Combined effects of copper and cadmium exposure on ovarian function and structure in Nile Tilapia (Oreochromis niloticus).

With the rapid development of industrialization and urbanization, the issue of copper (Cu) and cadmium (Cd) pollution in aquatic ecosystems has become increasingly severe, posing threats to the ovarian tissue and reproductive capacity of aquatic organisms. However, the combined effects of Cu and Cd on the ovarian development of fish and other aquatic species remain unclear. In this study, female Nile tilapia (Oreochromis niloticus) were individually or co-exposed to Cu and/or Cd in water. Ovarian and serum samples were collected at 15, 30, 60, 90, and 120 days, and the bioaccumulation, ovarian development, and hormone secretion were analyzed. Results showed that both single and combined exposure significantly reduced the gonadosomatic index and serum hormone levels, upregulated estrogen receptor (er) and progesterone receptor (pr) gene transcription levels, and markedly affected ovarian metabolite levels. Combined exposure led to more adverse effects than single exposure. The data demonstrate that the Cu and Cd exposure can impair ovarian function and structure, with more pronounced adverse effects under Cu and Cd co-exposure. The Cu and Cd affect the metabolic pathways of nucleotides and amino acids, leading to ovarian damage. This study highlights the importance of considering combined toxicant exposure in aquatic toxicology research and provides insights into the potential mechanisms underlying heavy metal-induced reproductive toxicity in fish.

Bio-based epoxidized soybean oil branched cardanol ethers as compatibilizers of polybutylene succinate (PBS)/polyglycolic acid (PGA) blends.

Blending poly(butylene succinate) (PBS) with another biodegradable polymer, polyglycolic acid (PGA), has been demonstrated to improve the barrier performance of PBS. However, blending these two polymers poses a challenge because of their incompatibility and large difference of their melting temperatures. In this study, we synthesized epoxidized soybean oil branched cardanol ether (ESOn-ECD), a bio-based and environmentally friendly compatibilizer, and used it to enhance the compatibility of PBS/PGA blends. It was demonstrated that the terminal carboxyl/hydroxyl groups of PBS and PGA can react with ESOn-ECD in situ, leading to branching and chain extension of PBS and PGA. The addition of ESO3-ECD to the blend considerably diminished the dispersed phase of PGA. Specifically, in comparison to the PBS/PGA blend without a compatibilizer, the diameter of the PGA phase decreased from 2.04 µm to 0.45 µm after the addition of 0.7 phr of ESO3-ECD, and the boundary between the two phases became difficult to distinguish. Additionally, the mechanical properties of the blends were improved after addition of ESO3-ECD. This research expands the potential applications of these materials and promotes the use of bio-based components in blend formulations.

Effects of four hormones on the mitigation of ovarian damage in tilapia (Oreochromis niloticus) after copper and cadmium exposure.

Female tilapia of the Genetic Improvement of Farmed Tilapia (GIFT) strain were selected as an animal model to study the effects of four hormonal drugs in mitigating ovarian damage following exposure to copper and cadmium. After combined exposure to copper and cadmium in aqueous phase for 30 d, tilapia were randomly injected with oestradiol (E2), human chorionic gonadotropin (HCG), luteinizing hormone releasing hormone (LHRH), or coumestrol and raised in clear water for 7 d Ovarian samples were collected after combined exposure to heavy metals for 30 d and after recovery for 7 d Gonadosomatic index (GSI), copper and cadmium levels in the ovary, reproductive hormone levels in serum, and mRNA expression of key reproductive regulatory factors were determined. After 30 d of exposure to the combined copper and cadmium in aqueous phase, the Cd2+ content in tilapia ovarian tissue increased by 1,242.46% (p < 0.05), whereas the Cu2+ content, body weight, and GSI decreased by 68.48%, 34.46%, and 60.00% (p < 0.05), respectively. Additionally, E2 hormone levels in tilapia serum decreased by 17.55% (p < 0.05). After drug injection and recovery for 7 d, compared to the negative control group, the HCG group exhibited an increase of 39.57% (p < 0.05) in serum vitellogenin levels. Increases of 49.31%, 42.39%, and 45.91% (p < 0.05) in serum E2 levels were observed, and mRNA expression of 3ß-HSD increased by 100.64%, 113.16%, and 81.53% (p < 0.05) in the HCG, LHRH, and E2 groups, respectively. The mRNA expression of CYP11A1 in tilapia ovaries increased by 282.26% and 255.08% (p < 0.05) and mRNA expression of 17ß-HSD increased by 109.35% and 111.63% in the HCG and LHRH groups, respectively (p < 0.05). All four hormonal drugs, particularly HCG and LHRH, promoted the restoration of tilapia ovarian function to varying degrees after injury induced by combined exposure to copper and cadmium. This study presents the first hormonal treatment protocol for the mitigation of ovarian damage in fish exposed to combined aqueous phases of copper and cadmium as a strategy to prevent and treat fish ovarian damage induced by heavy metals.

Effects of Quercetin and Organically Modified Montmorillonite on the Properties of Poly(butylene adipate-co-terephthalate)/Thermoplastic Starch Active Packaging Films.

The poly(butylene adipate-co-terephthalate) (PBAT)/thermoplastic starch (TPS) film stands out owing to its acceptable price, low impact on the environment, and excellent mechanical properties. The main objective of this study was to improve the antioxidant properties of the PBAT/TPS film by incorporation of quercetin (Q) through the extrusion blow process. Another specific objective was to incorporate the organically modified montmorillonite (OMMT) to prolong the release of Q and improve the poor barrier properties of the PBAT/TPS/Q film. The films were analyzed in terms of their morphology, mechanical properties, gas and water barrier properties, and antioxidant and anti-UV properties. Optimization of the OMMT content resulted in a fiber-like, co-continuous morphology of the PBAT/TPS/Q film. The incorporation of quercetin enhanced the antioxidant and anti-UV properties of the PBAT/TPS film, while OMMT improved the mechanical properties, ultraviolet barriers, and gas and water barrier properties. The results show that the films incorporating Q and OMMT provided the oxygen and water barrier by up to 94 and 54%, respectively. Also, the amount of polymer required for 50% 2,2-diphenyl-1-picrylhydrazyl (DPPH) inhibition is as low as 0.03 g, and the UV transmission rate was reduced by about 50%. Moreover, PBAT/TPS/Q/OMMT films successfully delayed the decay of the banana and blueberry due to their excellent antioxidant properties and suitable water vapor permeability.

In Situ Formation of Microfibrillar PBAT in PGA Films: An Effective Way to Robust Barrier and Mechanical Properties for Fully Biodegradable Packaging Films.

Poly(glycolic acid) (PGA) is a semicrystalline biodegradable polyester with high gas barrier properties. However, due to its poor processability and low ductility, PGA could hardly find applications in the packaging field. Here, a strategy was adopted for in situ generation of high-aspect-ratio flexible microfibrils with strong interface affinity for the PGA matrix. Because poly(butylene adipate-co-terephthalate) (PBAT) possesses impressive ductility, it was selected as the "fibrillar toughening phase" to enhance the ductility of PGA. Moreover, a chain extender was used to enhance the interfacial adhesion between the two polymers. The extrusion blown film technique was then used to develop fully biodegradable PGA/PBAT films with a superior combination of excellent barrier performance and robust mechanical properties. The PBAT phase can in situ form microfibrils under the influence of extensional flow. Simultaneously, the synergetic function of the extensional flow field could effectively promote the motion of the PGA molecular chain to develop an oriented crystalline microstructure. Because of the aligned oriented lamellar crystal of PGA and oriented PBAT fibril structures serving as robust "barrier walls" 60PGA/ADR blown films demonstrated dramatically improved resistance to oxygen and water vapor, with 59 and 44 times lower oxygen permeability and water vapor permeability, respectively, when compared to the neat PBAT blown film. As a result, PGA/PBAT blown films offer a variety of benefits, including superior ductility, toughness, and a strong gas barrier property. The potential of these films to degrade makes them a viable contender for replacing classical nondegradable packing films.

Induction of Fetal Hemoglobin by Introducing Natural Hereditary Persistence of Fetal Hemoglobin Mutations in the γ-Globin Gene Promoters for Genome Editing Therapies for ß-Thalassemia.

Reactivation of γ-globin expression is a promising therapeutic approach for ß-hemoglobinopathies. Here, we propose a novel Cas9/AAV6-mediated genome editing strategy for the treatment of ß-thalassemia: Natural HPFH mutations -113A > G, -114C > T, -117G>A, -175T > C, -195C > G, and -198T > C were introduced by homologous recombination following disruption of BCL11A binding sites in HBG1/HBG2 promoters. Precise on-target editing and significantly increased γ-globin expression during erythroid differentiation were observed in both HUDEP-2 cells and primary HSPCs from ß-thalassemia major patients. Moreover, edited HSPCs maintained the capacity for long-term hematopoietic reconstitution in B-NDG hTHPO mice. This study provides evidence of the effectiveness of introducing naturally occurring HPFH mutations as a genetic therapy for ß-thalassemia.

Electronic metal-support interaction modulates single-atom platinum catalysis for hydrogen evolution reaction.

Tuning metal-support interaction has been considered as an effective approach to modulate the electronic structure and catalytic activity of supported metal catalysts. At the atomic level, the understanding of the structure-activity relationship still remains obscure in heterogeneous catalysis, such as the conversion of water (alkaline) or hydronium ions (acid) to hydrogen (hydrogen evolution reaction, HER). Here, we reveal that the fine control over the oxidation states of single-atom Pt catalysts through electronic metal-support interaction significantly modulates the catalytic activities in either acidic or alkaline HER. Combined with detailed spectroscopic and electrochemical characterizations, the structure-activity relationship is established by correlating the acidic/alkaline HER activity with the average oxidation state of single-atom Pt and the Pt-H/Pt-OH interaction. This study sheds light on the atomic-level mechanistic understanding of acidic and alkaline HER, and further provides guidelines for the rational design of high-performance single-atom catalysts.

Atom by Atom Condensation of Sn Single Clusters within Gold-Phosphorus Metal-Inorganic Porous Networks.

Surface supported single-atom catalysts (SACs) and single-cluster catalysts (SCCs) have been an area of rapidly growing interest due to their high efficiency of metal atom utilization and high selectivity and activity toward various catalytic reactions. However, achieving highly dispersed, structurally well-defined SACs and SCCs with high surface loadings while avoiding their sintering to larger nanoparticles (NPs) still remains a nontrivial challenge. Here, by utilizing a recently fabricated porous metal-inorganic gold-phosphorus (AuP) network, highly dispersed single Sn clusters with high surface density can be realized. This is attributed to a synergistic effect of the P6Au6 pores for providing the preferential binding sites to anchor Sn atoms and the role of P9 units as a blocking barrier to prevent the growth of Sn to larger NPs. The atom by atom condensation process of Sn single clusters with sizes ranging from monomers to heptamers as well as their binding configurations with the supporting surface are precisely identified at the atomic level, through the combination of a low-temperature scanning tunneling microscope and density functional theory calculations. Our approach opens new opportunities of utilizing metal-inorganic porous networks for the stabilization of highly dispersed and well-defined SACs and SCCs.

Realization of a Buckled Antimonene Monolayer on Ag(111) via Surface Engineering.

The degree of buckling of two-dimensional (2D) materials can have a dramatic impact on their corresponding electronic structures. Antimonene (ß-phase), a new 2D material with air stability and promising electronic properties, has been engineered to adopt flat or two-heights-buckling geometries by employing different supporting substrates for epitaxial growth. However, studies of the antimonene monolayer with a more buckled configuration are still lacking. Here, we report the synthesis of an antimonene monolayer with a three-heights-buckling configuration overlaid on SbAg2 surface alloy-covered Ag(111) by molecular beam epitaxy, in which the underlying surface alloy provides interfacial interactions to modulate the structure of the antimonene monolayer. The atomic structure of the synthesized antimonene has been precisely identified through a combination of low-temperature scanning tunneling microscopy and density functional theory calculations. The successful fabrication of a buckled antimonene monolayer could provide a promising way to modulate the structures of 2D materials for future electronic and optoelectronic applications.

Designing Kagome Lattice from Potassium Atoms on Phosphorus-Gold Surface Alloy.

Materials with flat bands are considered as ideal platforms to explore strongly correlated physics such as the fractional quantum hall effect, high-temperature superconductivity, and more. In theory, a Kagome lattice with only nearest-neighbor hopping can give rise to a flat band. However, the successful fabrication of Kagome lattices is still very limited. Here, we provide a new design principle to construct the Kagome lattice by trapping atoms into Kagome arrays of potential valleys, which can be realized on a potassium-decorated phosphorus-gold surface alloy. Theoretical calculations show that the flat band is less correlated with the neighboring trivial electronic bands, which can be further isolated and dominate around the Fermi energy with increased Kagome lattice parameters of potassium atoms. Our results provide a new strategy for constructing Kagome lattices, which serve as an ideal platform to study topological and more general flat band phenomena.

Molecular-Scale Investigation of the Thermal and Chemical Stability of Monolayer PTCDA on Cu(111) and Cu(110).

Perylene-3,4,9,10-tetracarboxylic dianhydride (PTCDA) has been intensively investigated for decades because of its unique electronic and optical properties and its applications in organic electronics and surface engineering and passivation of 2D materials. Recently, the high demand for achieving selective area deposition in device fabrications drives the research of utilizing organic molecules as a passivation layer on metals in the semiconductor industry. PTCDA molecules show promising potential to be used as a passivation layer on a metal surface because of their ability to form self-assembled compact lying-down layers with the well-exposed inert conjugated molecular π-plane. However, the thermal and chemical stabilities of monolayer PTCDA on metal surfaces have not been thoroughly studied. In this paper, we demonstrate that monolayer PTCDA on Cu(110) and Cu(111) surfaces exhibit good thermal and chemical stabilities, as revealed through the combination of in situ X-ray photoelectron spectroscopy and in situ low-temperature scanning tunneling microscopy measurements. We show that monolayer PTCDA on copper is stable up to 220 °C and decomposes to perylene at higher temperature. Monolayer PTCDA also shows good chemical stability when exposed to O2 and water, demonstrating good potential for its future applications as passivation layers in selective area deposition.

Synthesis of Monolayer Blue Phosphorus Enabled by Silicon Intercalation.

The growth of entirely synthetic two-dimensional (2D) materials could further expand the library of naturally occurring layered solids and provide opportunities to design materials with finely tunable properties. Among them, the synthesis of elemental 2D materials is of particular interest as they represent the chemically simplest case and serve as a model system for exploring the on-surface synthesis mechanism. Here, a pure atomically thin blue phosphorus (BlueP) monolayer is synthesized via silicon intercalation of the BlueP-Au alloy on Au(111). The intercalation process is characterized at the atomic scale by low-temperature scanning probe microscopy and further corroborated by synchrotron radiation-based X-ray photoelectron spectroscopy measurements. The evolution of the band structures from the BlueP-Au alloy into Si-intercalated BlueP are clearly revealed by angle-resolved photoemission spectroscopy and further verified by density functional theory calculations.

Reversible Oxidation of Blue Phosphorus Monolayer on Au(111).

Practical applications of two-dimensional (2D) black phosphorus (BP) are limited by its fast degradation under ambient conditions, for which many different mechanisms have been proposed; however, an atomic level understanding of the degradation process is still hindered by the absence of bottom-up methods for the growth of large-scale few-layer black phosphorus. Recent experimental success in the fabrication of single-layer blue phosphorus provides a model system to probe the oxidation mechanism of two-dimensional (2D) phosphorene down to single-layer thicknesses. Here, we report an atomic-scale investigation of the interaction between molecular oxygen and blue phosphorus. The atomic structure of blue phosphorus and the local binding sites of oxygen have been precisely identified using qPlus-based noncontact atomic force microscopy. A combination of low-temperature scanning tunneling microscopy and X-ray photoelectron spectroscopy measurements reveal a thermally reversible oxidation process of blue phosphorus in a pure oxygen atmosphere. Our study clearly demonstrates the essential role of oxygen in the initial oxidation process, and it sheds further light on the fundamental pathways of the degradation mechanism.

In situ spectroscopy-guided engineering of rhodium single-atom catalysts for CO oxidation.

Single-atom catalysts have recently been applied in many applications such as CO oxidation. Experimental in situ investigations into this reaction, however, are limited. Hereby, we present a suite of operando/in situ spectroscopic experiments for structurally well-defined atomically dispersed Rh on phosphotungstic acid during CO oxidation. The identification of several key intermediates and the steady-state catalyst structure indicate that the reactions follow an unconventional Mars-van Krevelen mechanism and that the activation of O2 is rate-limiting. In situ XPS confirms the contribution of the heteropoly acid support while in situ DRIFT spectroscopy consolidates the oxidation state and CO adsorption of Rh. As such, direct observation of three key components, i.e., metal center, support and substrate, is achieved, providing a clearer picture on CO oxidation on atomically dispersed Rh sites. The obtained information are used to engineer structurally similar catalysts that exhibit T20 values up to 130 °C below the previously reported Rh1/NPTA.

Growth of Quasi-Free-Standing Single-Layer Blue Phosphorus on Tellurium Monolayer Functionalized Au(111).

Blue phosphorus, a newly proposed allotrope of phosphorus, represents a promising 2D material with predicted large tunable band gap and high charge-carrier mobility. Here, we report a simple method for the growth of quasi-free-standing single layer blue phosphorus on tellurium functionalized Au(111) by using black phosphorus as the precursor. In situ low-temperature scanning tunneling microscopy (LT-STM) measurements were used to monitor the growth of the single-layer blue phosphorus, which forms triangular structures arranged hexagonally on the tellurium layer. As revealed by in situ X-ray photoelectron spectroscopy, LT-STM measurements, and density functional theory calculation, the blue phosphorus layer weakly interacts with the underlying tellurium layer.