Femtosecond laser-assisted corneal transplantation with a low-energy, liquid-interface system.

Femtosecond laser-assisted keratoplasty has been proposed as a treatment option for corneal transplantation. In this study, we investigated and compared the outcomes of Ziemer Z8 femtosecond laser (FSL)-assisted penetrating keratoplasty (PK) using a liquid interface versus flat interface. Thirty fresh porcine eyes underwent FSL-assisted PK with the Z8 using different levels of energies (30%, 90% or 150%) and different interfaces (liquid or flat). The real-time intraocular pressure (IOP) changes, incision geometry, corneal endothelial damage, as well as the accuracy of laser cutting and tissue reaction, were performed and compared. We found that the overall average IOP at all laser trephination stages was significantly higher with the flat interface, regardless of the energy used (68.9 ± 15.0 mmHg versus 46.1 ± 16.6 mmHg; P < 0.001). The overall mean laser-cut angle was 86.2º ± 6.5º and 88.2º ± 1.0º, for the liquid and flat platform respectively, indicating minimal deviation from the programmed angle of 90º. When high energy (150%) was used, the endothelial denuded area was significantly greater with the flat interface than with liquid interface (386.1 ± 53.6 mm2 versus 139.0 ± 10.4 mm2 P = 0.02). The FSL cutting did not cause obvious tissue reaction alongside the laser cut on histological evaluation. The results indicated a liquid interface is the preferable choice in FSL-assisted corneal transplantation.

Effect of peripheral iridectomy on VEGF-A and TGF-ß levels in rabbit aqueous humour.

BACKGROUND: Peripheral iridectomy (PI), routinely performed during glaucoma filtration surgery, may contribute to scarring. This study aims to determine whether PI alters the concentrations of VEGF-A and TGF-ß isoforms in the rabbit aqueous humour. METHODS: Anterior chamber paracentesis (ACP) was performed in both eyes of six New Zealand white rabbits, with additional surgical PI performed in the right eyes. Eyes were examined on postoperative days (PODs) 1, 7, 30 and 60 by means of the tonopen, slit-lamp biomicroscopy, and bead-based cytokine assays for TGF-ß and VEGF-A concentrations in the aqueous humor. RESULTS: ACP caused a significant reduction in intraocular pressure (IOP) from mean preoperative 11.47 ± 1.01 mmHg to 5.67 ± 1.63 mmHg on POD 1 while PI did not cause further IOP reduction. Limbal conjunctival vasculature appeared slightly increased on POD 1 in both ACP and PI eyes with PI also causing mild bleeding from damaged iris vessels. Two PI eyes developed fibrinous anterior chamber reaction and/ or peripheral anterior synechiae. Aqueous VEGF-A levels were not significantly different between eyes treated with ACP and PI. Aqueous TGF-ß concentrations distributed in the ratio of 4:800:1 for TGF-ß1:TGF-ß2:TGF-ß3 respectively. While aqueous TGF-ß2 was not significantly induced by either procedure at any time point, TGF-ß1 and TGF-ß3 were significantly induced above baseline levels by PI on POD 1. CONCLUSION: PI increases the risk of inflammation. The combined induction of aqueous TGF-ß1 and TGF-ß3 by PI in glaucoma surgery may impact surgery success in glaucoma subtypes sensitive to these isoforms.

Evaluation of femtosecond laser-assisted anterior capsulotomy in the presence of ophthalmic viscoelastic devices (OVDs).

The introduction of femtosecond laser-assisted cataract surgery is an alternative approach to conventional cataract surgery. Our study aimed to determine the effectiveness of femtosecond laser-assisted capsulotomy in the presence of different ophthalmic viscoelastic devices (OVDs) in the anterior chamber. Fresh porcine eyes (n = 96) underwent LDV Z8-assisted anterior capsulotomy, either in the presence of an OVD (Viscoat, Provisc, Healon, Healon GV or HPMC) or without, using 90% and 150% energies respectively. Following that, the capsule circularity, tag's arc-length, tag-length, tag-area and rupture strength (mN) of the residual capsular bag were evaluated. We found that increasing energy from 90 to 150% across the OVD sub-groups improved the studied capsulotomy parameters. Amongst the 90% energy sub-groups, the circularity and tag-parameters were worse with Viscoat and Healon GV, which have higher refractive index and viscosity compared to the aqueous humour. Using 150% energy, Healon GV showed a significantly worse total arc-length (p = 0.01), total tag-length (p = 0.03) and total tag-area (p = 0.05) compared to the control group. We concluded that; an OVD with a refractive index similar to aqueous humour and lower viscosity, such as Healon or Provisc, as well as a higher energy setting, are recommended, to enhance the efficacy of laser capsulotomy.

Surface modification of corneal prosthesis with nano-hydroxyapatite to enhance in vivo biointegration.

The majority of clinical corneal prostheses (KPros) adopt a core-skirt configuration. This configuration is favored owing to the optic core (generally a cylindrical, acrylic-based material, such as PMMA), that not only provides a clear window for the patients' vision, but also confers resistance to biodegradability. The surrounding skirt (typically a biological material, such as corneal tissue) allows for host tissue integration. However, due to poor biointegration between the dissimilar core and skirt materials, it results in a weak adhesion at the interface, giving rise to clinical complications, such as bacterial infections in the tissue-PMMA interface and device extrusion. Here, we physically immobilized nano-hydroxyapatite (nHAp) on a PMMA cylinder via a dip-coating technique, to create a bioactive surface that improved biointegration in vivo. We established that the nHAp coating was safe and stable in the rabbit cornea over five weeks. More importantly, we found that apoptotic, wound healing and inflammatory responses to nHAp-coated PMMA were substantially milder than to non-coated PMMA. More mature collagen, similar to the non-operated cornea, was maintained in the corneal stroma adjacent to the nHAp-coated implant edge. However, around the non-coated cylinder, an abundant new and loose connective tissue formed, similar to bone tissue response to bioinert scaffolds. As a result of superior biointegration, tissue adhesion with nHAp-coated PMMA cylinders was also significantly enhanced compared to non-coated cylinders. This study set a precedent for the future application of the nHAp coating on clinical KPros. STATEMENT OF SIGNIFICANCE: Currently, all clinical corneal prostheses utilize as-manufactured, non-surface modified PMMA optic cylinder. The bioinert cylinder, however, has poor biointegration and adhesion with the surrounding biological tissue, which can give rise to postoperative complications, such as microbial invasion in the tissue-PMMA loose interface and PMMA optic cylinder extrusion. In the current study, we showed that surface modification of the PMMA cylinder with bioactive nano-hydroxyapatite (nHAp) significantly enhanced its biointegration with corneal stromal tissue in vivo. The superior biointegration of the nHAp-coated PMMA was signified by a more attenuated corneal wound healing, inflammatory and fibrotic response, and better tissue apposition, as well as a significantly improved corneal stromal tissue adhesion when compared to the non-coated PMMA.

Optical Coherence Tomography Angiography Imaging to monitor Anti-VEGF treatment of Corneal Vascularization in a Rabbit Model.

Optical coherence tomography angiography (OCTA) is a well-established non-invasive retinal vascular imaging technique. It has been recently adapted to image the anterior segment and has shown good potential to image corneal vascularisation. The purpose of the study is to evaluate the usefulness of OCTA to monitor regression of corneal vessels following anti-VEGF (vascular endothelial growth factor) treatment using a previously established corneal vascularisation rabbit model. The regression of vessels following the treatment with aflibercept and ranibizumab anti-VEGFs using both topical instillation and sub-conjunctival injection was quantified using OCTA and compared with ICGA (indocyanine green angiography). Overall vessel density measurements using OCTA showed good correlation (r = 0.988, p < 0.001) with ICGA, with no significant difference between the two treatment groups (p = 0.795). It was also shown that OCTA provided good repeatability outcomes of the quantitative measurements. Using Bland-Altman plots, vessel growth density values between anti-VEGF treatments were compared to control saline group. It was observed that aflibercept provided longer lasting effect than ranibizumab. We also observed that in both drugs, the topical route of administration topical provided longer regression outcomes compared to one-time sub-conjunctival injection. Thereby, with this pilot study, it was demonstrated that OCTA is a reliable imaging technique to follow-up and monitor corneal vascularisation and its treatment quantitatively.

Correction to: Vessel density and En-face segmentation of optical coherence tomography angiography to analyse corneal vascularisation in an animal model.

[This corrects the article DOI: 10.1186/s40662-018-0128-8.].

Vessel density and En-face segmentation of optical coherence tomography angiography to analyse corneal vascularisation in an animal model.

Background: Optical coherence tomography angiography (OCTA) is a novel non-invasive angiography technology that has recently been extensively studied for its utility in anterior segment imaging. In this study, we compared a split-spectrum amplitude decorrelation angiography (SSADA) OCTA and an Complex OCT signal difference angiography [corrected] (CODAA SD) [corrected] OCTA system to current angiographic technique, indocyanine green angiography (ICGA), to assess corneal vascularisation in an animal model. Methods: We imaged 16 rabbits, (one eye per animal) with corneal vascularisation using SSADA OCTA (AngioVue; Optovue Inc., USA), CODAA OCTA [corrected] (Angioscan; RS-3000 Nidek Co. Ltd., Japan) and ICGA in the same region of interest of the cornea at successive time-points. We then analysed all scanned images for vessel density measurements and used paired t-tests and Bland-Altman plots to examine for significant differences. The en-face segmentation images from each of the OCTA scans were also extracted and were matched at every 50 µm segmentation to be compared for vessel density at the respective depths. Results: Bland-Altman plots revealed a good agreement between all three imaging techniques (P > 0.05) for all vessel density measurements computed, and the ranges of 95% limit of agreement were acceptable from a clinical perspective. No significant difference was reported, with ICGA (µ = 16.52 ± 8.94%) being more comparable to the CODAA [corrected] OCTA (µ = 16.23 ± 9.51%; p = 0.50) than the SSADA OCTA (µ = 17.09 ± 7.34%; p = 0.33) system. Also, a good correlation value (r > 0.9) was obtained when comparing the vessel density measurements of the en-face segmentations between the OCTA systems. Conclusions: Comparable vessel density quantification between the two OCTA systems, and with ICGA was obtained. Segmentation analysis of the vasculature at different depths showed varied performance in the two OCTA systems relative to each other. The implications of the study may help to aid in the development of better OCTA algorithms for the anterior segment and its use in clinical translational research.

Comparison of Optical Coherence Tomography Angiography to Indocyanine Green Angiography and Slit Lamp Photography for Corneal Vascularization in an Animal Model.

Corneal neovascularization (CoNV) could be treated by novel anti-angiogenic therapies, though reliable and objective imaging tools to evaluate corneal vasculature and treatment efficacy is still lacking. Optical coherence tomography angiography (OCTA) -currently designed as a retinal vascular imaging system- has been recently adapted for anterior-segment and showed good potential for successful imaging of CoNV. However, further development requires an animal model where parameters can be studied more carefully with histological comparison. Our study evaluated the OCTA in suture-induced CoNV in a rabbit model compared to indocyanine green angiography (ICGA) and slit-lamp photography (SLP). Overall vessel density measurements from OCTA showed good correlation with ICGA (0.957) and SLP (0.992). Vessels density by OCTA was higher than ICGA and SLP (mean = 20.77 ± 9.8%, 15.71 ± 6.28% and 17.55 ± 8.36%, respectively, P < 0.05). OCTA was able to depict CoNV similarly to SLP and ICGA, though it could better detect small vessels. Moreover, the depth and growth of vessels could be assessed using en-face and serial-scans. This study validated the OCTA in a rabbit model as a useful imaging tool for translational studies on CoNV. This may contribute to further studies on OCTA for anterior-segment including serial evaluation of emerging anti-angiogenic therapies.

Retreatment strategies following Small Incision Lenticule Extraction (SMILE): In vivo tissue responses.

With any refractive correction, including Small Incision Lenticule Extraction (SMILE), there may be a residual refractive error that requires a retreatment. Here, we investigated the tissue responses following various retreatment procedures in a rabbit model of SMILE. All rabbits underwent a -6.00D correction with SMILE. Two weeks later, they underwent -1.00D enhancement by: (i) VisuMax Circle, followed by excimer ablation (S+C); (ii) secondary SMILE anterior to the primary procedure (S+SE); or (iii) surface ablation (S+P), and were examined for 28 days. S+P induced corneal edema and haze, and more CD11b- (23±6 cells) and TUNEL-positive (36±4 cells) cells in the central stromal superficial layers early post-operatively (p<0.001 compared to other procedures). The corneas appeared normal on day 28 after S+P, but had a lower number of keratocytes near the laser ablated plane compared to other procedures. S+SE and S+C did not induce corneal haze and resulted similar level of fibronectin. However, S+C resulted in more inflammatory (10±2 cells; p = 0.001) and apoptotic cells (25±2 cells; p<0.001) compared to S+SE (7±1 inflammatory cells and 21±3 apoptotic cells) early post-operatively. In conclusion, each SMILE retreatment method resulted in unique tissue responses. S+SE offers advantages, such as minimal inflammation and cell death, as well as maintaining a 'flap-less' surgery, over other procedures. However, depending on the degree of enhancement, the lenticule may become too thin to be extracted and the procedure becomes more difficult to perform than S+C and S+P. S+P can maintain corneal integrity by avoiding flap creation and is technically more simple to perform than the others, but the surgery needs to be supplemented with mitomycin-C in order to reduce inflammation and modulate better wound healing.

A Rabbit Model Study to Determine the Efficacy of a Prototype Corneal Endothelium Protector during Cataract Surgery.

Purpose. We evaluated the efficacy and safety of a mechanical device, the P-chute, in corneal endothelium preservation during phacoemulsification in a rabbit model. Methods. Twenty-four rabbits were randomly assigned into 2 groups. One eye of each rabbit underwent phacoemulsification that simulated the removal of a dense nucleus, with or without the P-chute. Serial slit-lamp examinations, anterior segment optical coherence tomography (ASOCT) scans, and specular microscopy were performed. Three rabbits from each group were sacrificed on postoperative days (PODs) 1, 5, 7, and 14. Histological analysis of the corneas was performed. Results. There was a trend towards lesser endothelial cell loss for the P-chute group at POD1 (4.9% versus 12.5%, p = 0.53), POD5 (10.4% versus 12.2%, p = 0.77), and POD7 (10.5% versus 17.2%, p = 0.52). There was no significant difference in the corneal thickness (p = >0.05) between the 2 groups. The insertion of the device was challenging. The use of the P-chute only added an extra 15% to the surgical time. Conclusions. There was a trend towards better endothelium preservation with the P-chute even though the results were not statistically significant. We believe that the device could be useful in certain surgical situations. Further work is needed to improve the device insertion.

Repeatability and Reproducibility of Corneal Biometric Measurements Using the Visante Omni and a Rabbit Experimental Model of Post-Surgical Corneal Ectasia.

PURPOSE: To investigate the repeatability and reproducibility of the Visante Omni topography in obtaining topography measurements of rabbit corneas and to develop a post-surgical model of corneal ectasia. METHODS: Eight rabbits were used to study the repeatability and reproducibility by assessing the intra- and interobserver bias and limits of agreement. Another nine rabbits underwent different diopters (D) of laser in situ keratosmileusis (LASIK) were used for the development of ectasia model. All eyes were examined with the Visante Omni, and corneal ultrastructure were evaluated with transmission electron microscopy (TEM). RESULTS: There was no significant intra- or interobserver difference for mean steep and flat keratometry (K) values of simulated K, anterior, and posterior elevation measurements. Eyes underwent -5 D LASIK had a significant increase in mean amplitude of astigmatism and posterior surface elevation with time (P for trend < 0.05). At 2 and 3 months, the -5 D LASIK group had significant greater mean amplitude of astigmatism (P = 0.036; P = 0.027) and posterior surface elevation (both P < 0.005) compared with control group. On TEM, the mean collagen fibril diameter and interfibril distance in the -5 D LASIK eyes were significantly greater than in controls at 3 months (P = 0.018; P < 0.001). CONCLUSIONS: The Visante Omni provided imaging of the rabbit cornea with good repeatability and reproducibility. Application of -5 D LASIK treatment produced a rabbit model of corneal ectasia that was gradual in development and simulated the human condition. TRANSLATIONAL RELEVANCE: The results provide the foundations for the future evaluation of novel treatment modalities for post-surgical ectasia and keratoconus.

Collagen-Based Artificial Corneal Scaffold with Anti-Infective Capability for Prevention of Perioperative Bacterial Infections.

Bacterial infection following implantation of an artificial corneal scaffold is a serious complication. Conventional antibiotic prophylaxis, which includes topical vancomycin application, is limited by low bioavailability, high dosing requirement, and poor patient compliance. The ideal option to overcome these issues is an antibiotic-eluting corneal prosthesis that sustains the local release of drug. In this study, we incorporated vancomycin in thick 15% collagen hydrogels to create an artificial corneal scaffold with anti-infective capability. The incorporation of vancomycin did not significantly alter the Young's modulus, transparency and refractive index of the vancomycin-loaded hydrogel (VH), which were 0.79 ± 0.04 MPa (p = 0.233 compared to blank hydrogel), 94.3 ± 2.3% (p = 0.115) and 1.346 ± 0.005 (p = 0.264), respectively. In vitro, the drug elution was sustained for up to 7 days. The VH was subsequently implanted intrastromally in rabbit corneas, replacing stromal tissue that was removed following femtosecond laser-assisted small incision lenticule extraction procedure. In vivo, the vancomcyin could be detected in the aqueous humor for up to 10 days. We then created a corneal infectious keratitis model by intrastromal injection of 1 × 108 CFU/ml of Staphylococcus aureus inoculate on day 2 postimplantation. On day 3 postinfection, the VH-implanted corneas were clear and nonedematous and showed a substantial reduction of log 2.5 in S. aureus compared to the blank hydrogel-implanted corneas, which appeared hazy, edematous, and had excessive inflammation. Immunohistochemistry of inflammatory marker, CD18, demonstrated a significant reduction in inflammatory cells in VH-implanted corneas (49 ± 9 cells/unit area) compared to blank hydrogel-implanted corneas (523 ± 15 cells/unit area) (p < 0.001). In conclusion, we have demonstrated the efficacy of a drug-eluting corneal implant in preventing perioperative bacterial infections.

Comparative study of nJ- and µJ-energy level femtosecond lasers: evaluation of flap adhesion strength, stromal bed quality, and tissue responses.

PURPOSE: To compare flap adhesion strength, stromal bed quality, and tissue responses after flap preparation using nJ- and µJ-energy level femtosecond lasers. METHODS: All corneal flaps were created by either VisuMax laser (µJ-energy level) or femto-LDV (nJ-energy level). Flap adhesion strength in the rabbits was measured with a tension meter 1 and 2 months postoperatively. To investigate tissue responses to laser delivery, immunofluorescence staining and TUNEL assay were performed 4 and 24 hours postoperatively. To assess flap bed smoothness, human donor corneas were used. Surface irregularities were graded based on scanning electron microscopy results. RESULTS: The flap adhesion strength in the VisuMax group at month 1 and 2 was 16.95 ± 1.45 kPa and 18.33 ± 1.81 kPa, respectively; and 12.31 ± 4.15 kPa and 13.85 ± 4.78 kPa in the LDV group, respectively. No significant difference was found between the groups. Fibronectin and apoptotic cells were largely absent at the central incision site in the LDV group, but were present in the VisuMax group. The smoothness of flap beds appeared similar for both groups. An observer scored the VisuMax group 8.00 ± 1.00 and the LDV group 7.33 ± 0.58 (P = 0.387). CONCLUSIONS: The flap adhesion strength increased over time after treatment with both lasers. The nJ-energy pulses produced minimal wound healing reaction and apoptotic cells along the incision plane. The application of an nJ-energy laser, which can incise the cornea without inducing significant damage to cells and wound healing reaction, offers great potential at reducing scarring following incisional laser stromal surgery.

Early corneal nerve damage and recovery following small incision lenticule extraction (SMILE) and laser in situ keratomileusis (LASIK).

PURPOSE: We compared early corneal nerve changes after small incision lenticule extraction (SMILE) and laser in situ keratomileusis (LASIK). METHODS: A total of 12 rabbits underwent LASIK in one eye and SMILE in the fellow eye. Baseline and follow-up evaluations at 1, 2, and 4 weeks postoperatively were performed with in vivo confocal microscopy to evaluate 5 different areas within the treated zone: center, superior, inferior, nasal, and temporal. Cryosections of the corneas and whole mount of the extracted SMILE lenticules were analyzed with immunostaining of ßIII-tubulin. RESULTS: One week after SMILE and LASIK, a decrease in nerve length and density was observed in all evaluated areas. A trend toward greater subbasal nerve length and density (SLD), more eyes with subbasal nerves (ESN), more eyes with subbasal nerves longer than 200 µm (SNL), and higher mean number of subbasal nerves by frame (NSN) in SMILE than in LASIK groups was observed at subsequent follow-up time points. Only the SMILE group showed a recovery of SLD, ESN, and NSN by week 4 (P > 0.05). A trend toward more eyes with sprouting subbasal nerves and greater mean number of sprouting nerves was observed in LASIK than in SMILE, indicating that more subbasal nerves were disrupted and undergoing regeneration after LASIK. Immunostaining at postoperative week 4 revealed a faster stromal nerve recovery in post-SMILE eyes compared to post-LASIK eyes. CONCLUSIONS: Our findings suggest that SMILE results in less nerve damage and faster nerve recovery than LASIK.

LASIK following small incision lenticule extraction (SMILE) lenticule re-implantation: a feasibility study of a novel method for treatment of presbyopia.

Presbyopia remains a major visual impairment for patients, who have previously undergone laser refractive correction and enjoyed unaided distance vision prior to the onset of presbyopia. Corneal stromal volume restoration through small incision lenticule extraction (SMILE) lenticule re-implantation presents an opportunity for restoring the patients' non-dominant eye to previous low myopia to achieve a monovision. In this study, we investigated the feasibility of performing LASIK after lenticule re-implantation as a method to create presbyopic monovision. A -6.00D SMILE correction was performed in 9 rabbit eyes. The lenticules were cryopreserved for 14 days and re-implanted. Five weeks later, 3 of these eyes underwent LASIK for -5.00D correction (RL group); 3 underwent LASIK flap creation, which was not lifted (RN); and no further procedures were performed on the remaining 3 eyes. These groups were compared with 3 eyes that underwent standard LASIK for a -5.00D correction (LO); 3 that underwent creation of non-lifted flap (LN); and 3 non-operated eyes. Rabbits were euthanized 1 day post-surgery. Tissue responses were analyzed by immunohistochemistry, slit lamp and in vivo confocal microscopy (IVCM). Intrastromal irregularities and elevated reflectivity levels of the excimer-ablated plane were observed on slit lamp and IVCM, respectively in the RL group. The results were comparable (P = 0.310) to IVCM findings in the LO group. RL and LO groups showed similar fibronectin expression levels, number of CD11b-positive cells (P = 0.304) and apoptotic cells (P = 0.198). There was no difference between the RN and LN groups in reflectivity levels (P = 0.627), fibronectin expression levels, CD11b-positive cells (P = 0.135) and apoptotic cells (P = 0.128). LASIK can be performed following lenticule re-implantation to create presbyopic monovision. The tissue responses elicited after performing LASIK on corneas that have undergone SMILE and subsequent lenticule re-implantation are similar to primary procedure.

Comparison of four different VisuMax circle patterns for flap creation after small incision lenticule extraction.

PURPOSE: To compare four different Circle patterns for flap creation after small incision lenticule extraction (SMILE). METHODS: SMILE was performed on six rabbits. Twenty-eight days after the initial procedure, corneal flaps were created using Circle patterns. Rabbits were divided into four groups (patterns A, B, C, and D). Pattern A creates a circular side cut to meet the cap cut within the clearance zone (outside of the optical zone). Patterns B, C, and D create a lamellar ring posterior, anterior, and at the same depth, respectively, to the cap to meet the cap cut in the clearance zone with the help of a junction cut. Difficulty of flap lift was graded from 1 (easiest) to 5 (most difficult). The bed quality was assessed by scanning electron microscopy. RESULTS: Flaps created by patterns A and D were the easiest to lift (grade 2). The resulting flap bed was smooth and undisrupted. However, pattern A resulted in a reduced re-treatment area. Flaps created by pattern B were the most difficult to lift (grade 4). The stromal dissection was difficult in an attempt to ascertain the original optical zone from the lamellar ring, placed posterior. Flaps produced by pattern C were easy to lift, with minor intrastromal resistance experienced during the lifting process (grade 3). The transition between the lamellar ring and cap cut was hardly discernible in pattern C-treated corneas. CONCLUSIONS: Pattern D, a lamellar ring adjacent to the cap cut, was the most optimal to be used for flap creation in cases of SMILE re-treatment.