Correction to Crystal Structure of Poly(7-heptalactone).

[This corrects the article DOI: 10.1021/acs.macromol.3c00710.].

Synthesis, Morphology, and Crystallization Kinetics of Polyheptalactone (PHL).

Aliphatic polyesters are widely studied due to their excellent properties and low-cost production and also because, in many cases, they are biodegradable and/or recyclable. Therefore, expanding the range of available aliphatic polyesters is highly desirable. This paper reports the synthesis, morphology, and crystallization kinetics of a scarcely studied polyester, polyheptalactone (PHL). First, we synthesized the η-heptalactone monomer by the Baeyer-Villiger oxidation of cycloheptanone before several polyheptalactones of different molecular weights (in the range between 2 and 12 kDa), and low dispersities were prepared by ring-opening polymerization (ROP). The influence of molecular weight on primary nucleation rate, spherulitic growth rate, and overall crystallization rate was studied for the first time. All of these rates increased with PHL molecular weight, and they approached a plateau for the highest molecular weight samples employed here. Single crystals of PHLs were prepared for the first time, and hexagonal-shaped flat single crystals were obtained. The study of the crystallization and morphology of PHL revealed strong similarities with PCL, making PHLs very promising materials, considering their potential biodegradable character.

Structure and Morphology of Crystalline Syndiotactic Polypropylene-Polyethylene Block Copolymers.

A study of the structure and morphology of diblock copolymers composed of crystallizable blocks of polyethylene (PE) and syndiotactic polypropylene (sPP) having different lengths is reported. In both analyzed samples, the PE block crystallizes first by cooling from the melt (at 130 °C) and the sPP block crystallizes after at a lower temperature. Small angle X-ray scattering (SAXS) recorded during cooling showed three correlation peaks at values of the scattering vector, q1 = 0.12 nm-1, q2 = 0.24 nm-1 and q3 = 0.4 nm-1, indicating development of a lamellar morphology, where lamellar domains of PE and sPP alternate, each domain containing stacks of crystalline lamellae of PE or sPP sandwiched by their own amorphous phase of PE or sPP. At temperatures higher than 120 °C, when only PE crystals are formed, the morphology is defined by the formation of stacks of PE lamellae (17 nm thick) alternating with amorphous layers and with a long period of nearly 52 nm. At lower temperatures, when crystals of sPP are also well-formed, the morphology is more complex. A model of the morphology at room temperature is proposed based on the correlation distances determined from the self-correlation functions extracted from the SAXS data. Lamellar domains of PE (41.5 nm thick) and sPP (8.2 nm thick) alternate, each domain containing stacks of crystalline lamellae sandwiched by their own amorphous phase, forming a global morphology having a total lamellar periodicity of 49.7 nm, characterized by alternating amorphous and crystalline layers, where the crystalline layers are alternatively made of stacks of PE lamellae (22 nm thick) and thinner sPP lamellae (only 3.5 nm thick).

Ethylene-co-norbornene Copolymerization Using a Dual Catalyst System in the Presence of a Chain Transfer Agent.

Ethylene-co-norbornene copolymers were synthesized by a dual catalyst system at three concentrations of norbornene in the feed and variable amounts of ZnEt2, as a possible chain transfer agent. The dual catalyst system consists of two ansa-metallocenes, isopropyliden(η5-cyclopentadienyl)(η5-indenyl)zirconium dichloride (1) and isopropyliden(η5-3-methylcyclopentadienyl)(η5-fluorenyl)zirconium dichloride (2), activated with dimethylanilinium tetrakis(pentafluorophenyl)borate, in presence of TIBA. Values of norbornene content, molecular mass, glass transition temperature, and reactivity ratios r11 and r21 of copolymers prepared in the presence of 1+2 are intermediate between those of reference copolymers. The study of tensile and elastic properties of ethylene-co-norbornene copolymers (poly(E-co-N)s) gave evidence that copolymers were obtained in part through transfer of polymer chains between different transition metal sites. Mechanical properties are clearly different from those expected from a blend of the parent samples and reveal that copolymers obtained in the presence of 1+2 and ZnEt2 consist of a reactor blend of segmented chains produced by exchange from 2 to 1 and 1 to 2 acting as the ideal compatibilizer of chains produced by the chain transfer from 1 to 1, and from 2 to 2.

Artificial Heme Enzymes for the Construction of Gold-Based Biomaterials.

Many efforts are continuously devoted to the construction of hybrid biomaterials for specific applications, by immobilizing enzymes on different types of surfaces and/or nanomaterials. In addition, advances in computational, molecular and structural biology have led to a variety of strategies for designing and engineering artificial enzymes with defined catalytic properties. Here, we report the conjugation of an artificial heme enzyme (MIMO) with lipoic acid (LA) as a building block for the development of gold-based biomaterials. We show that the artificial MIMO@LA can be successfully conjugated to gold nanoparticles or immobilized onto gold electrode surfaces, displaying quasi-reversible redox properties and peroxidase activity. The results of this work open interesting perspectives toward the development of new totally-synthetic catalytic biomaterials for application in biotechnology and biomedicine, expanding the range of the biomolecular component aside from traditional native enzymes.

Time-Resolving Study of Stress-Induced Transformations of Isotactic Polypropylene through Wide Angle X-ray Scattering Measurements.

The development of a highly oriented fiber morphology by effect of tensile deformation of stereodefective isotactic polypropylene (iPP) samples, starting from the unoriented γ form, is studied by following the transformation in real time during stretching through wide angle X-ray scattering (WAXS) measurements. In the stretching process, after yielding, the initial γ form transforms into the mesomorphic form of iPP through mechanical melting and re-crystallization. The analysis of the scattering invariant measured in the WAXS region highlights that the size of the mesomorphic domains included in the well oriented fiber morphology obtained at high deformations increases through a process which involves the coalescence of the small fragments formed by effect of tensile stress during lamellar destruction with the domain of higher dimensions.

Nano-in-Nano Approach for Enzyme Immobilization Based on Block Copolymers.

We set up a facile approach for fabrication of supports with tailored nanoporosity for immobilization of enzymes. To this aim block copolymers (BCPs) self-assembly has been used to prepare nanostructured thin films with well-defined architecture containing pores of tailorable size delimited by walls with tailorable degree of hydrophilicity. In particular, we employed a mixture of polystyrene-block-poly(l-lactide) (PS-PLLA) and polystyrene-block-poly(ethylene oxide) (PS-PEO) diblock copolymers to generate thin films with a lamellar morphology consisting of PS lamellar domains alternating with mixed PEO/PLLA blocks lamellar domains. Selective basic hydrolysis of the PLLA blocks generates thin films, patterned with nanometric channels containing hydrophilic PEO chains pending from PS walls. The shape and size of the channels and the degree of hydrophilicity of the pores depend on the relative length of the blocks, the molecular mass of the BCPs, and the composition of the mixture. The strength of our approach is demonstrated in the case of physical adsorption of the hemoprotein peroxidase from horseradish (HRP) using 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) with H2O2 as substrate. The large surface area, the tailored pore sizes, and the functionalization with hydrophilic PEO blocks make the designed nanostructured materials suitable supports for the nanoconfinement of HRP biomolecules endowed with high catalytic performance, no mass-transfer limitations, and long-term stability.

Controlling Size and Orientation of Lamellar Microdomains in Crystalline Block Copolymers.

Highly ordered lamellar nanostructures with high orientation of lamellar microdomains have been obtained by epitaxial crystallization of crystalline diblock copolymers constituted by crystalline polyethylene (PE) linked to an amorphous block of a propene-ethene random copolymer (EP). The epitaxial crystallization onto crystals of p-chlorobenzoic acid induces formation of crystalline PE lamellae highly aligned along one direction, resulting in ordered lamellar nanostructures with perfectly aligned layers of crystalline PE alternating to amorphous layers of EP block. The periodicity of the lamellar structure can be modulated by modifying the molecular mass of the amorphous EP block. Epitaxy has been coupled with the technique of gold decoration so that the ordered nanostructures produced by epitaxy act as template for the formation of long, straight, and parallel rows of gold nanoparticles.

Nanometal Skin of Plasmonic Heterostructures for Highly Efficient Near-Field Scattering Probes.

In this work, atomic force microscopy probes are functionalized by virtue of self-assembling monolayers of block copolymer (BCP) micelles loaded either with clusters of silver nanoparticles or bimetallic heterostructures consisting of mixed species of silver and gold nanoparticles. The resulting self-organized patterns allow coating the tips with a sort of nanometal skin made of geometrically confined nanoislands. This approach favors the reproducible engineering and tuning of the plasmonic properties of the resulting structured tip by varying the nanometal loading of the micelles. The newly conceived tips are applied for experiments of tip-enhanced Raman scattering (TERS) spectroscopy and scattering-type scanning near-field optical microscopy (s-SNOM). TERS and s-SNOM probe characterizations on several standard Raman analytes and patterned nanostructures demonstrate excellent enhancement factor with the possibility of fast scanning and spatial resolution <12 nm. In fact, each metal nanoisland consists of a multiscale heterostructure that favors large scattering and near-field amplification. Then, we verify the tips to allow challenging nongap-TER spectroscopy on thick biosamples. Our approach introduces a synergistic chemical functionalization of the tips for versatile inclusion and delivery of plasmonic nanoparticles at the tip apex, which may promote the tuning of the plasmonic properties, a large enhancement, and the possibility of adding new degrees of freedom for tip functionalization.

Tuning Ordered Pattern of Pd Species through Controlled Block Copolymer Self-Assembly.

We report a method for the preparation of ordered patterns of Pd species on a substrate based on the use of polystyrene-block-poly(ethylene oxide) copolymer (PS-b-PEO) templates and selective inclusion of palladium (Pd) species in the PEO domains. PS-b-PEO samples of different total molecular masses self-assemble in a cylindrical microphase-separated morphology, in which vertically aligned PEO cylinders, with different diameters depending on the molecular mass, are organized in a hexagonal array of different lateral spacings. The cylindrical nanostructure is maintained after the selective inclusion of Pd species (Pd acetate and Pd nanoparticles (NPs) after reduction of Pd ions of the salt) in the PEO cylinders so that the characteristic sizes (diameters and lateral spacings) of the included Pd species are tuned by the characteristic sizes of the block copolymer (BCP) template, which are regulated by molecular mass. Treatment of nanocomposites at elevated temperatures in air removes the polymer matrix and leads to the formation of arrays of palladium oxide (PdO) NPs covering a solid support. The patterns of PdO NPs are characterized by different particle diameters and gap distances, mirroring the patterns and characteristic nanodimensions of the parent BCPs used as templates.

Nanoscale engineering of two-dimensional disordered hyperuniform block-copolymer assemblies.

Disordered hyperuniform (DH) media have been recognized as a new state of disordered matter that broadens our vision of material engineering. Here, long-range correlated disordered two-dimensional patterns are fabricated by self-assembling of spherical diblock-copolymer (BCP) micelles. Control of the self-assembling parameters leads to the formation of DH patterns of micelles that can host nanoscale material inclusions, therefore providing an effective strategy for fabricating multimaterial DH structures at molecular scale. Centroidal patterns are accurately determined by virtue of BCP micelles loaded with metal nanoparticles. Our analysis reveals the signature of nearly ideal DH BCP assemblies in the local density fluctuation and a dominant linear scaling in the local number fluctuation.

G-quadruplexes from human telomeric DNA: how many conformations in PEG containing solutions?

G-quadruplex structures are an attractive target for the development of anticancer drugs, as their formation in human telomere induces a DNA damage response followed by apoptosis in cancer cells. However, the development of new anticancer drugs by means of structural-based drug design is hampered by a lack of accurate information on the exact G-quadruplex conformation adopted by the human telomeric DNA under physiological conditions. Several groups reported that, in a molecular crowded, cell-like environment, simulated by polyethylene glycol (PEG), the human telomeric DNA adopts the parallel G-quadruplex conformation. These studies have suggested that 40% (w/v) PEG concentration induces complete structural conversion from the other known human telomeric G-quadruplex conformations to the parallel G-quadruplex, thus simplifying the high structural polymorphism existing in the absence of PEG. In this study, we demonstrate that the structural conversion to the parallel G-quadruplex is not a complete reaction at physiological temperature. We report a complete kinetic and thermodynamic characterization of the conformational transitions involving the (TTAGGG)(4)TT and (TTAGGG)(8)TT human telomeric DNA sequences in K(+) solution containing PEG. Our data show that the hybrid-type and parallel conformations coexist at equilibrium in the presence of PEG at physiological temperature and the degree of the quadruplex interconversion depends on the PEG molecular weight. Further, we find that telomeric DNA folds in the parallel quadruplex in the seconds time scale, a much larger time scale than the one reported for the hybrid quadruplex folding (~ms). The whole of our data allow us to predict the relative amount of each G-quadruplex conformation as a function of temperature and time. The effect of other crowding agents like Ficoll 400 and glycerol on the quadruplex interconversion has been also explored.

Secondary metabolites from the aerial parts of Salvia palaestina Bentham.

Three sesterterpenes (1-3), one triterpene (4) and five diterpenes (5-9) were isolated from the aerial parts of Salvia palaestina Bentham (Lamiaceae), together with two sesquiterpenes, 10 known diterpenes, three triterpenes, and rosmarinic acid. Their structural elucidation was accomplished by extensive spectroscopic methods including 1D ((1)H, (13)C, (13)C DEPT, TOCSY, NOESY) and 2D NMR experiments (DQF-COSY, HSQC, HMBC, ROESY) as well as ESIMS analysis and chemical analysis.