RESUMEN
PURPOSE: Linear accelerator quality assurance (QA) in radiation therapy is a time consuming but fundamental part of ensuring the performance characteristics of radiation delivering machines. The goal of this work is to develop an automated and standardized QA plan generation and analysis system in the Oncology Information System (OIS) to streamline the QA process. METHODS: Automating the QA process includes two software components: the AutoQA Builder to generate daily, monthly, quarterly, and miscellaneous periodic linear accelerator QA plans within the Treatment Planning System (TPS) and the AutoQA Analysis to analyze images collected on the Electronic Portal Imaging Device (EPID) allowing for a rapid analysis of the acquired QA images. To verify the results of the automated QA analysis, results were compared to the current standard for QA assessment for the jaw junction, light-radiation coincidence, picket fence, and volumetric modulated arc therapy (VMAT) QA plans across three linacs and over a 6-month period. RESULTS: The AutoQA Builder application has been utilized clinically 322 times to create QA patients, construct phantom images, and deploy common periodic QA tests across multiple institutions, linear accelerators, and physicists. Comparing the AutoQA Analysis results with our current institutional QA standard the mean difference of the ratio of intensity values within the field-matched junction and ball-bearing position detection was 0.012 ± 0.053 (P = 0.159) and is 0.011 ± 0.224 mm (P = 0.355), respectively. Analysis of VMAT QA plans resulted in a maximum percentage difference of 0.3%. CONCLUSION: The automated creation and analysis of quality assurance plans using multiple APIs can be of immediate benefit to linear accelerator quality assurance efficiency and standardization. QA plan creation can be done without following tedious procedures through API assistance, and analysis can be performed inside of the clinical OIS in an automated fashion.
Asunto(s)
Aceleradores de Partículas , Radioterapia de Intensidad Modulada , Automatización , Humanos , Fantasmas de Imagen , Garantía de la Calidad de Atención de Salud , Dosificación Radioterapéutica , Planificación de la Radioterapia Asistida por Computador , Programas InformáticosRESUMEN
PURPOSE: To evaluate the repeatability of MRI and CT derived texture features and to investigate the feasibility of use in predictive single and multi-modality models for radiotherapy of non-small cell lung cancer. Methods: Fifty-nine texture features were extracted from unfiltered and wavelet filtered images. Repeatability of test-retest features from helical 4D CT scans, true fast MRI with steady state precession (TRUFISP), and volumetric interpolation breath-hold examination (VIBE) was determined by the concordance correlation coefficient (CCC). A workflow was developed to predict overall survival at 12, 18, and 24 months and tumour response at end of treatment for tumour features, and normal muscle tissue features as a control. Texture features were reduced to repeatable and stable features before clustering. Cluster representative feature selection was performed by univariate or medoid analysis before model selection. P-values were corrected for false discovery rate. Results: Repeatable (CCC ≥ 0.9) features were found for both tumour and normal muscle tissue: CT: 54.4% for tumour and 78.5% for normal tissue, TRUFISP: 64.4% for tumour and 67.8% for normal tissue, and VIBE: 52.6% for tumour and 72.9% for normal muscle tissue. Muscle tissue control analysis found 7 significant models with 6 of 7 models utilizing the univariate representative feature selection technique. Tumour analysis revealed 12 significant models for overall survival and none for tumour response at end of treatment. The accuracy of significant single modality was about the same for MR and CT. Multi-modality tumour models had comparable performance to single modality models. Conclusion: MR derived texture features may add value to predictive models and should be investigated in a larger cohort. Control analysis demonstrated that the medoid representative feature selection method may result in more robust models. .