A highly sensitive first derivative synchronous spectrofluorimetric approach for the simultaneous analysis of the anti-breast cancer co-administered drugs, letrozole and tramadol in dosage forms and human plasma at nanogram levels.

Letrozole is an anticancer medication prescribed for the management of estrogen receptor-positive breast cancer in postmenopausal women. Chronic pain is prevalent in patients receiving chemotherapy, leading to the use of adjuvant analgesics such as tramadol. This work introduces the first analytical approach for the concurrent quantification of letrozole and tramadol, two co-administered drugs, employing a rapid, highly sensitive, eco-friendly, and cost-effective first derivative synchronous spectrofluorimetric technique. The fluorescence of tramadol and letrozole was measured at wavelengths of 235.9 nm and 241.9 nm, respectively using a wavelength difference (Δλ) of 60.0 nm. The developed approach demonstrated exceptional linearity (r ˃ 0.999) within the specified concentration ranges for tramadol (10.0-1200.0 ng/mL) and letrozole (1.0-140.0 ng/mL). The results demonstrated that the proposed technique exhibits a high level of sensitivity, with detection limits of 0.569 and 0.143 ng/mL for tramadol and letrozole, respectively, indicating the good bioanalytical applicability. The within-run precisions, both intra-day and inter-day, for both analytes, were less than 0.71 % RSD. The developed approach was effectively applied to simultaneously estimate the mentioned drugs in their tablets and human plasma samples, achieving high percentage recoveries and low % RSD values. In order to assess the environmental sustainability of the developed approach, Analytical GREEnnessNNESS (AGREE) and the Green Analytical Procedure Index (GAPI) metric tools were employed. Both tools revealed that the developed approach is excellent green, suggesting its usage as an environmentally-friendly alternative for the routine assayof the investigated pharmaceuticals. The developed approach was validated according to the ICHQ2 (R1) requirements.

Facile and green chemistry-compatible fluorescence spectroscopic applications of acid red 87 used to evaluate eletriptan, antimigraine, in its pharmaceutical and biological samples.

Eletriptan (ETR), a selective pharmaceutical agent agonist of the 5-hydroxytryptamine1 receptor subtype, are primarily used to treat acute migraine attacks. ETR is a triptan-class medication that works by narrowing cerebral blood vessels and reducing chemicals that produce headache pain, light and sound sensitivity, and nausea. Due to its effectiveness in reducing migraine symptoms, it is a worthwhile choice for those looking for quick and efficient treatment. A green, raid, one-pot and straightforward fluorescence spectrometric method was employed to evaluate ETR in tablets and biological samples. By introducing the ETR drug and the fluorescent ligand, Acid red 87, in an acidic buffer, a quenching of the ligand native fluorescent was promptly produced. The quenching action was simply attributed to the selective ion-pair complex generation between the cationic target and the selected ligand. An increase in ETR concentration was linearly proportional to the quenching response in the 50.0 - 500.0 ng/mL range. The optimal configurations for adjusting the system's variable parameters were determined by examining the ETR-Acid red 87 system's response. Additionally, the sensor that was developed met the standards set by the International Council for Harmonisation of Technical Requirements of Pharmaceuticals for Human Use. The sensitivity thresholds of the approach were 13.8 and 42.0 ng/mL for the detection and quantification parameters, respectively, LOD and LOQ. This approach proficiently evaluated the pharmaceutical and biological samples of ETR. Finally, the proposed approach not only simplifies the analysis process but also limits the badimpact on the environment, making it a promising technique for analytical applications.

An ingenious technique based on the usage of fluorone-based dye; pyrosin B in prucalopride assay in different matrices through an "on-off" dye native fluorescence probe.

Prucalopride (PCD), is a modern medication approved by the United States in 2018 to alleviate constipation caused by motility issues. PCD demonstrates a strong affinity and selectivity toward the 5-HT4 receptor. The study here introduces a feasible, direct, non-extractive, and affordable pathway for PCD analytical tracking. The fluorimetric study is based on the on-off effect on the emission amplitude of fluorone-based dye (pyrosin B). In a one-pot experiment, the complex between PCD and pyrosin B is formed instantly in an acidic medium. Correlation between decreased pyrosin B emission and PCD concentrations provides a linear calibration plot from 50 to 900 ng/mL. PCD-dye complex system affecting variables were meticulously tuned. The values of the estimated limit of quantitation and limit of detection for the current methodology were 47.5 and 15.7 ng/mL, respectively. Conformity of the strategy validity was achieved by a comprehensive study of the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use criteria. The method was convincingly applied for PCD assay in tablets and content uniformity investigation. Furthermore, PCD tracking in the spiked biological fluid was applied. Finally, the method uses distilled water as dispersing medium which rise accommodation with the green chemistry principle.

Formulation of silymarin surface modified vesicles: In vitro characterization to cell viability assessment.

Silymarin (SLR) is a poorly water-soluble bioactive compound with a wide range of therapeutic activities. Nanosized silymarin vesicles (F1-F6) were prepared by the solvent evaporation rehydration method. The silymarin vesicles were evaluated for vesicle size, surface charge, entrapment efficiency, and drug release studies. The optimized SLR lipid vesicle (F3) was further modified with the addition of the cationic polymer chitosan. After that, the modified vesicle (F3C1) was assessed for permeation flux, antimicrobial activity, cell viability, and molecular docking studies. The silymarin vesicles showed nanometric size (<250 nm), low polydispersibility index (<0.05), negative surface charge, and high SLR entrapment (85-95 %). The drug release study result demonstrated a maximum drug release of 91.2 ± 2.8 %. After adding chitosan to the surface, there was a significant change in the size, polydispersibility index, surface charge (positive), and encapsulation efficiency. The drug release was found to be prolonged, and the permeation flux was also increased in comparison to free SLR. A comparative antimicrobial result was observed in comparison to the free SLR and standard drug. The cell viability assay also demonstrated a low IC50 value for F3C1 against the cell line.

Synergistic utility of NBD-Cl fluorogenic loading activity and salting-out assisted liquid-liquid extraction as sample pretreatment in rasagiline tracking in different matrices.

A typical drug used to treat Parkinson's disease is called rasagiline. It belongs to an assortment of drugs known as monoamine oxidase inhibitors, which function by raising dopamine levels in the brain. This work created a unique spectrofluorimetric method for the analytical assay of rasagiline for the first time. The approach utilized the synergistic utility of the fluorogenic properties of benzofurazan and salting-out assisted liquid-liquid extraction. By combining these techniques an ultrasensitive, and highly selective methodology for the assay of rasagiline was established. Measurements were made of the resultant yellow fluorescent product at 533 nm by applying an excitation wavelength of 475.3 nm. The calibration graph was examined to assess its linearity across a range of 30-600 ng/ml. Through estimation, the limit of detection was discovered to be 8.9 ng/ml, while the quantitation limit was estimated to be 27 ng/ml. All relevant parameters influencing the fulfillment of the developed method were thoroughly examined and tuned. Following the directives set by the (ICH) the suggested approach was confirmed and demonstrated its capability for the accurate determination of rasagiline in tablets, as well as for testing content uniformity. The incorporation of salting-out assisted liquid-liquid extraction technology enables effective tracking of rasagiline in plasma samples, providing a novel and innovative approach for its analysis in biological matrices.

Integration of a facile sustainable resonance Rayleigh scattering switchable-based system for feasible determination of centrophenoxine, a nootropic and antioxidant agent; application to crude materials and dosage forms.

The proposed research adheres to a certain methodology to ensure that the technique used for analyzing the centrophenoxine drug is sustainable and green. It is important to highlight that several tools that have been recently developed were utilized as potential indicators of environmental sustainability and applicability. The present research presents a novel and entirely innovative method utilizing ultrasensitive spectrofluorimetry for the detection of centrophenoxine (CPX) drug. The employed methodology in this study involved the utilization of one-step, one-pot, and direct spectrofluorimetric technique, which was found to be both efficient and environmentally sustainable in the validation and assessment of the drug. Simply, when CPX and erythrosine B reagent were combined in an acidic environment, the highly resonance Rayleigh scattering product was immediately produced. The sensitivity limits were observed to be within the range of 15-47 ng mL-1, whereas the linearity was assessed to be in the range of 50-2000 ng mL-1. The optimal settings for all modifiable parameters of the system were ascertained through an analysis of centrophenoxine-erythrosine B complexes. Moreover, the system demonstrated compliance with International Council for Harmonization (ICH) specifications without encountering any issues. The suggested process was then rated on different recent environmental safety measuring metrics to see how good it was for the environment. Fortunately, the WAC standards that combine ecological and functional elements utilizing the Green/Red/Blue (RGB 12) design also acclaimed the current analytical technique as a white one. Additionally, a new applicability evaluation tool (BAGI) was employed to estimate the practicability of the planned method in the analytical chemistry field.

Self-assembling Organogels Loaded with Tenoxicam for Local Intensive Pain and Inflammation Cure: In Vitro and In Vivo Correlation.

Due to tenoxicam (TX)'s poor aqueous solubility (0.072 mg/ml), it is poorly absorbable in the GIT, and the long-term oral administration of TX may cause severe GIT disturbances. Topical administration of TX can help in bypassing the GIT adverse effects. Therefore, in the present work, we constructed different pluronic/lecithin organogels (PLOs) for topical delivery of TX. PLO was constructed simply via direct mixing of an aqueous pluronic solution with lecithin solution. The prepared PLO formulations were characterized for their physicochemical properties including pH, drug content, visual inspection, viscosity, and spreadability. Also, the in vitro release and kinetic studies were carried out to investigate the mechanism of drug release. Moreover, the in vivo studies were carried out by investigating the anti-inflammatory and analgesic activities using albino male rats. The results showed that the modified PLOs have good physicochemical properties. The viscosity of the modified gels is a direct proportionality with both lecithin and pluronic concentrations. Also, subsequently, the drug release rate is directly proportional to gel viscosity. Moreover, the in vivo studies showed that the modified PLOs (F19) showed a significant ( < 0.05%) paw edema inhibition and pain analgesia compared with other investigated groups. Also, the results indicated that the increase in dose is accompanied by higher activity and a longer duration of action which extended to 12 h. Hence, the modified PLOs are promising safe candidates or vehicles for effective TX loading with sustained delivery behavior.

Formulation of silymarin binary and ternary solid dispersions: Characterization, simulation study and cell viability assessment against lung cancer cell line.

Silymarin (SL) is a water-insoluble flavonoid used in the treatment of different diseases, but its therapeutic activity is limited due to its low solubility. So, in the present study, SL solid dispersions (SDs) were developed using different carriers like Kollidone VA64 (KL), Soluplus (SP), and Poloxamer 188 (PL) by solvent evaporation (SE), microwave irradiation (MI), and freeze-drying (FD) methods. The phase solubility and saturation solubility studies were assessed to estimate the stability constant as well as the carrier effect. The dissolution studies were performed for prepared SL-SDs (binary and ternary) to select the optimum SL-SDs. The selected SL-SDs (F5, F9) were further characterized for infrared spectroscopy (IR), nuclear magnetic resonance (NMR), differential scanning calorimeter (DSC), scanning electron microscope (SEM), and X-ray diffraction (XRD). Finally, the comparative cell viability assay (lung cancer cell line) was performed to evaluate the change in activity after the formulation of SDs. The phase solubility and solubility study results displayed marked enhancements in solubility. The dissolution study findings showed significant enhancement in drug release from ternary solid dispersions (F7-F9) > ternary physical mixture (PM3) > binary solid dispersions (F1-F6) > binary physical mixture (PM1, PM2) in comparison to free SL. A greater release was observed from ternary SDs due to the addition of PL in the formulation, which had a synergistic effect on increasing the solubility. IR and NMR spectra revealed no chemical interaction between SL, KL, and PL. DSC, XRD, and SEM all confirmed the transformation of crystalline SL into amorphous SL. The cell viability assay demonstrated significantly enhanced results from ternary solid dispersion (F9) compared to free SL. Based on the study results, it can be said that SL-SDs are an alternative way to deliver drugs orally that can improve solubility and have anti-cancer activity.

Utility of Cilefa Pink B, a foodstuff dye as a fluoro-substrate in the devising of the first facile green Molecular-mass-Related Fluorescence Sensor for quantifying amlodipine in batched material and dosage forms; content uniformity evaluation.

This study introduces the first and unique Molecular-mass-Related Fluorescence Sensor as the first fluorimetric strategy for determining amlodipine. An environmentally friendly, single-step, and direct spectrofluorimetric approach was utilized to evaluate the analyte. In an acidic setting, combining the amlodipine medication and the fluorescent dye Cilefa Pink B generated an instantaneous ultra-fluorescent product. An increase in dye response after adding amlodipine was proportional to the molecular weight of the generated complex, as measured at 329 nm. was the idea ofthe applied fluorimetric analysis. The complexing process increased the molecular mass from 879.86 to 1288.739 g mol-1. The medication's range of 0.050-1.00 µg mL-1 is directly correlated with this molecular massenlargement. The ideal settings for the changeable parameters of the system were established through an analysis of the response of the amlodipine-Cilefa Pink B system. Furthermore, the developed sensor complied with ICH (International Council for Harmonization) standards. The sensitivity limits were 0.0139 µg mL-1 (for the detection limit, LOD) and 0.042 µg mL-1 (for the quantification limit, LOQ). Additionally, this method effectively recovered the drug in its original and therapeutic dosage forms. Finally, the proposed process's environmental impact was also assessed through different modern greenness evaluation tools.

A highly sensitive micelle-enhanced synchronous spectrofluorimetric determination of the recently approved co-formulated drugs, bilastine and montelukast in pharmaceuticals and human plasma at nanogram levels.

In this study, the simultaneous determination of bilastine and montelukast, two recently approved co-formulated antihistaminic medications, was accomplished using a quick, sensitive, environmentally friendly, and reasonably priced synchronous fluorescence spectroscopic approach for the first time. Enhancement of the method's sensitivity down to nanogram levels was achieved by the addition of sodium dodecyl sulfate (1.0% w/v) as a micellar system. According to the results, bilastine and montelukast's fluorescence was measured at 255.3 and 355.3 nm, respectively, using Δλ of 40.0 nm and distilled water as a green diluting solvent. With respect to the concentration ranges of bilastine (5.0-300.0 ng/ml) and montelukast (50.0-1000.0 ng/ml), the method showed excellent linearity (r ≥ 0.9998). The results showed that the suggested method is highly sensitive, with detection limits of 1.42 and 13.74 ng/ml for bilastine and montelukast, respectively. Within-run precisions (intra- and interday) per cent relative standard deviations (RSD) for both analytes were <0.59%. With high percentage recoveries and low percentage RSD values, the designed approach was successfully applied for the simultaneous estimation of the cited medications in their dosage form and human plasma samples. To evaluate the green profile of the suggested method, an analytical GREENNESS metric approach (AGREE) and green analytical procedure index (GAPI) metric tools were used. These two methods for evaluating greenness confirmed that the developed method met the highest number of green requirements, recommending its use as a green substitute for the routine analysis of the studied drugs. The proposed approach was validated according to ICHQ2 (R1) guidelines.

Formulation of Silymarin-ß Cyclodextrin-TPGS Inclusion Complex: Physicochemical Characterization, Molecular Docking, and Cell Viability Assessment against Breast Cancer Cell Lines.

Silymarin (SIL) is a poorly water-soluble flavonoid reported for different pharmacological properties. Its therapeutic applications are limited due to poor water solubility. In this study, the solubility of silymarin has been enhanced by preparing freeze-dried binary and ternary complexes using beta cyclodextrin (ßCD) and d-α-tocopherol polyethylene glycol 1000 succinate (TPGS). The stoichiometry of the drug and the carrier was selected from the phase solubility study. The dissolution study was performed to assess the effect of complexation on the release pattern of SIL. The formation of inclusion complexes was confirmed by different physicochemical studies. Finally, a cell viability assay (MCF 7; breast cancer cell line) was performed to compare the activity with free SIL. The phase solubilization results revealed the formation of a stable complex (binary) with a stability constant and complexation efficiency (CE) value of 288 mol L-1 and 0.045%. The ternary sample depicted a significantly enhanced stability constant and CE value (890 mol L-1 and 0.14%). The release study results showed a marked increase in the release pattern after addition of ßCD (alone) in the binary mixture (49.4 ± 3.1%) as well as inclusion complex (66.2 ± 3.2%) compared to free SIL (32.7 ± 1.85%). Furthermore, with the addition of TPGS in SIL-ßCD (ternary), the SIL release was found to be significantly enhanced from the SIL ternary mixture (79.2 ± 2.13%) in 120 min. However, fast SIL release was achieved with 99.2 ± 1.7% in 45 min for the SIL ternary complex. IR and NMR spectral analysis results revealed the formation of a stable complex with no drug-polymer interaction. The formation of complexes was also confirmed by the molecular docking study (docking scores of 4.1 and -6.4 kcal/mol). The in vitro cell viability result showed a concentration-dependent activity. The IC50 value of the SIL ternary complex was found to be significantly lower than that of free SIL. The findings of the study concluded that the prepared SIL inclusion complex can be used as an alternative oral delivery system to enhance solubility, dissolution, and biological activity against the tested cancer cell line.

Effect of nano-encapsulated food flavorings on streptozotocin-induced diabetic rats.

Flavors and aromas are widely used in food and pharmaceutical industries to enhance food palatability. However, it is worth noting that they may also have bioactivity. This study aims to examine the potential impact of key flavors and their nanocapsules on health and diseases, such as type 2 diabetes mellitus (T2DM). The 36 nanocapsules of key flavorings were prepared by high shear homogenization (HSH). Seventy-two male Sprague-Dawley rats received a single dosage of streptozotocin (35 mg kg-1 body weight) intraperitoneally. All of the nutritional and biochemical parameters were statistically analyzed. A virtual docking study was conducted. Linalool nanoemulsion results showed the highest encapsulation efficiency (86.76%), while isoamyl acetate nanoparticles showed the lowest (69.99%). According to GC-MS analysis, encapsulation did not affect the flavoring structure with particle size distributions ranging from 277.3 to 628.8 nm. Using TEM, nanoemulsion particles appeared spherical with a desired nanometric diameter size. In the oral glucose tolerance test, flavorings in oil and nanoforms had no discernible hypoglycemia effects in normal rats. The nutritional and biochemical parameters confirmed that both normal and nanoencapsulation forms demonstrated a potential anti-hyperglycemic effect, and enhanced the rat health compared to the raw flavorings. The studied flavorings and their nanocapsules seem to have the potential double effect of a flavor compound as a food palatability enhancer with a potential beneficial effect on type 2 diabetes mellitus without any health drawbacks.

Formulation of multicomponent inclusion complex of cyclodextrin-amino acid with Chrysin: Physicochemical characterization, cell viability and apoptosis assessment in human primary glioblastoma cell line.

Chrysin (CR) is a water-insoluble drug reported for different therapeutic effects. The microwave irradiation method was used in this study to create a multicomponent inclusion complex (CR-MC) containing CR (drug) and carrier hydroxyl propyl beta cyclodextrin (HP ß CD) and L-arginine (LA). The prepared inclusion complex (CR-MC) was evaluated for dissolution study and results were compared with chrysin physical mixture (CR-PM). Further, the samples were assessed for infra-red (IR), nuclear magnetic resonance (NMR), differential scanning calorimeter (DSC), scanning electron microscope (SEM) and molecular docking. Finally, the cell viability, reactive oxygen species and flow cytometer studies were also assessed to check the potential of the prepared inclusion complex on the human primary glioblastoma cell line (U87-MG cell). The phase solubility findings revealed a stability constant (773 mol L-1) as well as a complexation efficiency of 0.027. The dissolution study displayed a significant increase in CR release from CR-MC (99.03 ± 0.39%) > CR-PM (70.58 ± 1.16%) > pure CR (35.29 ± 1.55%). NMR and IR spectral data revealed no interaction between CR and carriers. SEM and DSC study results revealed the conversion into amorphous form. The molecular docking results illustrated a high docking score, which supports the findings of complex formation. The cell viability, reactive oxygen species, and flow cytometry studies results showed enhanced activity from CR-MC against the tested human primary glioblastoma cell line. From the results it has been observed that chrysin solubility significantly increased after complexation and there in vitro activity also enhanced against cancer cell line.

Effect of Europinidin against Alcohol-Induced Liver Damage in Rats by Inhibiting the TNF-α/TGF-ß/IFN-γ/NF-kB/Caspase-3 Signaling Pathway.

BACKGROUND: The effect of europinidin on alcoholic liver damage in rats was examined in this research. METHODS: A total of 24 Wistar rats were grouped in the same way into four groups: normal control (normal), ethanol control (EtOH), europinidin low dose (10 mg/kg), and europinidin higher dose (20 mg/kg). The test group rats were orally treated with europinidin-10 and europinidin-20 for 4 weeks, whereas 5 mL/kg distilled water was administered to control rats. In addition, 1 h after the last dose of the above-mentioned oral treatment, 5 mL/kg (i.p.) EtOH was injected to induce liver injury. After 5 h of EtOH treatment, samples of blood were withdrawn for biochemical estimations. RESULTS: Administration of europinidin at both doses restored all of the estimated serum, i.e., liver function tests (ALT, AST, ALP), biochemical test (Creatinine, albumin, BUN, direct bilirubin, and LDH), lipid assessment (TC and TG), endogenous antioxidants (GSH-Px, SOD, and CAT), malondialdehyde (MDA), nitric oxide (NO), cytokines (TGF-ß, TNF-α, IL-1ß, IL-6, IFN-γ, and IL-12), caspase-3, and nuclear factor kappa B (NF-κB) associated with the EtOH group. CONCLUSION: The results of the investigation showed that europinidin had favorable effects in rats given EtOH and may have hepatoprotective potential property.

Novel Natrosol/Pectin-co-poly (acrylate) based pH-responsive polymeric carrier system for controlled delivery of Tapentadol Hydrochloride.

Background & Objectives: This study aimed to create a controlled delivery system for Tapentadol Hydrochloride by developing interpenetrating networks (IPNs) of Natrosol-Pectin copolymerized with Acrylic Acid and Methylene bisacrylamide, and to analyze the effects of various ingredients on the physical and chemical characteristics of the IPNs. Methods: Novel Tapentadol Hydrochloride-loaded Natrosol-Pectin based IPNs were formulated by using the free radical polymerization technique. Co-polymerization of Acrylic Acid (AA) with Natrosol and Pectin was performed by using Methylene bisacrylamide (MBA). Ammonium persulfate (APS) was used as the initiator of crosslinking process. The impact of ingredients i.e. Natrosol, Pectin, MBA, and Acrylic Acid on the gel fraction, porosity, swelling (%), drug loading, and drug release was investigated. FTIR, DSC, TGA, SEM and EDX studies were conducted to confirm the grafting of polymers and to evaluate the thermal stability and surface morphology of the developed IPNs. Results: Swelling studies exhibited an increase in swelling percentage from 84.27 to 91.17% upon increasing polymer (Natrosol and Pectin) contents. An increase in MBA contents resulted in a decrease in swelling from 85 to 67.63%. Moreover, the swelling was also observed to increase with higher AA contents. Significant drug release was noted at higher pH instead of gastric pH value. Oral toxicological studies revealed the nontoxic and biocompatible nature of Natrosol-Pectin IPNs. Interpretation & Conclusion: The developed IPNs were found to be an excellent system for the controlled delivery of Tapentadol Hydrochloride.

Protective effect of fustin against adjuvant-induced arthritis through the restoration of proinflammatory response and oxidative stress.

Rheumatoid arthritis causes irreparable damage to joints. The present research sought to check fustin's anti-arthritic efficacy against the complete Freund's adjuvant-induced arthritis paradigm in animals by altering the inflammatory response. In the rats, complete Freund's adjuvant was used to trigger arthritis and they received fustin at 50 and 100 mg/kg for 21 days. At regular intervals, the hind paw volume and arthritic score were assessed. After the trial period, hematological, antioxidant, pro-inflammatory cytokines, and other biochemical parameters were estimated. Fustin-treated rats showed the down-regulation of hind paw volume, arthritic score, and altered hematological parameters (TLC, DLC (neutrophil, lymphocyte, monocyte, eosinophil, basophil)). Furthermore, fustin significantly mitigates proinflammatory cytokine (reduced interleukin, tumor necrosis factor-a (TNF-α), IL-6, IL-1ß), oxidative stress (attenuated malondialdehyde (MDA), catalase (CAT), glutathione (GSH), superoxide dismutase (SOD)), attenuated production of prostaglandin E2 and myeloperoxidase (MPO) and improved nuclear factor erythroid 2-related factor (Nrf2) action. Fustin led to the benefit in arthritis-prone animals elicited by complete Freund's adjuvant via pro-inflammatory cytokine.

Application of quality-by-design for adopting an environmentally green fluorogenic determination of benoxinate hydrochloride in eye drops and artificial aqueous humour.

Herein, a sensitive and selective spectrofluorimetric method has been developed for the determination of the ocular local anesthetic benoxinate hydrochloride (BEN-HCl) in eye drops and artificial aqueous humour. The proposed method is based on the interaction of fluorescamine with the primary amino group of BEN-HCl at room temperature. Following the excitation of the reaction product at 393 nm, the emitted relative fluorescence intensity (RFI) was measured at 483 nm. The key experimental parameters were carefully examined and optimized by adopting an analytical quality-by-design approach. The method used a two-level full factorial design (24 FFD) to obtain the optimum RFI of the reaction product. The calibration curve was linear at the range of 0.10-1.0 µg/mL of BEN-HCl with sensitivity down to 0.015 µg/mL. The method was applied for analyzing the BEN-HCl eye drops and could also assess its spiked levels in artificial aqueous humour with high % recoveries (98.74-101.37%) and low SD values (≤ 1.11). To investigate the green profile of the proposed method, a greenness assessment was performed with the aid of the Analytical Eco-Scale Assessment (ESA) and GAPI. The developed method obtained a very high ESA rating score in addition to being sensitive, affordable, and environmentally sustainable. The proposed method was validated according to ICH guidelines.

Correction: Exploiting butyrylcholinesterase inhibitors through a combined 3-D pharmacophore modeling, QSAR, molecular docking, and molecular dynamics investigation.

[This corrects the article DOI: 10.1039/D3RA00526G.].

Annotation of Potential Vaccine Targets and Designing of mRNA-Based Multi-Epitope Vaccine against Lumpy Skin Disease Virus via Reverse Vaccinology and Agent-Based Modeling.

Lumpy skin disease is a fatal emerging disease of cattle, which has started to gain extensive attention due to its rapid incursions across the globe. The disease epidemic causes economic loss and cattle morbidity. Currently, there are no specific treatments and safe vaccines against the lumpy skin disease virus (LSDV) to halt the spread of the disease. The current study uses genome-scan vaccinomics analyses to prioritize promiscuous vaccine candidate proteins of the LSDV. These proteins were subjected to top-ranked B- and T-cell epitope prediction based on their antigenicity, allergenicity, and toxicity values. The shortlisted epitopes were connected using appropriate linkers and adjuvant sequences to design multi-epitope vaccine constructs. Three vaccine constructs were prioritized based on their immunological and physicochemical properties. The model constructs were back-translated to nucleotide sequences and codons were optimized. The Kozak sequence with a start codon along with MITD, tPA, Goblin 5', 3' UTRs, and a poly(A) tail sequences were added to design a stable and highly immunogenic mRNA vaccine. Molecular docking followed by MD simulation analysis predicted significant binding affinity and stability of LSDV-V2 construct within bovine immune receptors and predicted it to be the top-ranked candidate to stimulate the humeral and cellular immunogenic responses. Furthermore, in silico restriction cloning predicted feasible gene expression of the LSDV-V2 construct in a bacterial expression vector. It could prove worthwhile to validate the predicted vaccine models experimentally and clinically against LSDV.

Optimisation of a Greener-Approach for the Synthesis of Cyclodextrin-Based Nanosponges for the Solubility Enhancement of Domperidone, a BCS Class II Drug.

BCS class II molecules suffer from low oral bioavailability because of their poor permeability and sub-optimal aqueous solubility. One of the approaches to enhance their bioavailability is using cyclodextrin-based nanosponges. This study aimed to optimise and evaluate the feasibility of a microwave-assisted approach to synthesise nanosponges and improve domperidone's solubility and drug delivery potential. In the production process, microwave power level, response speed, and stirring speed were optimised using the Box-Behnken approach. Ultimately, the batch with the smallest particle size and highest yield was chosen. The optimised method of synthesis of the nanosponges resulted in a product yield of 77.4% and a particle size of 195.68 ± 2.16 nm. The nanocarriers had a drug entrapment capacity of 84 ± 4.2% and a zeta potential of -9.17± 0.43 mV. The similarity and the difference factors demonstrated proof-of-concept, showing that the drug release from the loaded nanosponges is significantly greater than the plain drug. Additionally, spectral and thermal characterisations, such as FTIR, DSC, and XRD, confirmed the entrapment of the drug within the nanocarrier. SEM scans revealed the porous nature of the nanocarriers. Microwave-assisted synthesis could be used as a better and greener approach to synthesise these nanocarriers. It could then be utilised to load drugs and improve their solubility, as seen in the case of domperidone.