Chemical compositions of Eucalyptus sp. Essential oils and the evaluation of their combinations as a promising treatment against ear bacterial infections.

BACKGROUND: The chemical composition and biological activities of Eucalyptus essential oils (EOs) have been documented in numerous studies against multiple infectious diseases. The antibacterial activity of individual Eucalyptus EOs against strains that cause ear infections was investigated in our previous study. The study's antibacterial activity was promising, which prompted us to explore this activity further with EO blends. METHODS: We tested 15 combinations (9 binary combinations and 6 combinations of binary combinations) of Eucalyptus EOs extracted by hydrodistillation from eight Tunisian Eucalyptus species dried leaves against six bacterial strains responsible for ear infections: three bacterial isolates (Haemophilus influenzae, Haemophilus parainfluenzae, and Klebsiella pneumoniae) and three reference bacteria strains (Pseudomonas aeruginosa, ATTC 9027; Staphylococcus aureus, ATCC 6538; and Escherichia coli, ATCC 8739). The EOs were analyzed using GC/FID and GC/MS. The major compounds, as well as all values obtained from the bacterial growth inhibition assay, were utilized for statistical analysis. RESULTS: The antibacterial activity of the EO blends exhibited significant variation within Eucalyptus species, bacterial strains, and the applied methods. Principal component analysis (PCA) and hierarchical cluster analysis (HCA), based on the diameters of the inhibition zone, facilitated the identification of two major groups and ten subgroups based on the level of antibacterial activity. The highest antibacterial activity was observed for the mixture of EOs extracted from E. panctata, E. accedens, and E. cladoclayx (paac) as well as E. panctata, E. wandoo, E. accedens, and E. cladoclayx (pwac) using the disc diffusion method. Additionally, significant activity was noted with EOs extracted from E. panctata, E. wandoo (pw) and E. panctata, E. accedens (pa) using the broth microdilution method. CONCLUSION: Our findings suggest that certain EO combinations (paac, pwac, pw, and pa) could be considered as potential alternative treatment for ear infections due to their demonstrated highly promising antibacterial activities.

Physicochemical modelling of the retention mechanism of temperature-responsive polymeric columns for HPLC through machine learning algorithms.

Temperature-responsive liquid chromatography (TRLC) offers a promising alternative to reversed-phase liquid chromatography (RPLC) for environmentally friendly analytical techniques by utilizing pure water as a mobile phase, eliminating the need for harmful organic solvents. TRLC columns, packed with temperature-responsive polymers coupled to silica particles, exhibit a unique retention mechanism influenced by temperature-induced polymer hydration. An investigation of the physicochemical parameters driving separation at high and low temperatures is crucial for better column manufacturing and selectivity control. Assessment of predictability using a dataset of 139 molecules analyzed at different temperatures elucidated the molecular descriptors (MDs) relevant to retention mechanisms. Linear regression, support vector regression (SVR), and tree-based ensemble models were evaluated, with no standout performer. The precision, accuracy, and robustness of models were validated through metrics, such as r and mean absolute error (MAE), and statistical analysis. At 45 ∘ C , logP predominantly influenced retention, akin to reversed-phase columns, while at 5 ∘ C , complex interactions with lipophilic and negative MDs, along with specific functional groups, dictated retention. These findings provide deeper insights into TRLC mechanisms, facilitating method development and maximizing column potential.

Multidimensional LC-MS with 1D multi-method option and parallel middle-up and bottom-up MS acquisition for in-depth characterization of antibodies.

Monoclonal antibodies (mAbs) are large and highly heterogeneous species typically characterized using a plethora of analytical methodologies. There is a trend within the biopharmaceutical industry to combine several of these methods in one analytical platform to simultaneously assess multiple structural attributes. Here, a protein analyzer for the fully automated middle-up and bottom-up liquid chromatography-mass spectrometry (LC-MS) analysis of charge, size and hydrophobic variants is described. The multidimensional set-up combines a multi-method option in the first dimension (1D) (choice between size exclusion - SEC, cation exchange - CEX or hydrophobic interaction chromatography - HIC) with second dimension (2D) on-column reversed-phase (RPLC) based desalting, denaturation and reduction prior to middle-up LC-MS analysis of collected 1D peaks and parallel on-column trypsin digestion of denatured and reduced peaks in the third dimension (3D) followed by bottom-up LC-MS analysis in the fourth dimension (4D). The versatile and comprehensive workflow is applied to the characterization of charge, hydrophobic and size heterogeneities associated with an engineered Fc fragment and is complemented with hydrogen-deuterium exchange (HDX) MS and FcRn affinity chromatography - native MS to explain observations in a structural/functional context.

Temperature-responsive comprehensive two-dimensional liquid chromatography coupled to high resolution mass spectrometry for the elucidation of the oxidative degradation processes of chemicals of environmental concern.

This study explores the possibilities offered by temperature-responsive liquid chromatography (TRLC) based comprehensive 2-dimensional liquid chromatography in combination with reversed-phase liquid chromatography (RPLC) for the analysis of degradation products formed upon oxidative treatment of persistent organic pollutants, in this case exemplified through carbamazepine (CBZ). The TRLC×RPLC combination offers the possibility to overcome peak overlap and incomplete separation encountered in 1D approaches, while the transfer of the purely aqueous mobile phase leads to refocusing of all analytes on the second dimension column. Consequently, this allows for about method-development free and hence, easier LC×LC. The study focuses on the oxidative degradation of CBZ, a compound of environmental concern due to its persistence in water bodies. The TRLC×RPLC combination effectively separates and identifies CBZ and its degradation products, while offering improved selectivity over the individual TRLC or RPLC separations. This allows gathering more understanding of the degradation cascade and allows real-time monitoring of the appearance and disappearance of various degradation products. The compatibility with high-resolution mass spectrometry is last shown, enabling identification of 21 CBZ-related products, nine of which were not previously reported in CBZ degradation studies. The approach's simplicity, optimization-free aspects, and ease of use make it a promising tool for the analysis of degradation pathways in environmental contaminants.

Into the toxicity potential of an array of parabens by biomimetic liquid chromatography, cell viability assessments and in silico predictions.

Five parabens (PBs) i.e., Methylparaben (MP), Ethylparaben (EP), Isopropylparaben (iPrP), Isobutylparaben (iBuP), Benzylparaben (BzP), and their parent compound i.e., para-hydroxy Benzoic Acid (pHBA), were studied both in vitro and in silico. Specifically, we determined their retention on several both protein- (Human Serum Albumin and α1-acidic glycoprotein) and (phospho) lipid- (immobilized artificial membrane (IAM)) based biomimetic stationary phases to evaluate their penetration potential through the biomembranes and their possible distribution in the body. The IAM phases were based either on phosphatidylcholine (PC) analogues i.e., PC.MG and PC.DD2 or on sphingomyelin (SPH). We also assessed their viability effect on breast cancer cells (MCF-7) via MTT assay subjecting the cells to five different PB concentrations i.e., 100 µM, 10 µM, 1 µM, 0.1 µM and 0.01 µM. Finally, their pharmacokinetics and toxicity were assessed by the ADMET Predictor™ software. Isopropylparaben was found to be more active than 17ß estradiol (E2) employed as positive control, on the screened cell line inducing cell proliferation up to 150 % more of untreated cells. Other analogues showed only a slight/moderate cell proliferation activity, with parabens having longer/branched side chain showing, on average, a higher proliferation rate. Significant linear direct relationships (for PC.DD2 r2 = 0.89, q2 = 0.86, for SPH r2 = 0.89, q2 = 0.85, for both P value < 0.05) were observed between the difference in proliferative effect between the readout and the control at 0.01 µM concentration and the retention on the IAM phases measured at pH 5.0 for all compounds but pHBA, which is the only analyte of the dataset supporting a carboxylic acid moiety. IAM affinity data measured at pH 7.0 were found to be related to the effective human jejunal permeability as predicted by the software ADMET® Predictor, which is relevant when PBs are added to pharmaceutical and food commodities.

On-column modification for the creation of temperature-responsive stationary phases.

Temperature-responsive liquid chromatography (TRLC) offers an alternative for retention and selectivity optimisation in HPLC. This approach thereby exploits temperature gradients on stimuli-responsive stationary phases and forfeits the necessity for solvent gradients, allowing analyses to be performed using aqueous mobile phases. Consequently, it can be employed as a green alternative to reversed-phase separations. However, current production to obtain temperature-responsive columns inherently require dedicated column packing processes with polymer-modified particles. To facilitate the development of temperature-responsive phases, a flow-through modification procedure was developed allowing on-column modification of aminopropyl silica columns. Three columns were manufactured using this novel flow-through approach, which achieved identical column efficiencies compared to existing TRLC column. Demonstrating the possibility of bypassing the dedicated packing processes without losing efficiency. Additionally, it was observed that flow-through produced columns yielded higher retention at elevated temperatures despite their reduced carbon load. Further investigation of the carbon load revealed the presence of stationary phase gradients, whose influence was studied via novel developed retention experiments, which revealed a negligible change reduction in retention upon a change of polymer modification from 19.8% to 14.5%. However, further decrease from 14.5% to 12.3% resulted in a larger change. Interestingly, a further enhancement in apparent plate numbers was observed when operating the column under a reversed flow, yielding an increasing stationary phase gradient. This on-column modification procedure demonstrates the potential for modification of existing (commercial) packed columns to achieve temperature-responsive phases without loss of efficiency or retention. Thus, not only facilitating accessibility to temperature-responsive phases, but also aiding with development of further generations of temperature-responsive phases by removing the need for packing optimisation. Additionally, a novel experiment was set up to easily investigate the effect of inhomogeneous stationary phases retention.

High-throughput and reliable assessments of the ionization constant of monoprotic organic acids through an arginine based mixed mode HPLC.

The charge state of a molecule is the single most prominent attribute ruling out its interactions with the surrounding environment. In a previous study, the retention of acids on the new Celeris™ Arginine (ARG) column was found to be predominantly driven by electrostatics and, specifically, their charge state. Therefore, we analysed 41 compounds in liquid chromatography with ultraviolet detection to study possible relationships between the analytical retention on this phase and the pKa of the acidic solutes. Highly significant relationships were observed indicating either a linear (r2 = 0.86) or a quadratic (r2= 0.89) trend. To improve the throughput of the method, this was transferred to LC mass spectrometry, allowing the analysis of a molecule every 3 mins. The developed method was found to be fast, reliable, accurate, easily automatable and simple to set up. Finally, the analytical column's being industrially manufactured and commercially available offers broad applicability.

Facilitating structural elucidation of small environmental solutes in RPLC-HRMS by retention index prediction.

Implementing effective environmental management strategies requires a comprehensive understanding of the chemical composition of environmental pollutants, particularly in complex mixtures. Utilizing innovative analytical techniques, such as high-resolution mass spectrometry and predictive retention index models, can provide valuable insights into the molecular structures of environmental contaminants. Liquid Chromatography-High-Resolution Mass Spectrometry is a powerful tool for the identification of isomeric structures in complex samples. However, there are some limitations that can prevent accurate isomeric structure identification, particularly in cases where the isomers have similar mass and fragmentation patterns. Liquid chromatographic retention, determined by the size, shape, and polarity of the analyte and its interactions with the stationary phase, contains valuable 3D structural information that is vastly underutilized. Therefore, a predictive retention index model is developed which is transferrable to LC-HRMS systems and can assist in the structural elucidation of unknowns. The approach is currently restricted to carbon, hydrogen, and oxygen-based molecules <500 g mol-1. The methodology facilitates the acceptance of accurate structural formulas and the exclusion of erroneous hypothetical structural representations by leveraging retention time estimations, thereby providing a permissible tolerance range for a given elemental composition and experimental retention time. This approach serves as a proof of concept for the development of a Quantitative Structure-Retention Relationship model using a generic gradient LC approach. The use of a widely used reversed-phase (U)HPLC column and a relatively large set of training (101) and test compounds (14) demonstrates the feasibility and potential applicability of this approach for predicting the retention behaviour of compounds in complex mixtures. By providing a standard operating procedure, this approach can be easily replicated and applied to various analytical challenges, further supporting its potential for broader implementation.

Temperature Responsive × Fast Chiral Comprehensive Liquid Chromatography: a New 2D-LC Platform for Resolving Mixtures of Chiral Isomers.

Chiral resolution of solutes occurring in mixtures of unrelated species is of relevance in life sciences and in pharmaceutical analysis. While this is conceptually achievable by comprehensive two-dimensional liquid chromatography (LC × LC), few approaches exist whereby the second dimension comprises the chiral separation. The latter is preferable in combination with a conventional reversed phase type of separation in the first dimension as it offers an extension of a conventional achiral analysis. The implementation of such rapid chiral analyses in the second dimension was, thus far, limited by the challenging transfer of the first dimension mobile phase to the second dimension while still achieving chiral separation. In this study, the combination of temperature-responsive and reversed-phase chiral liquid chromatography is assessed in terms of enantioselective separation of a broad range of pharmaceutical compounds. Applying temperature-responsive liquid chromatography (TRLC) in the first dimension allows for analyses to be performed under purely aqueous conditions, which then allows for complete and more generic refocusing of (organic) solutes prior to the second dimension. This offers an enhanced ability to employ fast and broad compositional gradients over the chiral dimension, which broadens the applicability of the technique. In the proposed platform, seven chiral columns (superficially porous and fully porous columns (comprising both polysaccharide and macrocyclic antibiotic phases)) and four mobile phase gradients were screened on a pharmaceutical test mixture. The platform was shown to be able to offer the necessary resolving power for the molecules at hand and offers a new approach for chiral screening of mixtures of unrelated compounds.

Speeding up temperature-responsive × reversed-phase comprehensive liquid chromatography through the combined exploitation of temperature and flow rate gradients.

Comprehensive two-dimensional liquid chromatography (LC×LC) can provide enhanced resolving power and higher peak capacities for the separation of complex samples. The transfer of fractions of too high eluotropic strength from the first dimension, however, can lead to peak broadening. This process is related to the column dimensions, the flow rates, mobile phase compositions, and stationary phase compatibility. Temperature-responsive LC (TRLC) uses a smart polymer coupled to silica (poly(N-isopropylacrylamide), pNIPAAm), that exhibits a change in polarity upon modest variations in column temperature. Retention is thus modulated by temperature and not by organic solvents, allowing for the use of purely aqueous mobile phases. As these aqueous mobile phases depict a very low eluotropic strength on a reversed-phase column, it facilitates band refocusing at the second-dimension column head in TRLC×RPLC. One of the remaining obstacles of TRLC is the long analysis time. In this research, the potential of this column combination in terms of analyte refocusing will be exploited. First, it is shown that upwards flow gradients can be implemented in the first dimension of TRLC×RPLC. As the flow in the second dimension is maintained at a constant level, a first-dimension flow gradient does not lead to impaired sensitivity and has no negative effects on the resulting peak size. Then, the novel combination of a downwards temperature gradient with an upwards flow gradient will be introduced to speed up the analyses further. Analysis time was, depending on the method used, reduced by 36-54%, as demonstrated by the analysis of mixtures of food additives, phenolic compounds, and small molecule pharmaceuticals mimicking impurity analysis at a 0.05% level.

Enhanced Sensitivity in Comprehensive Liquid Chromatography: Overcoming the Dilution Problem in LC × LC via Temperature-Responsive Liquid Chromatography.

In comprehensive two-dimensional liquid chromatography (LC × LC), solvents of high eluotropic strength are frequently used in the first dimension (1D), which lead to peak broadening in the second dimension (2D). In the majority of the current LC × LC column combinations, analytes are less than optimally refocused upon transfer to the second column, which negatively affects sensitivity. Furthermore, the typical combination of 1 or 2.1 mm columns in the 1D paired with a 3 mm (or broader) column in the 2D leads to at least a 9- or 4-fold dilution and a corresponding loss of sensitivity when using concentration-sensitive detectors. This occurs due to the enhanced radial dilution of the analytes in a broader column, while the sensitivity problem is further exacerbated in LC × LC due to the high flow operated 2D. In this paper, we introduce a solution to neutralize and inverse this dilution problem through a reconcentrating solution using temperature-responsive liquid chromatography (TRLC) in the 1D, which is a purely aqueous separation mode. Full solute refocusing at the 2D column head is thereby obtained when TRLC is combined with reversed-phase liquid chromatography (RPLC). This is shown for the combination of a 2.1 mm I.D. TRLC column with decreasing RPLC column diameters (3-2.1-1 mm) operated at the same linear velocities, hence a resulting decrease in dilution, respectively. Ultraviolet (UV) and electrospray ionization time-of-flight mass spectrometry (ESI-TOF-MS) detection were used to determine the experimental detection limits. Sensitivity improvements with UV detection were somewhat lower than expected, but represent ∼1.5- and 3-fold sensitivity enhancement when using a 1 mm I.D. column compared to 2.1 or 3 mm I.D. columns in the 2D, respectively. This is attributed to extra-column dispersion and the poorer performance of 1 mm I.D. columns. A major benefit of the use of 1 mm I.D. columns in the 2D is that it allows split-free coupling of 2D effluent with ESI-MS (at 450 µL/min), making the coupling robust and simple. When using ESI-MS even better, albeit more variable, sensitivity enhancements were obtained on the narrower columns. The benefits of the methodology are demonstrated for paraben test solutes and for phenolic compounds in a blueberry extract by TRLC × RPLC-UV-ESI-TOF-MS.

Hyphenating temperature gradient elution with refractive index detection through temperature-responsive liquid chromatography.

Refractive index detection (RID) is attractive because it allows approaching the benefits of universal detection with liquid chromatography, by which ideally standard independent calibration and hence compound independent quantification becomes possible. Nevertheless, the implementation of RID has remained limited as it offers poor detection sensitivity while only being compatible with isocratic mobile phases. The implementation of compositional solvent gradients has remained prohibitively challenging in commercial HPLC-RID systems due to the resulting drastic alterations in refractive index and extreme baseline drift. While the refractive index is also highly dependent on temperature, more leeway appears possible to mitigate the problem, particularly when the used temperature gradients can be limited. Temperature-responsive liquid chromatography (TRLC) allows obtaining isocratic reversed phase type of separations, whereby retention is modulated via temperature changes âˆ¼ 15 °C-20 °C above and below the polymer conversion temperature. Elution profiles, reminiscent of what can be obtained with solvent gradients in conventional RPLC, can then be obtained by enacting downwards temperature gradients on the columns. This work comprises a proof-of-principle to illustrate the possibilities of combining thermal gradient TRLC with RID. The observed baseline drift appeared thereby very minor (<5 nRIU min-1), and hence easily controllable. Short chain fatty acids are used as representative compounds to assess this new approach. Overlapping calibration lines are accordingly obtained for all fatty acids between butyric and decanoic acid.

3D-LC-MS with 2D Multimethod Option for Fully Automated Assessment of Multiple Attributes of Monoclonal Antibodies Directly from Cell Culture Supernatants.

Fully automated analysis of multiple structural attributes of monoclonal antibodies (mAbs) using three-dimensional liquid chromatography-mass spectrometry (3D-LC-MS) is described. The analyzer combines Protein A affinity chromatography in the first dimension (1D) with a multimethod option in the second dimension (2D) (choice between size exclusion (SEC), cation exchange (CEX), and hydrophobic interaction chromatography (HIC)) and desalting SEC-MS in the third dimension (3D). This innovative 3D-LC-MS setup allows simultaneous and sequential assessment of mAb titer, size/charge/hydrophobic variants, molecular weight (MW), amino acid (AA) sequence, and post-translational modifications (PTMs) directly from cell culture supernatants. The reported methodology that finds multiple uses throughout the biopharmaceutical development trajectory was successfully challenged by the analysis of different trastuzumab and tocilizumab samples originating from biosimilar development programs.

Comprehensive two-dimensional temperature-responsive × reversed phase liquid chromatography for the analysis of wine phenolics.

Phenolic compounds are an interesting class of natural products because of their proposed contribution to health benefits of foods and beverages and as a bio-source of organic (aromatic) building blocks. Phenolic extracts from natural products are often highly complex and contain compounds covering a broad range in molecular properties. While many 1D-LC and mass spectrometric approaches have been proposed for the analysis of phenolics, this complexity inevitably leads to challenging identification and purification. New insights into the composition of phenolic extracts can be obtained through online comprehensive two-dimensional liquid chromatography (LC × LC) coupled to photodiode array and mass spectrometric detection. However, several practical hurdles must be overcome to achieve high peak capacities and to obtain robust methods with this technique. In many LC × LC configurations, refocusing of analytes at the head of the 2D column is hindered by the high eluotropic strength of the solvent transferred from the 1D to the 2D, leading to peak breakthrough or broadening. LC × LC combinations whereby a purely aqueous mobile phase is used in the 1D and RPLC is used in the 2D are unaffected by these phenomena, leading to more robust methods. In this contribution, the combination of temperature-responsive liquid chromatography (TRLC) with RPLC is used for the first time for the analysis of phenolic extracts of natural origin to illustrate the potential of this alternative combination for natural product analyses. The possibilities of the combination are investigated through analysis of wine extracts by TRLC × RPLC-DAD and TRLC × RPLC-ESI-MS.

Investigation of the potential of mixed solvent mobile phases in temperature-responsive liquid chromatography (TRLC).

Temperature-responsive liquid chromatography (TRLC) allows for extensive retention and selectivity tuning through temperature in HPLC. This is mainly achieved through the use of a stationary phases comprising of a temperature-responsive polymer which undergoes a reversible change from hydrophilic to hydrophobic behaviour upon increasing the temperature. The approach can allow for reversed phase type separations to be achieved with purely aqueous mobile phases, whereby the retention is controlled through temperature instead of mobile phase composition. Despite the promising nature of such form of retention control under isocratic mobile phase conditions, TRLC can suffer from excessive retention of highly apolar solutes even at lower column temperatures whereby the polymer is considered hydrophilic. This is related both to a residual apolarity of the polymer chain and due to the high log P's and low water solubility of higly apolar compounds. While it was known that elution in TRLC doesn't necessarily has to be performed under purely aqueous conditions and that the use of organic co-solvents to the water is possible, the impact thereof on the temperature responsive behaviour itself had not yet been investigated in a systematic way. Therefore in this work the advantages and drawbacks of the use of the organic co-solvents methanol and acetonitrile in TRLC is assessed on two types of temperature reponsive phases: poly-N-N-propylacrylamide (PNNPAAm) and poly-N-isopropylacrylamide (PNIPAAm). The influence of organic co-solvents is investigated with two representative test mixtures (comprising 4 parabens and 5 apolar steroids).

Implementations of temperature gradients in temperature-responsive liquid chromatography.

Temperature Responsive Liquid Chromatography (TRLC) offers an alternative and environmentally friendly way to perform reversed-phase like separations. Its use of temperature responsive polymers to control retention based on column temperature, instead of the fraction of organic modifier in the mobile phase mobile, eliminates the need for solvent composition gradients and allows, for example, for purely aqueous separations. In principle this temperature induced retention should allow for gradient elutions to be performed using downward temperature gradients to control retention and refocus the analyte peaks. Yet, the unavailability of dedicated commercial temperature controlling systems allowing suitable temperature control in TRLC limits implementations thereof often to isothermal or step gradient applications. In this work we study the potential of 1) a simple yet programmable water bath and of 2) a modified HPLC system allowing column temperature programming through controlled mixing of a warm and cold mobile phase streams. The performance of both systems was evaluated under both isocratic and gradient applications, resulting in a more thorough understanding of the influence of temperature gradients in TRLC. This knowledge is then applied to a sample of phenolic solutes, illustrating that, although both systems have some flaws, both are able to impose temperature gradients in TRLC resulting in significantly reduced retention and enhanced refocusing of the analyte peak.

Chemical composition of essential oils of eight Tunisian Eucalyptus species and their antibacterial activity against strains responsible for otitis.

BACKGROUND: The chemical composition and biological activity of Eucalyptus essential oils have been studied extensively (EOs). A few of them were tested for antibacterial effectiveness against otitis strains. The chemical composition and antibacterial activity of the EOs of eight Tunisian Eucalyptus species were assessed in the present study. METHODS: Hydrodistillation was used to extract EOs from the dried leaves of eight Eucalyptus species: Eucalyptus accedens, Eucalyptus punctata, Eucalyptus robusta, Eucalyptus bosistoana, Eucalyptus cladocalyx, Eucalyptus lesouefii, Eucalyptus melliodora and Eucalyptus wandoo. They are assessed by GC/MS and GC/FID and evaluated for antibacterial activity using agar diffusion and broth microdilution techniques against three bacterial isolates (Haemophilus influenzae, Haemophilus parainfluenzae, Klebsiella pneumoniae) and three reference bacteria strains (Pseudomonas aeruginosa, ATTC 9027; Staphylococcus aureus, ATCC 6538; and Escherichia coli, ATCC 8739). Furthermore, the selected twenty-one major compounds and all values of the inhibition zone diameters were subjected to further statistical analysis using PCA and HCA. RESULTS: The EO yields of the studied Eucalyptus species range from 1.4 ± 0.4% to 5.2 ± 0.3%. Among all the species studied, E. lesouefii had the greatest mean percentage of EOs. The identification of 128 components by GC (RI) and GC/MS allowed for 93.6% - 97.7% of the total oil to be identified. 1,8-cineole was the most abundant component found, followed by α-pinene, p-cymene, and globulol. The chemical components of the eight EOs, extracted from the leaves of Eucalyptus species, were clustered into seven groups using PCA and HCA analyses, with each group forming a chemotype. The PCA and HCA analyses of antibacterial activity, on the other hand, identified five groups. CONCLUSION: The oils of E. melliodora, E. bosistoana, and E. robusta show promise as antibiotic alternatives in the treatment of otitis media.

Monoclonal antibody charge variant characterization by fully automated four-dimensional liquid chromatography-mass spectrometry.

Fully automated characterization of monoclonal antibody (mAb) charge variants using four-dimensional liquid chromatography-mass spectrometry (4D-LC-MS) is reported and illustrated. Charge variants resolved by cation-exchange chromatography (CEX) using a salt- or pH-gradient are collected in loops installed on a multiple heart-cutting valve and consequently subjected to online desalting, denaturation, reduction and trypsin digestion prior to LC-MS based peptide mapping. This innovation which substantially reduces turnaround time, sample manipulation, loss and artefacts and increases information gathering, is described in great technical detail, and applied to characterize the charge heterogeneity associated with three therapeutic mAbs. Sequence coverages > 95% are obtained for major and minor charge variants (> 1.0%). Post-translational modifications (PTMs) and modification sites are readily revealed in a repeatable manner including unstable succinimide intermediates which are not maintained when performing classical in-solution overnight digestion of offline collected CEX peaks.

Through-pore polymerization in polar high-performance liquid chromatography columns allowing scanning electron microscopy based imaging of the packing order.

To allow an enhanced understanding of the order in packed HPLC columns, in this work a methodology for immobilizing native polar silica particles is developed based on the polymerization of a methyl methacrylate (MMA) and ethylene glycol dimethacrylate (EGDMA) as a cross-linker in the interstitial pores of HPLC columns. Subsequent mechanical cutting then allows scanning electron microscopy (SEM) based imagery of cross-sections of the packed bed. In this way, the packing efficiency of home-made and commercial HPLC columns with 4.6 mm inner diameter and 150 mm length comprising the same packing material of 5 µm silica particles are compared. The methodology is developed for native silica used in e.g. hydrophilic interaction liquid chromatography (HILIC) and in normal phase LC. In order to confirm the feasibility of the developed methodology, the conventional methods for the evaluation of column, efficiency and porosity, are also employed. The obtained porosity information is compared and showed the same trend with the external porosity measurements obtained via inverse size exclusion approach, illustrating its potential application to study the micro-heterogeneity of packed HPLC columns and to guide the optimization of the packing process of HPLC columns.