RESUMEN
In the present study, we report on the successful synthesis of hollow iron oxide nanospheres. The hollow Fe3O4 nanospheres were synthesized following a four-step procedure: electrospraying spherical PVP particles, coating these particles with alumina (Al2O3) and hematite (Fe2O3) through atomic layer deposition and, finally, a thermal reduction process to degrade the polymer (PVP) and convert hematite (Fe2O3) into magnetite (Fe3O4). A structural analysis using X-ray diffraction (XRD) confirmed the effectiveness of the thermal reduction process. A morphological analysis confirmed that the four-step procedure allowed for the obtainment of hollow iron oxide nanospheres, even though the reduction process caused a contraction in the diameter of the particles of almost 300 nm, but did not affect the thickness of the walls of the hollow spheres that remained at approximately 15 nm. Magnetic properties of the hollow iron oxide nanospheres enable their use in applications where the agglomeration of magnetic nanostructures in liquid media is commonly not allowed, such as in drug encapsulation and delivery.
RESUMEN
Carbon-metal-based composites arise as advanced materials in the frontiers with nanotechnology, since the properties inherent to each component are multiplexed into a new material with potential applications. In this work, a novel composite consisting of randomly oriented permalloy nanowires (Py NWs) intercalated among the sheets of multi-layered graphene oxide (GO) was performed. Py NWs were synthesized by electrodeposition inside mesoporous alumina templates, while GO sheets were separated by means of sonication. Sequential deposition steps of Py NWs and GO flakes allowed to reach a reproducible and stable graphene oxide-based magnetic assembly. Microscopic and spectroscopic results indicate that Py NWs are anchored on the surface as well as around the edges of the multi-layered GO, promoted by the presence of chemical groups, while magnetic characterization affords additional support to our hypothesis regarding the parallel orientation of the Py NWs with respect to the GO film, and also hints the parallel stacking of GO sheets with respect to the substrate. The most striking result remains on the electrochemical performance achieved by the composite that evidences an enhanced conductive behaviour compared to a standard electrode. Such effect provides an approach to the development of permalloy nanowires/graphene oxide-based electrodes as attractive candidates for molecular sensing devices.
RESUMEN
An antimicrobial polymeric bilayer structure based on the application of an acrylic coating containing hollow zinc oxide nanotubes over a polymeric substrate was developed in this work. Firstly, zinc oxide nanotubes (ZnONT) were obtained by an atomic layer deposition (ALD) process over electrospun polyvinyl alcohol nanofibers followed by polymer removal through calcination with the purpose of obtaining antimicrobial nanostructures with a high specific area. Parameters of electrospinning, ALD, and calcination processes were set in order to obtain successfully hollow zinc oxide nanotubes. Morphological studies through scanning electron microscopy (SEM) and transmission electron microscopy (TEM) microscopies confirmed the morphological structure of ZnONT with an average diameter of 180 nm and thickness of approximately 60 nm. Thermal and X-ray diffraction (XRD) analyses provided evidence that calcination completely removed the polymer, resulting in a crystalline hexagonal wurtzite structure. Subsequently, ZnONT were incorporated into a polymeric coating over a polyethylene extruded film at two concentrations: 0.5 and 1 wt. % with respect to the polymer weight. An antimicrobial analysis of developed antimicrobial materials was performed following JIS Z2801 against Staphylococcus aureus and Escherichia coli. When compared to active materials containing commercial ZnO nanoparticles, materials containing ZnONT presented higher microbial inhibition principally against Gram-negative bacteria, whose reduction was total for films containing 1 wt. % ZnONT. Antiviral studies were also performed, but these materials did not present significant viral reduction.
RESUMEN
La sangre de cordón es una alternativa no invasiva que ha sido empleada para el tamizaje de sífilis congénita. Los objetivos del trabajo fueron evaluar la validez del uso de sangre de cordón como muestra para tamizaje de casos presuntivos de sífilis congénita, determinar la prevalencia de sífilis materna, estudiar la tasa de casos presuntivos de sífilis congénita y establecer el porcentaje de madres no estudiadas para sífilis en el periparto. Se realizó un análisis retrospectivo y observacional entre junio de 2017 y mayo de 2018. Se relevaron datos de serología de sangre de cordón y sangre de la madre. Se utilizó Unheated Serum Reagin como prueba de tamizaje y FTA-Abs y/o quimioluminiscencia como confirmatorias. Se excluyeron los binomios madre-hijo sin estudio de sangre de cordón. Binomios madre-hijo estudiados: 2.487. Sensibilidad y especificidad: 82,29% IC 95% (73,17- 89,33) y 99,96% IC 95% (99,76-100,00), respectivamente. Prevalencia de sífilis materna: 4,04%. Tasa de caso presuntivo de sífilis congénita: 26/1.000 RNV. Madres sin registros de serología para sífilis en el periparto: 70 (2,86%). La sangre de cordón no sería una muestra válida para el tamizaje debido a la baja sensibilidad encontrada, aunque en muchos casos es la única oportunidad de evaluar el binomio madre-hijo.
Cord blood is a non-invasive alternative which has been used for screening of congenital syphilis. The aims of the present study were to evaluate the validity of the use of cord blood as a sample for the screening of a probable congenital syphilis case, to study the prevalence of maternal syphilis, to analyse the rate of probable congenital syphilis case and to determine the percentage of non-studied mothers for syphilis in the peripartum. A retrospective and observational analysis was conducted between June 2017 and May 2018. Cord blood and maternal blood serology results were taken from the Laboratory Information System. Unheated Serum Reagin was used as a screening test and FTA-Abs and/or quimioluminiscense as confirmatory studies. Infant-mother binomies without cord blood studies were excluded. Infant-mother binomies studied: 2487. Sensibility and specificity 82.29% [95% CI: 73.17 to 89.33] and 99.96% [95% CI: 99.76 to 100.00], respectively. MSP prevalence: 4.04%. Probable congenital syphilis case rate: 26/1000 NB. Non-studied mothers for syphilis in the peripartum: 70 (2.86%). Cord blood would not be a valid sample for screening due to the low sensibility found, although in many cases it is the only opportunity to evaluate the infant-mother binomies.
O sangue do cordão é uma alternativa não invasiva que tem sido usada para triagem da sífilis congênita. Os objetivos do trabalho foram avaliar a validade do uso do sangue do cordão como amostra para o rastreio de um caso presumível de sífilis congénita, determinar a prevalência da sífilis materna, estudar a taxa de caso presumível de sífilis congénita e estabelecer a percentagem de mães em que não se analisa a sífilis no periparto. Foi realizada entre junho de 2017 e maio de 2018 uma análise retrospectiva e observacional, onde foram colectados os dados do Sistema de Computação Laboratorial de sorologia sangue do cordão e sangue da mãe. Foi utilizado um Unheated Serum Reagin como teste de triagem e FTA-Abs e/ou quimiluminescência como confirmatórias. Os binomios mãe-filho foram excluídos sem o estudo do sangue do cordão. Binomios mãe-filho estudado: 2.487. Sensibilidade e especificidade: 82,29% IC 95% (73,17-89,33) y 99,96% IC 95% (99,76-100,00), respectivamente. Prevalência de SFM: 4,04%. Taxa CPSC: 26/1.000 RNV. Mães sem registros sorológicos para sífilis no periparto: 70 (2,86%). O sangue do cordão não seria uma amostra válida para triagem devido à baixa sensibilidade encontrada, no entanto em muitos casos é a única oportunidade do avaliar o binomios mãe-filho.
