PHB3 interacts with BRI1 and BAK1 to mediate brassinosteroid signal transduction in Arabidopsis and tomato.

Brassinosteroids (BRs) are plant hormones that are essential in plant growth and development. BRASSINOSTEROID-INSENSITIVE 1 (BRI1) and BRI1 ASSOCIATED RECEPTOR KINASE 1 (BAK1), which are located on the plasma membrane, function as co-receptors that accept and transmit BR signals. PROHIBITIN 3 (PHB3) was identified in both BRI1 and BAK1 complexes by affinity purification and LC-MS/MS analysis. Biochemical data showed that BRI1/BAK1 interacted with PHB3 in vitro and in vivo. BRI1/BAK1 phosphorylated PHB3 in vitro. When the Thr-80 amino acid in PHB3 was mutated to Ala, the mutant protein was not phosphorylated by BRI1 and the mutant protein interaction with BRI1 was abolished in the yeast two-hybrid assay. BAK1 did not phosphorylate the mutant protein PHB3T54A . The loss-of-function phb3 mutant showed a weaker BR signal than the wild-type. Genetic analyses revealed that PHB3 is a BRI1/BAK1 downstream substrate that participates in BR signalling. PHB3 has five homozygous in tomato, and we named the closest to AtPHB3 as SlPHB3.1. Biochemical data showed that SlBRI1/SlSERK3A/SlSERK3B interacted with SlPHB3.1 and SlPHB3.3. The CRISPR-Cas9 method generated slphb3.1 mutant led to a BR signal stunted relatively in tomatoes. PHB3 is a new component of the BR signal pathway in both Arabidopsis and tomato.

Preparation of high-efficiency titanium ion immobilized magnetic graphite nitride nanocomposite for phosphopeptide enrichment.

BACKGROUND: Protein phosphorylation has been implicated in life processes including molecular interaction, protein structure transformation, and malignant disease. An in-depth study of protein phosphorylation may provide vital information for the discovery of early biomarkers. Mass spectrometry (MS)-based techniques have become an important method for phosphopeptide identification. Nevertheless, direct detection remains challenging because of the low ionization efficiency of phosphopeptides and serious interference from non-phosphopeptides. There is a great need for an efficient enrichment strategy to analyze protein phosphorylation prior to MS analysis. RESULTS: In this study, a novel nanocomposite was prepared by introducing titanium ions into two-dimensional magnetic graphite nitride. The nanocomposite was combined with immobilized metal ion affinity chromatography (IMAC) and anion-exchange chromatography mechanisms for phosphoproteome research. The nanocomposite had the advantages of a large specific surface (412.9 m2 g-1), positive electricity (175.44 mV), and excellent magnetic property (35.7 emu g-1). Moreover, it presented satisfactory selectivity (α-casein:ß-casein:bovine serum albumin = 1:1:5000), a low detection limit (0.02 fmol), great recyclability (10 cycles), and high recovery (92.8%). The nanocomposite demonstrated great practicability for phosphopeptides from non-fat milk, human serum, and saliva. Further, the nanocomposite was applied to enrich phosphopeptides from a more complicated specimen, A549 cell lysate. A total of 890 phosphopeptides mapping to 564 phosphoproteins were successfully detected with nano LC-MS. SIGNIFICANCE: We successfully designed and developed an efficient analysis platform for phosphopeptides, which includes protein digestion, phosphopeptide enrichment, and MS detection. The MS-based enrichment platform was further used to analyze phosphopeptides from complicated bio-samples. This work paves the way for the design and preparation of graphite nitride-based IMAC materials for phosphoproteome analysis.

Cerium ions immobilized magnetic graphite nitride decorated with L-Alanyl-L-Glutamine as new chelator for enrichment of phosphopeptides.

Cerium ions immobilized magnetic graphite nitride material have been prepared using L-Alanyl-L-Glutamine as the new chelator. The resulting Fe3O4/g-C3N4-L-Ala-L-Gln-Ce4+, as an immobilized metal ion affinity chromatography (IMAC) sorbent, was reusable. This is due to the strong coordination interaction between L-Alanyl-L-Glutamine and cerium ions. After a series of characterizations, the magnetic nanocomposite showed high surface area, good hydrophilicity, positive electricity, and magnetic response. Fe3O4/g-C3N4-L-Ala-L-Gln-Ce4+ had high sensitivity (0.1 fmol), selectivity (α-/ß-casein/bovine serum albumin, 1:1:5000), and good recyclability (10 cycles). A total of 647 unique phosphopeptides mapped to 491 phosphoproteins were identified from A549 cell lysate by nano LC-MS analysis.

Removal of Hexamethyldisiloxane via a Novel Hydrophobic (3-Aminopropyl)Trimethoxysilane-Modified Activated Porous Carbon.

Volatile methyl siloxanes (VMS) must be removed because the formation of silica in the combustion process seriously affects the resource utilization of biogas. Herein, a series of APTMS ((3-aminopropyl)trimethoxysilane)-modified activated porous carbon (APC) adsorbents (named APTMS@APC) were prepared for VMS efficient removal. The as-prepared adsorbents were characterized using SEM, FTIR, Raman, X-ray diffraction analyses, and N2 adsorption/desorption. The results showed that the surface modification with APTMS enhanced the hydrophobicity of APC with the water contact angle increasing from 74.3° (hydrophilic) to 127.1° (hydrophobic), and meanwhile improved its texture properties with the SBET increasing from 981 to 1274 m2 g-1. The maximum breakthrough adsorption capacity of APTMS@APC for hexamethyldisiloxane (L2, model pollutant) was 360.1 mg g-1. Effects of an inlet L2 concentration (31.04-83.82 mg L-1) and a bed temperature (0-50 °C) on the removal of L2 were investigated. Meanwhile, after five adsorption-desorption cycles, the APTMS@APC demonstrated a superior cycling performance. This indicated that the hydrophobic APTMS@APC has a great significance to remove VMS.

Hexamethyldisiloxane Removal from Biogas Using a Fe3O4-Urea-Modified Three-Dimensional Graphene Aerogel.

Volatile methyl siloxanes (VMS), which are considered to be the most troublesome impurities in current biogas-cleaning technologies, need to be removed. In this study, we fabricated a series of Fe3O4-urea-modified reduced graphene-oxide aerogels (Fe3O4-urea-rGOAs) by using industrial-grade graphene oxide as the raw material. A fixed-bed dynamic adsorption setup was built, and the adsorption properties of the Fe3O4-urea-rGOAs for hexamethyldisiloxane (L2, as a VMS model pollutant) were studied. The properties of the as-prepared samples were investigated by employing various characterization techniques (SEM, TEM, FTIR, XRD, Raman spectroscopy, and N2 adsorption/desorption techniques). The results showed that the Fe3O4-urea-rGOA-0.4 had a high specific surface area (188 m2 g-1), large porous texture (0.77 cm3 g-1), and the theoretical maximum adsorption capacity for L2 (146.5 mg g-1). The adsorption capacity considerably increased with a decrease in the bed temperature of the adsorbents, as well as with an increase in the inlet concentration of L2. More importantly, the spent Fe3O4-urea-rGOA adsorbent could be readily regenerated and showed an excellent adsorption performance. Thus, the proposed Fe3O4-urea-rGOAs are promising adsorbents for removing the VMS in biogas.

A Study on the Non-Linear Impact of Digital Technology Innovation on Carbon Emissions in the Transportation Industry.

Transportation is an important part of social and economic development and is also a typical high-energy and high-emissions industry. Achieving low-carbon development in the transportation industry is a much-needed requirement and the only way to achieve high-quality development. Therefore, based on the relevant data of 30 provinces in China from 2010 to 2018, this research uses the static panel model, panel threshold model and spatial Durbin model to conduct an empirical study on the impact and mechanism of digital innovation on carbon emissions in the transportation industry, and draws the following conclusions. (1) Carbon emissions in the transportation industry have dynamic and continuous adjustment characteristics. (2) There is a significant inverted U-shape non-linear relationship between the level of digital innovation and carbon emissions in the industry. In regions with a low level of digital innovation, the application of digital technology increases carbon emissions in this industry, but as the level of digital innovation continues to increase its application suppresses carbon emissions, showing an effect of carbon emission reduction. (3) The impact of digital innovation on carbon emissions in the transportation industry has a spatial spillover effect, and its level in one province significantly impacts carbon emissions in other provinces' transportation industry through the spatial spillover effect. Therefore, it is recommended to further strengthen the exchange and cooperation of digital innovation in the transportation industry between regions, improve the scale of digitalization in this industry, and accelerate its green transformation through digital innovation, thus promoting the green, low-carbon, and sustainable development of China's economy.

Efficient Removal of Siloxane from Biogas by Using ß-Cyclodextrin-Modified Reduced Graphene Oxide Aerogels.

In this study, ß-cyclodextrin-modified reduced graphene oxide aerogels (ß-CD-rGOAs) were synthesized via a one-step hydrothermal method and were used to remove hexamethyldisiloxane (L2) from biogas. The ß-CD-rGOAs were characterized by the Brunner-Emmet-Teller technique, using Fourier-transform infrared spectroscopy, Raman spectrometry, scanning electron microscopy (SEM), contact angle measurements, and X-ray diffraction. The results of the characterizations indicate that ß-CD was grafted onto the surface of rGOAs as a cross-linking modifier. The ß-CD-rGOA had a three-dimensional, cross-linked porous structure. The maximum breakthrough adsorption capacity of L2 on ß-CD-rGOA at 273 K was 111.8 mg g-1. A low inlet concentration and bed temperature facilitated the adsorption of L2. Moreover, the ß-CD-rGOA was regenerated by annealing at 80 °C, which renders this a promising material for removing L2 from biogas.

Design of two-dimensional molybdenum trioxide-immobilized magnetic graphite nitride nanocomposites with multiple affinity sites for phosphopeptide enrichment.

Here, two-dimensional magnetic graphite nitride nanosheets were synthesized, over which molybdenum trioxide was distributed evenly. The magnetic nanocomposite served as an enrichment platform for phosphopeptides based on metal oxide affinity chromatography and anion-exchange chromatography. Owing to the abundant affinity sites, positive electricity, and large surface area, the nanocomposite had high selectivity (α-casein/ß-casein/bovine serum albumin, 1:1:5000), sensitivity (0.1 fmol), quantitative recovery (91.3%), and good recyclability (10 cycles). The nanocomposite also showed good enrichment performance for phosphopeptides from non-fat milk, human serum, saliva, and A549 cell lysate. The results demonstrated the value of this material in phosphorylated proteomics.

Layer-by-layer assembly of multilayered double hydroxides/polyoxometalate-coated magnetic nanoparticles for highly efficient phosphopeptide enrichment.

A layer-by-layer (LbL) assembly strategy was developed to prepare multilayered double hydroxide/polyoxometalate shell-coated magnetic nanoparticles. The introduction of functional shells not only offered abundant affinity sites of metal oxide and metal ions but also increased the surface area for the contact with targets. By combining the enrichment strategies of immobilized metal ion affinity chromatography and metal oxide affinity chromatography, the nanomaterial can capture phosphopeptides via a synergistic effect. The method presented a low detection limit of 0.1 fmol in combination with matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) analysis. The nanomaterial showed satisfactory selectivity (1:1:5000 M ratio of α-/ß-casein/bovine serum albumin), good recovery (92.07%), high adsorption capacity (117.6 mg g-1), and ten times reusability for capturing phosphopeptides.

Design of Gd3+-immobilized two-dimensional magnetic magadiite nanosheets for highly selective enrichment of phosphopeptides.

Exfoliated magadiite nanosheets embedded with Fe3O4 were constructed. Advantage was taken of the strong coordination between the silanol groups in magadiite nanosheets and the Gd3+ ion to prepare the final adsorbent, Gd3+-immobilized magnetic magadiite nanosheets. The adsorbent with two-dimensional (2D) morphology offered high surface area and abundant Gd3+ contents for phosphopeptides enrichment, on which Fe3O4 with positive electricity incorporated the magnetic properties. Combining with matrix assisted laser desorption ionization time of flight mass spectrometry (MALDI TOF-MS), the method showed low detection limit (0.05 fmol). The feasibility of using the 2D nanocomposite for phosphopeptides enrichment was demonstrated using mixtures of ß-casein and bovine serum albumin (1:5000). The standard deviation of captured phosphopeptides in three repeated experiments were in the range 0.15-0.42 (< 0.5% RSD). Further evaluation revealed that the nanocomposite was capable of enriching phosphopeptides from non-fat milk, human saliva, and serum. A novel Gd3+-immobilized two-dimensional magnetic magadiite nanosheets-based enrichment platform was designed. The developed material was employed as the adsorbent for the selective enrichment of phosphopeptides by coupling with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The material was successfully applied to enrich phosphopetides from standard peptide mixtures, nonfat milk, human saliva, and serum.

Modification of Threonine-825 of SlBRI1 Enlarges Cell Size to Enhance Fruit Yield by Regulating the Cooperation of BR-GA Signaling in Tomato.

Brassinosteroids (BRs) are growth-promoting phytohormones that can efficiently function by exogenous application at micromolar concentrations or by endogenous fine-tuning of BR-related gene expression, thus, precisely controlling BR signal strength is a key factor in exploring the agricultural potential of BRs. BRASSINOSTEROID INSENSITIVE1 (BRI1), a BR receptor, is the rate-limiting enzyme in BR signal transduction, and the phosphorylation of each phosphorylation site of SlBRI1 has a distinct effect on BR signal strength and botanic characteristics. We recently demonstrated that modifying the phosphorylation sites of tomato SlBRI1 could improve the agronomic traits of tomato to different extents; however, the associated agronomic potential of SlBRI1 phosphorylation sites in tomato has not been fully exploited. In this research, the biological functions of the phosphorylation site threonine-825 (Thr-825) of SlBRI1 in tomato were investigated. Phenotypic analysis showed that, compared with a tomato line harboring SlBRI1, transgenic tomato lines expressing SlBRI1 with a nonphosphorylated Thr-825 (T825A) exhibited a larger plant size due to a larger cell size and higher yield, including a greater plant height, thicker stems, longer internodal lengths, greater plant expansion, a heavier fruit weight, and larger fruits. Molecular analyses further indicated that the autophosphorylation level of SlBRI1, BR signaling, and gibberellic acid (GA) signaling were elevated when SlBRI1 was dephosphorylated at Thr-825. Taken together, the results demonstrated that dephosphorylation of Thr-825 can enhance the functions of SlBRI1 in BR signaling, which subsequently activates and cooperates with GA signaling to stimulate cell elongation and then leads to larger plants and higher yields per plant. These results also highlight the agricultural potential of SlBRI1 phosphorylation sites for breeding high-yielding tomato varieties through precise control of BR signaling.

Modification of Threonine-1050 of SlBRI1 regulates BR Signalling and increases fruit yield of tomato.

BACKGROUND: Appropriate brassinosteroid (BR) signal strength caused by exogenous application or endogenous regulation of BR-related genes can increase crop yield. However, precise control of BR signals is difficult and can cause unstable effects and failure to reach full potential. Phosphorylated BRASSINOSTEROID INSENSITIVE1 (BRI1), the rate-limiting receptor in BR signalling, transduces BR signals, and we recently demonstrated that modifying BRI1 phosphorylation sites alters BR signal strength and botanical characteristics in Arabidopsis. However, the functions of such phosphorylation sites in agronomic characteristics of crops remain unclear. RESULTS: In this work, we investigated the roles of tomato SlBRI1 threonine-1050 (Thr-1050). SlBRI1 mutant cu3-abs1 plants expressing SlBRI1 with a non-phosphorylatable Thr-1050 (T1050A), with a wild-type SlBRI1 transformant used as a control, were examined. The results showed enhanced autophosphorylation of SlBRI1 and BR signal strength for cu3-abs1 harbouring T1050A, which promoted yield through increased plant expansion, leaf area, fruit weight and fruit number per cluster but reduced nutrient contents, including ascorbic acid and soluble sugar levels. Moreover, plant height, stem diameter, and internodal distance were similar between the transgenic plants. CONCLUSION: Our results reveal the biological role of Thr-1050 in tomato and provide a molecular basis for establishing high-yield crops by precisely controlling BR signal strength via phosphorylation site modification.

Leaderless synchronization of coupled neural networks with the event-triggered mechanism.

This paper is concerned with leaderless synchronization of coupled delayed neural networks. A distributed event-triggered control strategy under the periodic sampling scheme is introduced to reduce control updates. By introducing a weighted average state as a virtual leader, the leaderless synchronization problem can be transformed to the stability problem of the error system, which is defined as the distance between each node and the virtual leader. A leaderless synchronization criterion under the periodic event-triggered scheme in strongly connected networks is first derived based on Finsler's lemma. The results are then extended to the network containing a directed spanning tree. A corollary with the lower dimension in the form of LMIs is further presented. Two examples are provided to validate the effectiveness of the theoretical results.

Enhancing Brassinosteroid Signaling via Overexpression of Tomato (Solanum lycopersicum) SlBRI1 Improves Major Agronomic Traits.

Brassinosteroids (BRs) play important roles in plant growth, development, and stress responses through the receptor, Brassinosteroid-insensitive 1 (BRI1), which perceives BRs and initiates BR signaling. There is considerable potential agricultural value in regulating BR signaling in crops. In this study, we investigated the effects of overexpressing the tomato (Solanum lycopersicum) BRI1 gene, SlBRI1, on major agronomic traits, such as seed germination, vegetative growth, fruit ethylene production, carotenoid accumulation, yield, and quality attributes. SlBRI1 overexpression enhanced the endogenous BR signaling intensity thereby increasing the seed germination rate, lateral root number, hypocotyl length, CO2 assimilation, plant height, and flower size. The transgenic plants also showed an increase in fruit yield and fruit number per plant, although the mean weight of individual fruit was reduced, compared with wild type. SlBRI1 overexpression also promoted fruit ripening and ethylene production, and caused an increase in levels of carotenoids, ascorbic acid, soluble solids, and soluble sugars during fruit ripening. An increased BR signaling intensity mediated by SlBRI1 overexpression was therefore positively correlated with carotenoid accumulation and fruit nutritional quality. Our results indicate that enhancing BR signaling by overexpression of SlBRI1 in tomato has the potential to improve multiple major agronomic traits.