Dissolution enhancement of Gefitinib by solid dispersion and complexation with ß-cyclodextrins: In vitro testing, cytotoxic activity, and tablet formulation.

Cancer is the leading cause of mortality worldwide. In patients with metastatic non-small cell lung cancer, epidermal growth factor receptor (EGFR) is often overexpressed. Gefitinib (GEF), an inhibitor of EGFR, is approved for the treatment of patients with metastatic non-small cell lung cancer (NSCLC). However, the low solubility and dissolution of GEF limits its bioavailability. Numerous methods, including solid dispersion (SD) and complexation, have been reported to enhance the dissolution of poorly soluble drugs. In this study, GEF complexes were prepared using methyl-ß-cyclodextrin (MßCD) and hydroxypropyl-ß-cyclodextrin (HPßCD) in two molar ratios (1:1 and 1:2), furthermore, GEF SDs were prepared using polyvinylpyrrolidone (PVP), polyethylene glycol (PEG), and poloxamer-188(PXM) in three different ratios (1:2, 1:4 and 1:6 w/w). Dissolution studies were conducted on the prepared formulations. Dissolution results showed a 1.22-2.17-fold enhancement in drug dissolution after one hour compared to untreated GEF. Two formulations that showed higher dissolution enhancement were subsequently evaluated for in-vitro cytotoxicity and were formulated into tablets. The selected PVP-GEF (1:4 w/w) and MßCD-GEF (1:1M) formulas displayed improved cytotoxicity compared to untreated GEF. The IC50 values of the PVP-GEF and MßCD-GEF were 4.33 ± 0.66 and 4.84 ± 0.38 µM, respectively which are significantly lower (p < 0.05) than free GEF. In addition, the formulated tablets exhibited enhanced dissolution compared to pure GEF tablets. PVP-GEF SD tablets released (35.1 %±0.4) of GEF after one hour, while GEF-MßCD tablets released (42.2 % ± 0.7) after one hour. In the meantime, tablets containing pure GEF showed only 15 % ± 0.5 release at the same time. The findings of this study offer valuable insights for optimizing the dissolution and hence therapeutic capabilities of GEF while mitigating its limitations.

Design, synthesis and molecular modeling of isatin-aminobenzoic acid hybrids as antibacterial and antibiofilm agents.

Number of factors, including newly emerging infectious diseases and an increase in multi-drug resistant microbial pathogens with particular relevance for Gram-positive bacteria, make the treatment of infectious diseases in hospital-based healthcare a major challenge in the medical community. 4-Aminobenzoic acid (PABA), has demonstrated a variety of biological actions particularly, antimicrobial activity. In our study we coupled this vitamin-like molecule with different isatin derivatives. We investigated the antibacterial activity of the synthesized Schiff's bases. The compounds showed high selective activity against Gram-positive bacteria and showed weak or no activity against both Gram-negative bacteria and fungi. Compound 2a showed highest activity against S. aureus and B. subtilis (MIC 0.09 mmol/L). Additionally, these substances exhibit strong anti-B. Subtilis biofilm formation. We were able to shed insight on the binding mode of these new inhibitors using in silico docking of the compounds in the binding sites of a 3D structure of B. subtilis histidine kinase/Walk. The binding free energy of the compound 2a to the catalytic domain walk, of histidine kinase enzyme of B. subtilis bacteria, was calculated using molecular mechanics/generalized born surface area scoring. The key residues for macromolecule-ligand binding were postulated. The optimized 3D protein-ligand binding modes shed light on the B. subtilis HK/Walk-ligand interactions that afford a means to assess binding affinity to design new HK/Walk inhibitor as antibacterial agents.

Design and Optimization of Lornoxicam Dispersible Tablets Using Quality by Design (QbD) Approach.

The present study aims to design and optimize the lornoxicam dispersible tablet (LXDT) formulation using the Quality by design (QbD) approach. A randomized Box-Behnken experimental design was used to characterize the effect of the critical factors, such as filler (MCC/Mannitol) ratio, mixing time, and disintegrant concentration, and assessed for their impacts on the critical quality attributes (responses), including dispersibility time, friability, dissolution efficiency, and content uniformity, respectively. The drug-excipients interaction of the formulation was investigated using FTIR and DSC, respectively. The accelerated stability study at 40 °C/75% relative humidity was performed. FTIR revealed an absence of any significant chemical interaction in solid state. DSC thermogram suggested that LX endothermic peak was slightly decreased due to the dilution effect. LXDT formulations exhibited acceptable friability (0.2 to 0.9%). The dissolution efficiency of LXDT formulations ranged from 72.21 to 93.63%. The overall study showed that the optimum level of independent factors was found to be 3:1 MCC/Mannitol, 11 min mixing time, and 6.23% disintegrant concentration. Accelerated stability studies showed the compendial acceptable hardness, friability, and disintegration times. The application of QbD approach can help in the detailed understanding of the effect of CMAs and CPPs on the CQAs on LXDT final product.

The Optimization and Evaluation of Flibanserin Fast-Dissolving Oral Films.

Flibanserin (FLB) is a drug used for female hypotensive sexual desire disorder approved by the FDA in August 2015. FLB exhibits extensive hepatic first-pass metabolism and low aqueous solubility, hence poor oral bioavailability. In this study, beta hydroxypropyl cyclodextrin-FLB inclusion complexes were incorporated into orally fast dissolving films. This dosage form was expected to improve FLB aqueous solubility, which would give fast onset of action and decrease presystemic metabolism, hence improving oral bioavailability. The inclusion complex at a ratio of 1:1 was prepared by the kneading method. Differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), and powder X-ray diffractometry (XRD) were used to confirm complex formation. The Box-Behnken design (15 different formulae of FLB fast-dissolving oral films (FLBFDOFs) were utilized for the optimization of the prepared films. The Expert Design 11 program was utilized to examine the effects of three selected factors, polymer concentration (X1), plasticizer concentration (X2), and disintegrant concentration (X3) on four responses: disintegration time (DT), initial dissolution rate (IDR), dissolution efficiency (DE), and film quality (QF). Numerical optimization was performed by minimizing disintegration time (Y1), while maximizing the initial drug dissolution rate (Y2), dissolution efficiency (Y3), and the quality factor (Y4). The statistical analysis showed that X1 has a significant positive effect on the disintegration time and a significant negative effect on IDR. While X2 and X3 produced a nonsignificant negative effect on IDR. Dissolution efficiency was maximized at the middle concentration of both X2 and X3. The best film quality was observed at the middle concentration of both X1 and X2. In addition, increasing X3 leads to an improvement in film quality. The optimized film cast from an aqueous solution contains hydroxypropyl cellulose (2%) as a hydrophilic film-forming agent and propylene glycol (0.8%) as a plasticizer and cross povidone (0.2%) as a disintegrant. The prepared film released 98% of FLB after 10 min and showed good physical and mechanical properties. The optimized formula showed a disintegration time of 30 s, IDR of 16.6% per minute, DE15 of 77.7%, and QF of 90%. This dosage form is expected to partially avoid the pre-systemic metabolism with a fast onset of action, hence improving its bioavailability that favors an advantage over conventional dosage forms.

Enhancement of the dissolution and in-vitro activity of a new antineoplastic agent.

The cell-surface molecule CD44 plays a major role in the regulation of cancer stem cells. The CD44 inhibitor compound N'-(1-dimethylaminomethyl-2-oxoindolin-3-ylidene)-2-(benzyloxy)benzohydrazide (OYB), anticancer agent is practically insoluble in water. Hence, the solid dispersion (SD) technique was used for enhancing the dissolution of OYB. The SD of OYB was achieved using OYB:poloxamer 188 (1:7) via the fusion method. The anticancer activities of the free-OYB solution and the SD formulation (OYB-SD) were investigated in-vitro. The dissolution rate of OYB-SD (1:7) increased by 2-fold compared with the untreated drug (51.52-100% at pH 1.2 and 8.25-19.15% at pH 7 buffer). In addition, OYB-SD afforded 3-folds cytotoxic effect, against LoVo cells, compared to the untreated compound (IC50 4.72 ± 0.57 and 13.97 ± 0.90 µg/ml, respectively) and against HepG2 (∼3-fold) (4.98 ± 0.368 and 13.85 ± 1.82 µg/ml, respectively) and MCF-7 (1.4-fold) cells (15.20 ± 0.20 and 21.12 ± 0.51 µg/ml, respectively), and enhanced the apoptotic potential in LoVo cells compared with free-OYB. The improved cytotoxic activity of the drug might be attributable to the enhanced dissolution of OYB.

Preparation, characterization, dissolution, and permeation of flibanserin - 2-HP-ß-cyclodextrin inclusion complexes.

Flibanserin (FLB), an antiserotonin drug, is used to treat women with hypoactive sexual appetite disorder. FLB shows low bioavailability (~33%) probably due to its low water solubility. The current study investigated the impact of hydroxypropyl-ß-cyclodextrin (HP-ß-CD) and sodium lauryl sulfate (SLS) on the dissolution and permeation of FLB. HP-ß-CD-FLB inclusion complexes were prepared using physical mixing and kneading at 1:1 and 1:2 M ratios and characterized using differential scanning calorimetry, Fourier transform infrared spectroscopy, and powder X-ray diffractometry. The dissolution and permeation of the complexes through a cellophane membrane were performed in, 0.1, 0.3 and 0.5% SLS in phosphate buffer (pH 6.8). Derived from the slope of the linear phase solubility diagram, the apparent stability constant (K 1:1) was 372.54 M-1. Kneading changed the crystalline form of FLB to an amorphous appearance characterized by minimal crystalline peaks, indicating successful inclusion complex formation. In addition, the HP-ß-CD-FLB inclusion complexes showed twofold increased dissolution efficiency at 6 h. The cumulative FLB amount permeated at 6 h increased from 14.1% to 21.88% and 34.56% in the presence of 0.1% and 0.3% of SLS, respectively. However, increasing SLS to 0.5% did not show an increase in FLB permeation. Therefore, the HP-ß-CD-FLB inclusion complex has an improved dissolution rate compared to FLB alone. The presence of SLS in the dissolution medium increases the dissolution rate of pure FLB and its complex with HP-ß-CD. kneaded 1:1 complex was formulated bioadhesive buccal tablets and showed enhanced drug release.

Docking studies and molecular dynamics simulations of the binding characteristics of waldiomycin and its methyl ester analog to Staphylococcus aureus histidine kinase.

Bacterial histidine kinases (HKs) are considered attractive drug targets because of their ability to govern adaptive responses coupled with their ubiquity. There are several classes of HK inhibitors; however, they suffer from drug resistance, poor bioavailability, and a lack of selectivity. The 3D structure of Staphylococcus aureus HK was not isolated in high-resolution coordinates, precluding further disclosure of structure-dependent binding to the specific antibiotics. To elucidate structure-dependent binding, the 3D structure of the catalytic domain WalK of S. aureus HK was constructed using homology modeling to investigate the WalK-ligand binding mechanisms through molecular docking studies and molecular dynamics simulations. The binding free energies of the waldiomycin and its methyl ester analog were calculated using molecular mechanics/generalized born surface area scoring. The key residues for protein-ligand binding were postulated. The structural divergence responsible for the 7.4-fold higher potency of waldiomycin than that of its ester analog was clearly observed. The optimized 3D macromolecule-ligand binding modes shed light on the S. aureus HK/WalK-ligand interactions that afford a means to assess binding affinity to design new HK/WalK inhibitors.

Design of taste masked enteric orodispersible tablets of diclofenac sodium by applying fluid bed coating technology.

Diclofenac sodium (DS) a non-steroidal anti-inflammatory drug has a bitter taste and is a local stomach irritant. The aim of this study was to formulate taste masked DS orally dispersible tablets (ODTs) with targeted drug release in the intestine. Pellets of DS were designed using sugar sphere cores layered with DS followed by an enteric coat of Eudragit L100 and a second coat of Eudragit E100 for taste masking. The produced pellets had a high loading efficiency of 99.52% with diameters ranging from 493.7 to 638.9 µm. The prepared pellets were spherical with smooth surfaces on scanning electron microscopy examination. Pellets with the 12% enteric coat Eudragit L100 followed by 5% Eudragit E 100 resulted in 1.4 ±â€¯0.5% DS release in simulated gastric fluid (SGF) and complete dissolution in simulated intestinal fluid (SIF). The pellets were then used to formulate ODTs. In vitro disintegration time of ODTs ranged from 20 ±â€¯0.26 to 46 ±â€¯0.27 s in simulated saliva fluid (SSF). Dissolution was less than 10% in SGF while complete drug release occurred in SIF. The release rate was higher for the optimized formulation (F12) in SIF than for the marketed product Voltaren® 25 mg tablets. The optimized ODTs formulation had a palatable highly acceptable taste.

A simple HPLC-UV method for the quantification of theophylline in rabbit plasma and its pharmacokinetic application.

A simple, precise and accurate high-performance liquid chromatography-ultraviolet method was developed and validated for the quantification of theophylline in rabbit plasma using hydroxyethyl theophylline as an internal standard. Separation was performed on Waters(®) C18 column (µBondapak™ 5 µm, 150 × 3.9 mm) using a mobile phase consisting of water-acetonitrile (96:4 v/v) at a flow rate of 1 mL/min. Validation of the method was performed in order to demonstrate its selectivity, linearity, precision, accuracy and stability. The calibration curves of theophylline were linear over a concentration range of 0.1-25 µg/mL. The within- and between-day coefficient of variation (CV) were <10%. The extraction recoveries of theophylline at the three levels of quality control samples were 63.1, 69.4 and 69.7%. The method was rapid with retention time of theophylline and the internal standard observed at ∼5.2 and 6.5 min, respectively. The developed method was applied successfully for studying the pharmacokinetics of theophylline in rabbits.

Effects of fenugreek, garden cress, and black seed on theophylline pharmacokinetics in beagle dogs.

CONTEXT: Herb-drug interactions are a serious problem especially for drugs with a narrow therapeutic index, taking into consideration that herbal medicines are commonly used in various parts of the world. OBJECTIVE: The present study investigates the effect of fenugreek, garden cress, and black seed on the pharmacokinetics of theophylline in beagle dogs. MATERIALS AND METHODS: Beagle dogs received theophylline (200 mg) orally and blood samples were withdrawn at different time intervals (0.33, 0.66, 1.0, 1.5, 2, 3, 4, 6, 8, 12, 24, and 30 h). After a suitable washout period, each herb was given orally at doses of 25, 7.5, and 2.5 g, twice daily for 7 d. On the eighth day, theophylline was re-administrated orally and blood samples were collected. Plasma concentrations of theophylline were determined using HPLC and pharmacokinetic parameters were calculated using a non-compartmental analysis. RESULTS: Treatment with fenugreek (25 g, orally) lead to a decrease in Cmax and AUC0-t of theophylline of about 28% (p < 0.05) and 22% (p < 0.05), respectively, with no significant changes in T1/2λ compared with the baseline values. Garden cress caused a decrease in Cmax to a lesser extent and delayed Tmax of theophylline (2.10 ± 0.24 h versus 3.40 ± 0.74 h), while AUC0-∞ increased by 37.44%. No significant effect was observed for the black seed treatment on theophylline disposition as measured by Cmax, Tmax, AUC0-∞, and CL/F. DISCUSSION AND CONCLUSION: The concurrent use of fenugreek or garden cress alters theophylline pharmacokinetic behavior in an animal model. This could represent a modulation in cytochrome P450 activity, which is responsible for theophylline metabolism in beagle dogs. Further confirmation of these results in humans will warrant changes in theophylline dosing before the co-administration of such herbs.

Influence of Carbopol 71G-NF on the release of dextromethorphan hydrobromide from extended-release matrix tablets.

The objective of this study was to evaluate the potential of Carbopol(®) 71G-NF on the release of dextromethorphan hydrobromide (DM) from matrix tablets in comparison with hydroxypropyl methylcellulose (HPMC(®) K15M) and Eudragit(®) L100-55 polymers. Controlled release DM matrix tablets were prepared using Carbopol 71G-NF, HPMC K15M, and Eudragit L100-55 at different drug to polymer ratios by direct compression technique. The mechanical properties of the tablets as tested by crushing strength and friability tests were improved as the concentration of Carbopol, HPMC, and Eudragit increased. However, Carbopol-based tablets showed a significantly (P<0.05) higher crushing strength and a lower friability than HPMC and Eudragit tablets. No significant differences in weight uniformity and thickness values were observed between the different formulations. It was also found that Carbopol significantly (P<0.05) delayed the release of DM in comparison with HPMC K15M and Eudragit L100-55. A combination of HPMC K15M and Eudragit L100-55 in a 1:1 ratio at 20 and 30% significantly (P<0.05) delayed the release of DM than Eudragit L100-55 alone. Moreover, blends of Carbopol and HPMC at a 1:1 ratio at the 10, 20, and 30% total polymer concentration were investigated. The blend of Carbopol and HPMC at 10% level significantly (P<0.05) slowed the release of DM than Carbopol or HPMC alone, whereas blends at 20 and 30% level significantly (P<0.05) delayed the release of DM compared with HPMC or Carbopol alone. The results with these polymer blends showed that it was possible to reduce the total amount of polymers when used as a combination in formulation.

The use of spray-drying to enhance celecoxib solubility.

The present research investigates the enhancement of the dissolution rate of celecoxib by using spray-drying to prepare a solid dispersion with various polymers, namely Kollicoat IR® (Kollicoat), polyvinyl alcohol (PVA) 22000, or polyethylene glycol 6000 (PEG). The investigated drug-to-polymer mass ratios were 1:1, 1:2, and 1:4 by weight. Hydroalcoholic or methylene chloride solvent systems were used. The obtained yields ranged from 65% to 78%, whereas the entrapment efficiencies were between 68% and 82%. The results revealed an increase in the dissolution rate of the prepared particles up to 200% within 20 min. The prepared particles were investigated using differential scanning calorimetry, scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy. The increased dissolution rate was attributed to hydrogen bond formation between celecoxib and each polymer together with the reduced size of the formed particles offering a greater overall surface area. It was concluded that spray-drying may be considered a successful one-step technique to improve the dissolution rate of celecoxib when using Kollicoat, PVA, or PEG as the carrier polymer.

Assessment of the pharmaceutical quality of marketed enteric coated pantoprazole sodium sesquihydrate products.

Pantoprazole sodium sesquihydrate (PSS) is a proton pump inhibitor, used in acid-related disorders, like peptic ulcer and gastroesophageal reflux. Increasing the number of pantoprazole containing products in the market, raises questions of its efficacy and generic substitution. The pharmaceutical quality of 6 generic PSS enteric coated tablets in 2 local markets was assessed relative to the innovator product (pantozol®). Uniformity of dosage unit, disintegration and in vitro drug release were determined using United States pharmacopeia for delayed release tablets. The similarity factor (f2) was assessed using the FDA recommended approach (f2 similarity factor). The content uniformity of the innovator product was 98.39% of the labeled claim with RSD value of 1.08%, while the content of generic products ranged from 96.98% to 98.80% with RSD values of 1.24-2.19%. All the products showed no disintegration, cracks or swelling in 0.1 N HCl, except product 1, which showed complete disintegration after 20 min. However, the disintegration of all the products in phosphate buffer met USP requirements. Dissolution of tablets in 0.1 N HCl showed no drug release after 2 h except product 1 in which one tablet showed a drug release more than 10% at acid stage level A1. In addition, three tablets of this product showed dissolution of 45%, 48% and 69% at acid stage level A2. The similarity factor f2 of the products was between 71 and 74 indicating the similarity in dissolution profiles of all the products in accordance to FDA requirements, except product 1 in which f2 value was 18.67.

Effects of Kollicoat IR and hydroxypropyl-beta-cyclodextrin on the dissolution rate of omeprazole from its microparticles and enteric-coated capsules.

Omeprazole microparticles were prepared by different drying techniques using Kollicoat IR nd hydroxypropyl-beta-cyclodextrin hydrophilic polymers. Physico-chemical properties were investigated using differential scanning calorimetry and powder X-ray diffractometry. Dissolution rate was determined and compared to the physical mixtures and the morphology was studied using a scanning electron microscope. Omeprazole transformed from the crystalline state to the amorphous state as confirmed by the disappearance of its melting peak and the characteristic of the crystalline peaks. Omeprazole dissolution rate was enhanced significantly from its spray- and freeze-dried microparticles as compared to the corresponding physical mixtures and drug alone (P < 0.05). F3 and F5 formula possessed superior release rate over other formulations. In acidic medium, the release of drug from enteric-coated capsules was not detectable, while it is completely released within 40 min after changing dissolution medium to phosphate buffer (pH 7.4). The transformation of OME from crystalline to amorphous state by using either Kollicoat IR or hydroxylpropyl-beta-cyclodextrin is considered a promising way to improvement of drug dissolution.

Mucoadhesive polymeric hydrogels for nasal delivery of acyclovir.

The study evaluated different mucoadhesive polymeric hydrogels for nasal delivery of acyclovir. Gels containing poly-N-vinyl-2-pyrrolidone (PVP) were prepared with crosslinking achieved by irradiation with a radiation dose of 15 kGy being as efficient as 20 kGy. Gels containing chitosan and carbopol were also evaluated. The mucoadhesive properties of gels were measured by a modification of a classical tensile experiment, employing a tensile tester and using freshly excised sheep nasal mucosa. Considering the mucoadhesive force, chitosan gel and gel prepared with 3% PVP in presence of polyethylene glycol (PEG) 600 were the most efficient. The in vitro drug release depended on the gel composition. Higher release rates were obtained from PVP gels compared to chitosan or carbopol gels. The release rate of drug from PVP gels was increased further in presence of PEG or glycerol. Histopathological investigations proved that the PVP was a safe hydrogel to be used for mucosal delivery. The PEG in gel formulations caused less damages to the nasal mucosal compared to formulation containing glycerol.

Preparation and comparative evaluation of sustained release metoclopramide hydrochloride matrix tablets.

Metoclopramide hydrochloride (MCP) is commonly used for the management of gastrointestinal disorders. Frequent administration and the undesired side effects (extra pyramidal symptoms) of the drug on the central nervous system due to the fluctuations of its plasma concentrations may lead to patient incompliance, and hence, improper therapy. Therefore, the present work will be devoted to formulate the drug in sustained release formulations. MCP was incorporated in 12 formulae containing different polymers and/or different polymer ratios. These polymers were hydroxypropylmethyl cellulose (HPMC), carboxymethylcellulose (CMC) and ethyl cellulose (EC). Sodium starch glycolate (SSG) was added to some formulae in different amounts in order to soften and/or disintegrate the tablets. Both direct compression and granulation techniques were used to prepare the tablets. The physical properties were found to be satisfactory for all the formulae. The dissolution profiles of the tablets were constructed using the change-over method. The drug release involved a combination of both diffusion and polymer-chain relaxation mechanisms. The time required to release 50% of MCP ranged from 1.2 to more than 8 h. Direct compression and dry granulation techniques produced sufficient sustaining of the drug release. However, the pellets made by wet granulation released MCP in about 2 h, i.e., pelletization spheronization technique was not effective in sustaining the drug.

Formulation and evaluation of dried yeast tablets using different techniques.

The aim of this study was to prepare and evaluate dried yeast tablets using both direct compression and dry granulation techniques in comparison with the conventional wet granulation as well as commercial product. Wet granulation technique is not favorable for producing the yeast tablets due to the problems of color darkening and the reduction of the fermentation power of the yeast as a result of the early start of the fermentation process due to the presence of moisture. Twenty six formulae of dried yeast tablets were prepared and evaluated. Certain directly compressible vehicles were employed for preparing these tablets. The quality control tests (weight uniformity, friability, disintegration time and hardness) of the prepared dried yeast tablets were performed according to B.P. 1998 limits. All batches of the prepared tablets complied with the B.P. limits of weight uniformity. Moreover, small values of friability % (1% or less) were obtained for all batches of dried yeast tablets with acceptable hardness values, indicating good mechanical properties which can withstand handling. On the other hand, not all batches complied with the limit of disintegration test which may be attributed to various formulation component variables. Therefore, four disintegrating agents were investigated for their disintegrating effect. It was found that the method of preparation, whether it is direct compression, dry granulation or wet granulation, has an effect on disintegration time of these dried yeast tablets and short disintegration times were obtained for some of the formulae. The shortest disintegration time was obtained with those tablets prepared by direct compression among the other techniques. Therefore, the direct compression is considered the best technique for preparation of dried yeast tablets and the best formula (which showed shorter disintegration time and better organoleptic properties than the available commercial yeast tablets) was chosen. Drug content for dried yeast granular powder, and the chosen best prepared formula, was determined by gas chromatography (GC). It was found that this formula gave the same alcohol content produced by an equal amount of the dried yeast granular powder. This result in conjunction with weight uniformity indicated drug content uniformity of the prepared dried yeast tablets.