Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 4 de 4
Filtrar
Más filtros










Base de datos
Intervalo de año de publicación
1.
Appl Radiat Isot ; 204: 111120, 2024 Feb.
Artículo en Inglés | MEDLINE | ID: mdl-38029639

RESUMEN

Simulations of internal amplification processes in high purity germanium (HPGe) detectors for gamma radiation are presented. The Synopsys Sentaurus Technology Computer-Aided Design (TCAD) package was employed to study conditions favourable to charge multiplication within volume of the detector. The physics model was developed, and validated where possible against known results from existing literature. The model was then applied to a new detector and a systematic study of the measurable parameters influencing charge collection and electric field profile was performed. Evidence of the internal amplification in the developed HPGe detector model was demonstrated at 4 kV bias voltage with anode diameter below 100 µm, corresponding to 16 kV/cm electric field and when an additional dopant with concentrations >5×1010cm-3 under the anode implanted. These effects were also simulated and observed in silicon detectors, giving additional confidence in the validity of the findings for germanium, presented in this work.

2.
Ultramicroscopy ; 182: 44-53, 2017 11.
Artículo en Inglés | MEDLINE | ID: mdl-28654827

RESUMEN

In this paper we report quantitative measurements of the imaging performance for the current generation of hybrid pixel detector, Medipix3, used as a direct electron detector. We have measured the modulation transfer function and detective quantum efficiency at beam energies of 60 and 80keV. In single pixel mode, energy threshold values can be chosen to maximize either the modulation transfer function or the detective quantum efficiency, obtaining values near to, or exceeding those for a theoretical detector with square pixels. The Medipix3 charge summing mode delivers simultaneous, high values of both modulation transfer function and detective quantum efficiency. We have also characterized the detector response to single electron events and describe an empirical model that predicts the detector modulation transfer function and detective quantum efficiency based on energy threshold. Exemplifying our findings we demonstrate the Medipix3 imaging performance recording a fully exposed electron diffraction pattern at 24-bit depth together with images in single pixel and charge summing modes. Our findings highlight that for transmission electron microscopy performed at low energies (energies <100keV) thick hybrid pixel detectors provide an advantageous architecture for direct electron imaging.

3.
Appl Radiat Isot ; 125: 9-14, 2017 Jul.
Artículo en Inglés | MEDLINE | ID: mdl-28390998

RESUMEN

Current techniques for the measurement of radioactivity at various points during PET radiopharmaceutical production and R&D are based on the detection of the annihilation gamma rays from the radionuclide in the labelled compound. The detection systems to measure these gamma rays are usually variations of NaI or CsF scintillation based systems requiring costly and heavy lead shielding to reduce background noise. These detectors inherently suffer from low detection efficiency, high background noise and very poor linearity. They are also unable to provide any reasonably useful position information. A novel positron counting technique is proposed for the radioactivity assay during radiopharmaceutical manufacturing that overcomes these limitations. Detection of positrons instead of gammas offers an unprecedented level of position resolution of the radiation source (down to sub-mm) thanks to the nature of the positron interaction with matter. Counting capability instead of charge integration in the detector brings the sensitivity down to the statistical limits at the same time as offering very high dynamic range and linearity from zero to any arbitrarily high activity. This paper reports on a quantitative comparison between conventional detector systems and the proposed positron counting detector.

4.
Rev Sci Instrum ; 84(11): 113302, 2013 Nov.
Artículo en Inglés | MEDLINE | ID: mdl-24289391

RESUMEN

Compton side-scattering has been used to simultaneously downshift the energy of keV to MeV energy range photons while attenuating their flux to enable single-shot, spectrally resolved, measurements of high flux X-ray sources to be undertaken. To demonstrate the technique a 1 mm thick pixelated cadmium telluride detector has been used to measure spectra of Compton side-scattered radiation from a Cobalt-60 laboratory source and a high flux, high peak brilliance X-ray source of betatron radiation from a laser-plasma wakefield accelerator.

SELECCIÓN DE REFERENCIAS
DETALLE DE LA BÚSQUEDA
...