Western diet increases brain metabolism and adaptive immune responses in a mouse model of amyloidosis.

Diet-induced increase in body weight is a growing health concern worldwide. Often accompanied by a low-grade metabolic inflammation that changes systemic functions, diet-induced alterations may contribute to neurodegenerative disorder progression as well. This study aims to non-invasively investigate diet-induced metabolic and inflammatory effects in the brain of an APPPS1 mouse model of Alzheimer's disease. [18F]FDG, [18F]FTHA, and [18F]GE-180 were used for in vivo PET imaging in wild-type and APPPS1 mice. Ex vivo flow cytometry and histology in brains complemented the in vivo findings. 1H- magnetic resonance spectroscopy in the liver, plasma metabolomics and flow cytometry of the white adipose tissue were used to confirm metaflammatory condition in the periphery. We found disrupted glucose and fatty acid metabolism after Western diet consumption, with only small regional changes in glial-dependent neuroinflammation in the brains of APPPS1 mice. Further ex vivo investigations revealed cytotoxic T cell involvement in the brains of Western diet-fed mice and a disrupted plasma metabolome. 1H-magentic resonance spectroscopy and immunological results revealed diet-dependent inflammatory-like misbalance in livers and fatty tissue. Our multimodal imaging study highlights the role of the brain-liver-fat axis and the adaptive immune system in the disruption of brain homeostasis in amyloid models of Alzheimer's disease.

Unlocking the Fluorine-Free Buoy Effect: Surface-Enriched Ruthenium Polypyridine Complexes in Ionic Liquids.

Controlling the local concentration of metal complexes at the surface of ionic liquids (ILs) is a highly sought-after objective due to its pivotal implications in supported ionic liquid phase (SILP) catalysis. Equally important is to avoid per- and polyfluorinated substances due to environmental concerns. Herein, we investigate the surface enrichment of Ru polypyridyl complexes with fluorine-free alkylic side groups of varying lengths and shapes, using the hydrophilic IL [C2C1Im][OAc] as solvent. Additional charged carboxylate groups are included into the polypyridyl ligands to increase the solubility of the complex in the IL. When the ligand system is functionalized with long and hydrophobic alkyl side chains, the complex predominantly localizes at the IL/vacuum interface, as deduced from angle-resolved X-ray photoelectron spectroscopy. Conversely, in the presence of short or more bulky substituents, no surface enrichment is observed. This buoy-like behaviour with fluorine-free side groups is explored for 0.05 %mol to 1 %mol solutions. Intriguingly, surface saturation occurs at approximately 0.5 %mol, which is beneficial to the efficient operation of catalytic systems featuring high surface areas, such as SILP catalysts.

Surface Chemistry of a [C2C1Im][OTf] (Sub)Wetting Layer on Pt(111): A Combined XPS, IRAS, and STM Study.

The concept of a solid catalyst with an ionic liquid layer (SCILL) is a promising approach to improve the selectivity of noble metal catalysts in heterogeneous reactions. In order to understand the origins of this selectivity control, we investigated the growth and thermal stability of ultrathin 1-ethyl-3-methylimidazolium trifluormethanesulfonate [C2C1Im][OTf] films on Pt(111) by infrared reflection absorption spectroscopy (IRAS) and X-ray photoelectron spectroscopy (XPS) in time-resolved and temperature-programmed experiments. We combined these spectroscopy experiments with scanning tunneling microscopy (STM) to obtain detailed insights into the orientation and adsorption geometry of the ions in the first IL layer. Furthermore, we propose a mechanism for the thermal evolution of [C2C1Im][OTf] on Pt(111). We observe an intact IL layer on the surface at temperatures below 200 K. Adsorbed [C2C1Im][OTf] forms islands, which are evenly distributed over the surface. The [OTf]- anion adsorbs via the SO3 group, with the molecular axis perpendicular to the surface. Anions and cations are arranged next to each other, alternating on the Pt(111) surface. Upon heating to 250 K, we observe changes in geometry and structural distribution. Whereas at low temperature, the ions are arranged alternately for electrostatic reasons, this driving force is no longer decisive at 250 K. Here, a phase separation of two different species is discernible in STM. We propose that this effect is due to a surface reaction, which changes the charge of the adsorbates. We assume that the IL starts to decompose at around 250 K, and thus, pristine IL and decomposition products coexist on the surface. Also, IRAS and XPS show indication of IL decomposition. Further heating leads to increased IL decomposition. The reaction products associated with the anions are volatile and leave the surface. In contrast, the cation fragments remain on the surface up to temperatures above 420 K.

Exploring the interfacial behavior of ruthenium complexes in ionic liquids: implications for supported ionic liquid phase catalysts.

The interaction of metal complexes with ionic liquids, with a particular focus on the stability and surface concentration of the metal centers, is crucial in applications involving catalysts based on supported ionic liquids. In this study, we synthesized the complexes [Ru(tpy)(bpy)Cl][PF6] and [Ru(tpy)(dcb)Cl][PF6] (tpy = 2,2',2''-terpyridine, bpy = 2,2'-bipyridine, dcb = 4,4'-dicarboxy-2,2'-bipyridine) and we prepared solutions using the ionic liquids (ILs) 1-ethyl-3-methylimidazolium acetate [C2C1Im][OAc] and 1-butyl-3-methylimidazolium hexafluorophosphate [C4C1Im][PF6]. The chemical environment of the Ru(II) metal center and the interfacial behavior of the complexes in the different IL solutions were determined using angle-resolved X-ray photoelectron spectroscopy (ARXPS). In [C4C1Im][PF6], [Ru(tpy)(bpy)Cl][PF6] maintains its chemical structure, while in [C2C1Im][OAc], partial changes in the chemical environment of the Ru center are indicated by XPS, likely due to ligand exchange. The presence of carboxylic acid functional groups in the bipyridyl ligand seems to inhibit this ligand exchange. The investigated complexes do not exhibit surface activity but are depleted from the IL/gas interface. These findings hold significance for the design of new supported ionic liquid phase catalysts based on Ru complexes.

Inherent Fluorescence Demonstrates Immunotropic Properties for Novel Janus Kinase 3 Inhibitors.

There is a general question in small molecule pharmacology about how apparent compound concentrations in blood, plasma, and organs actually relate to actual amounts at the target site of a compound. In this study, we used inherently fluorescent JAK3 ligands and their macrolide conjugates to investigate the relationship between physical properties, apparent bulk concentration, and organ and subcellular distribution. In vitro uptake into immune cells suggested that much of the substance was associated with granules or organelles. Samples from murine pharmacokinetic studies were analyzed by both conventional mass spectrometry and cryofluorescence microscopy methods to show the distribution of a compound within organs and cells without artifacts of fixation. These observations confirm the uptake of granules observed in vitro. Data from macrolides carrying either a coumarin fluorophore or a JAK3 inhibitor were similar, suggesting that the distribution is directed by the properties of the larger macrolide. These data show a propensity for azalide macrolides to concentrate in the lung and gut epithelia and suggest that the plasma- or whole-blood-derived estimates of drug levels almost certainly underestimate concentrations of macrolides in the mucous membranes. Thus, their apparent efficacy at sub-bacteriostatic doses may reflect their higher levels in barrier layers.

Adsorption and thermal evolution of [C1C1Im][Tf2N] on Pt(111).

In the context of ionic liquid (IL)-assisted catalysis, we have investigated the adsorption and thermal evolution of the IL 1,3-dimethylimidazolium bis(trifluoromethylsulfonyl)imide ([C1C1Im][Tf2N]) on Pt(111) between 100 and 800 K by angle-resolved X-ray photoelectron spectroscopy and scanning tunneling microscopy. Defined amounts of IL in the coverage range of a complete first wetting layer were deposited at low temperature (100-200 K), and subsequently heated to 300 K, or directly at 300 K. At 100 K, the IL adsorbs as an intact disordered layer. Upon heating to 200 K, the IL stays intact, but forms an ordered and well-oriented structure. Upon heating to 250 K, the surface order increases, but at the same time STM and XPS indicate the onset of decomposition. Upon heating to 300 K, decomposition progresses, such that 50-60% of the IL is decomposed. The anion-related reaction products desorb instantaneously, and the cation-related products remain on the surface. Thereby, the surface is partly passivated, enabling the remaining IL to still be adsorbed intact at 300 K. For IL deposition directly at 300 K, a fraction of the IL instantaneously decomposes, with the anion-related products desorbing, opening free space for further deposition of IL. Hence, cation-related species accumulate at the expense of anions, until one fully closed wetting layer is formed. As a consequence, a higher dose is required to reach this coverage at 300 K, compared to 100-200 K.

Understanding the Buoy Effect of Surface-Enriched Pt Complexes in Ionic Liquids: A Combined ARXPS and Pendant Drop Study.

Recently, we demonstrated that Pt catalyst complexes dissolved in the ionic liquid (IL) [C4 C1 Im][PF6 ] can be deliberately enriched at the IL surface by introducing perfluorinated substituents, which act like buoys dragging the metal complex towards the surface. Herein, we extend our previous angle-resolved X-ray photoelectron spectroscopy (ARXPS) studies at complex concentrations between 30 and 5 %mol down to 1 %mol and present complementary surface tension pendant drop (PD) measurements under ultraclean vacuum conditions. This combination allows for connecting the microscopic information on the IL/gas interface derived from ARXPS with the macroscopic property surface tension. The surface enrichment of the Pt complexes is found to be most pronounced at 1 %mol . It also displays a strong temperature dependence, which was not observed for 5 %mol and above, where the surface is already saturated with the complex. The surface enrichment deduced from ARXPS is also reflected by the pronounced decrease in surface tension with increasing concentration of the catalyst. We furthermore observe by ARXPS and PD a much stronger surface affinity of the buoy-complex as compared to the free ligands in solution. Our results are highly interesting for an optimum design of IL-based catalyst systems with large contact areas to the surrounding reactant/product phase, such as in supported IL phase (SILP) catalysis.

Selective Inhibitors of Janus Kinase 3 Modify Responses to Lipopolysaccharides by Increasing the Interleukin-10-to-Tumor Necrosis Factor α Ratio.

Janus kinase (JAK) inhibitors act at low doses (e.g., tofacitinib, 0.2-0.4 µmol/kg bid) in clinical use, suggesting an efficient underlying mode of action. We hypothesized that their effectiveness is due to their ability to raise the ratio of IL-10 to TNFα. Unlike other JAK isoforms, JAK3 is expressed mainly in hematopoietic cells and is essential for immune function. We used JAK3 selective inhibitors with preferential distribution to immune cells. Inhibition of JAK3 in human leukocytes reduced TNFα and IL-6 but maintained levels of IL-10, while pan-JAK inhibitors increased TNFα, IL-6, and IL-10. JAK1 is required for IL-10 receptor signaling, which suggests that, at exposure above the IC50 (55 nM for tofacitinib on JAK1), there is less feedback control of TNFα levels. This leads to self-limiting effects of JAK1 inhibitors and could place an upper limit on appropriate doses. In vivo, treating mice with JAK3 inhibitors before LPS administration decreased plasma TNFα and increased IL-10 above vehicle levels, suggesting that JAK3 inhibition may limit TNFα release by increasing IL-10 while leaving the IL-10 receptor functional. This mechanism should have general utility in controlling autoimmune diseases and can be conveniently observed by measuring the ratio of IL-10 to TNFα. In summary, our targeted, "leukotropic" inhibitors more effectively increased IL-10/TNFα ratios than unselective control compounds and could, therefore, be ideal for autoimmune therapy.

Formation and Surface Behavior of Pt and Pd Complexes with Ligand Systems Derived from Nitrile-functionalized Ionic Liquids Studied by XPS.

The front cover artwork is provided by the groups of Prof. Hans-Peter Steinrück and Prof. Peter Wasserscheid at the Friedrich-Alexander-Universität (FAU) Erlangen-Nürnberg. The image shows substitution of volatile acetonitrile ligands by a nitrile-functionalized imidazolium cation. The formed cationic complex and the counter ions exhibit a specific preferential orientation at the ionic liquid/gas interface, which can be studied by angle-resolved XPS. Read the full text of the Research Article at 10.1002/cphc.202200391.

The Buoy Effect: Surface Enrichment of a Pt Complex in IL Solution by Ligand Design.

Invited for the cover of this issue are the groups of Hans-Peter Steinrück and Peter Wasserscheid at the Friedrich-Alexander-Universität Erlangen-Nürnberg. The image depicts two Pt catalysts dissolved in an ionic liquid. For one of them, fluorinated side chains in the ligand system act as buoys leading to pronounced enrichment of the complex at the gas/IL interface, as is evidenced by strongly enhanced Pt signals in angle-resolved photoelectron spectroscopy. For the complex without fluorinated side chains, no such effect is observed. Read the full text of the article at 10.1002/chem.202203325.

The Buoy Effect: Surface Enrichment of a Pt Complex in IL Solution by Ligand Design.

The targeted enrichment of a Pt complex with an ionic liquid (IL)-derived ligand system in IL solution is demonstrated by using angle-resolved X-ray photoelectron spectroscopy. When the ligand system is complemented with fluorinated side chains, the complex accumulates strongly at the IL/gas interface, while in an equivalent solution of a complex without these substituents no such effect could be observed. This buoy-like behavior induces strong population of the complex at the outermost molecular layer close to surface saturation, which was studied over a range from 5 to 30 %mol . The surface enrichment was found to be most efficient at the lowest concentration, which is particularly favorable for catalytic applications such as supported ionic-liquid-phase (SILP) catalysis.

Formation and Surface Behavior of Pt and Pd Complexes with Ligand Systems Derived from Nitrile-functionalized Ionic Liquids Studied by XPS.

We studied the formation and surface behavior of Pt(II) and Pd(II) complexes with ligand systems derived from two nitrile-functionalized ionic liquids (ILs) in solution using angle-resolved X-ray photoelectron spectroscopy (ARXPS). These ligand systems enabled a high solubility of the metal complexes in IL solution. The complexes were prepared by simple ligand substitution under vacuum conditions in defined excess of the coordinating ILs, [C3 CNC1 Im][Tf2 N] and [C1 CNC1 Pip][Tf2 N], to immediately yield solutions of the final products. The ILs differ in the cationic head group and the chain length of the functionalized substituent. Our XPS measurements on the neat ILs gave insights in the electronic properties of the coordinating substituents revealing differences in donation capability and stability of the complexes. Investigations on the composition of the outermost surface layers using ARXPS revealed no surface affinity of the nitrile-functionalized chains in the neat ILs. Solutions of the formed complexes in the nitrile ILs showed homogeneous distribution of the solute at the surface with the heterocyclic moieties preferentially orientated towards the vacuum, while the metal centers are rather located further away from the IL/vacuum interface.

Direct Correlation of Surface Tension and Surface Composition of Ionic Liquid Mixtures-A Combined Vacuum Pendant Drop and Angle-Resolved X-ray Photoelectron Spectroscopy Study.

We investigated the surface tension and surface composition of various mixtures of the two ionic liquids (ILs) 1-methyl-3-octyl-imidazolium hexafluorophosphate [C8C1Im][PF6] and 1,3-bis(polyethylene glycol)imidazolium iodide [(mPEG2)2Im]I in the temperature range from 230 to 370 K under ultraclean vacuum conditions. The surface tension was measured using a newly developed apparatus, and the surface composition was determined by angle-resolved X-ray photoelectron spectroscopy (ARXPS). In the pure ILs, the alkyl chains of [C8C1Im][PF6] and the PEG chains of [(mPEG2)2Im]I are enriched at the IL/vacuum interface. In the mixtures, a strong selective surface enrichment of the alkyl chains occurs, which is most pronounced at low [C8C1Im][PF6] contents. For the surface tension, strong deviations from an ideal mixing behaviour take place. By applying a simple approach based on the surface composition of the mixtures as deduced from ARXPS, we are able to predict and reproduce the experimentally measured temperature-dependent surface tension values with astonishingly high accuracy.

Probing Surface and Interfacial Tension of Ionic Liquids in Vacuum with the Pendant Drop and Sessile Drop Method.

We report on the surface and interface tension measurements of the two ionic liquids (ILs) [C8C1Im][PF6] and [m(PEGn)2Im]I (n = 2, 4, 6) in a surface science approach. The measurements were performed in a newly developed and unique experimental setup, which allows for surface tension (ST) measurements using the pendant drop method and for contact angle measurements using the sessile drop method under the well-defined conditions of a high vacuum (from 10-7 mbar). The setup also allows for in vacuum transfer to an ultrahigh vacuum system for surface preparation and analysis, such as in angle-resolved X-ray photoelectron spectroscopy. For [C8C1Im][PF6], we observe a linear decrease in the surface tension with increasing temperature. The ST measured under high vacuum is consistently found to be larger than under ambient conditions, which is attributed to the influence of water uptake in air by the IL. For [m(PEGn)2Im]I (n = 2, 4, 6), we observe a decrease in the ST with increasing polyethylene glycol chain length in a vacuum, similar to very recent observations under 1 bar Argon. This decrease is attributed to an increasing enrichment of the PEG chains at the surface. The ST data obtained under these ultraclean conditions are essential for a fundamental understanding of the relevant parameters determining ST on the microscopic level and can serve as a benchmark for theoretical calculations, such as molecular dynamic simulations. In addition to the ST measurements, proof-of-principle data are presented for sessile drop measurements in HV, and a detailed description and characterization of the new setup is provided.

On-Surface Metathesis of an Ionic Liquid on Ag(111).

We investigated the adsorption, surface enrichment, ion exchange, and on-surface metathesis of ultrathin mixed IL films on Ag(111). We stepwise deposited 0.5 ML of the protic IL diethylmethylammonium trifluoromethanesulfonate ([dema][TfO]) and 1.0 ML of the aprotic IL 1-methyl-3-octylimidazolium hexafluorophosphate ([C8 C1 Im][PF6 ]) at around 90 K. Thereafter, the resulting layered frozen film was heated to 550 K, and the thermally induced phenomena were monitored in situ by angle-resolved X-ray photoelectron spectroscopy. Between 135 and 200 K, [TfO]- anions at the Ag(111) surface are exchanged by [PF6 ]- anions and enriched together with [C8 C1 Im]+ cations at the IL/vacuum interface. Upon further heating, [dema][PF6 ] and [OMIm][PF6 ] desorb selectively at ∼235 and ∼380 K, respectively. Hereby, a wetting layer of pure [C8 C1 Im][TfO] is formed by on-surface metathesis at the IL/metal interface, which completely desorbs at ∼480 K. For comparison, ion enrichment at the vacuum/IL interface was also studied in macroscopic IL mixtures, where no influence of the solid support is expected.

Design and Synthesis of Highly Selective Brain Penetrant p38α Mitogen-Activated Protein Kinase Inhibitors.

Stress-induced p38α mitogen-activated protein (MAP) kinase activation modulates cytokine overproduction and is associated with neuroinflammation and neurodegeneration. As a potential therapeutic approach, novel Skepinone-based p38α MAP kinase inhibitors were optimized to cross the blood-brain barrier via either amino acid transporters or hydrophobic diffusion. To enhance absorption from the oral route, we used methyl ester prodrugs of the active carboxy analogs. Of these, 3-(8-((2,4-difluorophenyl)amino)-5-oxo-10,11-dihydro-5H-dibenzo[a,d][7]annulene-3-carboxamido)propanoic acid (43; p38α, IC50 = 5.5 nM) and 4-(8-((2,4-difluorophenyl)amino)-5-oxo-10,11-dihydro-5H-dibenzo[a,d][7]annulene-3-carboxamido)butanoic acid (44; p38α, IC50 = 12 nM) had brain-to-plasma ratios of 1.4 and 4.4, respectively. Compound 70, 3-(8-((2-aminophenyl)amino)-5-oxo-10,11-dihydro-5H-dibenzo[a,d][7]annulene-3-carboxamido)propanoic acid (p38α, IC50 = 1.0 nM), the Skepinone-N counterpart of 43, was most present in the mouse brain (brain-to-plasma ratio of 4.7; 0.4 mg/kg p.o., 2 h, 580 nmol/kg). Compounds 43, 44, and 70 were p38α-MAP-kinase-selective, metabolically stable, hERG nonbinding, and able to modulate IL-6 and TNF-α production in cell-based assays.

Impact of Face Masks on Exercise Capacity and Lactate Thresholds in Healthy Young Adults.

BACKGROUND: Although many countries have introduced strict guidelines regarding mouth and nose coverage in public to contain infection rates during the SARS-CoV-2 pandemic, more information is needed regarding the impact of wearing face masks on lactate thresholds (LT) and performance parameters during exercise. METHODS: Ten healthy male and 10 healthy female subjects (age = 33.4 [10.26] y, body mass index = 23.52 [2.36] kg/m2) performed 3 incremental performance tests, wearing no mask (NM), surgical mask (SM), and filtering face piece mask class 2 (FFP2), with a cycle ergometer. The authors analyzed changes in the LT, in blood gas parameters, and in the rating of perceived exertion (RPE). RESULTS: Performance at LT remained unchanged in subjects wearing SM or FFP2 in comparison with NM (162.5 [50.6] vs 167.2 [58.9] vs 162.2 [58.4] W with NM, SM, and FFP2, respectively, P = .24). However, the peak performance was significantly reduced wearing FFP2 compared with NM (213.8 [71.3] vs 230.5 [77.27] W, FFP2 vs NM, respectively, P < .001). Capillary pCO2 was increased while wearing SM as well as FFP2 compared with NM (29 [3.1] vs 33.3 [4] vs 35.8 [4.9] mmHg with NM, SM, and FFP2, respectively; P < .001), and pO2 decreased under maximum performance (84 [6.7] vs 79.1 [7.5] vs 77.3 [8.2] mmHg with NM, SM, and FFP2, P < .01). Importantly, rating of perceived exertion was significantly increased by wearing FFP2 compared with NM at LT according to Mader (16.7 [2.7] vs 15.3 [1.8] FFP2 vs NM, respectively, P < .01). CONCLUSION: Wearing face masks during exercise showed no effect on LT, limited maximum performance, and induced discrete changes in capillary pCO2 and pO2 within the physiologic range while increasing RPE at LT.

Time- and Temperature-Dependent Growth Behavior of Ionic Liquids on Au(111) Studied by Atomic Force Microscopy in Ultrahigh Vacuum.

We deposited defined amounts of [C1C1Im][Tf2N] on Au(111) at different temperatures and investigated the morphology and wetting behavior of the deposited films by atomic force microscopy. For multilayer coverages, we observe a drastically different growth behavior when comparing deposition at room temperature (RT) and deposition below 170 K followed by slow annealing to RT. Upon deposition at RT, we find the formation of 2-30 nm high and 50-500 nm wide metastable 3D droplets on top of a checkerboard-type wetting layer. These droplets spread out into stable 2D bilayers, on the time scale of hours and days. The same 2D bilayer structure is obtained after deposition below 170 K and slow annealing to RT. We present a statistical analysis on the time-dependent changes of the shape and volume of the 3D droplets and the 2D bilayers. We attribute the stabilization of the 2D bilayers on the wetting layer and on already formed bilayers to the high degree of order in these layers. Notably, the transformation process from the 3D droplets to 2D bilayer islands is accelerated by tip effects and also X-ray radiation.

Adsorption, Wetting, Growth, and Thermal Stability of the Protic Ionic Liquid Diethylmethylammonium Trifluoromethanesulfonate on Ag(111) and Au(111).

We have studied the adsorption, wetting, growth, and thermal evolution of the protic IL diethylmethylammonium trifluoromethanesulfonate ([dema][TfO]) on Au(111) and Ag(111). Ultrathin films were deposited at room temperature (RT) and at 90 K, and were characterized in situ by angle-resolved X-ray photoelectron spectroscopy. For both surfaces, we observe that independent of temperature, initially, a closed 2D wetting layer forms. While the film thickness does not increase past this wetting layer at RT, at 200 K and below, "moderate" 3D island growth occurs on top of the wetting layer. Upon heating, on Au(111), the [dema][TfO] multilayers desorb at 292 K, leaving an intact [dema][TfO] wetting layer, which desorbs intact at 348 K. The behavior on Ag(111) is much more complex. Upon heating [dema][TfO] deposited at 90 K, the [dema]+ cations deprotonate in two steps at 185 and 305 K, yielding H[TfO] and volatile [dema]0. At 355 K, the formed H[TfO] wetting layer partly desorbs (∼50%) and partly decomposes to form an F-containing surface species, which is stable up to 570 K.

n-Butane, iso-Butane and 1-Butene Adsorption on Imidazolium-Based Ionic Liquids Studied with Molecular Beam Techniques.

The interaction of molecules, especially hydrocarbons, at the gas/ionic liquid (IL) surface plays a crucial role in supported IL catalysis. The dynamics of this process is investigated by measuring the trapping probabilities of n-butane, iso-butane and 1-butene on a set of frozen 1-alkyl-3-methylimidazolium-based ILs [Cn C1 Im]X, where n=4, 8 and X- =Cl- , Br- , [PF6 ]- and [Tf2 N]- . The decrease of the initial trapping probability with increasing surface temperature is used to determine the desorption energy of the hydrocarbons at the IL surfaces. It increases with increasing alkyl chain length n and decreasing anion size for the ILs studied. We attribute these effects to different degrees of alkyl chain surface enrichment, while interactions between the adsorbate and the anion do not play a significant role. The adsorption energy also depends on the adsorbing molecule: It decreases in the order n-butane>1-butene>iso-butane, which can be explained by different dispersion interactions.