RESUMEN
Background: The sub-Saharan Africa has the fastest rate of urbanisation in the world. However, infrastructure growth in the region is slower than urbanisation rates, leading to inadequate provision and access to basic services such as piped safe drinking water. Lack of sufficient access to safe water has the potential to increase the burden of waterborne diseases among these urbanising populations. This scoping review assesses how the relationship between waterborne diseases and water sufficiency in Africa has been studied. Methods: In April 2020, we searched the Web of Science, PubMed, Embase and Google Scholar databases for studies of African cities that examined the effect of insufficient piped water supply on selected waterborne disease and syndromes (cholera, typhoid, diarrhea, amoebiasis, dysentery, gastroneteritis, cryptosporidium, cyclosporiasis, giardiasis, rotavirus). Only studies conducted in cities that had more than half a million residents in 2014 were included. Results: A total of 32 studies in 24 cities from 17 countries were included in the study. Most studies used case-control, cross-sectional individual or ecological level study designs. Proportion of the study population with access to piped water was the common water availability metrics measured while amounts consumed per capita or water interruptions were seldom used in assessing sufficient water supply. Diarrhea, cholera and typhoid were the major diseases or syndromes used to understand the association between health and water sufficiency in urban areas. There was weak correlation between the study designs used and the association with health outcomes and water sufficiency metrics. Very few studies looked at change in health outcomes and water sufficiency over time. Conclusion: Surveillance of health outcomes and the trends in piped water quantity and mode of access should be prioritised in urban areas in Africa in order to implement interventions towards reducing the burden associated with waterborne diseases and syndromes.
RESUMEN
It can be a diagnostic challenge to identify patients with coronavirus disease 2019 in whom antibiotics can be safely withheld. This study evaluated the effectiveness of a guideline implemented at Sheffield Teaching Hospitals NHS Foundation Trust that recommends withholding antibiotics in patients with low serum procalcitonin (PCT), defined as ≤0.25 ng/mL. Results showed reduced antibiotic consumption in patients with PCT ≤0.25 ng/mL with no increase in mortality, alongside a reduction in subsequent carbapenem prescriptions during admission. The results support the effectiveness of this guideline, and further research is recommended to identify the optimal cut-off value for PCT in this setting.
Asunto(s)
Antibacterianos/normas , Antibacterianos/uso terapéutico , Antivirales/normas , Antivirales/uso terapéutico , Infecciones Bacterianas/tratamiento farmacológico , Tratamiento Farmacológico de COVID-19 , Polipéptido alfa Relacionado con Calcitonina/sangre , Adolescente , Adulto , Anciano , Anciano de 80 o más Años , Programas de Optimización del Uso de los Antimicrobianos/métodos , Infecciones Bacterianas/sangre , Biomarcadores/sangre , Estudios de Cohortes , Coinfección/sangre , Coinfección/tratamiento farmacológico , Femenino , Humanos , Masculino , Persona de Mediana Edad , Guías de Práctica Clínica como Asunto , Estudios Retrospectivos , Adulto JovenRESUMEN
BACKGROUND: Commercial geospatial data resources are frequently used to understand healthcare utilisation. Although there is widespread evidence of a digital divide for other digital resources and infra-structure, it is unclear how commercial geospatial data resources are distributed relative to health need. METHODS: To examine the distribution of commercial geospatial data resources relative to health needs, we assembled coverage and quality metrics for commercial geocoding, neighbourhood characterisation, and travel time calculation resources for 183 countries. We developed a country-level, composite index of commercial geospatial data quality/availability and examined its distribution relative to age-standardised all-cause and cause specific (for three main causes of death) mortality using two inequality metrics, the slope index of inequality and relative concentration index. In two sub-national case studies, we also examined geocoding success rates versus area deprivation by district in Eastern Region, Ghana and Lagos State, Nigeria. RESULTS: Internationally, commercial geospatial data resources were inversely related to all-cause mortality. This relationship was more pronounced when examining mortality due to communicable diseases. Commercial geospatial data resources for calculating patient travel times were more equitably distributed relative to health need than resources for characterising neighbourhoods or geocoding patient addresses. Countries such as South Africa have comparatively high commercial geospatial data availability despite high mortality, whilst countries such as South Korea have comparatively low data availability and low mortality. Sub-nationally, evidence was mixed as to whether geocoding success was lowest in more deprived districts. CONCLUSIONS: To our knowledge, this is the first global analysis of commercial geospatial data resources in relation to health outcomes. In countries such as South Africa where there is high mortality but also comparatively rich commercial geospatial data, these data resources are a potential resource for examining healthcare utilisation that requires further evaluation. In countries such as Sierra Leone where there is high mortality but minimal commercial geospatial data, alternative approaches such as open data use are needed in quantifying patient travel times, geocoding patient addresses, and characterising patients' neighbourhoods.
Asunto(s)
Mapeo Geográfico , Recursos en Salud , Disparidades en el Estado de Salud , Internacionalidad , Factores Socioeconómicos , Sesgo , Estudios Transversales , Ghana/epidemiología , Recursos en Salud/economía , Humanos , Nigeria/epidemiologíaRESUMEN
Surface-swimming nano- and micromotors hold significant potential for on-chip mixing, flow generation, sample manipulation, and microrobotics. Here we describe rotating microrods magnetized nearly orthogonally to their long axes. When actuated near a solid surface, these microrods demonstrate precessing motion, with rods describing a double cone similar to the motion of a kayaker's paddle. The precessing motion induces translation. At 1 kHz, these "microkayaks" move at translational velocities of ≈14 µm s-1 and generate advective flows up to 10 µm s-1.
RESUMEN
BACKGROUND/OBJECTIVES: Obesity contributes to telomere attrition. Studies focusing on short-term effects of weight loss have been unable to identify protection of telomere length. This study investigates long-term effects of pronounced weight loss induced by bariatric surgery on telomere length. SUBJECTS/METHODS: One hundred forty-two patients were recruited in a prospective, controlled intervention study, follow-up investigations were done after 10.46±1.48 years. A control group of normal weight participants was recruited and followed from 1995 to 2005 in the Bruneck Study. A total of 110 participants from each study was matched by age and sex to compare changes in telomere length. Quantitative PCR was used to determine telomere length. RESULTS: Telomere length increased significantly by 0.024±0.14 (P=0.047) in 142 bariatric patients within 10 years after surgery. The increase was different from telomere attrition in an age- and sex-matched cohort population of the Bruneck Study (-0.057±0.18; ß=0.08; P=0.003). Significant changes in telomere length disappeared after adjusting for baseline body mass index (BMI) because of general differences in BMI and telomere length between the two study populations (ß=0.07; P=0.06). Age was proportional to telomere length in matched bariatric patients (r=0.188; P=0.049) but inversely correlated with telomere length in participants of the Bruneck Study (r=-0.197; P=0.039). There was no association between percent BMI/excess weight loss and telomere attrition in bariatric patients. Baseline telomere length in bariatric patients was inversely associated with baseline plasma cholesterol and triglyceride concentrations. Telomere shortening was associated with lower high-density lipoprotein cholesterol and higher fasting glucose concentration at baseline in bariatric patients. CONCLUSIONS: Increases in relative telomere length were found after bariatric surgery in the long term, presumably due to amelioration of metabolic traits. This may overrule the influence of age and baseline telomere length and facilitate telomere protection in patients experiencing pronounced weight loss.
Asunto(s)
Cirugía Bariátrica , Lipoproteínas HDL/metabolismo , Obesidad Mórbida/cirugía , Acortamiento del Telómero/fisiología , Telómero/fisiología , Pérdida de Peso/fisiología , Adulto , Anciano , Austria , Índice de Masa Corporal , Comorbilidad , Femenino , Humanos , Masculino , Persona de Mediana Edad , Estudios Prospectivos , Reacción en Cadena en Tiempo Real de la Polimerasa , Factores de TiempoRESUMEN
The ability to use magnets external to the body to focus therapy to deep tissue targets has remained an elusive goal in magnetic drug targeting. Researchers have hitherto been able to manipulate magnetic nanotherapeutics in vivo with nearby magnets but have remained unable to focus these therapies to targets deep within the body using magnets external to the body. One of the factors that has made focusing of therapy to central targets between magnets challenging is Samuel Earnshaw's theorem as applied to Maxwell's equations. These mathematical formulations imply that external static magnets cannot create a stable potential energy well between them. We posited that fast magnetic pulses could act on ferromagnetic rods before they could realign with the magnetic field. Mathematically, this is equivalent to reversing the sign of the potential energy term in Earnshaw's theorem, thus enabling a quasi-static stable trap between magnets. With in vitro experiments, we demonstrated that quick, shaped magnetic pulses can be successfully used to create inward pointing magnetic forces that, on average, enable external magnets to concentrate ferromagnetic rods to a central location.
Asunto(s)
Imanes , Modelos Teóricos , NanotubosRESUMEN
Magnetic drug targeting has been proposed as a means of efficiently targeting drugs to tumors. However, the extracellular matrix (ECM) remains a significant barrier to long-range magnetophoretic transport through the tumor volume. While ensemble measurements of nanoparticle magnetophoresis have been reported, a single particle level understanding of magnetophoretic transport remains at large. We quantify nanorod magnetophoresis through ECM based on single particle observations. We find that smaller diameter particles achieve larger velocities through ECM despite experiencing smaller magnetic forces. Additionally, two interesting dynamics are elucidated. First, 18 nm diameter nanorods experience bimodal stick-slip motion through ECM during static field magnetophoresis, while similar bimodal transport is not observed for 55 nm nor 200 nm diameter nanorods. Second, smaller particles experience larger deviations in their orientation angle with respect to the magnetic field. This work elucidates important dynamics of nanoparticle transport through complex, porous biomaterials that may go unnoticed during ensemble measurements.
Asunto(s)
Matriz Extracelular/metabolismo , Nanotubos/química , Transporte Biológico , Portadores de Fármacos/química , Galvanoplastia , Matriz Extracelular/química , Magnetismo , Nanopartículas de Magnetita/química , Níquel/química , Tamaño de la Partícula , Polietilenglicoles/química , ViscosidadRESUMEN
The new School of Dentistry at the University of Central Lancashire (UCLan) opened on 3 September 2007 and was the first dental school to be built in Britain for many years. This September the School will be complete with all four years of students and the first students will be applying for their vocational trainee positions this autumn. This article reflects on its successful programme and describes how UCLan's School of Dentistry differs from traditional dental schools.
Asunto(s)
Odontólogos , Facultades de Odontología , Estudiantes de Odontología , Curriculum , Atención Odontológica , Odontólogos/provisión & distribución , Inglaterra , Humanos , Internado no Médico , Atención Primaria de Salud , Enseñanza/métodos , Comunicación por VideoconferenciaRESUMEN
OBJECTIVE: To investigate the ability to match composite restorations to teeth using digital imaging and CIE L*a*b* color differences. METHODS: Ten extracted human central incisors were used. Eleven discs of composite of differing shades were produced and mounted on white cardboard to create a customized shade guide (CSG). The CSG was photographed next to each of the ten teeth in a phantom head using a digital SLR camera. The images were analyzed, and color differences (deltaE) between the teeth and the shade discs were calculated using CIE L*a*b* values. Three cavities were then drilled into the labial surface of each tooth. Composite shades with the lowest three deltaE values were then used to restore the cavities. Ten observers evaluated the teeth under a standard D65 light source and recorded the best match. RESULTS: The majority of the observers selected the lowest deltaE in six out of the 10 teeth, and in a further two out of 10 teeth the second lowest deltaE was chosen. CONCLUSION: The lowest deltaE selected by objective color matching was agreed as the best match by observers. The high correlation between digital and visual color matching confirms the ability of digital camera and image analysis software to detect color differences.
Asunto(s)
Color , Resinas Compuestas , Restauración Dental Permanente , Procesamiento de Imagen Asistido por Computador , Fotografía Dental , Colorimetría , Estética Dental , Humanos , Incisivo , Fotografía Dental/instrumentación , Reproducibilidad de los Resultados , Percepción VisualRESUMEN
This study focused on the hypothesis that KCNA genes (which encode K(V)alpha1 voltage-gated K(+) channels) have enhanced functional expression in smooth muscle cells of a primary determinant of peripheral resistance - the small mesenteric artery. Real-time PCR methodology was developed to measure cell type-specific in situ gene expression. Profiles were determined for arterial myocyte expression of RNA species encoding K(V)alpha1 subunits as well as K(V)beta1, K(V)alpha2.1, K(V)gamma9.3, BK(Ca)alpha1 and BK(Ca)beta1. The seven major KCNA genes were expressed and more readily detected in endothelium-denuded mesenteric resistance artery compared with thoracic aorta; quantification revealed dramatic differential expression of one to two orders of magnitude. There was also four times more RNA encoding K(V)alpha2.1 but less or similar amounts encoding K(V)beta1, K(V)gamma9.3, BK(Ca)alpha1 and BK(Cabeta)1. Patch-clamp recordings from freshly isolated smooth muscle cells revealed dominant K(V)alpha1 K(+) current and current density twice as large in mesenteric cells. Therefore, we suggest the increased RNA production of the resistance artery impacts on physiological function, although there is quantitatively less K(+) current than might be expected. The mechanism conferring up-regulated expression of KCNA genes may be common to all the gene family and play a functional role in the physiological control of blood pressure.
Asunto(s)
Arterias Mesentéricas/fisiología , Familia de Multigenes , Músculo Liso Vascular/fisiología , Canales de Potasio/genética , Canales de Potasio/metabolismo , Resistencia Vascular , Animales , Aorta Torácica/metabolismo , Conductividad Eléctrica , Expresión Génica , Masculino , Arterias Mesentéricas/metabolismo , Ratones , Ratones Endogámicos C57BL , Músculo Liso Vascular/metabolismo , Miocitos del Músculo Liso/metabolismo , Técnicas de Placa-Clamp , Isoformas de Proteínas/genética , Isoformas de Proteínas/metabolismo , ARN/metabolismo , Regulación hacia ArribaRESUMEN
Progressive three body wear up to 30 min for five dental composites (Concise, Heliomolar, Occlusin, P-30, Profile, TPH) stored for 9 months at 37 degrees C in citrate, lactate and PBS buffers, 25 and 75% ethanol media, has been measured using a wear tester. Particle size of the filler and the storage media are found to play dominant roles in determining the extent of wear. Heliomolar, which is a microfilled composite, shows maximum wear whereas wear is least in composites containing filler particles of conventional and hybrid size such as P-30 (> 1 micron). The storage media is found to attack and degrade glass filler particles compared to composites having quartz fillers.
Asunto(s)
Resinas Compuestas/química , Análisis del Estrés Dental , Resinas Acrílicas/química , Bisfenol A Glicidil Metacrilato/química , Tampones (Química) , Ácido Cítrico/química , Análisis de Falla de Equipo , Etanol/química , Alimentos , Concentración de Iones de Hidrógeno , Lactatos/química , Masticación , Modelos Biológicos , Tamaño de la Partícula , Fosfatos/química , Poliuretanos/química , Solubilidad , Estrés Mecánico , Factores de Tiempo , Uretano/químicaRESUMEN
UNLABELLED: Ecstasy users have reported that dry mouth, jaw tension and tooth grinding were common side effects of its use although the influence of these effects upon toothwear have not been previously investigated. OBJECTIVE: This study aimed to compare incisal and occlusal toothwear in Ecstasy users and a group of non-users of Ecstasy but users of other drugs. METHODS: Groups were established by a snowball peer information network from visitors to the "drop-in" Maryland Centre in Liverpool. Volunteers completed a questionnaire about social life, drug use and diet. Clinical examination for wear on the incisal edges and on canine tips was conducted with a mirror and probe, whereas occlusal wear was recorded in impressions and subsequently scored from stone replica casts. The degree of toothwear was scored according to the criteria of the Tooth Wear Index (Smith & Knight, Br Dent J 1984;157:16). RESULTS: Ecstasy users (n = 30) were compared with non-users (n = 28). Toothwear through the enamel into the underlying dentine occurred in 18 (60%) Ecstasy users but in only three (11%) non-users. The overall mean toothwear score in Ecstasy users was 0.63 compared with 0.16 in non-users (t = 4.34, P < 0.001). Dry mouth was reported by 93% of Ecstasy users whilst 89% stated that they clenched or ground their teeth after taking the drug. Tooth grinding commonly continued into the following morning. Carbonated (acidic) beverages were consumed by 93% of the users with a mean of three cans per "trip". CONCLUSION: The severity of toothwear and the number of teeth affected were greater in Ecstasy users than in a group of non-users. The occlusal surfaces were more commonly affected than the incisal, which may indicate jaw clenching rather than grinding as a feature of Ecstasy-induced muscle hyperactivity.
Asunto(s)
Alucinógenos/efectos adversos , N-Metil-3,4-metilenodioxianfetamina/efectos adversos , Trastornos Relacionados con Sustancias/complicaciones , Abrasión de los Dientes/inducido químicamente , Erosión de los Dientes/inducido químicamente , Inglaterra/epidemiología , Humanos , Incidencia , Encuestas y Cuestionarios , Abrasión de los Dientes/diagnóstico , Abrasión de los Dientes/epidemiología , Erosión de los Dientes/diagnóstico , Erosión de los Dientes/epidemiología , Xerostomía/inducido químicamente , Xerostomía/diagnóstico , Xerostomía/epidemiologíaRESUMEN
The objective of the study was to compare the amounts of fluoride released by two glass-ionomer cements, a resin-modified glass-ionomer cement, a compomer and a fluoride-containing composite into deionized water and artificial saliva. Disc samples of each of the materials were fabricated and placed in either water or artificial saliva. Fluoride analysis of the media was performed periodically over 64 days. The data were analysed to show the rate of fluoride release per cm2 per hour for each material. The results showed that the fluoride release rate for all the materials in both solutions decreased dramatically after 24 h. The release rate in artificial saliva was significantly less than in water (P < 0.001). The resin-modified glass-ionomer cement consistently displayed the highest fluoride release rate per hour into both media.
Asunto(s)
Cariostáticos/química , Compómeros , Materiales Dentales/química , Fluoruros/química , Resinas Acrílicas/química , Silicatos de Aluminio/química , Análisis de Varianza , Cariostáticos/análisis , Resinas Compuestas/química , Estética Dental , Fluoruros/análisis , Cementos de Ionómero Vítreo/química , Maleatos/química , Ensayo de Materiales , Metacrilatos/química , Poliuretanos/química , Cementos de Resina/química , Saliva Artificial/química , Silicatos/química , Factores de Tiempo , Agua/químicaRESUMEN
The objective of the study was to compare the potential for fluoride recharge of two glass-ionomer cements, a resin-modified glass-ionomer cement, a compomer and a fluoride-containing composite in artificial saliva. Disc samples of each of the materials were placed into artificial saliva. The fluoride content of the artificial saliva was determined at various intervals up to 57 days. The discs were subjected to a 2 min exposure of NaF (500 parts/106). This recharge procedure was repeated at 64 and 120 days. The fluoride release was measured before and after recharge. The fluoride release for all of the materials increased after each exposure to NaF; however, the amount for the composite was very low. The resin-modified glass-ionomer cement displayed the greatest potential for fluoride recharge at 57 and 64 days (P<0.05). By 120 days, the amount of fluoride released in the 24 h post-recharge interval had decreased in all the materials. All the materials showed a potential for fluoride recharge. This effect, however, was minimal in the fluoride-containing composite.
Asunto(s)
Cariostáticos/química , Compómeros , Materiales Dentales/química , Fluoruros/química , Resinas Acrílicas/química , Silicatos de Aluminio/química , Análisis de Varianza , Resinas Compuestas/química , Cementos de Ionómero Vítreo/química , Humanos , Maleatos/química , Ensayo de Materiales , Metacrilatos/química , Poliuretanos/química , Cementos de Resina/química , Saliva Artificial/química , Silicatos/química , Fluoruro de Sodio/química , Factores de TiempoRESUMEN
OBJECTIVES: The purpose of this investigation was to observe the behaviour of a recently discovered silver sorption layer in seven dental composites for three years. METHODS: Rectangular block testpieces (3.0 x 2.5 x 2.5 mm) of seven resin composites were fabricated and the resin rich layer removed from one surface by grinding on silica carbide paper. The testpieces were immersed in aqueous AgNO3 (3 mol/l). After 26, 42, 90, 180, 360, 540, 720 and 1085 days, respectively, nine specimens of each material were removed to measure the depth of silver stain in the different composites. RESULTS: The depth of silver stain continued to increase at a rate proportional to (time)0.5. After three years, five homogeneous subsets [HS] were distinguished for the resin rich surface [HS1] Occlusin (stain depth = 45.6 microns); [HS2] Clearfil (117.8 microns), [HS3] Heliomolar (145.6 microns), Concise (148.8 microns), P-30 (168.9 microns); [HS4] Silux (243.3 microns); [HS5] Profile-TLC (446.7 microns). For the ground surface, the materials were in similar subsets but the depth of stain was less. Different coloured layers were seen within the sorption layer in some materials. SIGNIFICANCE: The linear relationship between the depth of stain and (time)0.5 indicate that the mechanism controlling the sorption is Case 1 (Fickian) diffusion. The different depths in the individual materials may indicate differences in the segmental mobility of the polymer chains and free space within the resin phase of the composites. If the silver sorption layer marks the extent of water penetration, then the results show different depth distributions for individual composites.
Asunto(s)
Resinas Compuestas/química , Plata , Absorción , Análisis de Varianza , Difusión , Permeabilidad , Análisis de Regresión , Plata/análisis , Nitrato de Plata/química , Estadísticas no Paramétricas , Factores de TiempoRESUMEN
Tooth wear is an increasing problem in dentistry. Traditionally, it has been divided into three categories: abrasion, attrition, and erosion. However, most clinical cases of tooth wear involve more than one of these processes. It is often easier to make a diagnosis by looking for the signs of the fundamental wear processes rather than trying to categorize the individual case. Wear can be caused by direct surface-to-surface wear, an intervening slurry, or a corrosive environment. Wear occurs during mastication, but also at other times, often at night. Although it may be possible to institute a preventive regimen, this will not always help the patient if his or her prime concern is esthetics. The same processes that cause tooth wear will cause wear to restorative materials. To diagnose and prevent wear, its processes must be understood.
Asunto(s)
Abrasión de los Dientes , Atrición Dental , Erosión de los Dientes , Adulto , Anciano , Bruxismo/complicaciones , Bebidas Gaseosas/efectos adversos , Alisadura de la Restauración Dental , Dieta/efectos adversos , Femenino , Humanos , Masculino , Masticación , Persona de Mediana Edad , Tamaño de la Partícula , Abrasión de los Dientes/etiología , Atrición Dental/fisiopatología , Erosión de los Dientes/etiologíaRESUMEN
OBJECTIVE: The long-term clinical performance of three posterior resin composites and two amalgams was assessed. METHOD AND MATERIALS: Thirty Class II restorations each of P-30, Occlusin, Clearfil Posterior (composites), New True Dentalloy, and Solila Nova (amalgams) were placed. Reviews took place at 6 months and at 1, 2, 3, 4, 5, and 10 years. At each visit the gingival condition, the contact point status, and the presence of ledges, gaps, or recurrent caries were assessed. The color match, cavosurface marginal stain, general surface stain, tarnish, and corrosion were also scored where applicable. Epoxy resin replicas were used to measure the maximum depth of wear. RESULTS: After 10 years, there had been corrosion of both the high- and low-copper amalgams and a slight deterioration in color match of a number of composite restorations. Eighteen (of 20) Occlusin restorations had obvious cavosurface marginal stain, attributed to staining of the unfilled bonding resin layer. Statistical analysis indicated that New True Dentalloy, Solila Nova, and Clearfil-P exhibited significantly less wear than Occlusin and P-30. None of the restorations examined at the 10-year recall required replacement. CONCLUSION: The five materials, placed in a dental school environment, provided adequate clinical service for 10 years.
Asunto(s)
Resinas Compuestas , Amalgama Dental , Restauración Dental Permanente/métodos , Análisis de Varianza , Diente Premolar , Color , Resinas Compuestas/química , Corrosión , Aleaciones Dentales , Amalgama Dental/química , Adaptación Marginal Dental , Fracaso de la Restauración Dental , Alisadura de la Restauración Dental , Humanos , Estudios Longitudinales , Diente Molar , Evaluación de Resultado en la Atención de Salud , Cementos de Resina , UretanoAsunto(s)
Hiperplasia Gingival/fisiopatología , Fallo Renal Crónico/fisiopatología , Trasplante de Riñón , Ciclosporina/sangre , Ciclosporina/uso terapéutico , Encía/patología , Hiperplasia Gingival/epidemiología , Hiperplasia Gingival/patología , Gingivitis/patología , Gingivitis/fisiopatología , Humanos , Inmunosupresores/sangre , Inmunosupresores/uso terapéutico , Fallo Renal Crónico/patología , Fallo Renal Crónico/cirugía , Estudios Longitudinales , Nifedipino/uso terapéutico , Factores de Riesgo , Listas de EsperaRESUMEN
AIMS: This study was established to determine if users of ecstasy had greater tooth wear than a comparison group of non-users. DESIGN: The study involved a direct comparison between two groups of young people gathered by a peer information network and divided by the response to the question "Do you take ecstasy?" SETTING: The information network was established at the Maryland Centre in Liverpool (UK). Besides offering advice on drug and sex-related problems this centre distributes free condoms and is therefore visited by many young people who would not consider themselves to have these problems. PARTICIPANTS: There were 30 users and 28 non-users with no significant difference in the gender ratio. Age was not recorded to maintain absolute confidentiality, but all the participants appeared to be of student age. MEASUREMENTS: Tooth wear was measured using the index of Smith & Knight. The social and drug-taking profile of the two groups was ascertained by questionnaire. FINDINGS: It was found that the mean (+/- STD) tooth wear score for the back teeth was 0.96 +/- 0.16 in the users compared with 0.12 +/- 0.08 for the comparison group. These values were significantly different (p < 0.001). The values for the front teeth were not significantly different. Many users were aware of clenching their teeth 12 or even 24 hours after taking the drug. CONCLUSION: Taking ecstasy results in an increased likelihood of tooth wear on the back teeth. This is likely to result from clenching the teeth in the acidic environment caused by carbonated (fizzy) drinks.