SSFLNet: A Novel Fault Diagnosis Method for Double Shield TBM Tool System.

In tunnel boring projects, wear and tear in the tooling system can have significant consequences, such as decreased boring efficiency, heightened maintenance costs, and potential safety hazards. In this paper, a fault diagnosis method for TBM tooling systems based on SAV-SVDD failure location (SSFL) is proposed. The aim of this method is to detect faults caused by disk cutter wear during the boring process, which diminishes the boring efficiency and is challenging to detect during construction. This paper uses SolidWorks to create a complete three-dimensional model of the TBM hydraulic thrust system and tool system. Then, dynamic simulations are performed with Adams. This helps us understand how the load on the propulsion hydraulic cylinder changes as the TBM tunneling tool wears to different degrees during construction. The hydraulic propulsion system was modeled and simulated using AMESIM software. Utilizing the load on the hydraulic propulsion cylinder as an input signal, pressure signals from the two chambers of the hydraulic cylinder and the system's flow signal were acquired. This enabled an in-depth exploration of the correlation between these acquired signals and the extent of the tooling system failure. Following this analysis, a collection of normal sample data and sample data representing different degrees of disk cutter abrasions was amassed for further study. Next, an SSFL network model for locating the failure area of the cutter was established. Fault sample data were used as the input, and the accuracy of the fault diagnosis model was tested. The test results show that the performance of the SSFL network model is better than that of the SAE-SVM and SVDD network models. The SSFL model achieves 90% accuracy in determining the failure area of the cutter head. The model effectively identifies the failure regions, enabling timely tool replacement to avoid decreased boring efficiency under wear conditions. The experimental findings validate the feasibility of this approach.

Real-Time Leak Location of Long-Distance Pipeline Using Adaptive Dynamic Programming.

In traditional leak location methods, the position of the leak point is located through the time difference of pressure change points of both ends of the pipeline. The inaccurate estimation of pressure change points leads to the wrong leak location result. To address it, adaptive dynamic programming is proposed to solve the pipeline leak location problem in this article. First, a pipeline model is proposed to describe the pressure change along pipeline, which is utilized to reflect the iterative situation of the logarithmic form of pressure change. Then, under the Bellman optimality principle, a value iteration (VI) scheme is proposed to provide the optimal sequence of the nominal parameter and obtain the pipeline leak point. Furthermore, neural networks are built as the VI scheme structure to ensure the iterative performance of the proposed method. By transforming into the dynamic optimization problem, the proposed method adopts the estimation of the logarithmic form of pressure changes of both ends of the pipeline to locate the leak point, which avoids the wrong results caused by unclear pressure change points. Thus, it could be applied for real-time leak location of long-distance pipeline. Finally, the experiment cases are given to illustrate the effectiveness of the proposed method.

Insufficient Data Generative Model for Pipeline Network Leak Detection Using Generative Adversarial Networks.

In terms of pipeline leak detection, the unavoidable fact is that existing data could not provide enough effective leak data to train a high accuracy model. To address this issue, this article proposes mixed generative adversarial networks (mixed-GANs) as a practical way to provide additional data, ensuring data reliability. First, multitype generative networks with heterogeneous parameter-updating mechanisms are designed to explore a variety of different solutions and eliminate the potential risks of instable training and scenario collapse. Then, based on expert experience, two data constraints are proposed to describe leak characteristics and further evaluate the quality of generated leak data in the training process. Through integrating the particle swarm optimization algorithm into generative model training, mixed-GAN has better generation performance than the conventional gradient descent algorithm. Based on the above-mentioned contents, the proposed model is able to provide satisfactory leak data with different scenarios, contributing to data quantity expansion, data credibility enhancement, and data variety enrichment. Finally, extensive experiments are given to illustrate the effectiveness of the proposed generative model for pipeline network leak detection.

An Optimal Three-Dimensional Drone Layout Method for Maximum Signal Coverage and Minimum Interference in Complex Pipeline Networks.

In daily pipeline inspection, it is significant to ensure good network communication and security. With the development of drone technology, it is possible to apply drones as air routers to collect information from pipeline networks and transmit it to pipeline inspectors. It is also crucial to achieve optimal drone deployment in pipeline networks. This article proposes a two-phase evolution optimal 3-D drone layout algorithm to deploy drones in pipeline networks. First, a 3-D pipeline graph model is designed to represent the possible projection position of drones, and the objective function is proposed for optimal drone deployment. Then, in the first phase, based on the features of the 3-D pipeline graph, the drone flight rules and constraint conditions are presented to calculate the number of drones and the initial layout sequence. In the second phase, according to the objective function and the above results, every drone is continuously moved in a small area to achieve a tradeoff between signal coverage and interference. Moreover, the key parameters of the objective function can be discussed to further optimize drone deployment. Simulation results are presented to illustrate the effectiveness and advantages of the proposed algorithm.

Accurate Power Sharing and Voltage Regulation for AC Microgrids: An Event-Triggered Coordinated Control Approach.

The microgrid with the high proportion of renewable sources has become the trend of the future. However, the negative features, such as renewable energy perturbation, nonlinear counterpart, and so on, are prone to causing the low-power quality of the ac microgrid. To deal with these problems, this article proposes an event-triggered consensus control approach. First, the nonlinear state-space function regarding the ac microgrid is built, which is further transformed into the standard linear multiagent model by using the singular perturbation method. It provides indispensable preprocessing for the direct application of advanced linear control approaches. Then, based on this standard linear multiagent model, the secondary consensus approach with the leader is designed to compensate for the output voltage deviation and achieve accurate power sharing. In order to decrease the communication among various distributed generators, the event-triggered communication method is further proposed. Meanwhile, the Zeno behavior is avoided through the theoretical proof. Finally, simulation results are presented to demonstrate the effectiveness of the proposed approach.

Situation awareness method using spectral analysis of random matrix for integrated energy system.

Situation awareness is essential to ensure operation of integrated energy systems consisting of the electricity, gas and heat systems. However, the multi-energy flow characteristics of system result in strong coupling relationships among different subsystems including different detection variables, which bring new challenges to situation awareness. To address this issue, a data driven detection method based on spectral analysis of random matrix is proposed in this paper. Firstly, a detection matrix model, which combines different types of variables, is established to fully reflect the interdependencies among subsystems, both internal and external. Furthermore, a novel detection method, which analyzes the degree of the spectral deviation of presented model, is presented to accomplish situation awareness. The proposed method can effectively handle the problem of power-gas-heat coupling, multi-variable modeling and rapid situation judging without requiring complicated numerical model. With this effort, not only the changed time but also the position of changed node could be obtained simultaneously through only spectral computation. Finally, simulation results are presented to illustrate the effectiveness of the proposed detection method.

Data-core-based fuzzy min-max neural network for pattern classification.

A fuzzy min-max neural network based on data core (DCFMN) is proposed for pattern classification. A new membership function for classifying the neuron of DCFMN is defined in which the noise, the geometric center of the hyperbox, and the data core are considered. Instead of using the contraction process of the FMNN described by Simpson, a kind of overlapped neuron with new membership function based on the data core is proposed and added to neural network to represent the overlapping area of hyperboxes belonging to different classes. Furthermore, some algorithms of online learning and classification are presented according to the structure of DCFMN. DCFMN has strong robustness and high accuracy in classification taking onto account the effect of data core and noise. The performance of DCFMN is checked by some benchmark datasets and compared with some traditional fuzzy neural networks, such as the fuzzy min-max neural network (FMNN), the general FMNN, and the FMNN with compensatory neuron. Finally the pattern classification of a pipeline is evaluated using DCFMN and other classifiers. All the results indicate that the performance of DCFMN is excellent.