Computational Study of Abdominal Aortic Aneurysm Walls Accounting for Patient-Specific Non-Uniform Intraluminal Thrombus Thickness and Distinct Material Models: A Pre- and Post-Rupture Case.

An intraluminal thrombus (ILT) is present in the majority of abdominal aortic aneurysms, playing a crucial role in their growth and rupture. Although most computational studies do not include the ILT, in the present study, this is taken into account, laying out the whole simulation procedure, namely, from computed tomography scans to medical image segmentation, geometry reconstruction, mesh generation, biomaterial modeling, finite element analysis, and post-processing, all carried out in open software. By processing the tomography scans of a patient's aneurysm before and after rupture, digital twins are reconstructed assuming a uniform aortic wall thickness. The ILT and the aortic wall are assigned different biomaterial models; namely, the first is modeled as an isotropic linear elastic material, and the second is modeled as the Mooney-Rivlin hyperelastic material as well as the transversely isotropic hyperelastic Holzapfel-Gasser-Ogden nonlinear material. The implementation of the latter requires the designation of local Cartesian coordinate systems in the aortic wall, suitably oriented in space, for the proper orientation of the collagen fibers. The composite aneurysm geometries (ILT and aortic wall structures) are loaded with normal and hypertensive static intraluminal pressure. Based on the calculated stress and strain distributions, ILT seems to be protecting the aneurysm from a structural point of view, as the highest stresses appear in the thrombus-free areas of the aneurysmal wall.

Arterial Stiffness and Aortic Aneurysmal Disease - A Narrative Review.

It has been documented that large-artery stiffness is independently associated with increased cardiovascular risk and may potentially lead to heart and kidney failure and cerebrovascular disease. A systematic review of studies investigating changes in arterial stiffness in patients undergoing endovascular repair of aortic disease was conducted. In addition, a review of the available literature was performed, analyzing findings from studies using the cardio-ankle vascular index (CAVI) as a marker of arterial stiffness. Overall, 26 studies were included in the present analysis. Our research revealed a high heterogeneity of included studies regarding the techniques used to assess the aortic stiffness. Aortic stiffness was assessed by pulse wave velocity (PWV), elastic modulus (Ep), and augmentation index (AI). Currently a few studies exist investigating the role of CAVI in patients having an aortic aneurysm or undergoing endovascular aortic repair. The majority of studies showed that the treatment of an abdominal aortic aneurysm (AAA) either with open repair (OR) or endovascular aortic repair (EVAR) reduces aortic compliance significantly. Whether EVAR reconstruction might contribute a higher effect on arterial stiffness compared to OR needs further focused research. An increase of arterial stiffness was uniformly observed in studies investigating patients following thoracic endovascular aortic repair (TEVAR), and the effect was more pronounced in young patients. The effects of increased arterial stiffness after EVAR and TEVAR on the heart and the central hemodynamic, and an eventual effect on cardiac systolic function, need to be further investigated and evaluated in large studies and special groups of patients.

Design, Simulation and Multi-Objective Optimization of a Micro-Scale Gearbox for a Novel Rotary Peristaltic Pump.

Peristaltic pumps are widely used in biomedical applications to ensure the safe flow of sterile or medical fluids. They are commonly employed for drug injections, IV fluids, and blood separation (apheresis). These pumps operate through a progressive contraction or expansion along a flexible tube, enabling fluid flow. They are also utilized in industrial applications for sanitary fluid transport, corrosive fluid handling, and novel pharmacological delivery systems. This research provides valuable insights into the selection and optimal design of the powertrain stages for peristaltic pumps implemented in drug delivery systems. The focus of this paper lies in the simulation and optimization of the performance of a power transmission gearbox by examining the energy consumption, sound levels, reliability, and volume as output metrics. The components of the powertrain consist of a helical gear pair for the first stage, a bevel gear pair for the second one, and finally a planetary transmission. Through extensive simulations, the model exhibits promising results, achieving an efficiency of up to 90%. Furthermore, alternative configurations were investigated to optimize the overall performance of the powertrain. This process has been simulated by employing the KISSsoft/KISSsys software package. The findings of this investigation contribute to advancements in the field of biomedical engineering and hold significant potential for improving the efficiency, reliability, and performance of drug delivery mechanisms.

Mechanics of ascending aortic aneurysms based on a modulus of elasticity dependent on aneurysm diameter and pressure.

The mechanical stresses and strains are examined, in ascending thoracic aortic aneurysm (aTAA) models, in a patient-specific aTAA as well as in healthy thoracic aortic models, via Finite Element Analysis. The aneurysms are assumed spherical, 1.5 mm thick, with diameters between 47 mm and 80 mm, eccentrically positioned. The geometry and wall thickness distribution of the aorta along its length are based on open literature data for an average patient age of 66.25 years, accounting for the Body Surface Area (BSA) parameter. The vessel wall material is assumed isotropic and incompressible, with its Young's modulus varying with the aneurysm diameter and the applied intraluminal pressure (120 mmHg to 240 mmHg). In the aTAAs, peak stresses were found to increase nonlinearly with aneurysm diameter (for a given pressure) tending to reach a plateau, appearing at the proximal area of the aneurysm, whereas lower stresses were found at its distal part and even smaller at the aneurysm maximum diameter. Regarding the patient-specific aTAA model, the peak stresses appeared at the distal part of the aneurysm where a tear of the intima layer was detected during surgical intervention. Peak strains exhibited for each pressure a maximum at a certain aneurysm diameter beyond which they dropped so that essentially the vessel wall's distensibility was thus reduced. Examining more than 100 geometry cases and employing a failure stress criterion, the rupture diameter thresholds were estimated to be 65, 52.5, 50 and 47.5 mm for a pressure of 120, 160, 200 and 240 mmHg respectively.

Modeling and Computational Comparison of the Displacement Forces Exerted between the AFX Unibody Aortic Stent Graft and its Hybrid Combination with a Nitinol-based Proximal Aortic Cuff.

BACKGROUND: The bifurcated AFX (Endologix, Inc, Irvine, CA, USA) aortic stent-graft is the sole unibody endograft for the management of Abdominal Aortic Aneurysms (AAA). In order to improve the AFX central sealing and clinical efficacy in challenging cases, a replacement of the central chromium-cobaltium AFX extension with a Nitinol-based proximal aortic cuff has been suggested. Yet, comparative data regarding the hemodynamic performance of this design is missing. Aim of this study was to compare the displacement forces (DF) acting on the hybrid AFX-Endurant design, with the classic AFX and Endurant endografts, in angulated and non-angulated cases based on patient-specific Computational Fluid Dynamics (CFD) simulations. METHODS: 3D endograft models of 11 treated AAA cases were reconstructed from Computed Tomography Angiography (CTA) imaging data: 5 cases of AFX, 3 cases of the combination AFX-Endurant and 3 cases of the classic Endurant design. The DF on the main-body, the iliac limbs, and the entire stent-graft was calculated by processing the velocity and pressure fields generated by pulsatile CFD simulations. RESULTS: The range of total DF (acting on the whole endograft structure) in the AFX, hybrid AFX-Endurant and Endurant group was 2.5-5.2N, 2.0-5.9N and 1.9-2.9N respectively, with the maximum total DF being lower for Endurant. The DF on the main-body of the classic and hybrid AFX cases were higher than the right and left iliac limbs (2.5-4.9N vs. 0.6-5.3N and 0.7-3.6N respectively). Conversely, the DF on the main-body of the Endurant cases was comparable to the force exerted on the right and left limbs. When separating the cases with respect to their neck angulation, the DF on all endograft parts (main-body, limbs) and on the endograft as a whole were lower for the hybrid AFX-Endurant group compared to the classic AFX and Endurant groups, for cases with almost straight neck. CONCLUSION: The off-label use of the hybrid AFX-Endurant stent-graft does not seem superior to the conventional AFX or Endurant endografts in angulated cases but was associated with lower DF than AFX or Endurant in non-angulated cases. The clinical value and utility of these findings remain to be elucidated.

Comparison of Fluid Dynamics Variations Between Chimney and Fenestrated Endografts for Pararenal Aneurysms Repair: A Patient Specific Computational Study as Motivation for Clinical Decision-Making.

BACKGROUND-AIM: Limited data exist concerning the fluid dynamic changes induced by endovascular aortic repair with fenestrated and chimney graft modalities in pararenal aneurysms. We aimed to investigate and compare the wall shear stress (WSS) and flow dynamics for the branch vessels before and after endovascular aortic repair with fenestrated and chimney techniques. METHODS: Modeling was done for patient specific pararenal aortic aneurysms employing fenestrated and chimney grafts (Materialise Mimics 10.0) before and after the endovascular procedure, using computed tomography scans of patients. Surface and spatial grids were created using the ANSYS CFD meshing software 2019 R2. Assessment of blood flow, streamlines, and WSS before and after aneurysm repair was performed. RESULTS: The endovascular repair with chimney grafts leaded to a 43% to 53% reduction in perfusion in renal arteries. In fenestrated reconstruction, we observed a 15% reduced perfusion in both renal arteries. In both cases, we observed a decrease in the recirculation phenomena of the aorta after endovascular repair. Concerning the grafts of the renal arteries, we observed in both the transverse and longitudinal axes low WSS regions with simultaneous recirculation of the flow 1 cm distal to the ostium sites in both aortic graft models. High WSS regions appeared in the sites of ostium. CONCLUSIONS: We observed reduced renal perfusion in chimney grafts compared to fenestrated grafts, probably caused by the long and kinked characteristics of these devices.

Identification of regional/layer differences in failure properties and thickness as important biomechanical factors responsible for the initiation of aortic dissections.

Thoracic aortic dissections involving the ascending aorta represent one of the most dramatic and lethal emergencies in cardiovascular surgery. It is therefore critical to identify the mechanisms driving them and biomechanical analyses hold great clinical promise, since rupture/dissection occur when aortic wall strength is unable to withstand hemodynamic stresses. Although several studies have been done on the biomechanical properties of thoracic aortic aneurysms, few data are available about thoracic aortic dissections. Detailed mechanical tests with measurement of tissue thickness and failure properties were performed with a tensile-testing device on 445 standardized specimens, corresponding to 19 measurement sites per inner (intima with most of media)/outer layer (leftover media with adventitia); harvested from twelve patients undergoing emergent surgical repair for type A dissection. Our data suggested inherent differences in tissue properties between the origin of dissection and distal locations, i.e. thinner and stiffer inner layers that might render them more vulnerable to tearing despite their increased strength. The strength of tissue circumferentially was greater than that longitudinally, likely determining the direction of tear. The relative strengths of the inner: ∼{65,40}N/cm2 and outer layer: ∼{350,270}N/cm2 in the two principal directions of dissected tissue were differentiated from the intima: ∼{100,75}N/cm2, media: ∼{150,55}N/cm2, and adventitia: ∼{270,190}N/cm2 of non-dissected ascending aortic aneurysms (Sokolis et al., 2012), in favor of weaker inner and stronger outer layers, allowing an explanation as to why the presently-studied tissue suffered dissection, i.e. tear of the inner layers, and not rupture, i.e. full tearing across the entire wall thickness.

Elevated expression of mechanosensory polycystins in human carotid atherosclerotic plaques: association with p53 activation and disease severity.

Atherosclerotic plaque formation is associated with irregular distribution of wall shear stress (WSS) that modulates endothelial function and integrity. Polycystins (PC)-1/-2 constitute a flow-sensing protein complex in endothelial cells, able to respond to WSS and induce cell-proliferation changes leading to atherosclerosis. An endothelial cell-culture system of measurable WSS was established to detect alterations in PCs expression under conditions of low- and high-oscillatory shear stress in vitro. PCs expression and p53 activation as a regulator of cell proliferation were further evaluated in vivo and in 69 advanced human carotid atherosclerotic plaques (AAPs). Increased PC-1/PC-2 expression was observed at 30-60 min of low shear stress (LSS) in endothelial cells. Elevated PC-1 expression at LSS was followed by p53 potentiation. PCs immunoreactivity localizes in areas with macrophage infiltration and neovascularization. PC-1 mRNA and protein levels were significantly higher than PC-2 in stable fibroatherotic (V) and unstable/complicated (VI) AAPs. Elevated PC-1 immunostaining was detected in AAPs from patients with diabetes mellitus, dyslipidemia, hypertension and carotid stenosis, at both arteries (50%) or in one artery (90%). PCs seem to participate in plaque formation and progression. Since PC-1 upregulation coincides with p38 and p53 activation, a potential interplay of these molecules in atherosclerosis induction is posed.

Studying the flow dynamics in an aortic endograft with crossed-limbs.

PURPOSE: To evaluate the flow phenomena within an aortic endograft with crossed-limbs, comparing to an endograft with the ordinary limb bifurcation. METHODS: An endograft model with crossed-limbs was computationally reconstructed based on Computed Tomography patient-specific data, using commercially available software. Accordingly, its analogue model was reconstructed in the ordinary fashion (ordinary bifurcation). Computational fluid dynamics analysis was performed to determine and compare the flow fields, velocity profiles, pressure and shear stress distribution throughout the different parts of both endograft configurations, in different phases of the cardiac cycle. RESULTS: The flow patterns between the "Ballerina" and the classic endograft were similar, with flow disturbance near the inlet zone at late diastole and smooth flow patterns during the systolic phase. Both configurations presented similar pressure distribution patterns throughout the cardiac cycle. The highest and lowest pressures were demonstrated in the inlet-main body area and the iliac limbs, respectively. Marked differences were observed in the velocity profiles of the proximal limb segments between the two configurations, mostly in the peak- and end-systolic phase. The regions of lower velocities correlated well to low shear values. Differences in the shear stress distribution were noted between the two configurations in the systolic and, predominantly, in the diastolic phase. CONCLUSIONS: There are differences in the velocity profiles and shear distribution between the limbs of the two endograft configurations. The pathophysiologic implication of our findings and their possible association with clinical events, such as thrombus apposition, deserves further investigation.

Geometric factors affecting the displacement forces in an aortic endograft with crossed limbs: a computational study.

PURPOSE: To compare the hemodynamic behavior between an aortic endograft model in the "crossed-limbs" configuration and the customary bifurcated deployment position under the influence of several geometric factors. METHODS: A crossed-limbs graft and its analogue model with uncrossed limbs were computationally reconstructed. The displacement forces acting over the entire endograft and at the bifurcation and iliac sites separately were calculated using a fluid structure interaction simulation under a range of specific geometric characteristics, namely, the lateral and anteroposterior (AP) neck angulation, the iliac bifurcation angulation, and the endograft curvature. RESULTS: The variations of lateral neck angulation caused a constantly higher total displacement force for the crossed-limbs graft, whereas the force at the bifurcation of the two configurations differed only within a narrow range of 30° to 50°. On the contrary, the displacement force at the iliac site was higher in the crossed-limbs configuration only with lateral neck angulation >50°, reaching its highest value at 70°. The variations of AP neck angulation also caused higher total displacement forces in the crossed-limbs graft. Increasing AP neck angulation values caused generally lower forces at the crossed iliac limbs and higher at its bifurcation, respectively, compared to the uncrossed limbs model. Similarly, the influence of high iliac bifurcation angulation and endograft curvature was associated with slightly elevated forces over the entire crossed-limbs graft and its bifurcation, whereas the opposite held true at the iliac site. CONCLUSION: Apart from minor differentiations due to geometric alterations, the customary bifurcated and crossed-limbs endografts present similar hemodynamic performance. Further clinical studies should be conducted to confirm the clinical applicability of these findings.

Modeling and computational analysis of the hemodynamic effects of crossing the limbs in an aortic endograft ("ballerina" position).

PURPOSE: To evaluate the displacement forces acting on an aortic endograft when the iliac limbs are crossed ("ballerina" position). METHODS: An endograft model was computationally reconstructed based on data from a patient whose infrarenal aortic aneurysm had an endovascular stent-graft implanted with the iliac limbs crossed. Computational fluid dynamics analysis determined the maximum displacement force on the endograft and separately on the bifurcation and iliac limbs. Its analogue model was reconstructed for comparison, assuming the neck, main body, and total length constant but considering the iliac limbs to be deployed in the usual bifurcated mode. Calculations were repeated after developing "idealized" models of both the bifurcated and crossed-limbs endografts with straight main bodies and no neck angulation or curved iliac segments. RESULTS: The vector of the total force was directed anterocaudal for both the typical bifurcated and the crossed-limbs configurations, with the forces in the latter slightly reduced and the vertical component accounting for most of the force in both configurations. Idealized crossed-limbs and bifurcated configurations differed only in the force on the iliac limbs, but this difference disappeared in the realistic models. CONCLUSION: Crossing of the iliac limbs can slightly affect the direction of the displacement forces. Although this configuration can exert larger forces on the limbs than in the bifurcated mode, this effect can be blunted by concomitant modifications in the geometry of the main body and other parts of the endograft, making its hemodynamic behavior resemble that of a typically positioned endograft.

Retrograde cardioplegia in CABG: is it really useful? The microcirculation and a capillary unit model.

Most surgeons, ourselves including, use retrograde cardioplegia in numerable operations in cardiac surgery. It is believed to be not only supplementary to antegrade, but also a unique alternative in special complicated cases. Regarding CABGs (coronary artery bypass grafts), many authors advocate its routine use together with antegrade, while others do not suggest it for standard practice. The existing disagreement on this special item is consequential to the different results among various protocols which have studied the effect of antegrade and retrograde perfusion. In these studies, fundamental variations in design, materials, and methods have resulted in an inability to compare results. Additionally, most of the published protocols studying cardioplegic arrest offer only a gross estimation of the microcirculatory perfusion, which is the basis of myocardial protection. Our present review is an attempt to elucidate the differences, explain the necessity of comparing retrograde cardioplegia alone with antegrade in CABGs for the reproduction of safe results, clarify the role of Thebesian veins and venovenous connections during retroperfusion, consider the critical anatomic differences between human hearts and those of animals which may result in serious study bias, and, finally, offer an explanation of what may really be going on in the microcirculation during antegrade and retrograde perfusion using a human capillary model.