The intracellular concentrations of fluoroquinolones determined the antibiotic resistance response of Escherichia coli.

The extensive consumption of antibiotics has been reported to significantly promote the generation of antibiotic resistance (ABR), however, a quantitative causal relationship between antibiotic exposure and ABR response is absent. This study aimed to pinpoint the accurate regulatory concentration of fluoroquinolones (FQs) and to understand the biochemical mechanism of the mutual action between FQ exposure and FQ resistance response. Highly sensitive analytical methods were developed by using UPLC-MS/MS to determine the total residual, extracellular residual, total intracellular, intracellular residual and intracellular degraded concentration of three representative FQs, including ciprofloxacin (CIP), ofloxacin (OFL) and norfloxacin (NOR), with detection limits in the range of 0.002-0.057 µg/L, and recoveries in the range of 80-93%. The MICs of Escherichia coli (E. coli) were 7.0-31.4-fold of the respective MIC0 after 40-day FQ exposure, and significant negative associations were discovered between the intracellular (residual, degraded or the sum) FQ concentrations and FQ resistance. Transcriptional expression and whole-genome sequencing results indicated that reduced membrane permeability and enhanced multi-drug efflux pumps contributed to the decreasing intracellular concentration. These results unveiled the pivotal role of intracellular concentration in triggering FQ resistance, providing important information to understand the dose-response relationship between FQ exposure and FQ resistance response, and ascertain the target dose metric of FQs for eliminating FQ resistance crisis.

Switchable NaCl cages via a MWCNTs/Ni[Fe(CN)6]2 nanocomposite for high performance desalination.

With the application of nanomaterials in seawater desalination technology increasing, the adjustable characteristics of carbon-based nanomaterials make it possible to use multiwalled carbon nanotube (MWCNT) materials in seawater desalination technology. In this study, Ni[Fe(CN)6]2 is loaded onto the inner wall of MWCNTs by the co-precipitation method to prepare MWCNTs with variable pore size, making it a switchable cage for NaCl. During the procedure, most of the Ni[Fe(CN)6]2 is transferred to the outer surface of the MWCNTs after adsorption, and NaCl is stored inside the MWCNTs (which have been proved by characterization); at the same time, Ni can improve the cell stability of Ni[Fe(CN)6]2. The effect of adsorbent reaction time and addition amount on the desalination performance of MWCNTs/Ni[Fe(CN)6]2 has been tested. According to the results, the best desalination performance of MWCNTs/Ni[Fe(CN)6]2 is 1354.6 mg g-1 when the reaction time is 0.5 h and the addition amount is 20 mg. After 3 cycles of adsorption and desorption, its desalting performance decreased to 242.3 mg g-1.

Role of NLRP3 inflammasome in diabetes and COVID-19 role of NLRP3 inflammasome in the pathogenesis and treatment of COVID-19 and diabetes NLRP3 inflammasome in diabetes and COVID-19 intervention.

2019 Coronavirus Disease (COVID-19) is a global pandemic caused by severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2). A "cytokine storm", i.e., elevated levels of pro-inflammatory cytokines in the bloodstream, has been observed in severe cases of COVID-19. Normally, activation of the nucleotide-binding oligomeric domain-like receptor containing pyrin domain 3 (NLRP3) inflammatory vesicles induces cytokine production as an inflammatory response to viral infection. Recent studies have found an increased severity of necrobiosis infection in diabetic patients, and data from several countries have shown higher morbidity and mortality of necrobiosis in people with chronic metabolic diseases such as diabetes. In addition, COVID-19 may also predispose infected individuals to hyperglycemia. Therefore, in this review, we explore the potential relationship between NLRP3 inflammatory vesicles in diabetes and COVID-19. In contrast, we review the cellular/molecular mechanisms by which SARS-CoV-2 infection activates NLRP3 inflammatory vesicles. Finally, we propose several promising targeted NLRP3 inflammatory vesicle inhibitors with the aim of providing a basis for NLRP3-targeted drugs in diabetes combined with noncoronary pneumonia in the clinical management of patients.

Glucosamine-loaded injectable hydrogel promotes autophagy and inhibits apoptosis after cartilage injury.

The ability of cartilage to regenerate and repair is limited. N-acetyl- d-glucosamine (GlcNAc) is a nutritional supplement commonly used to activate chondrocytes. To prolong the duration of action of GlcNAc and improve its curative effect after cartilage injury, a GlcNAc thermosensitive hydrogel is prepared based on Pluronic F127 (PF127). The physicochemical properties results indicate that this hydrogel is injectable and retards the release of GlcNAc. Further, the therapeutic benefits of GlcNAc hydrogel are detected through intra-articular injection in rat specimens with cartilage injury. Behavioral experiments results indicate that the rats treated with GlcNAc hydrogel had longer step lengths, smaller foot angles and slower fall times. Compared with the sham group, the expression of Sox9 was 1.5 times and the level of collagen II was 2.4 times in the hydrogel treated group. Terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL) staining result confirmed that the GlcNAc hydrogel reduce apoptosis by about 50%. Our results of immunohistochemical staining, Western blotting assays and enzyme activity detection all suggested that GlcNAc hydrogel reduce the expression of cleaved-caspase3 and caspase8 (Compared to the sham group, the protein contents were reduced by about 50% in the GlcNAc hydrogel group). We also found that GlcNAc hydrogel activates autophagy through ERK signal pathway. The results of Western blotting indicated that GlcNAc hydrogel increase the levels of LC3B and Becline1 (hydrogel group & sham group, LC3B: 1.56 ± 0.07 & 1.00 ± 0.14; Becline1: 1.98 ± 0.07 & 1.00 ± 0.13). Whereas, the content of P62 reduced after GlcNAc hydrogel treatment, the relative level in sham group and hydrogel group are 1.00 ± 0.02 and 0.73 ± 0.06. Our results revealed that the number of P-ERK positive cells in the hydrogel group (57.36 ± 3.56%) was higher when compared with the sham (24.82 ± 2.72%). And, the ratio of P-ERK and ERK was higher than that in the sham group (1.48 ± 0.07 & 1.00 ± 0.08). The GlcNAc thermosensitive hydrogel is a promising and sustainable drug delivery system for intra-articular injection in the treatment of cartilage injury.

A geopolymer membrane for application in a structural mechanics and energy storage difunctional supercapacitor.

A structural mechanics and energy storage difunctional supercapacitor based on a geopolymer membrane injected with a 0.5 M Na2SO4 electrolyte and a pseudocapacitive electrode Mn7O13 is designed and assembled. The geopolymer membrane is prepared as a structural electrolyte with metakaolin and alkaline activator solution. The wide channels in the geopolymer matrix provide paths for ion movement. The Mn7O13 electrode is prepared by different hydrothermal treatments at different temperatures and times, and assembled with activated carbon and a geopolymer with different moduli to form a difunctional supercapacitor. The results show that the electrode sample annealed at 300 °C for 45 min after hydrothermal treatment at 160 °C for 24 h exhibits the best comprehensive performance. The specific capacitance of the electrode is 175.5 F g-1 (2392.6 F m-2) at 1 A g-1, and the specific capacitance of the difunctional structure supercapacitor assembled with a geopolymer with a modulus of 1.2 and cured for 28 days is 144.12 F g-1 (1960.0F m-2) at 1 A g-1 under 15 MPa.

Measurement of ATGL activity using adiposomes.

Adipose triacylglycerol lipase (ATGL) is a dynamic lipid droplet-associated protein involved in cellular lipolysis, which is conserved from bacteria to humans. Recent methods that measure the enzymatic activity of ATGL in vitro are established using lipid emulsions. However, the lipid emulsion platforms contain various membranous structures which reduce the accuracy of enzymatic activity determination. Therefore, a new platform and corresponding method are required for accurate measurement of ATGL enzymatic activity that represents cellular lipid and energy homeostasis. Adiposomes are artificial lipid nanostructures mimicking lipid droplets. Employing adiposome as a platform, we have developed an assay to measure the enzymatic activity of ATGL in vitro. Here, a detailed protocol is described to explain how to measure the activity of ATGL using adiposomes. This method successfully proves the concept of lipid droplet-mimetic lipase activity determining platform and provides a tool to identify the active sites of lipases.

Low-dimensional high entropy oxide (FeCoCrMnNi)3O4 for supercapacitor applications.

Previous studies have found that high entropy oxides can be used as electrode materials for supercapacitors. However, there is still the problem of their low energy density. We tried to increase the energy density while increasing the specific capacitance of high entropy oxides from the potential window. Transition metal elements Fe, Co, Cr, Mn and Ni were selected for their electrochemical activity, and high entropy oxides were prepared by a sol-gel method under different calcination temperatures. The calcination temperature affects the structural morphology and crystallinity of the high entropy oxides and thus also affects the electrochemical performance. The spinel-phase (FeCoCrMnNi)3O4 with a high specific surface area of 63.1 m2 g-1 was prepared at a low calcination temperature of 450 °C. The specific capacitance is 332.2 F g-1 at a current density of 0.3 A g-1 in 1 M KOH electrolyte with a wide potential window of (-1, 0.6). An improved energy density of 103.8 W h kg-1 is reached via the designed microstructure of the high entropy oxide electrode.

Connectomic disturbances in Duchenne muscular dystrophy with mild cognitive impairment.

Duchenne muscular dystrophy (DMD) is frequently associated with mild cognitive deficits. However, the underlying disrupted brain connectome and the neural basis remain unclear. In our current study, 38 first-episode, treatment-naive patients with DMD and 22 matched healthy controls (HC) were enrolled and received resting-sate functional magnetic resonance imaging scans. Voxel-based degree centrality (DC), seed-based functional connectivity (FC), and clinical correlation were performed. Relative to HC, DMD patients had lower height, full Intellectual Quotients (IQ), and IQ-verbal comprehension. Significant increment of DC of DMD patients were found in the left dorsolateral prefrontal cortex (DLPFC.L) and right dorsomedial prefrontal cortex (DMPFC.R), while decreased DC were found in right cerebellum posterior lobe (CPL.R), right precentral/postcentral gyrus (Pre/Postcentral G.R). DMD patients had stronger FC in CPL.R-bilateral lingual gyrus, Pre/Postcentral G.R-Insular, and DMPFC.R-Precuneus.R, had attenuated FC in DLPFC.L-Insular. These abnormally functional couplings were closely associated with the extent of cognitive impairment, suggested an over-activation of default mode network and executive control network, and a suppression of primary sensorimotor cortex and cerebellum-visual circuit. The findings collectively suggest the distributed brain connectome disturbances maybe a neuroimaging biomarker in DMD patients with mild cognitive impairment.

Flow Electrode Capacitive Deionization System with Simultaneous Desalting of Na+ and Gathering of Na.

Oceans contain many freshwater resources and metal elements that people need, so the rational development of marine resources can solve the two major problems of shortage of freshwater resources and metal elements for people. To solve these two challenges, a system was designed to obtain freshwater resources and metallic elements simultaneously. An ion enrichment module was added to the conventional flow capacitor deionization system to collect metal elements while the seawater was deionized. A flowing electrode allows the metal elements to enter the flowing electrode through the desalination ability. It transports the metal elements to the enrichment module through the fluidity of the fluid while reducing the ion concentration at the flowing electrode, thus reducing the effect caused by the rejection of the same ion and collecting and enriching the metal elements. We purchased activated carbon to test the feasibility of the system with different mass fractions of activated carbon suspensions. The results showed that the elemental enrichment capacity of the system increased from 12.291 to 14.795 mg, and the enrichment rate increased from 13.536 to 16.294 mg cm-2 h-1 as the mass fraction of activated carbon increased. Thus, the system accomplished the goals of desalination and metal collection simultaneously.

Ovarian collision tumor consisting of sclerosing stromal tumor and mature cystic teratoma complicated with Meigs syndrome: A case report.

Ovarian collision tumors are uncommon and reports of their radiological appearance are even less frequent. The present study reported the world's first case of an ovarian collision tumor consisting of an ovarian sclerosing stromal tumor and a mature cystic teratoma and its imaging presentation. When a cystic solid ovarian mass combined with ascites and elevated CA125 is encountered it is frequently diagnosed as a malignant tumor, but the present case was a benign tumor. Therefore, when encountering similar cases, clinicians should not limit the diagnosis to malignant tumors to avoid rashly expanding the surgery and causing unnecessary harm to the patient. The combination of computed tomography, magnetic resonance imaging and pathology findings presented in the current study enable radiologists to learn about this disease and further assist clinicians in developing the best treatment plan.

Relationship between maternal exposure to heavy metal titanium and offspring congenital heart defects in Lanzhou, China: A nested case-control study.

Background: Previous studies have found that exposure to heavy metals increased the incidence of congenital heart defects (CHDs). However, there is a paucity of information about the connection between exposure to titanium and CHDs. This study sought to examine the relationship between prenatal titanium exposure and the risk of CHDs in offspring. Methods: We looked back on a birth cohort study that was carried out in our hospital between 2010 and 2012. The associations between titanium exposure and the risk of CHDs were analyzed by using logistic regression analysis to investigate titanium concentrations in maternal whole blood and fetal umbilical cord blood. Results: A total of 97 case groups and 194 control groups were included for a nested case-control study. The [P50 (P25, P75)] of titanium were 371.91 (188.85, 659.15) µg/L and 370.43 (264.86, 459.76) µg/L in serum titanium levels in pregnant women and in umbilical cord serum titanium content in the CHDs group, respectively. There was a moderate positive correlation between the concentration of titanium in pregnant women's blood and that in umbilical cord blood. A higher concentrations of maternal blood titanium level was associated with a greater risk of CHDs (OR 2.706, 95% CI 1.547-4.734), the multiple CHDs (OR 2.382, 95% CI 1.219-4.655), atrial septal defects (OR 2.367, 95% CI 1.215-4.609), and patent ductus arteriosus (OR 2.412, 95% CI 1.336-4.357). Dramatically higher concentrations of umbilical cord blood levels had an increased risk of CHDs and different heart defects. Conclusion: Titanium can cross the placental barrier and the occurrence of CHDs may be related to titanium exposure.

Protocol for using artificial lipid droplets to study the binding affinity of lipid droplet-associated proteins.

Here, we present a protocol to construct artificial lipid droplets to study the binding affinity of lipid droplet-associated proteins. We provide procedures to construct adiposomes and prepare recombinant lipid droplet-associated proteins. Then we describe approaches to measure the number density of perilipin 2 on natural lipid droplets, construct artificial lipid droplets, and determine the binding affinity of perilipin 2 on artificial lipid droplets. This protocol can be adapted to determine the binding properties of various lipid droplet-associated proteins. For complete details on the use and execution of this protocol, please refer to Ma et al. (2021).

Validating an artificial organelle: Studies of lipid droplet-specific proteins on adiposome platform.

New strategies are urgently needed to characterize the functions of the lipid droplet (LD). Here, adiposome, an artificial LD mimetic platform, was validated by comparative in vitro bioassays. Scatchard analysis found that the binding of perilipin 2 (PLIN2) to the adiposome surface was saturable. Phosphatidylinositol (PtdIns) was found to inhibit PLIN2 binding while it did not impede perilipin 3 (PLIN3). Structural analysis combined with mutagenesis revealed that the 73rd glutamic acid of PLIN2 is significant for the effect of PtdIns on the PLIN2 binding. Furthermore, adiposome was also found to be an ideal platform for in situ enzymatic activity measurement of adipose triglyceride lipase (ATGL). The significant serine mutants of ATGL were found to cause the loss of lipase activity. Our study demonstrates the adiposome as a powerful, manipulatable model system that mimics the function of LD for binding and enzymatic activity studies of LD proteins in vitro.

Construction of Nanodroplet/Adiposome and Artificial Lipid Droplets.

The lipid droplet (LD) is a cellular organelle that consists of a neutral lipid core with a monolayer-phospholipid membrane and associated proteins. Recent LD studies demonstrate its importance in metabolic diseases and biofuel development. However, the mechanisms governing its formation and dynamics remain elusive. Therefore, we developed an in vitro system to facilitate the elucidation of these mechanisms. We generated sphere-shaped structures with a neutral lipid core and a monolayer-phospholipid membrane by mechanically mixing neutral lipids and phospholipids followed by a two-step purification. We named the nanodroplet "adiposome". We then recruited LD structure-like/resident proteins to the adiposome, including the bacterial MLDS, Caenorhabditis elegans MDT-28/PLIN-1, or mammalian perilipin-2. In addition, adipose triglyceride lipase (ATGL) and apolipoprotein A1 (apo A-I) were recruited to adiposome. We termed the functional protein-coated adiposomes, Artificial Lipid Droplets (ALDs). With this experimental system, different proteins can be recruited to build ALDs for some biological goals and potential usage in drug delivery.