RESUMEN
The mechanical behavior of each type of pacifier on rigid structures and their various impacts on orofacial growth have yet to be discovered. The study aimed to evaluate the stress distribution over a child's palate by three types of pacifiers using finite element analysis and clinical and laboratory data. Modulus of elasticity was obtained from 30 specimens comprising 10 of each conventional (A), orthodontic (B), and breast-shaped (C) pacifiers. Tongue strength was assessed in eight 3-year-old children (kPa). A hemi-maxilla model was obtained from 2- to 3-year-old skull tomography, and the images of pacifiers A, B, and C were captured using 3D scanning. The Hypermesh® program generated a mesh of 6-node tetrahedral elements for applying forces in the X, Y, and Z directions to enable a nonlinear analysis. Pacifier B exhibited the highest values for distributed stress on the palate, followed by pacifier A. Pacifier B stimulated the maxilla forward and sideways. In contrast, pacifier A promoted a forward and upward load, favoring a more atresic palate. Pacifiers A and B tended to rotate in the sagittal plane, generating tensions in the anterior incisors and favoring the open bite. Pacifier C exhibited lateral expansion by stress induction over the mid-palatal suture with less influence on incisor inclination. Pacifiers showed different detrimental stress distributions on the palate. This information can be helpful for improving recommendations given to parents.
RESUMEN
AIM: The aim of this study was to evaluate the stress distribution of a planned removable partial denture (RPD) using new proposals for calibrated gauges of 0.3 mm and 0.35 mm undercuts through the three-dimensional (3D) finite element methodology, and compare them with 0.25 mm and 0.5 mm gauges that are already existing in clinical practice. MATERIALS AND METHODS: Kennedy class-I edentulous 3D models and their respective RPDs (InVesalius software; Rhinoceros and SolidWorks CAD) were created and exported to the finite element program HyperMesh 2019 for mesh configuration. In the following steps, axial loading (0º) of 40 N per point was performed, with 3 points on the molars and 2 points on the premolars, totaling 280 N unilaterally. The model was processed by the OptiStruct 2019 software and imported into the HyperView 2019 software to obtain the stress maps (MPa). RESULTS: The use of 0.30 and 0.35 mm calibrated gauges presented tensions similar to those with the 0.25 mm gauge (gold standard) and caused no significant damage to biological structures. The use of a 0.5 mm undercut caused greater traction force in the periodontal ligament of the abutments. CONCLUSIONS: The 0.35 mm undercut seems promising as it presented more favorable results in this simulation, on the other hand, a 0.5 mm undercut is greater than that necessary for retainers made of CoCr. CLINICAL SIGNIFICANCE: This study aims to measure a new undercut gauge (0.35 mm) to increase the retention area in abutment teeth of removable partial dentures.
Asunto(s)
Dentadura Parcial Removible , Análisis de Elementos Finitos , Diseño de Dentadura , Ligamento Periodontal , Diente Premolar , Retención de Dentadura , Pilares DentalesRESUMEN
Bone is a dynamic tissue that can always rebuild itself by modeling and remodeling to maintain functionality. This tissue is responsible for several vital functions in the body, such as providing structural support for soft tissues and the body, being the central region of hematopoiesis in human adults, and contributing to mineral homeostasis. Besides, it has an innate ability of auto-regeneration when damaged. All of these processes involve several molecular cues related to biochemical and mechanical stimulus. However, when the lesion is complicated or too big, it is necessary to intervene surgically, which may not effectively solve the problem. Bone tissue engineering seeks to provide resources to resolve these clinical issues and has been advancing in recent years, presenting promising devices for bone tissue repair. The understanding of some important biofactors and bone stem-cells influence might be crucial for an effective regenerative medicine, since bone is one of the most transplanted tissues. So, the purpose of this article is to provide an overview of the bone tissue, including the role of stem cells and some of the bioactive molecules associated with these processes. Finally, we will suggest future directions for bone tissue engineering area that might be helpful in order to produce biomimetic bone substitutes that become a real alternative to translational medicine.