Engineering and evolution of the complete Reductive Glycine Pathway in Saccharomyces cerevisiae for formate and CO2 assimilation.

Using captured CO2 and C1-feedstocks like formate and methanol derived from electrochemical activation of CO2 are key solutions for transforming industrial processes towards a circular carbon economy. Engineering formate and CO2-based growth in the biotechnologically relevant yeast Saccharomyces cerevisiae could boost the emergence of a formate-mediated circular bio-economy. This study adopts a growth-coupled selection scheme for modular implementation of the Reductive Glycine Pathway (RGP) and subsequent Adaptive Laboratory Evolution (ALE) to enable formate and CO2 assimilation for biomass formation in yeast. We first constructed a serine biosensor strain and then implemented the serine synthesis module of the RGP into yeast, establishing glycine and serine synthesis from formate and CO2. ALE improved the RGP-dependent growth by 8-fold. 13C-labeling experiments reveal glycine, serine, and pyruvate synthesis via the RGP, demonstrating the complete pathway activity. Further, we re-established formate and CO2-dependent growth in non-evolved biosensor strains via reverse-engineering a mutation in GDH1 identified from ALE. This mutation led to significantly more 13C-formate assimilation than in WT without any selection or overexpression of the RGP. Overall, we demonstrated the activity of the complete RGP, showing evidence for carbon transfer from formate to pyruvate coupled with CO2 assimilation.

PhiReX 2.0: A Programmable and Red Light-Regulated CRISPR-dCas9 System for the Activation of Endogenous Genes in Saccharomyces cerevisiae.

Metabolic engineering approaches do not exclusively require fine-tuning of heterologous genes but oftentimes also modulation or even induction of host gene expression, e.g., in order to rewire metabolic fluxes. Here, we introduce the programmable red light switch PhiReX 2.0, which can rewire metabolic fluxes by targeting endogenous promoter sequences through single-guide RNAs (sgRNAs) and activate gene expression in Saccharomyces cerevisiae upon red light stimulation. The split transcription factor is built from the plant-derived optical dimer PhyB and PIF3, which is fused to a DNA-binding domain based on the catalytically dead Cas9 protein (dCas9) and a transactivation domain. This design combines at least two major advantages: first, the sgRNAs, guiding dCas9 to the promoter of interest, can be exchanged in an efficient and straightforward Golden Gate-based cloning approach, which allows for rational or randomized combination of up to four sgRNAs in a single expression array. Second, target gene expression can be rapidly upregulated by short red light pulses in a light dose-dependent manner and returned to the native expression level by applying far-red light without interfering with the cell culture. Using the native yeast gene CYC1 as an example, we demonstrated that PhiReX 2.0 can upregulate CYC1 gene expression by up to 6-fold in a light intensity-dependent and reversible manner using a single sgRNA.

Optimizing E. coli as a formatotrophic platform for bioproduction via the reductive glycine pathway.

Microbial C1 fixation has a vast potential to support a sustainable circular economy. Hence, several biotechnologically important microorganisms have been recently engineered for fixing C1 substrates. However, reports about C1-based bioproduction with these organisms are scarce. Here, we describe the optimization of a previously engineered formatotrophic Escherichia coli strain. Short-term adaptive laboratory evolution enhanced biomass yield and accelerated growth of formatotrophic E. coli to 3.3 g-CDW/mol-formate and 6 h doubling time, respectively. Genome sequence analysis revealed that manipulation of acetate metabolism is the reason for better growth performance, verified by subsequent reverse engineering of the parental E. coli strain. Moreover, the improved strain is capable of growing to an OD600 of 22 in bioreactor fed-batch experiments, highlighting its potential use for industrial bioprocesses. Finally, demonstrating the strain's potential to support a sustainable, formate-based bioeconomy, lactate production from formate was engineered. The optimized strain generated 1.2 mM lactate -10% of the theoretical maximum- providing the first proof-of-concept application of the reductive glycine pathway for bioproduction.

Unusual DNA-binding properties of the Arabidopsis thaliana WRKY50 transcription factor at target gene promoters.

KEY MESSAGE: WRKY50 from A. thaliana requires WT-boxes at target gene promoters for activation and binding. Based on the genome-wide prediction of WRKY50 target genes and the similarity of a WRKY50 binding site to WT-boxes in microbe-associated molecular pattern (MAMP)-responsive cis-regulatory modules (CRM), four WT-box containing CRMs from the promoter region of three WRKY50 target genes were investigated for their interaction with WRKY50. These target genes are DJ1E, WRKY30 and ATBBE4. Two of the four CRMs, one from DJ1E and one from WRKY30, were able to activate reporter gene expression in the presence of WRKY50. Activation requires the WT-boxes GGACTTTT, GGACTTTG from DJ1E and GGACTTTC from WRKY30. WRKY50 does not activate a second CRM from WRKY30 and the CRM from ATBBE4, both containing the WT-box TGACTTTT. In vitro gel-shift assays demonstrate WT-box-specific binding of the WRKY50 DNA-binding domain to all four CRMs. This work shows a high flexibility of WRKY50 binding site recognition beyond the classic W-box TTGACC/T.

The AssemblX Toolkit for Reliable and User-Friendly Multigene Assemblies.

The implementation of complex cloning projects covering the assembly of entire biological pathways or large genetic circuits poses a major challenge in the field of biotechnology and synthetic biology, as such projects can be costly and time-consuming. To overcome these difficulties, we developed the software-assisted AssemblX toolkit, which allows even unexperienced users to design, build, and subsequently test large DNA constructs. Currently, AssemblX allows the assembly of up to 25 functional units (e.g., genes), from 75 or more subunits (e.g., promoters, coding sequences, terminators). At the first assembly level, AssemblX uses overlap-based, scar-free, and sequence-independent cloning methods. This allows the unrestricted design at the gene level without the need for laborious parts domestication. The standardized, polymerase chain reaction-free, and virtually sequence-independent assembly into multigene modules relies on rare cutting homing endonucleases and computationally optimized overlap sequences. Selection and marker switching strategies ensure an effective process, and the assembly product can be transferred to any desired expression host.

Core Catalysis of the Reductive Glycine Pathway Demonstrated in Yeast.

One-carbon (C1) compounds are attractive microbial feedstocks as they can be efficiently produced from widely available resources. Formate, in particular, represents a promising growth substrate, as it can be generated from electrochemical reduction of CO2 and fed to microorganisms in a soluble form. We previously identified the synthetic reductive glycine pathway as the most efficient route for aerobic growth on formate. We further demonstrated pathway activity in Escherichia coli after expression of both native and foreign genes. Here, we explore whether the reductive glycine pathway could be established in a model microorganism using only native enzymes. We used the yeast Saccharomyces cerevisiae as host and show that overexpression of only endogenous enzymes enables glycine biosynthesis from formate and CO2 in a strain that is otherwise auxotrophic for glycine. We find the pathway to be highly active in this host, where 0.125 mM formate is sufficient to support growth. Notably, the formate-dependent growth rate of the engineered S. cerevisiae strain remained roughly constant over a very wide range of formate concentrations, 1-500 mM, indicating both high affinity for formate use and high tolerance toward elevated concentration of this C1 feedstock. Our results, as well the availability of endogenous NAD-dependent formate dehydrogenase, indicate that yeast might be an especially suitable host for engineering growth on formate.

Plant X-tender: An extension of the AssemblX system for the assembly and expression of multigene constructs in plants.

Cloning multiple DNA fragments for delivery of several genes of interest into the plant genome is one of the main technological challenges in plant synthetic biology. Despite several modular assembly methods developed in recent years, the plant biotechnology community has not widely adopted them yet, probably due to the lack of appropriate vectors and software tools. Here we present Plant X-tender, an extension of the highly efficient, scar-free and sequence-independent multigene assembly strategy AssemblX, based on overlap-depended cloning methods and rare-cutting restriction enzymes. Plant X-tender consists of a set of plant expression vectors and the protocols for most efficient cloning into the novel vector set needed for plant expression and thus introduces advantages of AssemblX into plant synthetic biology. The novel vector set covers different backbones and selection markers to allow full design flexibility. We have included ccdB counterselection, thereby allowing the transfer of multigene constructs into the novel vector set in a straightforward and highly efficient way. Vectors are available as empty backbones and are fully flexible regarding the orientation of expression cassettes and addition of linkers between them, if required. We optimised the assembly and subcloning protocol by testing different scar-less assembly approaches: the noncommercial SLiCE and TAR methods and the commercial Gibson assembly and NEBuilder HiFi DNA assembly kits. Plant X-tender was applicable even in combination with low efficient homemade chemically competent or electrocompetent Escherichia coli. We have further validated the developed procedure for plant protein expression by cloning two cassettes into the newly developed vectors and subsequently transferred them to Nicotiana benthamiana in a transient expression setup. Thereby we show that multigene constructs can be delivered into plant cells in a streamlined and highly efficient way. Our results will support faster introduction of synthetic biology into plant science.

Synthetic Promoters and Transcription Factors for Heterologous Protein Expression in Saccharomyces cerevisiae.

Orthogonal systems for heterologous protein expression as well as for the engineering of synthetic gene regulatory circuits in hosts like Saccharomyces cerevisiae depend on synthetic transcription factors (synTFs) and corresponding cis-regulatory binding sites. We have constructed and characterized a set of synTFs based on either transcription activator-like effectors or CRISPR/Cas9, and corresponding small synthetic promoters (synPs) with minimal sequence identity to the host's endogenous promoters. The resulting collection of functional synTF/synP pairs confers very low background expression under uninduced conditions, while expression output upon induction of the various synTFs covers a wide range and reaches induction factors of up to 400. The broad spectrum of expression strengths that is achieved will be useful for various experimental setups, e.g., the transcriptional balancing of expression levels within heterologous pathways or the construction of artificial regulatory networks. Furthermore, our analyses reveal simple rules that enable the tuning of synTF expression output, thereby allowing easy modification of a given synTF/synP pair. This will make it easier for researchers to construct tailored transcriptional control systems.

PhiReX: a programmable and red light-regulated protein expression switch for yeast.

Highly regulated induction systems enabling dose-dependent and reversible fine-tuning of protein expression output are beneficial for engineering complex biosynthetic pathways. To address this, we developed PhiReX, a novel red/far-red light-regulated protein expression system for use in Saccharomyces cerevisiae. PhiReX is based on the combination of a customizable synTALE DNA-binding domain, the VP64 activation domain and the light-sensitive dimerization of the photoreceptor PhyB and its interacting partner PIF3 from Arabidopsis thaliana. Robust gene expression and high protein levels are achieved by combining genome integrated red light-sensing components with an episomal high-copy reporter construct. The gene of interest as well as the synTALE DNA-binding domain can be easily exchanged, allowing the flexible regulation of any desired gene by targeting endogenous or heterologous promoter regions. To allow low-cost induction of gene expression for industrial fermentation processes, we engineered yeast to endogenously produce the chromophore required for the effective dimerization of PhyB and PIF3. Time course experiments demonstrate high-level induction over a period of at least 48 h.

Plant-Derived Transcription Factors for Orthologous Regulation of Gene Expression in the Yeast Saccharomyces cerevisiae.

Control of gene expression by transcription factors (TFs) is central in many synthetic biology projects for which a tailored expression of one or multiple genes is often needed. As TFs from evolutionary distant organisms are unlikely to affect gene expression in a host of choice, they represent excellent candidates for establishing orthogonal control systems. To establish orthogonal regulators for use in yeast (Saccharomyces cerevisiae), we chose TFs from the plant Arabidopsis thaliana. We established a library of 106 different combinations of chromosomally integrated TFs, activation domains (yeast GAL4 AD, herpes simplex virus VP64, and plant EDLL) and synthetic promoters harboring cognate cis-regulatory motifs driving a yEGFP reporter. Transcriptional output of the different driver/reporter combinations varied over a wide spectrum, with EDLL being a considerably stronger transcription activation domain in yeast than the GAL4 activation domain, in particular when fused to Arabidopsis NAC TFs. Notably, the strength of several NAC-EDLL fusions exceeded that of the strong yeast TDH3 promoter by 6- to 10-fold. We furthermore show that plant TFs can be used to build regulatory systems encoded by centromeric or episomal plasmids. Our library of TF-DNA binding site combinations offers an excellent tool for diverse synthetic biology applications in yeast.

AssemblX: a user-friendly toolkit for rapid and reliable multi-gene assemblies.

The assembly of large DNA constructs coding for entire pathways poses a major challenge in the field of synthetic biology. Here, we present AssemblX, a novel, user-friendly and highly efficient multi-gene assembly strategy. The software-assisted AssemblX process allows even unexperienced users to rapidly design, build and test DNA constructs with currently up to 25 functional units, from 75 or more subunits. At the gene level, AssemblX uses scar-free, overlap-based and sequence-independent methods, allowing the unrestricted design of transcriptional units without laborious parts domestication. The assembly into multi-gene modules is enabled via a standardized, highly efficient, polymerase chain reaction-free and virtually sequence-independent scheme, which relies on rare cutting restriction enzymes and optimized adapter sequences. Selection and marker switching strategies render the whole process reliable, rapid and very effective. The assembly product can be easily transferred to any desired expression host, making AssemblX useful for researchers from various fields.

Functional dissection of a strong and specific microbe-associated molecular pattern-responsive synthetic promoter.

Synthetic promoters are important for temporal and spatial gene expression in transgenic plants. To identify novel microbe-associated molecular pattern (MAMP)-responsive cis-regulatory sequences for synthetic promoter design, a combination of bioinformatics and experimental approaches was employed. One cis-sequence was identified which confers strong MAMP-responsive reporter gene activity with low background activity. The 35-bp-long cis-sequence was identified in the promoter of the Arabidopsis thaliana DJ1E gene, a homologue of the human oncogene DJ1. In this study, this cis-sequence is shown to be a tripartite cis-regulatory module (CRM). A synthetic promoter with four copies of the CRM linked to a minimal promoter increases MAMP-responsive reporter gene expression compared to the wild-type DJ1E promoter. The CRM consists of two WT-boxes (GGACTTTT and GGACTTTG) and a variant of the GCC-box (GCCACC), all required for MAMP and salicylic acid (SA) responsivity. Yeast one-hybrid screenings using a transcription factor (TF)-only prey library identified two AP2/ERFs, ORA59 and ERF10, interacting antagonistically with the CRM. ORA59 activates reporter gene activity and requires the consensus core sequence GCCNCC for gene expression activation. ERF10 down-regulates MAMP-responsive gene expression. No TFs interacting with the WT-boxes GGACTTTT and GGACTTTG were selected in yeast one-hybrid screenings with the TF-only prey library. In transgenic Arabidopsis, the synthetic promoter confers strong and specific reporter gene activity in response to biotrophs and necrotrophs as well as SA.

'In silico expression analysis', a novel PathoPlant web tool to identify abiotic and biotic stress conditions associated with specific cis-regulatory sequences.

Using bioinformatics, putative cis-regulatory sequences can be easily identified using pattern recognition programs on promoters of specific gene sets. The abundance of predicted cis-sequences is a major challenge to associate these sequences with a possible function in gene expression regulation. To identify a possible function of the predicted cis-sequences, a novel web tool designated 'in silico expression analysis' was developed that correlates submitted cis-sequences with gene expression data from Arabidopsis thaliana. The web tool identifies the A. thaliana genes harbouring the sequence in a defined promoter region and compares the expression of these genes with microarray data. The result is a hierarchy of abiotic and biotic stress conditions to which these genes are most likely responsive. When testing the performance of the web tool, known cis-regulatory sequences were submitted to the 'in silico expression analysis' resulting in the correct identification of the associated stress conditions. When using a recently identified novel elicitor-responsive sequence, a WT-box (CGACTTTT), the 'in silico expression analysis' predicts that genes harbouring this sequence in their promoter are most likely Botrytis cinerea induced. Consistent with this prediction, the strongest induction of a reporter gene harbouring this sequence in the promoter is observed with B. cinerea in transgenic A. thaliana. DATABASE URL: http://www.pathoplant.de/expression_analysis.php.

Inducible expression of p50 from TMV for increased resistance to bacterial crown gall disease in tobacco.

The dominant tobacco mosaic virus (TMV) resistance gene N induces a hypersensitive response upon TMV infection and protects tobacco against systemic spread of the virus. It has been proposed to change disease resistance specificity by reprogramming the expression of resistance genes or their corresponding avirulence genes. To reprogramme the resistance response of N towards bacterial pathogens, the helicase domain (p50) of the TMV replicase, the avirulence gene of N, was linked to synthetic promoters 4D and 2S2D harbouring elicitor-responsive cis-elements. These promoter::p50 constructs induce local necrotic lesions on NN tobacco plants in an Agrobacterium tumefaciens infiltration assay. A tobacco genotype void of N (nn) was transformed with the promoter::p50 constructs and subsequently crossed to NN plants. Nn F1 offspring selected for the T-DNA develop normally under sterile conditions. After transfer to soil, some of the F1 plants expressing the 2S2D::p50 constructs develop spontaneous necrosis. Transgenic Nn F1 plants with 4D::p50 and 2S2D::p50 expressing constructs upregulate p50 transcription and induce local necrotic lesions in an A. tumefaciens infiltration assay. When leaves and stems of Nn F1 offspring harbouring promoter::p50 constructs are infected with oncogenic A. tumefaciens C58, transgenic lines harbouring the 2S2D::p50 construct induce necrosis and completely lack tumor development. These results demonstrate a successful reprogramming of the viral N gene response against bacterial crown gall disease and highlight the importance of achieving tight regulation of avirulence gene expression and the control of necrosis in the presence of the corresponding resistance gene.

Identification of a novel type of WRKY transcription factor binding site in elicitor-responsive cis-sequences from Arabidopsis thaliana.

Using a combination of bioinformatics and synthetic promoters, novel elicitor-responsive cis-sequences were discovered in promoters of pathogen-upregulated genes from Arabidopsis thaliana. One group of functional sequences contains the conserved core sequence GACTTTT. This core sequence and adjacent nucleotides are essential for elicitor-responsive gene expression in a parsley protoplast system. By yeast one-hybrid screening, WRKY70 was selected with a cis-sequence harbouring the core sequence GACTTTT but no known WRKY binding site (W-box). Transactivation experiments, mutation analyses, and electrophoretic mobility shift assays demonstrate that the sequence CGACTTTT is the binding site for WRKY70 in the investigated cis-sequence and is required for WRKY70-activated gene expression. Using several cis-sequences in transactivation experiments and binding studies, the CGACTTTT sequence can be extended to propose YGACTTTT as WRKY70 binding site. This binding site, designated WT-box, is enriched in promoters of genes upregulated in a WRKY70 overexpressing line. Interestingly, functional WRKY70 binding sites are present in the promoter of WRKY30, supporting recent evidence that both factors play a role in the same regulatory network.

Differential expression of the TMV resistance gene N prevents a hypersensitive response in seeds and during germination.

The dominant tobacco mosaic virus (TMV) resistance gene N confers a hypersensitive response (HR) at the site of TMV infection and protects tobacco against systemic spread of the virus. To study N gene activity in seeds and early seedling development, the avirulence gene of N, the helicase domain (p50) of the TMV replicase, was constitutively expressed in a tobacco genotype without N (nn). Transgenic F1 expressing N and p50 were generated by crossing with an NN genotype. Surprisingly, Nn F1 seeds expressing p50 are viable and germinate. Only about 5 days after sowing, seedlings started to show an HR. This paralleled the upregulation of several pathogenesis-related and HR genes. The timing of the HR is consistent with the upregulation of N gene transcript 4-6 days after sowing. The expression of p50 has a stimulating effect on the N gene transcript level during germination. These results show that tobacco seeds and very young seedlings do not express a functional N gene product.

Integration of bioinformatics and synthetic promoters leads to the discovery of novel elicitor-responsive cis-regulatory sequences in Arabidopsis.

A combination of bioinformatic tools, high-throughput gene expression profiles, and the use of synthetic promoters is a powerful approach to discover and evaluate novel cis-sequences in response to specific stimuli. With Arabidopsis (Arabidopsis thaliana) microarray data annotated to the PathoPlant database, 732 different queries with a focus on fungal and oomycete pathogens were performed, leading to 510 up-regulated gene groups. Using the binding site estimation suite of tools, BEST, 407 conserved sequence motifs were identified in promoter regions of these coregulated gene sets. Motif similarities were determined with STAMP, classifying the 407 sequence motifs into 37 families. A comparative analysis of these 37 families with the AthaMap, PLACE, and AGRIS databases revealed similarities to known cis-elements but also led to the discovery of cis-sequences not yet implicated in pathogen response. Using a parsley (Petroselinum crispum) protoplast system and a modified reporter gene vector with an internal transformation control, 25 elicitor-responsive cis-sequences from 10 different motif families were identified. Many of the elicitor-responsive cis-sequences also drive reporter gene expression in an Agrobacterium tumefaciens infection assay in Nicotiana benthamiana. This work significantly increases the number of known elicitor-responsive cis-sequences and demonstrates the successful integration of a diverse set of bioinformatic resources combined with synthetic promoter analysis for data mining and functional screening in plant-pathogen interaction.

Factors required for the high CO2 specificity of the anaerobically induced maize GapC4 promoter in transgenic tobacco.

Flooding, a natural cause of anaerobiosis, is often accompanied by high CO(2) concentrations in the flood water. Plants need to respond to these environmental conditions. Strong anaerobic reporter gene activity in tobacco (Nicotiana tabacum) controlled by the glycolytic glyceraldehyde-3-phosphate dehydrogenase (GapC4) promoter from maize (Zea mays) depends on the presence of CO(2) and light. To identify factors required for CO(2) regulated gene expression, promoter deletions fused to the ß-glucuronidase reporter gene were studied in transgenic tobacco. Deletion of a 40 bp fragment directly upstream of the TATA box leads to increased anaerobic reporter gene activity both, in the presence and absence of CO(2). This deletion does not affect light specific anaerobic expression. A positive correlation between increasing CO(2) concentrations and gene activity is observed. Electrophoretic mobility shift experiments indicate that tobacco nuclear extracts harbour proteins that bind to part of the 40 bp fragment. Database assisted as well as experimental analysis reveal a role for AP2/EREBP transcription factors for conferring the high CO(2) specificity to the GapC4 promoter in tobacco leaves. This work highlights the importance for plants to respond to high environmental CO(2) concentrations under anaerobic conditions.

Alternative splicing of the maize Ac transposase transcript in transgenic sugar beet (Beta vulgaris L.).

The maize Activator/Dissociation (Ac/Ds) transposable element system was introduced into sugar beet. The autonomous Ac and non-autonomous Ds element excise from the T-DNA vector and integrate at novel positions in the sugar beet genome. Ac and Ds excisions generate footprints in the donor T-DNA that support the hairpin model for transposon excision. Two complete integration events into genomic sugar beet DNA were obtained by IPCR. Integration of Ac leads to an eight bp duplication, while integration of Ds in a homologue of a sugar beet flowering locus gene did not induce a duplication. The molecular structure of the target site indicates Ds integration into a double strand break. Analyses of transposase transcription using RT-PCR revealed low amounts of alternatively spliced mRNAs. The fourth intron of the transposase was found to be partially misspliced. Four different splice products were identified. In addition, the second and third exon were found to harbour two and three novel introns, respectively. These utilize each the same splice donor but several alternative splice acceptor sites. Using the SplicePredictor online tool, one of the two introns within exon two is predicted to be efficiently spliced in maize. Most interestingly, splicing of this intron together with the four major introns of Ac would generate a transposase that lacks the DNA binding domain and two of its three nuclear localization signals, but still harbours the dimerization domain.