Hydrothermal liquefaction of Galdieria sulphuraria grown on municipal wastewater.

Two strains of Galdieria sulphuraria algae, 5587.1 and SOOS, were grown on municipal wastewater to develop energy-positive treatment systems. Hydrothermal liquefaction (HTL) of 5-10 wt% algal biomass solids was conducted at 310-350 °C for 5-60 min to produce bio-crude oil. HTL product yields and energy recovery were compared to those from previous studies using G. sulphuraria grown on a modified Cyanidium medium. Total bio-crude oil yields were lower (11.2-23.0 wt%) and char yields were higher (22.6-36.4 wt%) for HTL of algae grown on actual wastewater compared with that grown on media (31.4 wt% and 4.8 wt%, respectively), indicating a potential limitation for using yields from media-based studies. High-resolution mass spectroscopy of bio-crude oil provides new insights into differences in composition based on growth media. Energy recovery in total bio-crude oil and char at 350 °C was 17-28% and 14-19%, respectively, for the 5587.1 strain, and 23-27% and 14-25%, respectively, for the SOOS strain.

Hydrothermal liquefaction of high- and low-lipid algae: Mass and energy balances.

Hydrothermal liquefaction (HTL) of high-lipid microalgae Nannochloropsis salina (N. salina) and low-lipid microalgae Galdieria sulphuraria (G. sulphuraria) were run under subcritical conditions (310-350 °C and 10-17 MPa) in a 1.8 L batch autoclave system. HTL mass and energy balances for both species were compared under different operating conditions to predict the optimum reaction conditions for new algae strains based on their feedstock composition. Bio-crude oils and chars were characterized by bomb calorimetry, elemental analysis, inductively coupled plasma optical emission spectrometry (ICP-OES), and thermogravimetric analysis (TGA). Under the optimized conditions, 59 wt% and 31 wt% bio-crude oil yields were obtained from HTL of N. salina and G. sulphuraria, while 85% and 59% of the feedstock energy were partitioned into N. salina-derived and G. sulphuraria-derived bio-crude oils, respectively. More favorable energy balances were related to shorter reaction times and higher algal solid contents.

Potential of biosorbent developed from fruit peel of Trewia nudiflora for removal of hexavalent chromium from synthetic and industrial effluent: Analyzing phytotoxicity in germinating Vigna seeds.

Chromium (VI) removal efficiency of a biosorbent prepared from fruit peel of Trewia nudiflora plant was studied. The effect of pH, sorbent dose, initial metal concentration and temperature was studied with synthetic Cr⁺6 solution in batch mode. About 278 mg/g of Cr⁺6 sorption was obtained at 293 K at an optimum pH of 2.0 and biosorbent dose of 0.75 g/L. Equilibrium sorption data with varying initial concentration of Cr⁺6 (22-248 mg/L) at three different temperatures (293-313 K) were analyzed by various isotherms. Biosorption kinetics and thermodynamics were described using standard model equations. Encouraging results were obtained by the application of the biosorptive treatment for removal of Cr⁺6 from wastewater collected from common effluent treatment plant of tannery industry. In addition, C⁺6r desorption behavior was studied on different systems. Biosorbent was characterized by FESEM, FT-IR and XRD, etc. Effect of the biosorptive treatement with respect to the phytotoxicity of Cr⁺6 was analyzed by studying the seed germination behavior and enzyme activity of a pulse seed (Vigna radiata L.). Different concentrations of Cr⁺6 solution in both synthetic medium, as well as, in tannery effluent was employed and the results were compared with that of biosorbent treated medium. The study showed that due to efficient removal of Cr⁺6 from aqueous phase, considerable enhancement of seed germination, as well as, increase in root length was obtained for the biosorbent treated solutions which were close to that of the control values. Significant decrease (P < 0.01) in POD activity was observed in seeds irrigated with biosorbent treated wastewater compared to untreated wastewater. The study showed that the novel biosorbent prepared might be utilized for abatement of heavy metal toxicity, i.e., Cr⁺6 from industrial effluent.