RESUMEN
Background In light of the trend of using zirconia crowns, clinicians will likely face abutment included in removable partial dentures (RPD) designs with existing zirconia. However, the decision to replace the existing crown with a surveyed crown or modify the existing crown to accept the RPD is unclear. To the best of our knowledge, there is a lack of literature on the effect of preparing a rest seat on the existing monolithic zirconia crown in the patient's mouth on the fracture resistance of the crown. Therefore, in this study, we aimed to evaluate the fracture resistance of computer-aided design/computer-aided manufacturing (CAD/CAM) zirconia surveyed crowns with digitally designed rest seats and hand-modified rest seats. Methods Thirty CAD/CAM zirconia surveyed crowns were digitally designed and fabricated and divided into groups (n=10 per group) as follows: Group 1 comprised surveyed crowns with no occlusal rest seat; Group 2 comprised surveyed crowns with a digitally designed mesial rest seat; and Group 3 comprised surveyed crowns with a hand-modified mesial rest seat. Then, with all the crowns cemented to metal dies, the specimens were subjected to a fracture resistance test using a universal testing machine (Model 8501 Instron, Norwood, MA, USA). Results Surveyed crowns without any rest seat and those with digitally created and hand-modified rest seats displayed different fracture resistances: crowns with no rest seat offered the highest fracture resistance (5831 ± 895.15 N), followed by those with a digitally designed and milled rest seat (5280 ± 1673.33 N). Crowns with a hand-modified rest seat provided the lowest fracture resistance (4976 ± 322.5 N). Based on our results, surveyed crowns without a rest seat displayed higher fracture resistance than those with a rest seat. Conclusion The fracture resistance of crowns with a digitally designed and milled rest seat was statistically similar to that of control crowns with no rest seat, whereas hand-modified rest seats significantly reduced the fracture resistance of surveyed zirconia crowns.
RESUMEN
BACKGROUND: Sexual assault (SA) is alarmingly prevalent, yet reporting rates remain disproportionately low. Forensic examinations (FE) play a crucial role in both immediate medical care and evidence collection, yet many victims/survivors may not report the crime initially, leading to the loss of vital forensic evidence. The storage of evidence "Option 3â³ care alternative provides post-SA care including FE without initial police involvement. METHODS: This is a cross-sectional study analysing the attendances of people who chose to store evidence at the Dublin Sexual assault Treatment Unit (SATU) between January 1, 2017 and December 31, 2023. RESULTS: There were 238 storage of evidence FEs ('Option 3') performed during the study period, which represented 12.8 % of all FEs. The majority identified as female (89.1 %), with an average age of 26.6 years. 31.9 % attended within 24 h of the incident, and 51.3 % self-referred. Most assaults occurred over weekends (64.7 %), with alcohol consumption reported in 82.2 % of cases and drug-facilitated SA concerns in 20.2 %. Genital injuries were present in 17.9 % of females and 19 % of males. Those that availed of storage of evidence (compared with those who initially reported to the police) were significantly more likely to have consumed alcohol (p < 0.001) and the assault was more likely to have occurred indoors (p = 0.002). There was no significant difference in care option choice for those 'unsure' of the assault occurrence (p = 0.353). Among storage of evidence cases, 20.2 % subsequently reported to the police, with females more likely to report (p = 0.02), while people who were uncertain whether an assault had occurred were less likely to report (p = 0.04). Genital injury (p = 0.822), victim-assailant relationship (p = 0.465), assault location (p = 0.487), and substance consumption (p = 0.332) did not significantly affect subsequent reporting rates. CONCLUSIONS: The availability of storage of evidence has afforded people the opportunity to access prompt, responsive SATU care including collection of forensic evidence which may have significant evidential value. This approach provides further opportunity for comprehensive detection of a crime, even if reporting to the police is delayed.
RESUMEN
BACKGROUND Dentin contamination with hemostatic agents before bonding indirect restorations negatively affects the bond strength. However, the consensus on which materials could be used to clean contamination of hemostatic agents has not been explored. The aim of this study was to assess the effect of Katana Cleaner applied on the surface of dentin contaminated with hemostatic agents on the shear bond strength (SBS) of self-adhesive resin cement by comparing it with three other surface cleaners. MATERIAL AND METHODS Ninety dentin specimens were divided into a no contamination group (control) (n=10), 4 groups contaminated with 25% aluminum chloride (Viscostat Clear) (n=40), and 4 groups contaminated with 20% ferric sulfate (Viscostat) (n=40). Subsequently, 4 different cleaners were used for each contamination group (water rinse, phosphoric acid, chlorhexidine, and Katana Cleaner). Then, self-adhesive resin cement was directly bonded to the treated surfaces. All specimens were subjected to 5000 thermal cycles of artificial aging. The shear bond strength was measured using a universal testing machine. RESULTS Two-way analysis of variance showed that the contaminant type as the main factor was statistically non-significant (p=0.655), cleaner type as the main factor was highly significant (p<0.001), and interaction between the contaminant and cleaner was non-significant (p=0.51). The cleaner type was the main factor influencing the bond strength. Phosphoric acid and chlorhexidine showed better performance than Katana Cleaner. CONCLUSIONS Cleaning dentin surface contamination with phosphoric acid and chlorhexidine had better performance than with Katana Cleaner.
Asunto(s)
Recubrimiento Dental Adhesivo , Dentina , Hemostáticos , Cementos de Resina , Resistencia al Corte , Humanos , Dentina/efectos de los fármacos , Hemostáticos/farmacología , Recubrimiento Dental Adhesivo/métodos , Clorhexidina/análogos & derivados , Clorhexidina/farmacología , Ensayo de Materiales/métodos , Propiedades de Superficie/efectos de los fármacos , Recubrimientos Dentinarios , Compuestos Férricos/químicaRESUMEN
Aim: Erectile dysfunction (ED) is marked by a recurring incapacity to achieve or uphold a satisfactory erection during sexual activities. The study aims to increase awareness about male reproductive health, dispel misconceptions about ED and encourage physician-patient discussions. Materials & methods: A live online poll was conducted during a 3-day webinar titled "Turning the Tide of Men's Health" organized by Viatris™ in collaboration with the Saudi Society of Family and Community Medicine and attended by healthcare professionals (HCPs) from diverse specialties. The attendees voluntarily responded to nine poll questions on adherence to ED medication, use of phosphodiesterase type 5 inhibitors (PDE5is) as cure versus management of ED and patients' challenges. The responses to the poll questions were recorded and assessed to understand the perceptions of HCPs. Results: The poll garnered 10,423 responses from 5831 attendees on the second day of the webinar. The key findings included HCPs' perceptions that PDE5is contribute to ED management not complete cure. The respondents acknowledged that adherence to ED medications might decline on days without planned sexual activity, and long-term adherence on a daily PDE5i is exhibited by a relatively modest percentage of ED patients. The consensus among respondents was that PDE5is do not enhance or generate sexual desire, and the daily schedule of ED treatment may be burdensome for some patients. Conclusion: The findings from this poll offer insights into the perspectives of HCPs regarding the usage of PDE5is to treat ED. Responders of the poll generally agreed that PDE5is can help manage ED without affecting desire, though adherence may be lower on days without planned sexual activity. Furthermore, most respondents acknowledged that adhering to a daily pill regimen posed a greater burden than waiting for the medication to take effect.
Asunto(s)
Actitud del Personal de Salud , Disfunción Eréctil , Inhibidores de Fosfodiesterasa 5 , Humanos , Masculino , Disfunción Eréctil/tratamiento farmacológico , Inhibidores de Fosfodiesterasa 5/uso terapéutico , Cumplimiento de la Medicación/estadística & datos numéricos , Personal de Salud/estadística & datos numéricos , Adulto , Persona de Mediana Edad , Encuestas y CuestionariosRESUMEN
Aeromonas hydrophila, a gram-negative coccobacillus bacterium, can cause various infections in humans, including septic arthritis, diarrhea (traveler's diarrhea), gastroenteritis, skin and wound infections, meningitis, fulminating septicemia, enterocolitis, peritonitis, and endocarditis. It frequently occurs in aquatic environments and readily contacts humans, leading to high infection rates. This bacterium has exhibited resistance to numerous commercial antibiotics, and no vaccine has yet been developed. Aiming to combat the alarmingly high infection rate, this study utilizes in silico techniques to design a multi-epitope vaccine (MEV) candidate against this bacterium based on its aerolysin toxin, which is the most toxic and highly conserved virulence factor among the Aeromonas species. After retrieval, aerolysin was processed for B-cell and T-cell epitope mapping. Once filtered for toxicity, antigenicity, allergenicity, and solubility, the chosen epitopes were combined with an adjuvant and specific linkers to create a vaccine construct. These linkers and the adjuvant enhance the MEV's ability to elicit robust immune responses. Analyses of the predicted and improved vaccine structure revealed that 75.5%, 19.8%, and 1.3% of its amino acids occupy the most favored, additional allowed, and generously allowed regions, respectively, while its ERRAT score reached nearly 70%. Docking simulations showed the MEV exhibiting the highest interaction and binding energies (-1,023.4 kcal/mol, -923.2 kcal/mol, and -988.3 kcal/mol) with TLR-4, MHC-I, and MHC-II receptors. Further molecular dynamics simulations demonstrated the docked complexes' remarkable stability and maximum interactions, i.e., uniform RMSD, fluctuated RMSF, and lowest binding net energy. In silico models also predict the vaccine will stimulate a variety of immunological pathways following administration. These analyses suggest the vaccine's efficacy in inducing robust immune responses against A. hydrophila. With high solubility and no predicted allergic responses or toxicity, it appears safe for administration in both healthy and A. hydrophila-infected individuals.
Asunto(s)
Inteligencia Artificial , Toxinas Bacterianas , Proteínas Citotóxicas Formadoras de Poros , Vacunas , Humanos , Aeromonas hydrophila , Diarrea , Viaje , Aprendizaje Automático , Epítopos de Linfocito T , Adyuvantes Inmunológicos , Adyuvantes FarmacéuticosRESUMEN
The bacterial cell wall, being a vital component for cell viability, is regarded as a promising drug target. The L, D-Transpeptidase YcbB enzyme has been implicated for a significant role in cell wall polymers cross linking during typhoid toxin release, ß-lactam resistance and outer membrane defect rescue. These observations have been recorded in different bacterial pathogens such as Salmonella Typhimurium, Citrobacter rodentium, and Salmonella typhi. In this work, we have shown structure based virtual screening of diverse natural and synthetic drug libraries against the enzyme and revealed three compounds as LAS_32135590, LAS_34036730 and LAS-51380924. These compounds showed highly stable energies and the findings are very competitive with the control molecule ((1RG or (4 R,5S)-3-({(3S,5S)-5-[(3-carboxyphenyl)carbamoyl]pyrrolidin-3-yl}sulfanyl)-5-[(1S,2R)-1-formyl-2-hydroxypropyl]-4-methyl-4,5-dihydro-1H-pyrrole-2-carboxylic acid or ertapenem)) used. Compared to control (which has binding energy score of -11.63 kcal/mol), the compounds showed better binding energy. The binding energy score of LAS_32135590, LAS_34036730 and LAS-51380924 is -12.63 kcal/mol, -12.22 kcal/mol and -12.10 kcal/mol, respectively. Further, the docked snapshot of the lead compounds and control were investigated for stability under time dependent dynamics environment. All the three leads complex and control system showed significant equilibrium (mean RMSD < 3 Å) both in term of intermolecular docked conformation and binding interactions network. Further validation on the complex's stability was acquired from the end-state MMPB/GBSA analysis that observed greater contribution from van der Waals forces and electrostatic energy while less contribution was noticed from solvation part. The compounds were also showed good drug-likeness and are non-toxic and non-mutagenic. In short, the compounds can be used in experimental testing's and might be subjected to structure modification to get better results.Communicated by Ramaswamy H. Sarma.
RESUMEN
Programmed cell death ligand 1 (PD-L1) is a crucial target for cancer therapy. Here, an in silico study investigates PD-L1 to inhibit its interaction with PD1, thereby promoting an immune response to eliminate cancer cells. The study employed machine learning (ML) -based QSAR to detect PDL1 inhibitors. Morgan's fingerprint with docking score showed a 0.83 correlation with the experimental IC50, enabling the screening of 3200 natural compounds. The top three compounds, considered 2819, 2821 and 3188, were selected from the ML-based QSAR and subjected to molecular docking and simulation. The binding scores for 2819, 2821 and 3188 were -7.0, -9.0 and -8.9 kcal/mol, respectively. The stability of the ligands during a 100 ns simulation was assessed using RMSD, showing that 2819 and 2821 maintained stable patterns comparable to the control inhibitor. Notably, 2819 exhibited a consistent stable pattern throughout the simulation, while 2821 showed stability in the last 40 ns. The control compound showed the highest number of hydrogen bonds with proteins, whereas compounds 2819 and 2821 formed continuous H-bonds. 3188 was separated from the protein in later phases and is not regarded as a potential PD-L1-binding molecule. MMGBSA binding free energy for complexes was computed. Control had the lowest binding free energy, while 2819 and 2821 also had lower binding energies. In contrast, 3188 showed poor binding free energy, causing protein separation. Principal component analysis showed a loss of entropy and reduced protein conformational variation. Overall, 2819 and 2821 are potential binders for PD-L1 inhibition and immune response triggering.Communicated by Ramaswamy H. Sarma.
RESUMEN
BACKGROUND: Various methods can be used for creating zirconia dental restorations, including 3-dimensional (3D) printing and computer-aided design/ computer-aided manufacturing (CAD/CAM) milling. The fused deposition modeling (FDM) printing method for zirconia presents numerous advantages, albeit research on the mechanical properties of these materials and resultant restorations remains scarce. Such developments are undeniably intriguing and warrant further investigation. The objective of the present study was to evaluate the impact of the sintering firing cycle (Conventional vs. Speed sintering) on the flexural strength, flexural modulus, and Vickers Microhardness of milled vs. FDM printed zirconia. METHODS: A total of 60 bars (2 × 5 × 27 mm) were fabricated for flexural strength testing, along with 40 discs (12 × 1.5 mm) for Vickers microhardness testing. Half of the specimens underwent conventional sintering, while the other half underwent a speed sintering cycle. The flexural strength and modulus were determined by a three-point bending test in a universal testing machine. The microhardness of the specimens was evaluated using a Vickers microhardness tester. Statistical analysis was performed using a two-way ANOVA test with a post-hoc Tukey test (p < 0.05). RESULTS: CAD/CAM milled zirconia had significantly higher flexural strength and modulus than FDM-printed zirconia. The sintering process did not significantly affect the flexural strength or modulus of milled or FDM-printed zirconia. The milled speed sintering group had significantly higher values in the Vickers microhardness test compared to the other groups. CONCLUSIONS: The mechanical properties of FDM-printed zirconia specimens were not found to be comparable to those of milled zirconia. Speed sintering cycle may produce milled zirconia restorations with similar flexural strength and modulus to conventional sintering, and even higher Vickers Microhardness values.
Asunto(s)
Diseño Asistido por Computadora , Resistencia Flexional , Humanos , Análisis de Varianza , Impresión TridimensionalRESUMEN
The Marburg virus (MBV), a deadly pathogen, poses a serious threat to world health due to the lack of effective treatments, calling for an immediate search for targeted and efficient treatments. In this study, we focused on compounds originating from marine fungi in order to identify possible inhibitory compounds against the Marburg virus (MBV) VP35-RNA binding domain (VP35-RBD) using a computational approach. We started with a virtual screening procedure using the Lipinski filter as a guide. Based on their docking scores, 42 potential candidates were found. Four of these compounds-CMNPD17596, CMNPD22144, CMNPD25994, and CMNPD17598-as well as myricetin, the control compound, were chosen for re-docking analysis. Re-docking revealed that these particular compounds had a higher affinity for MBV VP35-RBD in comparison to the control. Analyzing the chemical interactions revealed unique binding properties for every compound, identified by a range of Pi-cation interactions and hydrogen bond types. We were able to learn more about the dynamic behaviors and stability of the protein-ligand complexes through a 200-nanosecond molecular dynamics simulation, as demonstrated by the compounds' consistent RMSD and RMSF values. The multidimensional nature of the data was clarified by the application of principal component analysis, which suggested stable conformations in the complexes with little modification. Further insight into the energy profiles and stability states of these complexes was also obtained by an examination of the free energy landscape. Our findings underscore the effectiveness of computational strategies in identifying and analyzing potential inhibitors for MBV VP35-RBD, offering promising paths for further experimental investigations and possible therapeutic development against the MBV.
Asunto(s)
Enfermedad del Virus de Marburg , Animales , Motivos de Unión al ARN , Hongos , Enlace de Hidrógeno , Simulación de Dinámica MolecularRESUMEN
Radical cure of Plasmodium vivax malaria must include elimination of quiescent 'hypnozoite' forms in the liver; however, the only FDA-approved treatments are contraindicated in many vulnerable populations. To identify new drugs and drug targets for hypnozoites, we screened the Repurposing, Focused Rescue, and Accelerated Medchem (ReFRAME) library and a collection of epigenetic inhibitors against P. vivax liver stages. From both libraries, we identified inhibitors targeting epigenetics pathways as selectively active against P. vivax and P. cynomolgi hypnozoites. These include DNA methyltransferase (DNMT) inhibitors as well as several inhibitors targeting histone post-translational modifications. Immunofluorescence staining of Plasmodium liver forms showed strong nuclear 5-methylcystosine signal, indicating liver stage parasite DNA is methylated. Using bisulfite sequencing, we mapped genomic DNA methylation in sporozoites, revealing DNA methylation signals in most coding genes. We also demonstrated that methylation level in proximal promoter regions as well as in the first exon of the genes may affect, at least partially, gene expression in P. vivax. The importance of selective inhibitors targeting epigenetic features on hypnozoites was validated using MMV019721, an acetyl-CoA synthetase inhibitor that affects histone acetylation and was previously reported as active against P. falciparum blood stages. In summary, our data indicate that several epigenetic mechanisms are likely modulating hypnozoite formation or persistence and provide an avenue for the discovery and development of improved radical cure antimalarials.
RESUMEN
Deltamethrin is one of the most effective pyrethroid compounds, widely employed in veterinary medicine, public health, and farming. Deltamethrin-triggered oxidative stress largely causes serious harm to an organism. Acute toxicity of this compound was extensively investigated, while less information is available on its oral sub-acute effects. This study assessed, in the male Albino rats, the effects of oral gavage of either 0.874 mg/kg (0.01 LD50) or 8.740 mg/kg (0.10 LD50) of deltamethrin for successive 14 days to investigate its effects on biomarkers and to detect the tissue injury in rats following subacute deltamethrin treatment. It was found that levels of glutathione peroxidase, superoxide dismutase, and catalase in the brain, kidney, and liver, alkaline phosphatase (ALP), and uric acid in serum, hematocrit, mean corpuscular volume (MCV), white blood cells (WBC)s, eosinophils, and basophils were significantly reduced compared with untreated rats. However, when rats were treated with deltamethrin for successive 14 days, alanine aminotransferase (ALT) and lactate dehydrogenase (LDH) activities in serum and the levels of thiobarbituric acid reactive substances (TBARs) in brain, kidney, and liver, red blood cell distribution width (RDW-CV), total protein, monocytes, and basophils and the ratios of neutrophils to lymphocytes, an aggregated marker of systemic inflammation and systemic immune inflammation indexes, significantly increased compared with the control group. Histologic lesions were observed in the liver, kidney, brain, testis, and epidemies in rats exposed to subacute deltamethrin for 14 days, and most tissues of rats treated with 0.10 LD50 of deltamethrin were more affected than those treated with 0.01 LD50. These findings strongly suggest that subacute exposure to deltamethrin caused significant systemic toxicity through oxidative stress resulting in biochemical and histological changes in the studied tissues. These findings highlight the potential harmful effects of deltamethrin and emphasize the importance of understanding the subacute effects of this compound, particularly in the context of veterinary medicine, public health, and farming.
Asunto(s)
Antioxidantes , Piretrinas , Ratas , Masculino , Animales , Antioxidantes/farmacología , Piretrinas/toxicidad , Estrés Oxidativo , Riñón , Inflamación/metabolismo , Hígado , Biomarcadores/metabolismo , Peroxidación de LípidoRESUMEN
INTRODUCTION: Magnesium oxide nanoparticles (MgO NPs) have a variety of applications that have contributed to their elevated popularity, however, the safety and toxic effects on humans are also of concern with these increased applications. There is insufficient data regarding the effect of MgO NPs on reproductive organs, which are crucial aspects to the body's vital physiological functions. The present study was undertaken in male and female rats to assess the reproductive toxicological potential of two doses (low versus high) of MgO NPs on testicular and ovarian tissues. The toxicity was evaluated using histological, hormonal, and oxidative parameters. MATERIAL AND METHODS: In this work, magnesium oxide nanoparticles (MgO NPs) were synthesized by the sol-gel route and were characterized by X ray diffraction analysis (XRD) and Fourier transform infra-red spectroscopy (FTIR). Forty-eight adult Wister albino rats were used in this experiment which were divided into groups of male and female, and then further into control, low dose MgO NPs, and high dose MgO NPs. The low dose used was 131.5 mg/kg b.w. (1/10 LD50) while the high dose used was 263 mg/kg b.w. (1/5 LD50). All doses were given orally by gastric tube. After 4 weeks, blood samples were collected to investigate the level of sex hormones and both ovarian and testicular tissues were examined for variable oxidative parameters and histopathological changes by light microscopy. RESULTS: The obtained findings showed that high dose of MgO NPs produced considerable changes in sex hormones and stress parameters in both male and female rats in comparison to the low dose and control groups. Histomorphometric analysis demonstrated the presence of histopathological alterations in the testicular and ovarian tissues. CONCLUSION: The results of this study showed dose-dependent adverse effects of MgO NPs on the testis and ovary both functionally and histopathologically as compared to the control rats.
Asunto(s)
Óxido de Magnesio , Nanopartículas del Metal , Ratas , Masculino , Humanos , Femenino , Animales , Óxido de Magnesio/toxicidad , Nanopartículas del Metal/toxicidad , Nanopartículas del Metal/química , Ratas Wistar , Genitales , Hormonas Esteroides GonadalesRESUMEN
The emergence of digital dentistry has led to the introduction of various three-dimensional (3D) printing materials in the market, specifically for provisional fixed restoration. This study aimed to undertake a systematic review of the published literature on the Mechanical Properties of 3D- Printed Provisional Resin Materials for crown and fixed dental prosthesis (FDP). The electronic database on PubMed/Medline was searched for relevant studies. The search retrieved articles that were published from January 2011 to March 2023. The established focus question was: "Do provisional 3D-printed materials have better mechanical properties than conventional or milled provisional materials?". The systematically extracted data included the researcher's name(s), publication year, evaluation method, number of samples, types of materials, and study outcome. A total of 19 studies were included in this systematic review. These studies examined different aspects of the mechanical properties of 3D-printed provisional materials. Flexural Strength and Microhardness were the frequently used mechanical testing. Furthermore, 3D-printed provisional restorations showed higher hardness, smoother surfaces, less wear volume loss, and higher wear resistance compared to either milled or conventional, or both. 3D-printed provisional resin materials appear to be a promising option for fabricating provisional crowns and FDPs.
RESUMEN
OBJECTIVES: To compares the endoclose technique (ET) techniques and surgicel plug technique (SPT) in terms of port-site related complications. Minimally invasive surgeries (MIS) are widely performed nowadays, nonetheless, port-site closure technique plays a role in the prevention of port-site related complications. METHODS: This retrospective study was carried out at general surgery and urology departments of King Fahad Medical City, Saudi Arabia. Variables that were collected include age, gender, height, weight, body mass index, co-morbidities, type and date of surgery, intraoperative visceral injury or bleeding, technique cost, and port-site post-operative complications (hernia, infection, bleeding, dehiscence, and hypertrophic scarring). Data was collected from electronic medical records. Patients included are whom underwent any minimally invasive procedure from the beginning of 2014 until the end of September 2020. Follow up period was at least for 2 years. RESULTS: We analyzed 397 patients. Surgicel plug technique was more of having hernia (2.3%) than of ET (0%). While ET was more on infection (0.9%) than in SPT, but no significant difference being observed (p=0.064). CONCLUSION: There is no significant difference between the ET and the novel SPT in terms of port-site related complications.
Asunto(s)
Laparoscopía , Procedimientos Quirúrgicos Robotizados , Humanos , Estudios Retrospectivos , Procedimientos Quirúrgicos Robotizados/métodos , Laparoscopía/efectos adversos , Laparoscopía/métodos , HerniaRESUMEN
Bladder cancer is considered the most prevalent malignancy affecting the urinary tract system. Urothelial carcinoma, also known as transitional cell carcinoma (TCC), can arise from the entire urinary tract, with the bladder considered the primary site of origin and representing 95% of all cases. The management of TCC of the upper urinary tract is mainly by nephroureterectomy (NU). To our knowledge, there are no data regarding single-docking robotic-assisted NU following cystectomy with an ileal conduit. Therefore, in this study, we are reporting a case of single-docking robotic-assisted NU in a patient who previously underwent open cystectomy with an ileal conduit. A case of a 57-year-old female diagnosed with bladder cancer 10 years ago and underwent several transurethral resections of bladder tumor (TURBT) sessions presented for the first time in 2019, complaining of hematuria and dropping in the hemoglobin, which was not improving with multiple TURBT. For that, the patient underwent an open radical cystectomy with an ileal conduit. During the follow-up in 2021, computed tomography (CT) of the pelvis and abdomen with intravenous (IV) contrast showed a 7 mm enhancing lesion in the right proximal ureter, which was suspicious of proximal ureter mass. In 2022, the patient was again seen in the outpatient clinic; a CT of the pelvis and abdomen with IV contrast was done and demonstrated a significant progression of the mass size to 2 x 1.5 cm, with no other intraabdominal or intrathoracic lesions. For that, she underwent a single-docking robotic-assisted NU. To conclude, performing a single-docking robotic-assisted NU in a patient who previously underwent open radical cystectomy with an ileal conduit is challenging due to multiple adhesion and altered anatomy. More studies need to be published regarding the long-term outcomes of such procedures.
RESUMEN
Geosmin and 2-methylisoborneol (2-MIB) are amongst the most common earthy and musty taste and odour (T&O) compounds found in drinking water. With low odour threshold detection limits below 10 ng L-1, and the complexity of raw water matrices, these two compounds provide a significant challenge for water companies globally. In this research, for the first time, a novel and fully automated micro-solid phase-extraction (µSPE) method coupled with gas chromatography (GC)-mass spectrometry (MS) has been developed for the detection of geosmin and 2-MIB for drinking water analysis. The new automated method described herein is environmentally friendly requiring low raw water sample volumes, of 25 mL, and only 50 µL of elution solvent. Our µSPE-GC-MS method exhibits excellent linearity for both compounds (R2 > 0.999) and low limits of detection of 2.0 ng L-1 and 4.3 ng L-1 for geosmin and 2-MIB, respectively. The method showed excellent recovery rates (95.1-100.1%) and good precision (RSD < 7%) in raw sample matrices. Our approach is fully automated onto a robotic workstation which can be readily integrated into a laboratory workflow for routine water analysis. Furthermore, the method has excellent potential to be incorporated within a portable system for onsite analysis.
Asunto(s)
Agua Potable , Cromatografía de Gases y Espectrometría de Masas , Extracción en Fase SólidaRESUMEN
OBJECTIVES: To identify factors influencing successful international travel among patients with psychotic illness. METHODS: Eight individuals participated in a semi-structured interview of 15-20-minute duration with a clinician in relation to their recent experience of international travel. Clinical files were reviewed and a case series was compiled. RESULTS: Four individuals engaged in international travel without any adverse effects. Four other individuals experienced significant psychotic and/or affective symptoms while travelling. Treatment non-adherence, a lack of awareness of how to obtain support and limited or no pre-travel planning were noted in these individuals. CONCLUSIONS: Pre-travel counselling, treatment adherence, provision of information packages relating to their mental illness and having contact details of their treating mental health team increase the likelihood of successful international travel in patients with psychotic illness. Travelling with a companion may reduce fear of relapse.
Asunto(s)
Trastornos Mentales , Humanos , Trastornos Mentales/terapia , Pacientes , InvestigaciónRESUMEN
Background Childhood obesity is an alarming health problem. Early feeding habits and factors are among the etiological factors contributing to obesity. Objectives The objective of this study is to evaluate the correlation between breastfeeding, alongside other relevant factors, and their potential role as preventative measures against obesity. Methods A cross-sectional hospital-based study was conducted on children who attended a pediatric clinic. Demographic, clinical, and anthropometric measurements were taken from the hospital records. A questionnaire was completed by parents telephonically. Overweight was identified as a body mass index (BMI) of > 85-95% and obesity as a BMI of > 95%. Results A total of 101 children, with a mean age of 8.88 ± 4.01 (range one to 18) years, were involved, of whom 58.4% were boys. A high BMI (overweight or obese) was found in 30 (29.7%) children. The highest BMIs were among soft drink consumers [two children (66.7%) consumed daily and eight children (40%) consumed monthly], high birth weight in two children (40%), cow's milk formula feeding in eight children (38%), and weekly fast food consumption in 18 children (35%), none of these were statistically significant. Nevertheless, there was a significant association between mean electronic device usage and high (204.5 ± 164.76 hours) and normal BMI (147.61 ± 110.24 hours) (p-value < 0.05). Conclusion This small cross-sectional study shows that almost one-third of the included children were overweight or obese, which is comparable to what has been published in the literature. Moreover, there was a potential link between some factors and obesity, especially screen time, which may contribute to the controversial literature.
RESUMEN
In hot and humid climates, a significant part of the energy is used to cool the building. There are several ways to reduce this air conditioning load, but one standout is through the selection and design of the right building envelope and its components. The thermal characteristics of the building envelope, in particular the thermal resistance of the insulation used, have an impact on the thermal and energy performance of building structures. Thermal conductivity, which indicates the ability of heat to move through a material given a temperature difference, is the primary factor affecting the performance of a thermal insulation material. Both temperature and humidity changes can affect a material's thermal conductivity value, which can then change. In fact, due to the fluctuating ambient air temperature and solar radiation, thermal insulation in buildings is susceptible to significant and continuous temperature variations. Thermal insulation used in building walls and roofs helps to reduce the energy demand of the building. It improves thermal comfort and, if used correctly, reduces the operational cost of the building. The present study has focused on the effects of location and insulation material on the energy performance of a residential building by considering five climatic locations in the Kingdom of Saudi Arabia (KSA). Five commonly used insulation materials with different thermal characteristics, namely polyurethane board (PU), expanded polystyrene (EPS), glass wool (GW), urea-formaldehyde foam (UFF), and expanded perlite (EP), were analyzed under various climatic zones as per the Saudi Building Code 601/602. The selected cities were categorized based on cooling degree days (CDD) and outdoor dry bulb temperature (DBT) as hot, very hot, and extremely hot climatic zones. Insulation improves thermal comfort and, if used correctly, reduces running costs. Experiments were conducted to determine the thermal conductivity, and the energy simulation was performed by employing IES-VE software for various insulation options. The findings indicate that the location has a significant impact on the energy performance of the insulating materials. The energy saving potential of polyurethane board (PU) insulation is more attractive in cities with higher DBTs and CDDs than in cities with lower DBTs and CDDs. The benefit of installing insulation ranged from a 2 to 14% decrease in energy demand for the climate zones studied. The sensitivity analysis showed that the energy saving potential of the insulation materials is sensitive to the set-point temperature (ST) band.
RESUMEN
The aim of this study was to investigate the effect of repressing leftover heat-pressed lithium disilicate material on its mechanical and optical properties. A lithium disilicate ingot (IPS e.max® Press, IvoclarVivadent, Schaan, Liechtenstein) shade (A1) low translucency was first heat-pressed to yield ceramic bars and disks. Then, the second and third presses were fabricated from the leftovers of the previous pressing cycles. A total of 36 bars and 15 disk specimens were fabricated and divided into three groups according to the number of pressing cycles (n = 12 bars and n = 5 disks): P1: first press (control), P2: second press, and P3: third press. The specimens were tested for flexural strength, color change, Vickers hardness, and surface topography under scanning electron microscopy. One-way ANOVA testing was used to evaluate flexural strength and hardness, while an independent t-test was performed to evaluate color change. There was no significant difference in flexural strength as the number of heat-pressed cycles increased (p = 0.283). Similarly, there was no significant difference in the microhardness values between all groups (p = 0.220). The overall color change ∆E between P1-P2 and P1-P3 were 2.01 and 2.14, respectively. The SEM images showed evenly distributed and densely packed lithium disilicate crystals in the P1 group. However, larger and less densely packed crystals were noticeable in P2 and P3. The IPS e.max Press could be repressed up to two times without an adverse effect on mechanical properties or color stability. These results may support the reuse of pressed lithium disilicate for economical purposes, but further clinical evaluation should be conducted to confirm these findings.