Effect of different intraradicular posts in the dimensions of root canal computed tomography images.

OBJECTIVES: To evaluate the effect of different intraradicular posts on the dimensions of computed tomography (CT) images in cone-beam and fan-beam equipment. MATERIALS AND METHODS: : A total of 15 root canals of bovine teeth were instrumented up to a file #50 and root-filled by the active lateral condensation technique. The teeth were randomly divided into three groups, according to the type of intraradicular post: 1) tight fiberglass post; 2) anatomical fiberglass post; and 3) metal post. The root canals were desobturated in 10 mm and tomographic images were acquired in two devices, a cone-beam and fan-beam equipment. Then, the intraradicular posts were cemented using an automix self-conditioning and self-adhesive resin cement, and the final acquisitions of the CT images were performed for analysis. The diameter of the canal was compared before and after cementation of the intraradicular posts. The t-test was used between the initial and final measurements of each tomograph and also between the cone-beam and fan-beam tomographs (α = 0.05). RESULTS: The anatomical fiberglass post presented the smallest dimensional change among the initial and final measurements, followed by the tight fiberglass post, with the metal post being the material that showed the most considerable dimensional difference in the cone-beam. CONCLUSION: All of the intraradicular posts used promoted a change in the size of the CT image. The fan-beam scanner promoted greater dimensional change in the images.

Positive correlation between fluoride release and acid erosion of restorative glass-ionomer cements.

OBJECTIVE: The aim of this study was to determine whether there is a correlation between acid erosion and fluoride release of conventional glass ionomer cements. METHODS: Ten specimens for each material were prepared for fluoride release tests and five for acid erosion tests separately. After placed in pH cycling solution, concentration of fluoride was measured by a fluoride-ion selective electrode each day for 15 days. For the acid erosion test, specimens were immersed in a lactic acid solution and their depth measured with a spring-loaded dial gauge. The data were submitted to 3-way ANOVA, followed by Tukey's test (p<0.05) RESULTS: All materials showed ability to elute fluoride in the 15 day period of the test, with the same pattern of high fluoride release at the first 24h. Despite this, the amount of fluoride released was statistically different among the 18 groups, with the highest for Maxxion R and the lowest for Chemfil Rock (p>0.05). The highest acid erosion values were registered for Magic Glass, Ion Z, VitroFil and Maxxion R, which exceeded the maximum stipulated by the relevant ISO test (ISO 9917-1). A positive linear correlation (r2=0.4886) was found for both properties, i.e., higher fluoride release is related to higher acid erosion. SIGNIFICANCE: Acid erosion and fluoride release are related properties of GICs, though factors such as pH and P/L ratio lead to differences between actual values for individual brands of these materials.

Simplified Surface Treatments for Ceramic Cementation: Use of Universal Adhesive and Self-Etching Ceramic Primer.

The aim of this study was to evaluate the shear bond strength of resin cement and lithium disilicate ceramic after various surface treatments of the ceramic. Sixty blocks of ceramic (IPS e.max Press, Ivoclar Vivadent) were obtained. After cleaning, they were placed in polyvinyl chloride tubes with acrylic resin. The blocks were divided into six groups (n=10) depending on surface treatment: H/S/A - 10% Hydrofluoric Acid + Silane + Adhesive, H/S -10% Hydrofluoric Acid + Silane, H/S/UA - 10% Hydrofluoric Acid + Silane + Universal Adhesive, H/UA- 10% Hydrofluoric Acid + Universal Adhesive, MBEP/A - Monobond Etch & Prime + Adhesive, and MBEP - Monobond Etch & Prime. The light-cured resin cement (Variolink Esthetic LC, Ivoclar Vivadent) was inserted in a mold placed over the treated area of the ceramics and photocured with an LED for 20 s to produce cylinders (3 mm x 3 mm). The samples were subjected to a shear bond strength test in a universal test machine (Instron 5965) by 0.5 mm/min. ANOVA and Tukey tests showed a statistically significant difference between groups (p<0.05). The results of the shear strength test were H/S/A (9.61±2.50)A, H/S (10.22±3.28)A, H/S/UA (7.39±2.02)ABC, H/UA (4.28±1.32)C, MBEP/A (9.01±1.97)AB, and MBEP (6.18±2.75)BC. The H/S group showed cohesive failures, and the H/UA group was the only one that presented adhesive failures. The conventional treatment with hydrofluoric acid and silane showed the best bond strength. The use of a new ceramic primer associated with adhesive bonding obtained similar results to conventional surface treatment, being a satisfactory alternative to replace the use of hydrofluoric acid.

Influence of the resin cement color on the shade of porcelain veneers after accelerated artificial aging / Influence of the resin cement color on the shade of porcelain veneers after accelerated artificial aging / Influência da cor do cimento resinoso na tonalidade de facetas de porcelana após envelhecimento artificial acelerado

Objectives: The aim of this study was to evaluate the influence of the color of the resin luting cement in the final shade of minimally invasive porcelain veneers after accelerated artificial aging (AAA). Material and methods: 20 bovine teeth were collected, prepared and divided into two groups. The roots were removed and the buccal surfaces were polished to obtain a flat surface. Porcelain discs (IPS Empress Esthetic) were produced to a standardized shade (ET1) and thickness (0.6mm). The teeth and the veneers surfaces were prepared according to manufacturer recommendations. For group I (n=10), the White-Opaque (WO) base-paste was used and for group II (n=10) the Yellow (Y) base-paste. Each specimen was photocured for 60 s. The specimens were next subjected to AAA. They were submitted to color readings with a spectrophotometer in three moments: after the preparation (only the substrate), after the cementation and polymerization of the veneers and after the AAA. Were obtained values of L*, a* and b* and the total color change was calculated (?E*). Values obtained were subjected to statistical analysis in SPSS 17.0 for Windows with a significance of 0.05. Results: When comparing the cements, the Y cement showed higher ?E*, lower L* and higher b* after AAA than the WO. Conclusion: Both cements could mask the substrate color. With AAA, only the Y shade showed a ?E* clinically unacceptable, becoming more yellow (higher b*) and losing lightness (lower L*).

Objetivos: O objetivo do presente estudo foi avaliar a influência da cor do cimento resinoso na tonalidade final de facetas de porcelana minimamente invasivas, após envelhecimento artificial acelerado (EAA). Material e Métodos: 20 dentes bovinos foram coletados, preparados e divididos em dois grupos. As raízes foram removidas e a face vestibular foi polida para obter uma superfície plana. Discos de porcelana (IPS Empress Esthetic) foram confeccionados na cor ET1 e espessura de 0,6 mm. Os dentes e as superfícies dos discos foram preparados de acordo com as recomendações do fabricante. Para o grupo I (n=10) foi usado o cimento resinoso White-Opaque (WO) pasta-base, e para o grupo II (n-10) utilizou-se o Yellow (Y) pasta-base. Cada espécime foi fotopolimerizado por 60 s. Os espécimes foram então submetidos ao EAA. Eles foram submetidos a leituras de cor com auxílio de um espectro fotômetro em três momentos: após o preparo (apenas o substrato), após a cimentação e polimerização das facetas e após o EAA. Foram obtios valores de L*, a* e b* e o total da variação de cor foi calculado (?E*). Os valores obtidos foram submetidos à análise estatística no SPSS 17.0 para Windows, com nível de significância de 0,05. Resultados: O cimento Y apresentou maior ?E*, menor L* e maior b* após o EAA em comparação com o WO. Conclusão: Ambos os cimentos têm capacidade de mascarar a cor do substrato. Com o EAA, apenas o Y apresentou um valor de ?E* inaceitável clinicamente, se tornando mais amarelo (maior b*) e perdendo luminosidade (menor L*).