A novel 3D volumetric method for directly quantifying porosity and pore space morphology in flocculated suspended sediments.

Flocculated suspended sediments (flocs) are found in a variety of environments globally, and their transport and behavior bear substantial importance to several industries including fisheries, aquaculture, and shipping. Additionally, the modelling of their behavior is important for estuarine and coastal flood prediction and defence, and the process of flocculation occurs in other unrelated industries such as paper and chemical production. Floc porosity is conventionally assessed using inferential indirect or proxy data approaches. These methods underestimate floc porosity % by c. 30% and cannot measure the micro-scale complexity of these pore spaces and networks, rendering inputs to models sub-optimal. This study introduces a novel 3D porosity and pore space quantification protocol, that produces directly quantified porosity % and pore space data.•3D floc data from micro-CT scanning is segmented volumetrically•This segmented volume is quantified to extract porosity and several pore space parameters from the floc structure.

Quantification of 3-dimensional structure and properties of flocculated natural suspended sediment.

Natural sediment flocs are fragile and highly heterogeneous aggregates of biogenic and minerogenic material typically with high porosity and low density. In aquatic environments dominated by fine, cohesive or mixed sediments they can dominate suspended sediment flux. Consequently, monitoring and modelling the behaviour, transport and distribution of flocs is very important for many aquatic industries, maintenance of waterways and conservation and management of aquatic waterbodies. Mathematical models that predict the behaviour of flocs rely on the accurate assessments of the size, shape, density, porosity and fractal dimension of flocs. These inherently 3-dimensional (3D) characteristics are typically derived from 2-dimensional (2D) data, largely due to the challenges associated with sampling, capturing, imaging and quantifying these fragile aggregates. We have developed new volumetric microscopy techniques which can quantify 3D internal and external structures and characteristics of sediment flocs. Here, these techniques were applied to quantify the 3D size (volume), shape and fractal dimension of natural and artificial sediment flocs and compare them to standard 2D approaches. Our study demonstrates that 2D approaches are under-estimating shape complexity and over-estimating the size and mass settling flux of flocs by up to two orders of magnitude, and the discrepancy between 2D and 3D is most marked for natural, organic rich macroflocs. Our study has significant implications for estimations of sediment flux at local to global scales within in aquatic environments. These new data and approaches offer the potential to improve the current parameterisation of sediment transport models and to improve the accuracy of current field-monitoring techniques.

Metal pollutant pathways in cohesive coastal catchments: Influence of flocculation and biopolymers on partitioning and flux.

The impacts of the partitioning of potentially toxic metals (PTM) within the estuarine environment is highly complex, but is of key significance owing to increases in populations living within such sensitive environments. Although empirical data exist for the partitioning of metals between the dissolved and particulate phases, little is known regarding the impacts of extracellular polymeric substances (EPS) upon the flocculation of particles within such a dynamic system nor the resultant influence on the distribution of metals between the particulate and dissolved phases. This prevents regulators from fully understanding the fate and risks associated with metals in estuaries. This study provides data associated with the simulation of 3 settlings typical of the turbulent mixing found in estuaries and partitioning of copper, cadmium, nickel, arsenic, lead and zinc for 3 salinities (0, 15, 30 PSU) reflecting the full salinity range from freshwater to seawater. Experiments were completed with and without the presence of EPS, using kaolin as the mineral particulate. The results showed significant differences between salinity, PTMs and turbulence for the experiments with and without EPS present. Overall, salinity was the main factor controlling the PTM partitioning to sediment, however the flocculation process did impact on the PTM distribution and with the addition of EPS the impact was more pronounced. The data highlighted the importance of taking account of EPS within any estuarine sediment process modelling, for relying on simple partitioning with corrections for salinity would likely lead to significant bias.

Increase in CFC-11 emissions from eastern China based on atmospheric observations.

The recovery of the stratospheric ozone layer relies on the continued decline in the atmospheric concentrations of ozone-depleting gases such as chlorofluorocarbons1. The atmospheric concentration of trichlorofluoromethane (CFC-11), the second-most abundant chlorofluorocarbon, has declined substantially since the mid-1990s2. A recently reported slowdown in the decline of the atmospheric concentration of CFC-11 after 2012, however, suggests that global emissions have increased3,4. A concurrent increase in CFC-11 emissions from eastern Asia contributes to the global emission increase, but the location and magnitude of this regional source are unknown3. Here, using high-frequency atmospheric observations from Gosan, South Korea, and Hateruma, Japan, together with global monitoring data and atmospheric chemical transport model simulations, we investigate regional CFC-11 emissions from eastern Asia. We show that emissions from eastern mainland China are 7.0 ± 3.0 (±1 standard deviation) gigagrams per year higher in 2014-2017 than in 2008-2012, and that the increase in emissions arises primarily around the northeastern provinces of Shandong and Hebei. This increase accounts for a substantial fraction (at least 40 to 60 per cent) of the global rise in CFC-11 emissions. We find no evidence for a significant increase in CFC-11 emissions from any other eastern Asian countries or other regions of the world where there are available data for the detection of regional emissions. The attribution of any remaining fraction of the global CFC-11 emission rise to other regions is limited by the sparsity of long-term measurements of sufficient frequency near potentially emissive regions. Several considerations suggest that the increase in CFC-11 emissions from eastern mainland China is likely to be the result of new production and use, which is inconsistent with the Montreal Protocol agreement to phase out global chlorofluorocarbon production by 2010.

Continued Emissions of the Ozone-Depleting Substance Carbon Tetrachloride From Eastern Asia.

Carbon tetrachloride (CCl4) is an ozone-depleting substance, accounting for about 10% of the chlorine in the troposphere. Under the terms of the Montreal Protocol, its production for dispersive uses was banned from 2010. In this work we show that, despite the controls on production being introduced, CCl4 emissions from the eastern part of China did not decline between 2009 and 2016. This finding is in contrast to a recent bottom-up estimate, which predicted a significant decrease in emissions after the introduction of production controls. We find eastern Asian emissions of CCl4 to be 16 (9-24) Gg/year on average between 2009 and 2016, with the primary source regions being in eastern China. The spatial distribution of emissions that we derive suggests that the source distribution of CCl4 in China changed during the 8-year study period, indicating a new source or sources of emissions from China's Shandong province after 2012.

Measurements of δ13C in CH4 and using particle dispersion modeling to characterize sources of Arctic methane within an air mass.

A stratified air mass enriched in methane (CH4) was sampled at ~600 m to ~2000 m altitude, between the north coast of Norway and Svalbard as part of the Methane in the Arctic: Measurements and Modelling campaign on board the UK's BAe-146-301 Atmospheric Research Aircraft. The approach used here, which combines interpretation of multiple tracers with transport modeling, enables better understanding of the emission sources that contribute to the background mixing ratios of CH4 in the Arctic. Importantly, it allows constraints to be placed on the location and isotopic bulk signature of the emission source(s). Measurements of δ13C in CH4 in whole air samples taken while traversing the air mass identified that the source(s) had a strongly depleted bulk δ13C CH4 isotopic signature of -70 (±2.1)‰. Combined Numerical Atmospheric-dispersion Modeling Environment and inventory analysis indicates that the air mass was recently in the planetary boundary layer over northwest Russia and the Barents Sea, with the likely dominant source of methane being from wetlands in that region.

UK emissions of the greenhouse gas nitrous oxide.

Signatories of the Kyoto Protocol are obliged to submit annual accounts of their anthropogenic greenhouse gas emissions, which include nitrous oxide (N(2)O). Emissions from the sectors industry (3.8 Gg), energy (14.4 Gg), agriculture (86.8 Gg), wastewater (4.4 Gg), land use, land-use change and forestry (2.1 Gg) can be calculated by multiplying activity data (i.e. amount of fertilizer applied, animal numbers) with simple emission factors (Tier 1 approach), which are generally applied across wide geographical regions. The agricultural sector is the largest anthropogenic source of N(2)O in many countries and responsible for 75 per cent of UK N(2)O emissions. Microbial N(2)O production in nitrogen-fertilized soils (27.6 Gg), nitrogen-enriched waters (24.2 Gg) and manure storage systems (6.4 Gg) dominate agricultural emission budgets. For the agricultural sector, the Tier 1 emission factor approach is too simplistic to reflect local variations in climate, ecosystems and management, and is unable to take into account some of the mitigation strategies applied. This paper reviews deviations of observed emissions from those calculated using the simple emission factor approach for all anthropogenic sectors, briefly discusses the need to adopt specific emission factors that reflect regional variability in climate, soil type and management, and explains how bottom-up emission inventories can be verified by top-down modelling.

The impact of local surface changes in Borneo on atmospheric composition at wider spatial scales: coastal processes, land-use change and air quality.

We present results from the OP3 campaign in Sabah during 2008 that allow us to study the impact of local emission changes over Borneo on atmospheric composition at the regional and wider scale. OP3 constituent data provide an important constraint on model performance. Treatment of boundary layer processes is highlighted as an important area of model uncertainty. Model studies of land-use change confirm earlier work, indicating that further changes to intensive oil palm agriculture in South East Asia, and the tropics in general, could have important impacts on air quality, with the biggest factor being the concomitant changes in NO(x) emissions. With the model scenarios used here, local increases in ozone of around 50 per cent could occur. We also report measurements of short-lived brominated compounds around Sabah suggesting that oceanic (and, especially, coastal) emission sources dominate locally. The concentration of bromine in short-lived halocarbons measured at the surface during OP3 amounted to about 7 ppt, setting an upper limit on the amount of these species that can reach the lower stratosphere.

A review of sediment dynamics in the Severn Estuary: influence of flocculation.

This paper provides a review and critique of the distributions and characteristics of non-cohesive and cohesive sediments within the Severn Estuary, with particular reference to floc properties. The estuary is hyper-tidal and, consequently, highly turbid along most of its length and it generally has two turbidity maxima. In the upper reaches of the estuary, suspended particulate matter (SPM) concentrations can be in excess of 10 g l(-1) for river flows up to 50 m(3)s(-1), rising to over 50 g l(-1) during periods of lower river flow. The lower estuary turbidity maximum originates in the vicinity of Bridgwater Bay where SPM concentrations may vary between 0.1-200 g l(-1). The formation of fluid mud is coupled to the spring-neap cycle and strong vertical gradients in SPM concentrations produce turbulence damping and drag reduction effects, and hence impair the ability of the flow to transport sediments. Flocculation is an important mechanism for controlling the behaviour of fine sediments and mean settling velocities of flocs vary between 0.8-6 mm s(-1). A secondary consequence of flocculation is the formation of mud:sand mixtures in turbid suspensions. Improved understanding of the significance of flocculation processes is crucial as they may exert an influence on the mechanism by which adsorbed contaminants are transported in the system.

Crossed renal ectopia. Case report.

Crossed renal ectopia is a relatively rare anomaly with non-specific manifestations, sometimes diagnosed incidentally. Eight cases are reported, the etiology, diagnostic approach and management of the urological complications are discussed.

Modelling radiative transfer in the middle atmosphere

In the middle atmosphere, there is strong coupling between radiative dynamical and chemical processes. The emitted terrestrial radiation field and the absorbed solar radiation field are modifiel by the presence of clouds and gaseous constituents such as water vapour, carbon dioxide, ozone, nitrogen dioxide and methane, which exhibit intense and complex absorption in this region of the spectrum. (AU)