RESUMEN
Pseudohexagonal Nb2O5 microcolumns spanning a size range of 50 to 610 nm were synthesized utilizing a cost-effective hydrothermal process (maintained at 180 °C for 30 min), followed by a subsequent calcination step at 500 °C for 3 h. Raman spectroscopy analysis unveiled three distinct reflection peaks at 220.04 cm-1, 602.01 cm-1, and 735.3 cm-1, indicative of the pseudohexagonal crystal lattice of Nb2O5. The HRTEM characterization confirmed the inter-lattice distance of 1.8 Å for the 110 plain and 3.17 Å for the 100 plain. The conductometry sensors were fabricated by drop-casting a dispersion of Nb2O5 microcolumns, in ethanol, on Pt electrodes. The fabricated sensors exhibited excellent selectivity in detecting C2H5OH (ΔG/G = 2.51 for 10 ppm C2H5OH) when compared to a variety of tested gases, including CO, CO2, NO2, H2, H2S, and C3H6O. The optimal operating temperature for this selective detection was determined to be 500 °C in a dry air environment. Moreover, the sensors demonstrated exceptional repeatability over the course of three testing cycles and displayed strong humidity resistance, even when exposed to 90% relative humidity. This excellent humidity resistance gas sensing property can be attributed to their nanoporous nature and elevated operating temperature.
RESUMEN
Titanium dioxide nanobelts were prepared via the alkali-hydrothermal method for application in chemical gas sensing. The formation process of TiO2-(B) nanobelts and their sensing properties were investigated in detail. FE-SEM was used to study the surface of the obtained structures. The TEM and XRD analyses show that the prepared TiO2 nanobelts are in the monoclinic phase. Furthermore, TEM shows the formation of porous-like morphology due to crystal defects in the TiO2-(B) nanobelts. The gas-sensing performance of the structure toward various concentrations of hydrogen, ethanol, acetone, nitrogen dioxide, and methane gases was studied at a temperature range between 100 and 500 °C. The fabricated sensor shows a high response toward acetone at a relatively low working temperature (150 °C), which is important for the development of low-power-consumption functional devices. Moreover, the obtained results indicate that monoclinic TiO2-B is a promising material for applications in chemo-resistive gas detectors.
RESUMEN
The synthesis of semiconductor nanocrystals with controlled doping is highly challenging, as often a significant part of the doping ions are found segregated at nanocrystals surface, even forming secondary phases, rather than incorporated in the core. We have investigated the dopant distribution dynamics under slight changes in the preparation procedure of nanocrystalline ZnO doped with manganese in low concentration by electron paramagnetic resonance spectroscopy, paying attention to the formation of transient secondary phases and their transformation into doped ZnO. The acidification of the starting solution in the co-precipitation synthesis from nitrate precursors lead to the decrease of the Mn2+ ions concentration in the core of the ZnO nanocrystals and their accumulation in minority phases, until ~79% of the Mn2+ ions were localized in a thin disordered shell of zinc hydroxynitrate (ZHN). A lower synthesis temperature resulted in polycrystalline Mn-doped ZHN. Under isochronal annealing up to 250 °C the bulk ZHN and the minority phases from the ZnO samples decomposed into ZnO. The Mn2+ ions distribution in the annealed nanocrystals was significantly altered, varying from a uniform volume distribution to a preferential localization in the outer layers of the nanocrystals. Our results provide a synthesis strategy for tailoring the dopant distribution in ZnO nanocrystals for applications ranging from surface based to ones involving core properties.