement of PCE upon isomerization of BPT-Se should be ascribed to the concurrent enhancement of FF, short circuit current ( J SC), and open circuit voltage (V OC) of the PDBT-T1:BPT-Se1 devices. The higher FF of the organic solar cells (OSCs) based on PDBT-T1:BPT-Se1 can be attributed to the higher charge dissociation and charge collection efficiency, less bimolecular combination, more balanced µ h/µ e, better molecular packing and a more favorable morphology. It is worth mentioning that the FF of 73.2% is the highest value for PDI-based SMAs OSCs to date. The result shows that regiochemistry of the central core in PDI-based SMAs greatly affects the physicochemical properties and photovoltaic performance. The success of the isomerization strategy offers exciting prospects for the molecular design of PDI-based SMAs.