Hyaluronic acid conjugates of glycine peptides and L-tryptophan.

This work reports about the conjugation of glycine C-terminal ethyl and methyl ester peptides and L-tryptophan methyl ester with sodium hyaluronate in aqueous solutions using the peptide coupling agent DMTMM (or short DMT, 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methyl-morpholinium chloride). Detailed infrared (IR) absorbance and 1H and 13C (2D) NMR studies (heteronuclear multi-bond correlation spectroscopy, HMBC) confirmed covalent and regioselective amide bonds with the D-glucuronate, but also proves the presence of DMT traces in all conjugates. The ethyl ester`s methyl protons on the peptides` C-terminal could be used to quantify the degree of substitution of the peptide on the hyaluronate scaffold by NMR. The ester group also proved stable during conjugation and work-up, and could in some cases be selectively cleaved in water whilst leaving the amide bond intact as shown by potentiometric charge titration, NMR and IR. The conjugates did not influence the capability of human umbilical vein endothelial cells (HUVECs) to reduce MTS (5-[3-(carboxymethoxy)phenyl]-3-(4,5-dimethyl-2-thiazolyl)-2-(4-sulfophenyl)-2H-tetrazolium inner salt) to a formazan dye, which points towards a low cytotoxicity for the obtained products. The conjugation method and products could be tested for tissue engineering gels or drug delivery purposes with alternative, biologically active peptides.

Cytotoxicity and Antibacterial Efficacy of Betaine- and Choline-Substituted Polymers.

Cationic charge has been widely used to increase polymer adsorption and flocculation of dispersions or to provide antimicrobial activity. In this work, cationization of hydroxyethyl cellulose (HEC) and polyvinyl alcohol (PVA) was achieved by covalently coupling betaine hydrochloride and choline chloride to the polymer backbones through carbonyl diimidazole (CDI) activation. Two approaches for activation were investigated. CDI in excess was used to activate the polymers' hydroxyls followed by carbonate formation with choline chloride, or CDI was used to activate betaine hydrochloride, followed by ester formation with the polymers' hydroxyls. The first approach led to a more significant cross-linking of PVA, but not of HEC, and the second approach successfully formed ester bonds. Cationic, nitrogen-bearing materials with varying degrees of substitution were obtained in moderate to high yields. These materials were analyzed by Fourier transform infrared spectroscopy, nuclear magnetic resonance, polyelectrolyte titration, and kaolin flocculation. Their dose-dependent effect on the growth of Staphylococcus aureus and Pseudomonas aeruginosa, and L929 mouse fibroblasts, was investigated. Significant differences were found between the choline- and betaine-containing polymers, and especially, the choline carbonate esters of HEC strongly inhibited the growth of S. aureus in vitro but were also cytotoxic to fibroblasts. Fibroblast cytotoxicity was also observed for betaine esters of PVA but not for those of HEC. The materials could potentially be used as antimicrobial agents for instance by coating surfaces, but more investigations into the interaction between cells and polysaccharides are necessary to clarify why and how bacterial and human cells are inhibited or killed by these derivatives, especially those containing choline.

Nitroreductase-sensitive fluorescent covalent organic framework for tumor hypoxia imaging in cells.

Covalent organic frameworks (COFs) have been used in cell imaging, but very rarely for imaging specific cell conditions. Herein, a ß-ketoenamine-based fluorescent COF was post-synthetically modified to incorporate a hypoxia-targeting molecule. Fluorescence microscopy imaging shows that the material discriminates between HeLa cells grown under hypoxia and those cultured under normoxia.

Efficiency of Neat and Quaternized-Cellulose Nanofibril Fillers in Chitosan Membranes for Direct Ethanol Fuel Cells.

In this work, fully polysaccharide based membranes were presented as self-standing, solid polyelectrolytes for application in anion exchange membrane fuel cells (AEMFCs). For this purpose, cellulose nanofibrils (CNFs) were modified successfully with an organosilane reagent, resulting in quaternized CNFs (CNF (D)), as shown by Fourier Transform Infrared Spectroscopy (FTIR), Carbon-13 (C13) nuclear magnetic resonance (13C NMR), Thermogravimetric Analysis (TGA)/Differential Scanning Calorimetry (DSC), and ζ-potential measurements. Both the neat (CNF) and CNF(D) particles were incorporated in situ into the chitosan (CS) membrane during the solvent casting process, resulting in composite membranes that were studied extensively for morphology, potassium hydroxide (KOH) uptake and swelling ratio, ethanol (EtOH) permeability, mechanical properties, ionic conductivity, and cell performance. The results showed higher Young's modulus (119%), tensile strength (91%), ion exchange capacity (177%), and ionic conductivity (33%) of the CS-based membranes compared to the commercial Fumatech membrane. The addition of CNF filler improved the thermal stability of the CS membranes and reduced the overall mass loss. The CNF (D) filler provided the lowest (4.23 × 10-5 cm2 s-1) EtOH permeability of the respective membrane, which is in the same range as that of the commercial membrane (3.47 × 10-5 cm2s-1). The most significant improvement (~78%) in power density at 80 °C was observed for the CS membrane with neat CNF compared to the commercial Fumatech membrane (62.4 mW cm-2 vs. 35.1 mW cm-2). Fuel cell tests showed that all CS-based anion exchange membranes (AEMs) exhibited higher maximum power densities than the commercial AEMs at 25 °C and 60 °C with humidified or non-humidified oxygen, demonstrating their potential for low-temperature direct ethanol fuel cell (DEFC) applications.

Children gut microbiota exhibits a different composition and metabolic profile after in vitro exposure to Clostridioides difficile and increases its sporulation.

Clostridioides difficile (Clostridium difficile) infection (CDI) is one of the main public health concerns in adults, while children under 2 years of age are often colonized asymptomatically. In both adults and children, CDI is strongly associated with disturbances in gut microbiota. In this study, an in-vitro model of children gut microbiota was challenged with vegetative cells or a conditioned media of six different toxigenic C. difficile strains belonging to the ribotypes 027, 078, and 176. In the presence of C. difficile or conditioned medium the children gut microbiota diversity decreased and all main phyla (Bacteroidetes, Firmicutes, and Proteobacteria) were affected. The NMR metabolic spectra divided C. difficile exposed children gut microbiota into three clusters. The grouping correlated with nine metabolites (short chain fatty acids, ethanol, phenolic acids and tyramine). All strains were able to grow in the presence of children gut microbiota and showed a high sporulation rate of up to 57%. This high sporulation rate in combination with high asymptomatic carriage in children could contribute to the understanding of the reported role of children in C. difficile transmissions.

Glasdegib Dimaleate: Synthesis, Characterization and Comparison of Its Properties with Monomaleate Analogue.

Glasdegib is a recently approved drug for the treatment of acute myeloid leukemia. It is formulated and marketed in monomaleate salt form. In our investigation, we were able to prepare a glasdegib dimaleate form, which could, in theory, exist in double-salt form or as a mixture of salt and co-crystal species. Therefore, the obtained crystals of glasdegib dimaleate were characterized via 15N ssNMR and single-crystal X-ray diffraction, which revealed that the obtained glasdegib dimaleate exists in double-salt form. This is a surprising finding based on the pKa values for glasdegib and maleic acid. Furthermore, we fully characterized the new dimaleate form using thermal analyses (DSC and TGA) and spectroscopy (IR and Raman). Finally, the physicochemical properties, such as solubility and chemical stability, of both forms were determined and compared.

Organic acid cross-linked 3D printed cellulose nanocomposite bioscaffolds with controlled porosity, mechanical strength, and biocompatibility.

Herein, we fabricated chemically cross-linked polysaccharide-based three-dimensional (3D) porous scaffolds using an ink composed of nanofibrillated cellulose, carboxymethyl cellulose, and citric acid (CA), featuring strong shear thinning behavior and adequate printability. Scaffolds were produced by combining direct-ink-writing 3D printing, freeze-drying, and dehydrothermal heat-assisted cross-linking techniques. The last step induces a reaction of CA. Degree of cross-linking was controlled by varying the CA concentration (2.5-10.0 wt.%) to tune the structure, swelling, degradation, and surface properties (pores: 100-450 µm, porosity: 86%) of the scaffolds in the dry and hydrated states. Compressive strength, elastic modulus, and shape recovery of the cross-linked scaffolds increased significantly with increasing cross-linker concentration. Cross-linked scaffolds promoted clustered cell adhesion and showed no cytotoxic effects as determined by the viability assay and live/dead staining with human osteoblast cells. The proposed method can be extended to all polysaccharide-based materials to develop cell-friendly scaffolds suitable for tissue engineering applications.

Succinylation of Polyallylamine: Influence on Biological Efficacy and the Formation of Electrospun Fibers.

Succinylation of proteins is a commonly encountered reaction in biology and introduces negatively charged carboxylates on previously basic primary amine groups of amino acid residues. In analogy, this work investigates the succinylation of primary amines of the synthetic polyelectrolyte polyallylamine (PAA). It investigates the influence of the degree of succinylation on the cytotoxicity and antibacterial activity of the resulting polymers. Succinylation was performed in water with varying amounts of succinic anhydride and at different pH values. The PAA derivatives were analyzed in detail with respect to molecular structure using nuclear magnetic resonance and infrared absorbance spectroscopy. Polyelectrolyte and potentiometric charge titrations were used to elucidate charge ratios between primary amines and carboxylates in the polymers. The obtained materials were then evaluated with respect to their minimum inhibitory concentration against Staphylococcus aureus and Pseudomonas aeruginosa. The biocompatibility was assessed using mouse L929 fibroblasts. The degree of succinylation decreased cytotoxicity but more significantly reduced antibacterial efficacy, demonstrating the sensitivity of the fibroblast cells against this type of ampholytic polyelectrolytes. The obtained polymers were finally electrospun into microfiber webs in combination with neutral water-soluble polyvinyl alcohol. The resulting non-woven could have the potential to be used as wound dressing materials or coatings.

Influence of Charge and Heat on the Mechanical Properties of Scaffolds from Ionic Complexation of Chitosan and Carboxymethyl Cellulose.

As one of the most abundant, multifunctional biological polymers, polysaccharides are considered promising materials to prepare tissue engineering scaffolds. When properly designed, wetted porous scaffolds can have biomechanics similar to living tissue and provide suitable fluid transport, both of which are key features for in vitro and in vivo tissue growth. They can further mimic the components and function of glycosaminoglycans found in the extracellular matrix of tissues. In this study, we investigate scaffolds formed by charge complexation between anionic carboxymethyl cellulose and cationic protonated chitosan under well-controlled conditions. Freeze-drying and dehydrothermal heat treatment were then used to obtain porous materials with exceptional, unprecendent mechanical properties and dimensional long-term stability in cell growth media. We investigated how complexation conditions, charge ratio, and heat treatment significantly influence the resulting fluid uptake and biomechanics. Surprisingly, materials with high compressive strength, high elastic modulus, and significant shape recovery are obtained under certain conditions. We address this mostly to a balanced charge ratio and the formation of covalent amide bonds between the polymers without the use of additional cross-linkers. The scaffolds promoted clustered cell adhesion and showed no cytotoxic effects as assessed by cell viability assay and live/dead staining with human adipose tissue-derived mesenchymal stem cells. We suggest that similar scaffolds or biomaterials comprising other polysaccharides have a large potential for cartilage tissue engineering and that elucidating the reason for the observed peculiar biomechanics can stimulate further research.

Water-based carbodiimide mediated synthesis of polysaccharide-amino acid conjugates: Deprotection, charge and structural analysis.

We report here a one-step aqueous method for the synthesis of isolated and purified polysaccharide-amino acid conjugates. Two different types of amino acid esters: glycine methyl ester and L-tryptophan methyl ester, as model compounds for peptides, were conjugated to the polysaccharide carboxymethylcellulose (CMC) in water using carbodiimide at ambient conditions. Detailed and systematic pH-dependent charge titration and spectroscopy (infrared, nuclear magnetic resonance: 1H, 13C- DEPT 135, 1H- 13C HMBC/HSQC correlation), UV-vis, elemental and ninhydrin analysis provided solid and direct evidence for the successful conjugation of the amino acid esters to the CMC backbone via an amide bond. As the concentration of amino acid esters increased, a conjugation efficiency of 20-80% was achieved. Activated charcoal aided base-catalyzed deprotection of the methyl esters improved the solubility of the conjugates in water. The approach proposed in this work should have the potential to tailor the backbone of polysaccharides containing di- or tri-peptides.

Off-line multidimensional high performance thin-layer chromatography for fractionation of Japanese knotweed rhizome bark extract and isolation of flavan-3-ols, proanthocyanidins and anthraquinones.

A methodology based on off-line multidimensional thin-layer chromatography was developed for isolation of several secondary metabolites from bark of Japanese knotweed (Fallopia japonica Houtt.) rhizomes. Successive fractionation steps using PLC silica gel and HPTLC silica gel or HPTLC cellulose plates in combination with various developing solvents enabled isolation of (+)-catechin, (-)-epicatechin, (-)-epicatechin gallate, procyanidin B1, procyanidin B2, procyanidin B3, proanthocyanidin B dimer gallate, emodin, emodin-8-O-glucoside and emodin-8-O-malonyl-glucoside. Their identity was confirmed by HPTLC, HPTLC-MSn and for most of them also by 1H NMR and 2D NMR analyses. To the best of our knowledge emodin-8-O-malonyl-glucoside, procyanidins B1 and B2 were for the first time isolated from this plant material. HPTLC and HPTLC-MSn analyses were also performed as support of fractionation/isolation process, leading to first detection of some compounds in bark of Japanese knotweed rhizomes and Japanese knotweed rhizomes in general: procyanidins B1 and B2, methyl derivatives of emodin bianthrone and emodin bianthrone-hexose, resveratrol-malonyl-hexoside and taxifolin derivatives. Characterization of flavan-3-ols and proanthocyanidins was facilitated by post-chromatographic derivatization of the corresponding chromatographic zones with 4-dimethylaminocinnamaldehyde (DMACA) detection reagent.

Determination of d-Cycloserine Impurities in Pharmaceutical Dosage Forms: Comparison of the International Pharmacopoeia HPLC-UV Method and the DOSY NMR Method.

d-cycloserine is a broad-spectrum antibiotic that is currently being used as a secondary choice in the treatment of tuberculosis. In recent years, it has become more popular, due to its effect on the nervous system. In this current study, we provide evidence that The International Pharmacopoeia HPLC-UV method for d-cycloserine impurity profiling is not repeatable due to the variable response of cycloserine dimer, one of d-cycloserine impurities. Therefore, we introduced the DOSY (diffusion ordered spectroscopy) NMR (nuclear magnetic resonance) technique to determine the levels of d-cycloserine impurities in pharmaceutical dosage forms. The DOSY NMR technique allowed separation of d-cycloserine, its degradation products, and key process impurities in concentrations below pharmacopoeial specification limits. The proposed DOSY NMR method allowed accurate identification and quantification of the cycloserine dimer, which was not possible through the use of the pharmacopoeial HPLC method. The current method has the potential for practical use in analytical laboratories of the pharmaceutical industry.

Co-crystals, Salts or Mixtures of Both? The Case of Tenofovir Alafenamide Fumarates.

Tenofovir alafenamide fumarate (TAF) is the newest prodrug of tenofovir that constitutes several drug products used for the treatment of HIV/AIDS. Although the solid-state properties of its predecessor tenofovir disoproxil fumarate have been investigated and described in the literature, there are no data in the scientific literature on the solid state properties of TAF. In our report, we describe the preparation of two novel polymorphs II and III of tenofovir alafenamide monofumarate (TA MF2 and TA MF3). The solid-state structure of these compounds was investigated in parallel to the previously known tenofovir alafenamide monofumarate form I (TA MF1) and tenofovir alafenamide hemifumarate (TA HF). Interestingly, the single-crystal X-ray diffraction of TA HF revealed that this derivative exists as a co-crystal form. In addition, we prepared a crystalline tenofovir alafenamide free base (TA) and its hydrochloride salt (TA HCl), which enabled us to determine the structure of TA MF derivatives using 15N-ssNMR (15N-solid state nuclear magnetic resonance). Surprisingly, we observed that TA MF1 exists as a mixed ionization state complex or pure salt, while TA MF2 and TA MF3 can be obtained as pure co-crystal forms.

Interference of oleamide with analytical and bioassay results.

During sample preparation and analysis, samples are coming in contact with different labware materials. By four unrelated analytical (phytochemical and pharmaceutical) case-studies and employing different analytical techniques, we demonstrated the potential misinterpretation of analytical results due to the use of contaminants-leaching labware during sample handling. Oleamide, a common polymer lubricant and a bioactive compound, was identified as a main analytical interference, leaching from different labware items into solvents, recognised as chemically compatible with the tested polymer material. Moreover, anti-inflammatory effect of oleamide at 100 µg mL-1 and considerable pro-inflammatory effect of the plastic syringe extractables (containing oleamide) at the same level were shown in a TLR4-based bioassay. Taking these results into account, together with the fact that oleamide can be a compound of natural origin, we would like to notify the professional public regarding the possible erroneous oleamide-related analytical and bioassay results due to the use of oleamide-leaching labware. Researchers are alerted to double check the real source of oleamide (labware or natural extract), which will prevent further reporting of false results. Analysis of procedural blanks with de-novo developed UHPLC-ESI-MS method is, among some other strategies, proposed for detection of oleamide interference and avoidance of misleading results of certain analyses.

Generic Method for Designing Self-Standing and Dual Porous 3D Bioscaffolds from Cellulosic Nanomaterials for Tissue Engineering Applications.

Three-dimensional scaffolds (3D) with controlled shape, dual porosity and long-term mechanical and dimensional stability in biofluids are of interest as biotemplates in tissue engineering. Herein, self-standing and lightweight cellulose-based biogenic scaffolds with a spatially structured morphology, macropores and interconnected micropores were fabricated using a combination of direct ink writing 3D printing and freeze-drying techniques. This was achieved by developing a water-based and low-cost bicomponent ink based on commercially available nanofibrillated cellulose (NFC) and carboxymethyl cellulose (CMC). Physical cross-linking through dehydrothermal treatment significantly increased the surface hardness, indentation modulus, compression strength, as well as the dimensional stability of the scaffolds in biofluids, in comparison to untreated materials. However, no differences in the spectra of solid state nuclear magnetic resonance or infrared were observed for dehydrothermal treated samples, suggesting that the increase of mechanical properties and dimensional stability is based on the physical cross-linking of functional groups both at the interface between NFC and CMC. The supramolecular structure of the polymers was well-preserved as disclosed by X-ray diffraction measurements. The cross-linked scaffolds showed high proliferation, viability, and attachment of human bone tissue derived osteoblast cells (hFOB). The simple and straightforward avenue proposed here for the design of cellulose-based fibrous inks and dual porous scaffolds from the commercially available materials and without the need of any additional cross-linkers should pave the way for the development of implantable, degradable scaffolds and cell-laden biomaterials for bone tissue regeneration and 3D bioprinting applications.

Probing the Effects of Pyrimidine Functional Group Switches on Acyclic Fleximer Analogues for Antiviral Activity.

Due to their ability to inhibit viral DNA or RNA replication, nucleoside analogues have been used for decades as potent antiviral therapeutics. However, one of the major limitations of nucleoside analogues is the development of antiviral resistance. In that regard, flexible nucleoside analogues known as "fleximers" have garnered attention over the years due to their ability to survey different amino acids in enzyme binding sites, thus overcoming the potential development of antiviral resistance. Acyclic fleximers have previously demonstrated antiviral activity against numerous viruses including Middle East Respiratory Syndrome coronavirus (MERS-CoV), Ebola virus (EBOV), and, most recently, flaviviruses such as Dengue (DENV) and Yellow Fever Virus (YFV). Due to these interesting results, a Structure Activity Relationship (SAR) study was pursued in order to analyze the effect of the pyrimidine functional group and acyl protecting group on antiviral activity, cytotoxicity, and conformation. The results of those studies are presented herein.

1H NMR metabolomics of microbial metabolites in the four MW agricultural biogas plant reactors: A case study of inhibition mirroring the acute rumen acidosis symptoms.

In this study, nuclear magnetic resonance (1H NMR) spectroscopic profiling was used to provide a more comprehensive view of microbial metabolites associated with poor reactor performance in a full-scale 4 MW mesophilic agricultural biogas plant under fully operational and also under inhibited conditions. Multivariate analyses were used to assess the significance of differences between reactors whereas artificial neural networks (ANN) were used to identify the key metabolites responsible for inhibition and their network of interaction. Based on the results of nm-MDS ordination the subsamples of each reactor were similar, but not identical, despite homogenization of the full-scale reactors before sampling. Hence, a certain extent of variability due to the size of the system under analysis was transferred into metabolome analysis. Multivariate analysis showed that fully active reactors were clustered separately from those containing inhibited reactor metabolites and were significantly different. Furthermore, the three distinct inhibited states were significantly different from each other. The inhibited metabolomes were enriched in acetate, caprylate, trimethylamine, thymine, pyruvate, alanine, xanthine and succinate. The differences in the metabolic fingerprint between inactive and fully active reactors observed in this study resembled closely the metabolites differentiating the (sub) acute rumen acidosis inflicted and healthy rumen metabolomes, creating thus favorable conditions for the growth and activity of pathogenic bacteria. The consistency of our data with those reported before for rumen ecosystems shows that 1H NMR based metabolomics is a reliable approach for the evaluation of metabolic events at full-scale biogas reactors.

Intestinal Metagenomes and Metabolomes in Healthy Young Males: Inactivity and Hypoxia Generated Negative Physiological Symptoms Precede Microbial Dysbiosis.

We explored the metagenomic, metabolomic and trace metal makeup of intestinal microbiota and environment in healthy male participants during the run-in (5 day) and the following three 21-day interventions: normoxic bedrest (NBR), hypoxic bedrest (HBR) and hypoxic ambulation (HAmb) which were carried out within a controlled laboratory environment (circadian rhythm, fluid and dietary intakes, microbial bioburden, oxygen level, exercise). The fraction of inspired O2 (FiO2) and partial pressure of inspired O2 (PiO2) were 0.209 and 133.1 ± 0.3 mmHg for the NBR and 0.141 ± 0.004 and 90.0 ± 0.4 mmHg (~4,000 m simulated altitude) for HBR and HAmb interventions, respectively. Shotgun metagenomes were analyzed at various taxonomic and functional levels, 1H- and 13C -metabolomes were processed using standard quantitative and human expert approaches, whereas metals were assessed using X-ray fluorescence spectrometry. Inactivity and hypoxia resulted in a significant increase in the genus Bacteroides in HBR, in genes coding for proteins involved in iron acquisition and metabolism, cell wall, capsule, virulence, defense and mucin degradation, such as beta-galactosidase (EC3.2.1.23), α-L-fucosidase (EC3.2.1.51), Sialidase (EC3.2.1.18), and α-N-acetylglucosaminidase (EC3.2.1.50). In contrast, the microbial metabolomes, intestinal element and metal profiles, the diversity of bacterial, archaeal and fungal microbial communities were not significantly affected. The observed progressive decrease in defecation frequency and concomitant increase in the electrical conductivity (EC) preceded or took place in absence of significant changes at the taxonomic, functional gene, metabolome and intestinal metal profile levels. The fact that the genus Bacteroides and proteins involved in iron acquisition and metabolism, cell wall, capsule, virulence and mucin degradation were enriched at the end of HBR suggest that both constipation and EC decreased intestinal metal availability leading to modified expression of co-regulated genes in Bacteroides genomes. Bayesian network analysis was used to derive the first hierarchical model of initial inactivity mediated deconditioning steps over time. The PlanHab wash-out period corresponded to a profound life-style change (i.e., reintroduction of exercise) that resulted in stepwise amelioration of the negative physiological symptoms, indicating that exercise apparently prevented the crosstalk between the microbial physiology, mucin degradation and proinflammatory immune activities in the host.

Small molecule purine and pseudopurine derivatives: synthesis, cytostatic evaluations and investigation of growth inhibitory effect in non-small cell lung cancer A549.

Novel halogenated purines and pseudopurines with diverse aryl-substituted 1,2,3-triazoles were prepared. While p-(trifluoromethyl)-substituted 1,2,3-triazole in N-9 alkylated purine and 3-deazapurine was critical for strong albeit unselective activity on pancreatic adenocarcinoma cells CFPAC-1,1-(p-fluorophenyl)-1,2,3-triazole derivative of 7-deazapurine showed selective cytostatic effect on metastatic colon cancer cells SW620. Importantly, 1-(p-chlorophenyl)-1,2,3-triazole-tagged benzimidazole displayed the most pronounced and highly selective inhibitory effect in nM range on non-small cell lung cancer A549. This compound revealed to target molecular processes at the extracellular side and inside the plasma membrane regulated by GPLD1 and growth factor receptors PDGFR and IGF-1R leading to the inhibition of cell proliferation and induction of apoptosis mediated by p38 MAP kinase and NF-κB, respectively. Further optimisation of this compound as to reduce its toxicity in normal cells may lead to the development of novel agent effective against lung cancer.

A Kinetic Approach in the Evaluation of Radical-Scavenging Efficiency of Sinapic Acid and Its Derivatives.

A kinetic approach was used to determine the radical scavenging activities of sinapic acid and its derivatives: sinapine, 4-vinylsyringol, syringic acid, syringaldehyde, and ethyl, propyl and butyl sinapate. The responses were expressed as rates of 2,2-diphenyl-1-picrylhydrazyl radical (DPPH˙) scavenging (RS), superoxide radical (O2˙-) scavenging (RFF), and ß-carotene bleaching in the emulsion system (RB). For RS and RB, the esters of sinapic acid showed the highest responses while, for RFF, this was seen for syringic acid. The effectiveness of the selected compounds for scavenging these free radicals was also determined at a fixed endpoint. The early response parameters were demonstrated to be good discriminators in assessing differences for antioxidants with comparable fixed endpoint activity. The primary feature that ranks the kinetic data and the endpoint determinations is interpreted in terms of the mechanisms of the reactions involved in each of the assays conducted.