Thermocapillary migration of a drop with a thermally conducting stagnant cap.

Hypothesis The thermocapillary migration of a spherical drop with a stagnant cap in the presence of a constant applied temperature gradient can be strongly affected by the finite thermal conductivity of the stagnant cap. Numerics The heat conduction of the stagnant cap is analytically modeled. The effects of the additional interfacial stresses generated by the disturbances to the local temperature field due to the presence of the cap at the fluid-fluid interface and the corresponding velocity of migration of the drop are evaluated by solving for the temperature and hydrodynamic field equations in and around the drop. An asymptotic model is derived to predict the terminal velocity in the presence of an infinitely conducting stagnant cap. Findings The effects of the surface conductivity and size of the stagnation region alongside the bulk thermal conductivities and viscosities of the drop and surrounding media are evaluated. The terminal velocity of the drop is shown to have a monotonic dependence on the conductivity of the stagnant cap. The bounds to the terminal velocity increment due to the stagnant cap are derived. These bounds can be of significance to multiphysics problems involving particle laden drops, Pickering emulsions and other multi-phase technologies where the conductivity of the surface adsorbents is non-negligible.

A Heat Transfer Model and Supporting Experiments to Guide the Uniform Gelation of Molecular Oleogels During Scale-up.

The quest for novel vegetable oil structuring strategies has been progressing since the discovery of the deleterious impacts of trans fats. Although oleogelation using bioderived molecular gelators has been proven to be successful as an alternative to traditional hydrogenation methods, efforts are needed to meet the industrial requirements. A major constraint during the fabrication of oleogels is to achieve consistency in physical properties during scale-up. Experiments showed that gelation fails to occur when larger volumes were prepared based on the minimum gelation concentration (MGC) of gelators, determined using the smallest oil volume (1 mL), a general laboratory practice. This observation was consistent with all the molecular gelators used in this study; sorbitol dioctanoate, mannitol dioctanoate, and 12-hydroxystearic acid. To understand this behavior, a mathematical model was developed since gelator network propagation is governed by the cooling rate. The model indicates that maintenance of a minimal thermal gradient via uniform heat dissipation and gelation time is necessary to achieve homogeneous gel propagation across the vial. With these predictions, we hypothesized and confirmed that oleogels with constant surface area-to-volume ratio could result in identical gelation times and consistent physical properties (MGC, melting temperature, melting enthalpy, yield stress, solid phase content, and oil binding capacity) during scale-up.

Hydrodynamic interactions between charged and uncharged Brownian colloids at a fluid-fluid interface.

HYPOTHESIS: The cluster formation and self-assembly of floating colloids at a fluid/fluid interface is a delicate force balance involving deterministic lateral interaction forces, viscous resistance to relative colloid motion along the surface and thermal (Brownian) fluctuations. As the colloid dimensions get smaller, thermal forces and associated drag forces become important and can affect the self assembly into ordered patterns and crystal structures that are the starting point for various materials applications. NUMERICS: Langevin dynamic simulations for particle pairs straddling a liquid-liquid interface with a high viscosity contrast are presented to describe the lateral interfacial assembly of particles in Brownian and non-Brownian dominated regimes. These simulations incorporate capillary attraction, electrostatic repulsion, thermal fluctuations and hydrodynamic interactions (HI) between particles (including the effect of the particle immersion depth). Simulation results are presented for neutrally wetted particles which form a contact angle θ=900 at the interface. FINDINGS: The simulation results suggest that clustering, fractal growth and particle ordering become favorable outcomes at critically large values of the Pe numbers, while smaller Pe numbers exhibit higher probabilities of final configurations where particle motion remains uncorrelated in space and particle pairs are found to be more widely separated especially upon the introduction of HI.

Differential Surface Adsorption Phenomena for Conventional and Novel Surfactants Correlates with Changes in Interfacial mAb Stabilization.

Protein adsorption on surfaces can result in loss of drug product stability and efficacy during the production, storage, and administration of protein-based therapeutics. Surface-active agents (excipients) are typically added in protein formulations to prevent undesired interactions of proteins on surfaces and protein particle formation/aggregation in solution. The objective of this work is to understand the molecular-level competitive adsorption mechanism between the monoclonal antibody (mAb) and a commercially used excipient, polysorbate 80 (PS80), and a novel excipient, N-myristoyl phenylalanine-N-polyetheramine diamide (FM1000). The relative rate of adsorption of PS80 and FM1000 was studied by pendant bubble tensiometry. We find that FM1000 saturates the interface faster than PS80. Additionally, the surface-adsorbed amounts from X-ray reflectivity (XRR) measurements show that FM1000 blocks a larger percentage of interfacial area than PS80, indicating that a lower bulk FM1000 surface concentration is sufficient to prevent protein adsorption onto the air/water interface. XRR models reveal that with an increase in mAb concentration (0.5-2.5 mg/mL: IV based formulations), an increased amount of PS80 concentration (below critical micelle concentration, CMC) is required, whereas a fixed value of FM1000 concentration (above its relatively lower CMC) is sufficient to inhibit mAb adsorption, preventing mAb from co-existing with surfactants on the surface layer. With this observation, we show that the CMC of the surfactant is not the critical factor to indicate its ability to inhibit protein adsorption, especially for chemically different surfactants, PS80 and FM1000. Additionally, interface-induced aggregation studies indicate that at minimum surfactant concentration levels in protein formulations, fewer protein particles form in the presence of FM1000. Our results provide a mechanistic link between the adsorption of mAbs at the air/water interface and the aggregation induced by agitation in the presence of surfactants.

Solid with infused reactive liquid (SWIRL): A novel liquid-based separation approach for effective CO2 capture.

Economical CO2 capture demands low-energy separation strategies. We use a liquid-infused surface (LIS) approach to immobilize reactive liquids, such as amines, on a textured and thermally conductive solid substrate with high surface-area to volume ratio (A/V) continuum geometry. The infused, micrometer-thick liquid retains that high A/V and directly contacts the gas phase, alleviating mass transport resistance typically encountered in mesoporous solid adsorbents. We name this LIS class "solid with infused reactive liquid" (SWIRL). SWIRL-amine requires no water dilution or costly mixing unlike the current liquid-based commercial approach. SWIRL-tetraethylenepentamine (TEPA) shows stable, high capture capacities at power plant CO2 concentrations near flue gas temperatures, preventing energy-intensive temperature swings needed for other approaches. Water vapor increases CO2 capacity of SWIRL-TEPA without compromising stability.

Surfactant and dilatational viscosity effects on the deformation of liquid droplets in an electric field.

HYPOTHESIS: A conducting droplet suspended in an insulating continuous phase, e.g. an aqueous electrolyte in an oil, is deformed by an applied electric field to nonspherical equilibrium shapes, and can even break-up under strong fields. Many technologies use electro-deformation to manipulate fluid dispersions, with surfactants present on the droplet interfaces forming stabilizing monolayers. While surfactants lower the interface tension which facilitates electro-deformation, the monolayer elasticity resists deformation. High molecular weight surfactants, with large dilatational viscosities, can potentially retard the deformation dynamics. NUMERICS: A boundary integral method simulates the dynamic interfacial deformation of a perfectly conducting droplet in a dielectric in a uniform field. The interface contains an insoluble monolayer which is a Newtonian fluid with constant dilatational viscosity obeying a Langmuir state equation. A range of initial surfactant surface concentrations are studied, with elasticity proportional to concentration. FINDINGS: Equilibrium drop deformations, unaffected by surface viscosity, are strongly resisted by elasticity at high surface concentrations, and field strengths necessary for break-up increase with elasticity. Dilatational viscosity scales with the ratio, κ∗, the surface viscosity (divided by the droplet radius) to the bulk viscosity, and can extend the deformation time. Extended times are described by a time rescaling proportional to κ∗.

No ordinary proteins: Adsorption and molecular orientation of monoclonal antibodies.

The interaction of monoclonal antibodies (mAbs) with air/water interfaces plays a crucial role in their overall stability in solution. We aim to understand this behavior using pendant bubble measurements to track the dynamic tension reduction and x-ray reflectivity to obtain the electron density profiles (EDPs) at the surface. Native immunoglobulin G mAb is a rigid molecule with a flat, "Y" shape, and simulated EDPs are obtained by rotating a homology construct at the surface. Comparing simulations with experimental EDPs, we obtain surface orientation probability maps showing mAbs transition from flat-on Y-shape configurations to side-on or end-on configurations with increasing concentration. The modeling also shows the presence of ß sheets at the surface. Overall, the experiments and the homology modeling elucidate the orientational phase space during different stages of adsorption of mAbs at the air/water interface. These finding will help define new strategies for the manufacture and storage of antibody-based therapeutics.

Electrochemical Immunosensing of Interleukin-6 in Human Cerebrospinal Fluid and Human Serum as an Early Biomarker for Traumatic Brain Injury.

In this work, we develop a label-free electrochemical immunosensor for the detection of interleukin-6 (IL-6) in human cerebrospinal fluid (CSF) and serum for diagnostic and therapeutic monitoring. The IL-6 immunosensor is fabricated from gold interdigitated electrode arrays (IDEAs) that are modified with IL-6 antibodies for direct antigen recognition and capture. A rigorous surface analysis of the sensor architecture was conducted to ensure high structural fidelity and performance. Electrochemical characterization was conducted by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), and sensing was performed using differential pulse voltammetry (DPV). The DPV peak current was used to quantify IL-6 in buffer, CSF, and serum in the range 1 pg mL-1 < [IL-6] < 1 µg mL-1. The IL-6 IDEA sensor achieved a limit of detection (LOD) of 1.63 pg mL-1 in PBS, 2.34 pg mL-1 in human CSF, and 11.83 pg mL-1 in human serum. The sensor response is linear in the concentration range 10 pg mL-1 < [IL-6] < 10 ng mL-1, and the sensor is selective for IL-6 over other common cytokines, including IL-10 and TNF-α. EIS measurements showed that the resistance to charge transfer, R CT, decreases upon IL-6 binding, an observation attributed to a structural change upon Ab-Ag binding that opens up the architecture so that the redox probe can more easily access the electrode surface. The IL-6 IDEA sensor can be used as a point-of-care diagnostic tool to deliver rapid results (∼3 min) in clinical settings for traumatic brain injury, and potentially address the unmet need for effective diagnostic and prognostic tools for other cytokine-related illnesses, such as sepsis and COVID-19 induced cytokine storms. Given the interdigitated electrode form factor, it is likely that the performance of the sensor can be further improved through redox cycling.

Microfluidic Study of the Electrocoalescence of Aqueous Droplets in Crude Oil.

In electrocoalescence, an electric field is applied to a dispersion of conducting water droplets in a poorly conducting oil to force the droplets to merge in the direction of the field. Electrocoalescence is used in petroleum refining to separate water from crude oil and in droplet-based microfluidics to combine droplets of water in oil and to break emulsions. Using a microfluidic design to generate a two-dimensional (2D) emulsion, we demonstrate that electrocoalescence in an opaque crude oil can be visualized with optical microscopy and studied on an individual droplet basis in a chamber whose height is small enough to make the dispersions two dimensional and transparent. From reconstructions of images of the 2D electrocoalescence, the electrostatic forces driving the droplet merging are calculated in a numerically exact manner and used to predict observed coalescence events. Hence, the direct simulation of the electrocoalescence-driven breakdown of 2D emulsions in microfluidic devices can be envisioned.

Armoring the Interface with Surfactants to Prevent the Adsorption of Monoclonal Antibodies.

The pharmaceutical industry uses surface-active agents (excipients) in protein drug formulations to prevent the aggregation, denaturation, and unwanted immunological response of therapeutic drugs in solution as well as at the air/water interface. However, the mechanism of adsorption, desorption, and aggregation of proteins at the interface in the presence of excipients remains poorly understood. The objective of this work is to explore the molecular-scale competitive adsorption process between surfactant-based excipients and two monoclonal antibody (mAb) proteins, mAb-1 and mAb-2. We use pendant bubble tensiometry to measure the ensemble average adsorption dynamics of mAbs with and without the excipient. The surface tension measurements allow us to quantify the rate at which the molecules "race" to the interface in single-component and mixed systems. These results define the phase space, where coadsorption of both mAbs and excipients occurs onto the air/water interface. In parallel, we use X-ray reflectivity (XR) measurements to understand the molecular-scale dynamics of competitive adsorption, revealing the surface-adsorbed amounts of the antibody and excipient. XR has revealed that at a sufficiently high surface concentration of the excipient, mAb adsorption to the surface and subsurface domains was inhibited. In addition, despite the fact that both mAbs adsorb via a similar mechanistic pathway and with similar dynamics, a key finding is that the competition for the interface directly correlates with the surface activity of the two mAbs, resulting in a fivefold difference in the concentration of the excipient needed to displace the antibody.

Soil granular dynamics on-a-chip: fluidization inception under scrutiny.

Predicting soil evolution remains a scientific challenge. This process involves poorly understood aspects of disordered granular matter and dense suspension dynamics. This study presents a novel two-dimensional experiment on a small-scale chip structure; this allows the observation of the deformation at the particle scale of a large-grained sediment bed, under conditions where friction dominates over cohesive and thermal forces, and with an imposed fluid flow. Experiments are performed under conditions which span the particle resuspension criterion, and particle motion is detected and analyzed. The void size population and statistics of particle trajectories bring insight into the sediment dynamics near fluidization conditions. Specifically, particle rearrangement and net bed compaction are observed at flow rates significantly below the criterion for instability growth. Above a threshold flowrate, a channel forms and grows in the vertical direction; and eventually it crosses the entire bed. In the range of flow rates where channelization can occur, the coexistence of compacting and dilating bed scenarios is observed. The results of the study enhance our capacity for modeling of both slow dynamics and eventual rapid destabilization of sediment beds. Microfluidic channel soil-on-a-chip studies open avenues to new investigations including dissolution-precipitation, fine particle transport, or micro-organism swimming and population growth, which may depend on the mechanics of the porous medium itself.

The Translational and Rotational Dynamics of a Colloid Moving Along the Air-Liquid Interface of a Thin Film.

This study examines the translation and rotation of a spherical colloid straddling the (upper) air/liquid interface of a thin, planar, liquid film bounded from below by either a solid or a gas/liquid interface. The goal is to obtain numerical solutions for the hydrodynamic flow in order to understand the influence of the film thickness and the lower interface boundary condition. When the colloid translates on a film above a solid, the viscous resistance increases significantly as the film thickness decreases due to the fluid-solid interaction, while on a free lamella, the drag decreases due to the proximity to the free (gas/liquid) surface. When the colloid rotates, the contact line of the interface moves relative to the colloid surface. If no-slip is assumed, the stress becomes infinite and prevents the rotation. Here finite slip is used to resolve the singularity, and for small values of the slip coefficient, the rotational viscous resistance is dominated by the contact line stress and is surprisingly less dependent on the film thickness and the lower interface boundary condition. For a colloid rotating on a semi-infinite liquid layer, the rotational resistance is largest when the colloid just breaches the interface from the liquid side.

Unravelling the secret of seed-based gels in water: the nanoscale 3D network formation.

Chia (Salvia hispanica) and basil (Ocimum basilicum) seeds have the intrinsic ability to form a hydrogel concomitant with moisture-retention, slow releasing capability and proposed health benefits such as curbing diabetes and obesity by delaying digestion process. However, the underlying mode of gelation at nanoscopic level is not clearly explained or explored. The present study elucidates and corroborates the hypothesis that the gelling behavior of such seeds is due to their nanoscale 3D-network formation. The preliminary study revealed the influence of several conditions like polarity, pH and hydrophilicity/hydrophobicity on fiber extrusion from the seeds which leads to gelation. Optical microscopic analysis clearly demonstrated bundles of fibers emanating from the seed coat while in contact with water, and live growth of fibers to form 3D network. Scanning electron microscope (SEM) and transmission electron microscope (TEM) studies confirmed 3D network formation with fiber diameters ranging from 20 to 50 nm.

Switchable Hydrolase Based on Reversible Formation of Supramolecular Catalytic Site Using a Self-Assembling Peptide.

The reversible regulation of catalytic activity is a feature found in natural enzymes which is not commonly observed in artificial catalytic systems. Here, we fabricate an artificial hydrolase with pH-switchable activity, achieved by introducing a catalytic histidine residue at the terminus of a pH-responsive peptide. The peptide exhibits a conformational transition from random coil to ß-sheet by changing the pH from acidic to alkaline. The ß-sheet self-assembles to form long fibrils with the hydrophobic edge and histidine residues extending in an ordered array as the catalytic microenvironment, which shows significant esterase activity. Catalytic activity can be reversible switched by pH-induced assembly/disassembly of the fibrils into random coils. At higher concentrations, the peptide forms a hydrogel which is also catalytically active and maintains its reversible (de-)activation.

Transport of biomolecules to binding partners displayed on the surface of microbeads arrayed in traps in a microfluidic cell.

Arrays of probe molecules integrated into a microfluidic cell are utilized as analytical tools to screen the binding interactions of the displayed probes against a target molecule. These assay platforms are useful in enzyme or antibody discovery, clinical diagnostics, and biosensing, as their ultraminiaturized design allows for high sensitivity and reduced consumption of reagents and target. We study here a platform in which the probes are first grafted to microbeads which are then arrayed in the microfluidic cell by capture in a trapping course. We examine a course which consists of V-shaped, half-open enclosures, and study theoretically and experimentally target mass transfer to the surface probes. Target binding is a two step process of diffusion across streamlines which convect the target over the microbead surface, and kinetic conjugation to the surface probes. Finite element simulations are obtained to calculate the target surface concentration as a function of time. For slow convection, large diffusive gradients build around the microbead and the trap, decreasing the overall binding rate. For rapid convection, thin diffusion boundary layers develop along the microbead surface and within the trap, increasing the binding rate to the idealized limit of untrapped microbeads in a channel. Experiments are undertaken using the binding of a target, fluorescently labeled NeutrAvidin, to its binding partner biotin, on the microbead surface. With the simulations as a guide, we identify convective flow rates which minimize diffusion barriers so that the transport rate is only kinetically determined and measure the rate constant.

Mixture Effect on the Dilatation Rheology of Asphaltenes-Laden Interfaces.

Asphaltenes are a solubility class of crude oils comprising polyaromatic and heterocyclic molecules with different interfacial activities. The previously neglected effects of compositional mixture on dilatational rheology are discussed in the light of diffusional relaxation models. It is demonstrated that the reported deviations from the Lucassen-van den Tempel model for a single-component solution could largely originate from a distribution in adsorption coefficients within the asphaltenes class. This particularly applies to the peculiar gel point rheology previously ascribed to asphaltenes cross-linking at the interface. Furthermore, an extensive bibliographical review shows that asphaltenes dilatational rheology data always verify the main features of diffusional relaxation, including a decrease in modulus at high bulk concentrations and phase shift values always lower than 45°. Using diffusional relaxation concepts, the reanalysis of the most extensive dataset so far confirmed recently published studies, showing that asphaltenes exhibit a unique equation of state (EOS) irrespective of adsorption conditions. This EOS proves to be very similar for bitumen and petroleum asphaltenes. Finally, a numerical application of a binary diffusional model proved efficient to capture both dynamic interfacial tension and dilatational rheology, with the same parameters. It appears that a minority of asphaltenes (less than 10%) have a much stronger interfacial activity than the bulk of them, as previously demonstrated by fractionation. These results open up the need for a reinterpretation of the physical mechanisms of asphaltenes adsorption in terms of classical amphiphilic behavior, with a potential impact on emulsion breaking and enhanced oil recovery strategies.

Sacrificial amphiphiles: Eco-friendly chemical herders as oil spill mitigation chemicals.

Crude oil spills are a major threat to marine biota and the environment. When light crude oil spills on water, it forms a thin layer that is difficult to clean by any methods of oil spill response. Under these circumstances, a special type of amphiphile termed as "chemical herder" is sprayed onto the water surrounding the spilled oil. The amphiphile forms a monomolecular layer on the water surface, reducing the air-sea surface tension and causing the oil slick to retract into a thick mass that can be burnt in situ. The current best-known chemical herders are chemically stable and nonbiodegradable, and hence remain in the marine ecosystem for years. We architect an eco-friendly, sacrificial, and effective green herder derived from the plant-based small-molecule phytol, which is abundant in the marine environment, as an alternative to the current chemical herders. Phytol consists of a regularly branched chain of isoprene units that form the hydrophobe of the amphiphile; the chain is esterified to cationic groups to form the polar group. The ester linkage is proximal to an allyl bond in phytol, which facilitates the hydrolysis of the amphiphile after adsorption to the sea surface into the phytol hydrophobic tail, which along with the unhydrolyzed herder, remains on the surface to maintain herding action, and the cationic group, which dissolves into the water column. Eventual degradation of the phytol tail and dilution of the cation make these sacrificial amphiphiles eco-friendly. The herding behavior of phytol-based amphiphiles is evaluated as a function of time, temperature, and water salinity to examine their versatility under different conditions, ranging from ice-cold water to hot water. The green chemical herder retracted oil slicks by up to ~500, 700, and 2500% at 5°, 20°, and 35°C, respectively, during the first 10 min of the experiment, which is on a par with the current best chemical herders in practice.

Hydrodynamics of Particles at an Oil-Water Interface.

This study is a theoretical and experimental investigation of the hydrodynamics of the mutual approach of two floating spherical particles moving along an oil-water interface. An analytical expression is obtained for the (inertialess) Stokes drag for an isolated particle translating on a flat interface as a function of the immersion depth into the water phase for the case in which the viscosity of the oil is much larger than that of the water. An approximation for the viscous drag due to the mutual approach of identical spheres is formulated as the product of the isolated drag multiplied by the resistance of approaching spheres in an infinite medium. Experiments are undertaken on the capillary attraction of large, millimeter-sized Teflon spheres floating at the interface between a very viscous oil and water. With the use of image visualization and particle tracking, the separation distance as a function of time [[Formula: see text](t)] is measured along with the immersion depth and predicted by setting the capillary attraction force equal to the viscous drag resistance. The excellent agreement validates the approximating formula.

Adsorption of rationally designed "surf-tides" to a liquid-crystal interface.

The interfacial adsorption of proteins in surfactant laden systems occurs both in nature and industrial processing, yet much of the fundamental behavior behind these systems is still not well understood. We report the development of a system that monitors optical transitions of a liquid-crystalline/aqueous interface to examine the dynamics of adsorption of two rationally designed model peptide molecules. The two molecules synthesized in this study were both designed to become surface-active upon folding and contain the same net charge of +3, but one of the peptides, K-2.5, has its three charges separated by 2.5 amino acids as compared to K-6.0, which has its three charges separated by 6 amino acids. Our study examines the roles that surfactant adsorption, peptide charge distribution and secondary structure have on the relative adsorption dynamics of these two models peptides onto a fluid/fluid interface. Using the optical detection of molecular adsorption and image analysis of these events, we obtain quantitative information about the dynamics as a function of the charge spacing and initial peptide concentration. We show that both peptides initially follow a diffusion-limited adsorption model onto the interface. Additionally, our results suggest that the K-6.0 peptides demonstrate enhanced adsorption kinetics, where the enhanced rates are a consequence of the well-folded adsorbed state and spatial distribution on the surface. These findings provide further insights into the role that charge spacing has on secondary structure and subsequently the dynamics of adsorption, while developing a versatile system capable of extracting quantitative information from a simple inexpensive optical system.