Pyrotechnic Delay Compositions Based on BaO2: Not as "Green" as Expected.

The aims of this study were to investigate the potential of using barium peroxide as an environmentally friendly oxidising agent, to evaluate the composition of the combustion products of the developed pyrotechnic delay compositions (PDCs) and to provide information about the impact of the utilised metallic fuel (Mg, Al, Fe or Cu) on the properties of those PDCs. The PDCs exhibited acceptable friction and impact sensitivity values. This allowed conducting further experiments, e.g., determining the linear combustion velocity of the PDCs as a function of oxygen balance (OB). Based on the composition of the post-combustion residues, determined by Raman spectroscopy and SEM-EDS, an initial mechanism for the combustion of the developed PDCs was proposed.

Traditional vs. Energetic and Perchlorate vs. "Green": A Comparative Study of the Choice of Binders and Oxidising Agents.

The aim of this article is to compare rocket propellants containing a traditional binder (hydroxyl-terminated polybutadiene) and an energetic binder (glycidyl azide polymer), as well as a perchlorate oxidising agent and a "green" one, i.e., ammonium perchlorate and phase-stabilised ammonium nitrate. We have outlined the effects of individual substances on the sensitivity parameters and decomposition temperature of the produced solid propellants. The linear combustion velocity was determined using electrical methods. Heats of combustion for the propellant samples and the thermal decomposition features of the utilised binders were investigated via differential scanning calorimetry (DSC). Activation energy values for the energetic decomposition of the propellants were determined via the Kissinger method, based on DSC measurements at varied heating rates.

Energetic Polyoxetanes as High-Performance Binders for Energetic Composites: A Critical Review.

Energetic oxetanes, a group of energetic binders (EBs), are the focus of this review. We briefly introduce the role of binders and the difference between EBs and traditional "non-energetic" polymer binders, followed by a discussion of the synthesis and key properties of polyoxetanes. Priority is given to recent works, but a long-term perspective is provided where necessary, to illustrate the development of this field and the most relevant emerging trends. New reports on methods of obtaining oxetane polymers are presented; concerning the possibility of using a new catalyst, water: Al(C4H9)3, or the ratio of comonomers on the properties of the obtained binders. The synthesis of copolymers with the use of polymers with an oxetane ring and polyethers, polybutadiene terminated with hydroxyl groups and poly (3-difluoroaminomethyl-3-methyloxetane) is discussed. The latest developments in crosslinking reactions and crosslinking agents used are also described. The primary challenges faced by the field are identified and a perspective on the future development of polyoxetane EBs is presented.

Solid Propellant Formulations: A Review of Recent Progress and Utilized Components.

The latest developments in solid propellants and their components are summarized. Particular attention is given to emerging energetic binders and novel, 'green' oxidizing agents and their use in propellant formulations. A brief overview of the latest reports on fuel additives is included. Finally, a summary of the state of the art and challenges in its development are speculated on.