RESUMEN
Introduction: Aptamers are a brand-new class of receptors that can be exploited to improve the bioactivity of tissue engineering grafts. The aim of this work was to revise the current literature on in vitro and in vivo studies in order to i) identify current strategies adopted to improve scaffold bioactivity by aptamers; ii) assess effects of aptamer functionalization on cell behavior and iii) on tissue regeneration. Methods: Using a systematic search approach original research articles published up to 30 April 2022, were considered and screened. Results: In total, 131 records were identified and 18 were included in the final analysis. Included studies showed that aptamers can improve the bioactivity of biomaterials by specific adsorption of adhesive molecules or growth factors from the surrounding environment, or by capturing specific cell types. All the studies showed that aptamers ameliorate scaffold colonization by cells without modifying the physicochemical characteristics of the bare scaffold. Additionally, aptamers seem to promote the early stages of tissue healing and to promote anatomical and functional regeneration. Discussion: Although a metanalysis could not be performed due to the limited number of studies, we believe these findings provide solid evidence supporting the use of aptamers as a suitable modification to improve the bioactivity of tissue engineering constructs.
RESUMEN
The study of the intimate connection occurring at the interface between cells and titanium implant surfaces is a major challenge for dental materials scientists. Indeed, several imaging techniques have been developed and optimized in the last decades, but an optimal method has not been described yet. The combination of the scanning electron microscopy (SEM) with a focused ion beam (FIB), represents a pioneering and interesting tool to allow the investigation of the relationship occurring at the interface between cells and biomaterials, including titanium. However, major caveats concerning the nature of the biological structures, which are not conductive materials, and the physico-chemical properties of titanium (i.e. color, surface topography), require a fine and accurate preparation of the sample before its imaging. Hence, the aim of the present work is to provide a suitable protocol for cell-titanium sample preparation before imaging by SEM-FIB. The concepts presented in this paper are also transferrable to other fields of biomaterials research.
Asunto(s)
Materiales Biocompatibles , Titanio , Materiales Biocompatibles/química , Adhesión Celular , Microscopía Electrónica de Rastreo , Prótesis e Implantes , Propiedades de Superficie , Titanio/químicaRESUMEN
Amorphous silica nanoparticles (ASNP) are present in a variety of products and their biological effects are actively investigated. Although several studies have documented pro-inflammatory effects of ASNP, the possibility that they also modify the response of innate immunity cells to natural activators has not been thoroughly investigated. Here, we study the effects of pyrogenic ASNP on the LPS-dependent activation of human macrophages differentiated from peripheral blood monocytes. In macrophages, 24 h of pre-exposure to non-cytotoxic doses of ASNP markedly inhibited the LPS-dependent induction of pro-inflammatory (TNFα, IL-6) and anti-inflammatory cytokines (IL-10). The inhibitory effect was associated with the suppression of NFκB activation and the increased intracellular sequestration of the TLR4 receptor. The late induction of glutamine synthetase (GS) by LPS was also prevented by pre-exposure to ASNP, while GS silencing did not interfere with cytokine secretion. It is concluded that (i) macrophages exposed to ASNP are less sensitive to LPS-dependent activation and (ii) GS induction by LPS is likely secondary to the stimulation of cytokine secretion. The observed interference with LPS effects may point to a dampening of the acute inflammatory response after exposure to ASNP in humans.
RESUMEN
The use of alloplastic materials in periodontal regenerative therapies is limited by their incapacity to establish a dynamic dialog with the surrounding milieu. The aim of the present study was to control biomaterial surface bioactivity by introducing aptamers to induce the selective adsorption of fibronectin from blood, thus promoting platelets activation in vitro and bone regeneration in vivo. A hyaluronic acid/polyethyleneglycole-based hydrogel was enriched with aptamers selected for recognizing and binding fibronectin. In vitro, the capacity of constructs to support osteoblast adhesion, as well as platelets aggregation and activation was assessed by chemiluminescence within 24 h. Matrices were then evaluated in a rat periodontal defect to assess their regenerative potential by microcomputed tomography (µCT) and their osteogenic capacity by Luminex assay 5, 15 and 30 d postoperatively. Aptamers were found to confer matrices the capacity of sustaining firm cell adhesion (p = 0.0377) and to promote platelets activation (p = 0.0442). In vivo, aptamers promoted new bone formation 30 d post-operatively (p < 0.001) by enhancing osteoblastic lineage commitment maturation. Aptamers are a viable surface modification, which confers alloplastic materials the potential capacity to orchestrate blood clot formation, thus controlling bone healing.
Asunto(s)
Aptámeros de Péptidos/metabolismo , Materiales Biocompatibles/metabolismo , Fibronectinas/metabolismo , Periodoncio/fisiología , Animales , Regeneración Ósea/fisiología , Adhesión Celular/fisiología , Diferenciación Celular , Células Cultivadas , Humanos , Técnicas In Vitro , Masculino , Ensayo de Materiales , Osteoblastos/citología , Osteoblastos/fisiología , Osteogénesis/fisiología , Periodoncio/diagnóstico por imagen , Periodoncio/lesiones , Activación Plaquetaria/fisiología , Ratas , Ratas Endogámicas WKY , Propiedades de Superficie , Microtomografía por Rayos XRESUMEN
In vitro studies have consistently shown that titanium surface wettability affects the response of osteoprogenitors, leading to important advances in the clinical osseointegration of dental implants. However, the underlying molecular mechanisms remain unknown. Since surface conditioning by blood components initiates within milliseconds after insertion, it is reasonable to hypothesize that the amount and the type of blood proteins adsorbed influences the interaction between the implant surface and osteoprogenitors. To test this hypothesis, titanium implant surfaces with different characteristics, in terms of topography and wettability, have been conditioned with selected plasma proteins. Pure fibronectin (HFN) and albumin (HSA) solutions, or their mixture at the relative plasma concentrations were allowed to adsorb on titanium surfaces for 60 min. Protein adsorption was monitored by Bradford assay, while the contribution of HSA and HFN in forming the microfilm layer at the interface was studied by Western Blot. Subsequently, the same protein-conditioned surfaces were used to culture C2C12 cells, thus studying their capacity to adhere and to spread after 3 h. Cell viability was evaluated up to 7 days, while the expression of osteogenic genes was assessed after 3 days. Under competitive adsorption conditions, hydrophilicity promotes the selectivity of titanium for HFN regardless of the surface microtopography. As a consequence of selective HFN adsorption, cells on hydrophilic surfaces displayed enhanced adhesion and spreading, as well as increased proliferation. On the other hand, selective HFN adsorption did not appreciably affect cell differentiation. These data suggest that implant surface hydrophilicity plays a key role in guiding the selective adsorption of specific proteins from blood plasma. Moreover, the selective adsorption of HFN, as a consequence of surface hydrophilicity, was found to account for early cell responses amelioration. Thus, titanium surface hydrophilicity contributes to the clinical success of dental implant by selectively controlling protein adsorption at the interface.
Asunto(s)
Implantes Dentales , Titanio , Adsorción , Albúminas , Fibronectinas , Interacciones Hidrofóbicas e Hidrofílicas , Propiedades de SuperficieRESUMEN
BACKGROUND: Calcium ions levels in bone niches have been demonstrated to severely influence new bone formation. Osteoinductive scaffolds containing calcium have been largely studied to control the release of calcium in bone regeneration and tissue engineering purpose. The aim of the present study was, firstly, to synthesize two different resorbable calcium phosphate-based powders, thought to be reservoirs of calcium ions, and secondary, to investigate their effects on human osteoblasts, in order to develop a suitable titanium coating material. METHODS: Tetracalcium phosphate (A450) and biphasic tetracalcium phosphatae/tricalcium phosphate (A850) powders were prepared with an innovative method. The presence of calcium phosphate structures was chemically confirmed with XRD. Furthermore, powders macroscopic aspect was observed with a stereomicroscope. For in-vitro experiments, human osteoblastic cells were cultured in the presence of A450 and A850, and assayed for viability and metabolic activity through Crystal Violet and MTT, respectively. RESULTS: Our synthesis led to the formation of calcium phosphates in both samples, even though A850 presented a higher level of crystallinity and a more powdery aspects than A450. Both the samples enhanced the viability of cultured cells, inhibiting cell metabolic activity in the case of A850, which furthermore showed to be internalized by cells. CONCLUSIONS: We developed two different kind of calcium phosphate-based powders and we tested their effect on human osteoblasts, underlying the possibility of use calcium phosphate-based coatings to enhance cell response on implantable materials.
Asunto(s)
Fosfatos de Calcio , Osteoblastos , Humanos , Polvos , Difracción de Rayos XRESUMEN
Titanium surface characteristics, including microtopography, chemical composition, and wettability, are essential features to achieve osseointegration of dental implants, but the choice of a particular surface topography is still a debated topic among clinicians. An increased level of implant surface hydrophilicity has been demonstrated to ameliorate osseointegration and shorten healing times. The aim of this work is to develop and test a suitable thermal-based method to enhance titanium surface wettability without modifying other characteristics of the implant surface. For this function, titanium discs with different surface topography have been thermally treated by testing different temperatures and excluding those that led to evident chromatic and morphological modifications. The selected surface gain in wettability after the treatment was assessed through contact angle measurement, chemistry modifications through x-ray photoelectron spectroscopy (XPS) analysis, and microtopography through scanning electron microscopy (SEM). Results showed a great enhancement in hydrophilicity on the tested surfaces without any other modification in terms of surface chemical composition and topography. A possible limitation of this method could be the persistent, although relatively slow, biological aging of the surfaces after the treatment. The present findings indicate that the described treatment could be a safe and effective method to enhance dental titanium hydrophilicity and thus its biological performance.
Asunto(s)
Implantes Dentales , Interacciones Hidrofóbicas e Hidrofílicas , Microscopía Electrónica de Rastreo , Oseointegración , Propiedades de Superficie , TitanioRESUMEN
The bioactivity of biomaterials is closely related to cell response in contact with them. However, shortly after their insertion, materials are soon covered with proteins that constitute the biological fluids, and which render the direct surface recognition by cells almost impossible. The control of protein adsorption at the interface is therefore desirable. Extracellular matrix proteins are of particular interest in this sense, due to their well-known ability to modulate cell behavior. Particularly, fibronectin plays a leading role, being present in both healthy and injured tissues undergoing healing and regeneration. The aim of the present work is to give an overview on fibronectin and on its involvement in the control of cell behavior providing evidence of its pivotal role in the control of cell adhesion, spreading, migration, proliferation and differentiation. A deep insight into methods to enrich biomaterials surface with fibronectin will be then discussed, as well as new cues on the possibility to design tailored platforms able to specifically retain fibronectin from the surrounding extracellular milieu.
RESUMEN
OBJECTIVES: To investigate how a thermal treatment to increase titanium wettability influences proteins adsorption from blood serum and osteoblasts responses. METHODS: Titanium discs with machined or micro-rough profiles were thermally treated to obtain hydrophilic surfaces. The adsorption kinetics of two representative serum proteins were determined by Bradford assay, while the stable protein adsorption pattern from blood serum was investigated by SDS-PAGE and Western Blot analysis. Subsequently, MC3T3-E1 cells were cultured on titanium for 24h and assayed for adhesion and morphology. RESULTS: Thermally-induced hydrophilicity dramatically improved the capacity of titanium to selectively adsorb fibronectin and fibrinogen from blood serum, without evident influence on other representative serum proteins. The selective adsorption of fibronectin was linked to the improved capacity of MC3T3-E1 cells to adhere and spread on hydrophilic surfaces. SIGNIFICANCE: We identified a potential method to improve selective protein adsorption on titanium by enhancing implant surface wettability through a thermal treatment. Selective fibronectin adsorption was further indicated as the responsible for improved osteoblasts adhesion. Targeting specific cell response by selective protein adsorption appears to be crucial to conceive even more performant therapies.
Asunto(s)
Adhesión Celular , Titanio/química , Actinas/química , Actinas/metabolismo , Adsorción , Animales , Línea Celular , Fibrinógeno/química , Fibronectinas/química , Ratones , Microscopía Fluorescente , Osteoblastos/citología , Osteoblastos/metabolismo , Propiedades de Superficie , HumectabilidadRESUMEN
Surface topography is one of the main factors controlling cell responses on implanted devices and a proper definition of the characteristics that optimize cell behavior may be crucial to improve the clinical performances of these implants. Substrate geometry is known to affect cell shape, as cells try to optimize their adhesion by adapting to the irregularities beneath, and this in turn profoundly affects their activity. In the present study, we cultured murine calvaria MC3T3-E1 cells on surfaces with pillars arranged as hexagons with two different spacings and observed their morphology during adhesion and growth. Cells on these highly ordered substrates attached and proliferated effectively, showing a marked preference for minimizing the inter-pillar distance, by following specific pathways across adjacent pillars and displaying consistent morphological modules. Moreover, cell behavior appeared to follow tightly controlled patterns of extracellular protein secretion, which preceded and matched cells and, on a sub-cellular level, cytoplasmic orientation. Taken together, these results outline the close integration of surface features, extracellular proteins alignment and cell arrangement, and provide clues on how to control and direct cell spatial order and cell morphology by simply acting on inter-pillar spacing.
RESUMEN
The host-material interface is a crucial relationship dictating the possibility of successful osseointegration in implant dentistry. The aim of the present study was to characterize the effects of plasma proteins pre-adsorption on the adhesion capacity of osteoblasts, which occurs immediately after implant insertion in vivo. After having pre-adsorbed human plasma proteins on a machined and microrough titanium surface, MC3T3-E1 osteoblasts adhesion was evaluated through crystal violet cell adhesion assay, immunofluorescence staining for cytoskeleton, focal adhesions and cell nuclei, and scanning electron microscopy. The pre-adsorbed protein layer markedly affected the adhesion rate of cells, as well as their morphology and the expression of focal contacts. Moreover, protein adsorption to the underlying titanium surface was found to be correlated to surface pre-wetting. Thus, the early adsorption of serum proteins to the interface of dental implants impacts cell adhesion in terms of strength and of focal adhesions expression.
RESUMEN
Periodontitis is an inflammatory condition that can induce significant destruction of the periodontium, the set of specialized tissues that provide nourishment and support to the teeth. According to the guided tissue regeneration principles, the periodontium can be regenerated if the spatiotemporal control of wound healing is obtained, namely the tune control of cell response. After material implantation, protein adsorption at the interface is the first occurring biological event, which influences subsequent cell response. With the regard of this, we hypothesize that the control of selective adsorption of biological cues from the surrounding milieu may be a key-point to control selective cell colonization of scaffolds for periodontal tissue regeneration.
Asunto(s)
Materiales Biocompatibles/química , Periodontitis/metabolismo , Periodontitis/terapia , Proteínas/química , Regeneración , Adsorción , Animales , Proteínas Sanguíneas/química , Modelos Animales de Enfermedad , Humanos , Inflamación , Ligamento Periodontal , Andamios del Tejido , Cicatrización de HeridasRESUMEN
Robust cell adhesion is known to be necessary to promote cell colonization of biomaterials and differentiation of progenitors. In this paper, we propose the functionalization of Silicon Oxycarbide (SiOxCy) nanowires (NWs) with 3-mercaptopropyltrimethoxysilane (MPTMS), a molecule containing a terminal -SH group. The aim of this functionalization was to develop a surface capable to adsorb proteins and promote cell adhesion, proliferation and a better deposition of extracellular matrix. This functionalization can be used to anchor other structures such as nanoparticles, proteins or aptamers. It was observed that surface functionalization markedly affected the pattern of protein adsorption, as well as the in vitro proliferation of murine osteoblastic cells MC3T3-E1, which was increased on functionalized nanowires (MPTMS-NWs) compared to bare NWs (control) (p < 0.0001) after 48 h. The cells showed a better adhesion on MPTMS-NWs than on bare NWs, as confirmed by immunofluorescence studies on the cytoskeleton, which showed a more homogeneous vinculin distribution. Gene expression analysis showed higher expression levels for alkaline phosphatase and collagen I, putative markers of the osteoblast initial differentiation stage. These results suggest that functionalization of SiOxCy nanowires with MPTMS enhances cell growth and the expression of an osteoblastic phenotype, providing a promising strategy to improve the biocompatibility of SiOxCy nanowires for biomedical applications.
Asunto(s)
Adhesión Celular/efectos de los fármacos , Nanocables/química , Osteoblastos/efectos de los fármacos , Compuestos de Silicona/farmacología , Compuestos de Sulfhidrilo/farmacología , Andamios del Tejido/química , Animales , Diferenciación Celular/efectos de los fármacos , Proliferación Celular/efectos de los fármacos , Supervivencia Celular/efectos de los fármacos , Células Cultivadas , Ensayo de Materiales , Ratones , Nanocables/efectos adversos , Compuestos de Organosilicio , Osteoblastos/citología , Osteoblastos/fisiología , Osteogénesis/efectos de los fármacos , Espectroscopía de Fotoelectrones , Silanos/química , Silanos/farmacología , Compuestos de Silicona/química , Compuestos de Sulfhidrilo/química , Propiedades de Superficie , Andamios del Tejido/efectos adversosRESUMEN
A decisive step in cell-biomaterial interaction is represented by the adsorption of proteins at the interface, whose fine control may be useful to trigger proper cell response. To this purpose, we can selectively control protein adsorption on biomaterials by means of aptamers. Aptamers selected to recognize fibronectin dramatically enhance chitosan ability to promote cell proliferation and adhesion, but the underlying biological mechanism remains unknown. We supposed that aptamers contributed to ameliorate the adsorption of fibronectin in an advantageous geometrical conformation for cells, thus regulating their morphology by the proper activation of the integrin-mediated pathway. We investigated this possibility by culturing epithelial cells on chitosan enriched with increasing doses of aptamers in the presence or in the absence of cytoskeleton pharmacological inhibitors. Our results showed that aptamers control cell morphology in a dose dependent manner (p < 0.0001). Simultaneously, when the inhibition of actin polymerization was induced, the control of cell morphology was attenuated (p < 0.0001), while no differences were detected when cells contractility was challenged (p > 0.05). Altogether, our data provide evidence that aptamers contribute to control fibronectin adsorption on biomaterials by preserving its conformation and thus function. Furthermore, our work provides a new insight into a new way to accurately tailor material surface bioactivity.
RESUMEN
Tissue engineering (TE) is a multidisciplinary science, which including principles from material science, biology and medicine aims to develop biological substitutes to restore damaged tissues and organs. A major challenge in TE is the choice of suitable biomaterial to fabricate a scaffold that mimics native extracellular matrix guiding resident stem cells to regenerate the functional tissue. Ideally, the biomaterial should be tailored in order that the final scaffold would be (i) biodegradable to be gradually replaced by regenerating new tissue, (ii) mechanically similar to the tissue to regenerate, (iii) porous to allow cell growth as nutrient, oxygen and waste transport and (iv) bioactive to promote cell adhesion and differentiation. With this perspective, this review discusses the options and challenges facing biomaterial selection when a scaffold has to be designed. We highlight the possibilities in the final mold the materials should assume and the most effective techniques for its fabrication depending on the target tissue, including the alternatives to ameliorate its bioactivity. Furthermore, particular attention has been given to the influence that all these aspects have on resident cells considering the frontiers of materiobiology. In addition, a focus on chitosan as a versatile biomaterial for TE scaffold fabrication has been done, highlighting its latest advances in the literature on bone, skin, cartilage and cornea TE.
RESUMEN
The aim of the study was to investigate cell adhesion to micro-structured titanium. Osteoblastic MC3T3 cells were cultured on smooth (P) or sand-blasted/acid-etched (SLA) titanium discs and were observed at scanning electron microscope/focused ion beam (SEM/FIB). Myosin II and actin microfilaments were labelled for epifluorescence microscopy. FIB revealed that cell adhesion initiated centrally and expanded to the cell periphery and that cells attached on the substrate by bridging over the titanium irregularities and adhering mostly on surface peaks. Gaps were visible between concave areas and cytoplasm and areas around ridges represented preferred attachment points for cells. A different myosin distribution was observed between samples and myosin inhibition affected cell responses. Taken together our data indicate that cells attach on micro-rough titanium by bridging over its irregularities. This is likely mediated by myosin II, whose distribution is altered in cells on SLA discs.
Asunto(s)
Adhesión Celular/efectos de los fármacos , Osteoblastos/citología , Titanio/farmacología , Grabado Ácido Dental , Supervivencia Celular/efectos de los fármacos , Células Cultivadas , Microscopía Electrónica de Rastreo , Microscopía Fluorescente , Propiedades de Superficie , Factores de TiempoRESUMEN
OBJECTIVES: The goal of this study was to evaluate bone changes around endosseous implants in partially edentulous patients. MATERIALS AND METHODS: A total of 632 two-stage implants were placed in 252 patients. The implants had straight emergence profile, ZirTi surface, 3.3 to 5 mm diameter, and 8.5 to 13 mm length. Bone levels were assessed on orthopantomography immediately after surgery and after 36 months and marginal bone loss (MBL) was calculated from their difference. RESULTS: Cumulative survival rate was 98.73%. Overall MBL was 0.8 mm ± 0.03 (mean ± SEM). Higher MBL was observed around implants in the maxilla than in the mandible (P < 0.007). A relation between implant diameter and MBL (P < 0.0001) was observed in male and, more limitedly, female patients. Older patients had higher MBL in the maxilla, but not in the mandible (P < 0.0001). MBL progressively increased with age in male patients, but reached a peak already in the 50-60 years age group in the female subset (P < 0.001). CONCLUSIONS: The overall MBL is consistent with the available literature. Site difference and patient age and gender appear to significantly affect MBL, representing important factors to be considered during implant placement.
Asunto(s)
Pérdida de Hueso Alveolar/epidemiología , Implantación Endodóntica Endoósea/instrumentación , Implantación Endodóntica Endoósea/estadística & datos numéricos , Implantes Dentales de Diente Único/estadística & datos numéricos , Adaptación Marginal Dental , Arcada Parcialmente Edéntula/epidemiología , Arcada Parcialmente Edéntula/cirugía , Distribución por Edad , Pérdida de Hueso Alveolar/diagnóstico por imagen , Causalidad , Comorbilidad , Fracaso de la Restauración Dental/estadística & datos numéricos , Femenino , Humanos , Incidencia , Italia/epidemiología , Arcada Parcialmente Edéntula/diagnóstico por imagen , Masculino , Persona de Mediana Edad , Complicaciones Posoperatorias/diagnóstico por imagen , Complicaciones Posoperatorias/epidemiología , Radiografía , Factores de Riesgo , Distribución por Sexo , Resultado del TratamientoRESUMEN
TRIAL DESIGN: This analysis compared the outcome of fresh-frozen versus autologous bone block grafts for horizontal ridge augmentation in patients with Cawood and Howell class IV atrophies. METHODS: Seventeen patients received autologous grafts and 21 patients received fresh-frozen bone grafts. Patients underwent CT scans 1 week and 6 months after surgery for graft volume and density analysis. RESULTS: Two autologous and 3 fresh-frozen grafts failed. Autologous and fresh-frozen grafts lost, respectively, 28% and 46% of their initial volume (P = 0.028). It is noteworthy that less dense fresh-frozen blocks lost more volume than denser grafts (61% versus 16%). CONCLUSIONS: According to these 6-month results, only denser fresh-frozen bone graft may be an acceptable alternative to autologous bone for horizontal ridge augmentation. Further studies are needed to investigate its behaviour at longer time points.
Asunto(s)
Proceso Alveolar/patología , Proceso Alveolar/trasplante , Densidad Ósea , Resorción Ósea/patología , Trasplante Óseo , Secciones por Congelación , Adulto , Femenino , Humanos , Masculino , Persona de Mediana Edad , Trasplante Autólogo , Adulto JovenRESUMEN
OBJECTIVES: Phosphoserine-based functionalization has been proposed as a tool to improve integration of endosseous implants by promoting osteoblast adhesion and differentiation in vitro. The present work investigates whether phosphoserine-tethered poly(epsilon-lysine) dendrons, when applied as a film to titanium surfaces, enhance the differentiation of osteoblastic cells and the activation of Wnt/ß-catenin signaling. MATERIALS AND METHODS: These films were tested in a murine model of calvaria-derived MC3T3 osteoblastic cells, primary bone marrow cells and mesenchymal, undifferentiated C2C12 cells. Gene expression was assayed by Real Time PCR, and activation of Wnt signaling pathway was measured with a reporter assay. RESULTS: Dendrons increased expression of alkaline phosphatase and osteocalcin, two osteoblastic markers, in both murine osteoblastic MC3T3 cells and primary bone marrow cells. The expression of osteoprotegerin, a protein opposing osteoclastogenesis was also significantly higher in cells growing on dendron-coated substrates both at 3 and 6 days of culture. Similarly, the mRNA levels of Wisp-2 and of ß-catenin, two Wnt target genes, were also markedly increased in this group at day 6. The activation of this signaling pathway in cells growing on the dendron-coated surfaces was confirmed by use of a TCF/ß-catenin reporter system in the C2C12 cell line. CONCLUSIONS: The findings of the present study show that phosphoserine-tethered poly(epsilon-lysine) dendron films act as stimuli for the activation of specific signal cascades and promote the differentiation of adhering progenitor cells into an osteoblastic phenotype.
Asunto(s)
Biomimética , Materiales Biocompatibles Revestidos , Dendrímeros/farmacología , Lisina/farmacología , Osteoblastos/fisiología , Fosfoserina/farmacología , Titanio/farmacología , Vía de Señalización Wnt/fisiología , Grabado Ácido Dental , Fosfatasa Alcalina/metabolismo , Animales , Biomarcadores/metabolismo , Adhesión Celular , Diferenciación Celular , Células Cultivadas , Cromatografía Líquida de Alta Presión , Espectrometría de Masas , Ratones , Microscopía Electrónica de Rastreo , Osteocalcina/metabolismo , Reacción en Cadena en Tiempo Real de la Polimerasa , Transducción de Señal/fisiología , Propiedades de SuperficieRESUMEN
INTRODUCTION: Mini-implants are used to improve orthodontic anchorage, but optimal composition and surface characteristics have yet to be determined. We investigated the behavior of osteoblast-like cells on grade 4 commercially pure titanium and grade 5 titanium alloy with different surface treatments for mini-implants. METHODS: MC3T3 cells were plated on machined, acid-etched, or acid-etched grade 4 titanium enriched with calcium phosphate, or machined, anodized, or anodized and calcium phosphate-enriched grade 5 titanium disks. Surface and cell morphologies were assessed by scanning electron microscopy. Cell viability was measured by chemiluminescence, cytoskeletal organization was investigated by immunofluorescence, and real-time polymerase chain reaction for osteoblast-specific genes was performed to measure cell differentiation. RESULTS: Flattened shapes and strong stress fibers were observed on the machined surfaces; cells on the rough surfaces had a spindle shape, with lower cytoskeletal polarization. Cell proliferation was highest on smooth grade 4 titanium surfaces, whereas cells quickly reached a plateau on rough grade 4 titanium; no difference was observed after 72 hours in the grade 5 titanium groups. Calcium phosphate enrichment on grade 4 titanium significantly increased the messenger RNA levels for alkaline phosphatase and osteocalcin. Osteoblastic markers were higher on the grade 5 titanium machined surfaces than on the rough surfaces, and comparable with acid-etched grade 4 titanium. CONCLUSIONS: Although the grade 4 titanium enriched with calcium phosphate had the highest level of differentiation in vitro, the grade 5 titanium machined surfaces supported cell proliferation and matrix synthesis, and induced high expression of early differentiation markers. Increased mechanical resistance of grade 5 titanium makes it a potential candidate for orthodontic mini-implants.