RESUMEN
Acute myeloid leukemias are a group of hematological malignancies characterized by a poor prognosis for survival. The discovery of oncogenic mutations in the FMS-like tyrosine kinase 3 (FLT3) gene has led to the development of tyrosine kinase inhibitors such as quizartinib. However, achieving complete remission in patients remains challenging because these new tyrosine kinase inhibitors (TKIs) are unable to completely eradicate all leukemic cells. Residual leukemic cells persist during quizartinib treatment, leading to the rapid emergence of drug-resistant leukemia. Given that mitochondrial oxidative metabolism promotes the survival of leukemic cells after exposure to multiple anticancer drugs, we characterized the metabolism of leukemic cells that persisted during quizartinib treatment and developed metabolic strategies to eradicate them. In our study, employing biochemical and metabolomics approaches, we confirmed that the survival of leukemic cells treated with FLT3 inhibitors critically depends on maintaining mitochondrial metabolism, specifically through glutamine oxidation. We uncovered a synergistic interaction between the FLT3 inhibitor quizartinib and L-asparaginase, operating through antimetabolic mechanisms. Utilizing various models of persistent leukemia, we demonstrated that leukemic cells resistant to quizartinib are susceptible to L-asparaginase. This combined therapeutic strategy shows promise in reducing the development of resistance to FLT3 inhibitors, offering a potential strategy to enhance treatment outcomes.
RESUMEN
Autologous fat grafting is the gold standard for treatment in patients with soft-tissue defects. However, the technique has a major limitation of unpredictable fat resorption due to insufficient blood supply in the initial phase after transplantation. To overcome this problem, we investigated the capability of a medical-grade poly L-lactide-co-poly ε-caprolactone (PLCL) scaffold to support adipose tissue and vascular regeneration. Deploying FDM 3D-printing, we produced a bioresorbable porous scaffold with interconnected pore networks to facilitate nutrient and oxygen diffusion. The compressive modulus of printed scaffold mimicked the mechanical properties of native adipose tissue. In vitro assays demonstrated that PLCL scaffolds or their degradation products supported differentiation of preadipocytes into viable mature adipocytes under appropriate induction. Interestingly, the chorioallantoic membrane assay revealed vascular invasion inside the porous scaffold, which represented a guiding structure for ingrowing blood vessels. Then, lipoaspirate-seeded scaffolds were transplanted subcutaneously into the dorsal region of immunocompetent rats (n = 16) for 1 or 2 months. The volume of adipose tissue was maintained inside the scaffold over time. Histomorphometric evaluation discovered small- and normal-sized perilipin+ adipocytes (no hypertrophy) classically organized into lobular structures inside the scaffold. Adipose tissue was surrounded by discrete layers of fibrous connective tissue associated with CD68+ macrophage patches around the scaffold filaments. Adipocyte viability, assessed via TUNEL staining, was sustained by the presence of a high number of CD31-positive vessels inside the scaffold, confirming the CAM results. Overall, our study provides proof that 3D-printed PLCL scaffolds can be used to improve fat graft volume preservation and vascularization, paving the way for new therapeutic options for soft-tissue defects.
RESUMEN
Currently, in the absence of BRAFV600 mutation, the management of advanced melanomas is based on immunotherapies, but only half of the patients are responders. RAF1 (also named CRAF) fusions occur in 1-2.1% of wild-type melanomas. Preclinical data suggest that the presence of RAF fusion may be sensitive to MEK inhibitors. We report the case of a patient with an advanced melanoma harboring an EFCC1-RAF1 fusion who showed a clinical benefit from and a partial response to a MEK inhibitor.
Asunto(s)
Melanoma , Neoplasias Cutáneas , Humanos , Melanoma/tratamiento farmacológico , Melanoma/genética , Melanoma/patología , Neoplasias Cutáneas/tratamiento farmacológico , Neoplasias Cutáneas/genética , Neoplasias Cutáneas/patología , Inhibidores de Proteínas Quinasas/farmacología , Inhibidores de Proteínas Quinasas/uso terapéutico , Mutación , Quinasas de Proteína Quinasa Activadas por Mitógenos , Proteínas Proto-Oncogénicas B-raf/genética , Proteínas Proto-Oncogénicas B-raf/uso terapéuticoRESUMEN
Use of a tissue-engineering chamber (TEC) for growth of fat flap is a promising approach for breast reconstruction. Here, we evaluated in a preclinical model the effects of radiation on adipose tissue growth either before or after 3D-printed bioresorbable TEC implantation. Methods: Twenty-eight female Wistar rats were distributed into three groups: TEC implantation as nonirradiated controls (G1), TEC insertion followed by irradiation 3 weeks later (G2), and irradiation 6 weeks before TEC insertion (G3). G2 and G3 received 33.3 Gy in nine sessions of 3.7 Gy. Growth of the fat flap was monitored via magnetic resonance imaging. At 6 months after implantation, fat flaps and TECs were harvested for analysis. Results: Irradiation did not alter the physicochemical features of poly(lactic-co-glycolic acid)-based TECs. Compared with G1, fat flap growth was significantly reduced by 1.6 times in irradiated G2 and G3 conditions. In G2 and G3, fat flaps consisted of mature viable adipocytes sustained by CD31+ vascular cells. However, 37% (3 of 8) of the G2 irradiated adipose tissues presented a disorganized architecture invaded by connective tissues with inflammatory CD68 + cells, and the presence of fibrosis was observed. Conclusions: Overall, this preclinical study does not reveal any major obstacle to the use of TEC in a radiotherapy context. Although irradiation reduces the growth of fat flap under the TEC by reducing adipogenesis and inducing inconsistent fibrosis, it does not impact flap survival and vascularization. These elements must be taken into account if radiotherapy is proposed before or after TEC-based breast reconstruction.
RESUMEN
Medication-related osteonecrosis of the jaw (MRONJ) is a complication of certain pharmacological treatments such as bisphosphonates, denosumab, and angiogenesis inhibitors. There are currently no guidelines on its management, particularly in advanced stages. The human amniotic membrane (hAM) has low immunogenicity and exerts anti-inflammatory, antifibrotic, antimicrobial, antiviral, and analgesic effects. It is a source of stem cells and growth factors promoting tissue regeneration. hAM acts as an anatomical barrier with suitable mechanical properties (permeability, stability, elasticity, flexibility, and resorbability) to prevent the proliferation of fibrous tissue and promote early neovascularization at the surgical site. In oral surgery, hAM stimulates healing and facilitates the proliferation and differentiation of epithelial cells in the oral mucosa and therefore its regeneration. We proposed using cryopreserved hAM to eight patients suffering from cancer (11 lesions) with stage 2-3 MRONJ on a compassionate use basis. A collagen sponge was added in some cases to facilitate hAM grafting. One or three hAMs were applied and one patient had a reapplication. Three patients had complete closure of the surgical site with proper epithelialization at 2 weeks, and two of them maintained it until the last follow-up. At 1 week after surgery, three patients had partial wound dehiscence with partial healing 3 months later and two patients had complete wound dehiscence. hAM reapplication led to complete healing. All patients remained asymptomatic with excellent immediate significant pain relief, no infections, and a truly positive impact on the patients' quality of life. No adverse events occurred. At 6 months of follow-up, 80% of lesions had complete or partial wound healing (30 and 50%, respectively), while 62.5% of patients were in stage 3. Radiological evaluations found that 85.7% of patients had stable bone lesions (n = 5) or new bone formation (n = 1). One patient had a worsening MRONJ but remained asymptomatic. One patient did not attend his follow-up radiological examination. For the first time, this prospective pilot study extensively illustrates both the handling and surgical application of hAM in MRONJ, its possible association with a collagen sponge scaffold, its outcome at the site, the application of multiple hAM patches at the same time, and its reapplication.
RESUMEN
Tumor cells evolve in a complex and heterogeneous environment composed of different cell types and an extracellular matrix. Current 2D culture methods are very limited in their ability to mimic the cancer cell environment. In recent years, various 3D models of cancer cells have been developed, notably in the form of spheroids/organoids, using scaffold or cancer-on-chip devices. However, these models have the disadvantage of not being able to precisely control the organization of multiple cell types in complex architecture and are sometimes not very reproducible in their production, and this is especially true for spheroids. Three-dimensional bioprinting can produce complex, multi-cellular, and reproducible constructs in which the matrix composition and rigidity can be adapted locally or globally to the tumor model studied. For these reasons, 3D bioprinting seems to be the technique of choice to mimic the tumor microenvironment in vivo as closely as possible. In this review, we discuss different 3D-bioprinting technologies, including bioinks and crosslinkers that can be used for in vitro cancer models and the techniques used to study cells grown in hydrogels; finally, we provide some applications of bioprinted cancer models.
Asunto(s)
Bioimpresión , Neoplasias , Bioimpresión/métodos , Humanos , Hidrogeles , Medicina de Precisión , Impresión Tridimensional , Ingeniería de Tejidos/métodos , Andamios del Tejido , Microambiente TumoralRESUMEN
Cellular senescence is implicated in a great number of diseases including cancer. Although alterations in mitochondrial metabolism were reported as senescence drivers, the underlying mechanisms remain elusive. We report the mechanism altering mitochondrial function and OXPHOS in stress-induced senescent fibroblasts. We demonstrate that TRPC3 protein, acting as a controller of mitochondrial Ca2+ load via negative regulation of IP3 receptor-mediated Ca2+ release, is down regulated in senescence regardless of the type of senescence inducer. This remodelling promotes cytosolic/mitochondrial Ca2+ oscillations and elevates mitochondrial Ca2+ load, mitochondrial oxygen consumption rate and oxidative phosphorylation. Re-expression of TRPC3 in senescent cells diminishes mitochondrial Ca2+ load and promotes escape from OIS-induced senescence. Cellular senescence evoked by TRPC3 downregulation in stromal cells displays a proinflammatory and tumour-promoting secretome that encourages cancer epithelial cell proliferation and tumour growth in vivo. Altogether, our results unravel the mechanism contributing to pro-tumour behaviour of senescent cells.
Asunto(s)
Carcinogénesis/patología , Neoplasias/patología , Canales Catiónicos TRPC/metabolismo , Calcio/metabolismo , Línea Celular Tumoral , Proliferación Celular , Senescencia Celular , Retículo Endoplásmico/metabolismo , Células HEK293 , Humanos , Receptores de Inositol 1,4,5-Trifosfato/metabolismo , Mitocondrias/metabolismo , Fosforilación Oxidativa , Cultivo Primario de CélulasRESUMEN
OBJECTIVE: Long-term treatment with tyrosine kinase inhibitors (TKI) represents an effective cure for chronic myeloid leukemia (CML) patients and discontinuation of TKI therapy is now proposed to patient with deep molecular responses. However, evidence demonstrating that TKI are unable to fully eradicate dormant leukemic stem cells (LSC) indicate that new therapeutic strategies are needed to control LSC and to prevent relapse. In this study we investigated the metabolic pathways responsible for CML surviving to imatinib exposure and its potential therapeutic utility to improve the efficacy of TKI against stem-like CML cells. METHODS: Using complementary cell-based techniques, metabolism was characterized in a large panel of BCR-ABL+ cell lines as well as primary CD34+ stem-like cells from CML patients exposed to TKI and L-Asparaginases. Colony forming cell (CFC) assay and flow cytometry were used to identify CML progenitor and stem like-cells. Preclinical models of leukemia dormancy were used to test the effect of treatments. RESULTS: Although TKI suppressed glycolysis, compensatory glutamine-dependent mitochondrial oxidation supported ATP synthesis and CML cell survival. Glutamine metabolism was inhibited by L-asparaginases such as Kidrolase or Erwinase without inducing predominant CML cell death. However, clinically relevant concentrations of TKI render CML cells susceptible to Kidrolase. The combination of TKI with Lasparaginase reactivates the intinsic apoptotic pathway leading to efficient CML cell death. CONCLUSION: Targeting glutamine metabolism with the FDA-approved drug, Kidrolase in combination with TKI that suppress glycolysis represents an effective and widely applicable therapeutic strategy for eradicating stem-like CML cells.
Asunto(s)
Mesilato de Imatinib/farmacología , Leucemia Mielógena Crónica BCR-ABL Positiva/tratamiento farmacológico , Células Madre Neoplásicas/metabolismo , Animales , Apoptosis/efectos de los fármacos , Asparaginasa/metabolismo , Asparaginasa/farmacología , Asparagina/antagonistas & inhibidores , Asparagina/metabolismo , Línea Celular Tumoral , Proliferación Celular/efectos de los fármacos , Resistencia a Antineoplásicos/efectos de los fármacos , Humanos , Mesilato de Imatinib/metabolismo , Leucemia Mielógena Crónica BCR-ABL Positiva/metabolismo , Ratones , Células Madre Neoplásicas/efectos de los fármacos , Inhibidores de Proteínas Quinasas/farmacología , Proteínas Tirosina Quinasas/antagonistas & inhibidores , Proteínas Tirosina Quinasas/metabolismoRESUMEN
SMIP004-7 is a small molecule inhibitor of mitochondrial respiration with selective in vivo anti-cancer activity through an as-yet unknown molecular target. We demonstrate here that SMIP004-7 targets drug-resistant cancer cells with stem-like features by inhibiting mitochondrial respiration complex I (NADH:ubiquinone oxidoreductase, complex I [CI]). Instead of affecting the quinone-binding site targeted by most CI inhibitors, SMIP004-7 and its cytochrome P450-dependent activated metabolite(s) have an uncompetitive mechanism of inhibition involving a distinct N-terminal region of catalytic subunit NDUFS2 that leads to rapid disassembly of CI. SMIP004-7 and an improved chemical analog selectively engage NDUFS2 in vivo to inhibit the growth of triple-negative breast cancer transplants, a response mediated at least in part by boosting CD4+ and CD8+ T cell-mediated immune surveillance. Thus, SMIP004-7 defines an emerging class of ubiquinone uncompetitive CI inhibitors for cell autonomous and microenvironmental metabolic targeting of mitochondrial respiration in cancer.
Asunto(s)
Neoplasias , Ubiquinona , Complejo I de Transporte de Electrón/metabolismo , Mitocondrias/metabolismo , Neoplasias/metabolismo , Ubiquinona/metabolismo , Ubiquinona/farmacologíaRESUMEN
Resistant acute myeloid leukemia (AML) exhibits mitochondrial energy metabolism changes compared to newly diagnosed AML. This phenotype is often observed by evaluating the mitochondrial oxygen consumption of blasts, but most of the oximetry protocols were established from leukemia cell lines without validation on primary leukemia cells. Moreover, the cultures and storage conditions of blasts freshly extracted from patient blood or bone marrow cause stress, which must be evaluated before determining oxidative phosphorylation (OXPHOS). Herein, we evaluated different conditions to measure the oxygen consumption of blasts using extracellular flow analyzers. We first determined the minimum number of blasts required to measure OXPHOS. Next, we compared the OXPHOS of blasts cultured for 3 h and 18 h after collection and found that to maintain metabolic organization for 18 h, cytokine supplementation is necessary. Cytokines are also needed when measuring OXPHOS in cryopreserved, thawed and recultured blasts. Next, the concentrations of respiratory chain inhibitors and uncoupler FCCP were established. We found that the FCCP concentration required to reach the maximal respiration of blasts varied depending on the patient sample analyzed. These protocols provided can be used in future clinical studies to evaluate OXPHOS as a biomarker and assess the efficacy of treatments targeting mitochondria.
RESUMEN
Due to its intrinsic properties, there has been growing interest in human amniotic membrane (hAM) in recent years particularly for the treatment of ocular surface disorders and for wound healing. Herein, we investigate the potential use of hAM and amnion-chorion membrane (ACM) in oral surgery. Based on our analysis of the literature, it appears that their applications are very poorly defined. There are two options: implantation or use as a cover material graft. The oral cavity is submitted to various mechanical and biological stimulations that impair membrane stability and maintenance. Thus, some devices have been combined with the graft to secure its positioning and protect it in this location. This current opinion paper addresses in detail suitable procedures for hAM and ACM utilization in soft and hard tissue reconstruction in the oral cavity. We address their implantation and/or use as a covering, storage format, application side, size and number, multilayer use or folding, suture or use of additional protective covers, re-application and resorption/fate. We gathered evidence on pre- and post-surgical care and evaluation tools. Finally, we integrated ophthalmological and wound healing practices into the collected information. This review aims to help practitioners and researchers better understand the application of hAM and ACM in the oral cavity, a place less easily accessible than ocular or cutaneous surfaces. Additionally, it could be a useful reference in the generation of new ideas for the development of innovative protective covering, suturing or handling devices in this specific indication. Finally, this overview could be considered as a position paper to guide investigators to fulfill all the identified criteria in the future.
RESUMEN
Although bioabsorbable polymers have garnered increasing attention because of their potential in tissue engineering applications, to our knowledge there are only a few bioabsorbable 3D printed medical devices on the market thus far. In this study, we assessed the processability of medical grade Poly(lactic-co-glycolic) Acid (PLGA)85:15 via two additive manufacturing technologies: Fused Filament Fabrication (FFF) and Direct Pellet Printing (DPP) to highlight the least destructive technology towards PLGA. To quantify PLGA degradation, its molecular weight (gel permeation chromatography (GPC)) as well as its thermal properties (differential scanning calorimetry (DSC)) were evaluated at each processing step, including sterilization with conventional methods (ethylene oxide, gamma, and beta irradiation). Results show that 3D printing of PLGA on a DPP printer significantly decreased the number-average molecular weight (Mn) to the greatest extent (26% Mn loss, p < 0.0001) as it applies a longer residence time and higher shear stress compared to classic FFF (19% Mn loss, p < 0.0001). Among all sterilization methods tested, ethylene oxide seems to be the most appropriate, as it leads to no significant changes in PLGA properties. After sterilization, all samples were considered to be non-toxic, as cell viability was above 70% compared to the control, indicating that this manufacturing route could be used for the development of bioabsorbable medical devices. Based on our observations, we recommend using FFF printing and ethylene oxide sterilization to produce PLGA medical devices.
RESUMEN
Background The COVID-19 pandemic has altered organ and tissue donations as well as transplantation practices. SARS-CoV-2 serological tests could help in the selection of donors. We assessed COVID-19 seroprevalence in a population of tissue donors, at the onset of the outbreak in France, before systematic screening of donors for SARS-CoV-2 RNA. Methods 235 tissue donors at the Lille Tissue Bank between November 1, 2019 and March 16, 2020 were included. Archived serum samples were tested for SARS-CoV-2 antibodies using two FDA-approved kits. Results Most donors were at higher risks for severe COVID-19 illness including age over 65 years (142/235) and/or presence of co-morbidities (141/235). According to the COVID-19 risk assessment of transmission, 183 out of 235 tissue donors presented with a low risk level and 52 donors with an intermediate risk level of donor derived infection. Four out of the 235 (1.7%) tested specimens were positive for anti-SARS-CoV-2 antibodies: 2 donors with anti-N protein IgG and 2 other donors with anti-S protein total Ig. None of them had both type of antibodies. Conclusion Regarding the seroprevalence among tissue donors, we concluded that the transmission probability to recipient via tissue products was very low at the beginning of the outbreak.
Asunto(s)
Anticuerpos Antivirales/inmunología , COVID-19/epidemiología , COVID-19/inmunología , Control de Enfermedades Transmisibles , SARS-CoV-2/inmunología , Estudios Seroepidemiológicos , Donantes de Tejidos , Anciano , Femenino , Francia/epidemiología , Humanos , Masculino , Pandemias , Estudios RetrospectivosRESUMEN
Mitochondrial dysfunctions are implicated in several pathologies, such as metabolic, cardiovascular, respiratory, and neurological diseases, as well as in cancer and aging. These metabolic alterations are usually assessed in human or murine samples by mitochondrial respiratory chain enzymatic assays, by measuring the oxygen consumption of intact mitochondria isolated from tissues, or from cells obtained after physical or enzymatic disruption of the tissues. However, these methodologies do not maintain tissue multicellular organization and cell-cell interactions, known to influence mitochondrial metabolism. Here, we develop an optimal model to measure mitochondrial oxygen consumption in heart and lung tissue samples using the XF24 Extracellular Flux Analyzer (Seahorse) and discuss the advantages and limitations of this technological approach. Our results demonstrate that tissue organization, as well as mitochondrial ultrastructure and respiratory function, are preserved in heart and lung tissues freshly processed or after overnight conservation at 4 °C. Using this method, we confirmed the repeatedly reported obesity-associated mitochondrial dysfunction in the heart and extended it to the lungs. We set up and validated a new strategy to optimally assess mitochondrial function in murine tissues. As such, this method is of great potential interest for monitoring mitochondrial function in cohort samples.
Asunto(s)
Consumo de Oxígeno/fisiología , Envejecimiento/fisiología , Animales , Comunicación Celular/fisiología , Línea Celular , Línea Celular Tumoral , Respiración de la Célula/fisiología , Metabolismo Energético/fisiología , Corazón/fisiología , Humanos , Pulmón/fisiología , Masculino , Ratones , Ratones Endogámicos C57BL , Mitocondrias/fisiología , Membranas Mitocondriales/fisiología , Ratas , Pruebas de Función Respiratoria/métodosRESUMEN
BACKGROUND: Microbial contamination of human skin allografts is a frequent cause of allograft discard. Our purpose was to evaluate the discard rate of skin bank contaminated allografts and specific procedures used to reduce allograft contamination without affecting safety. METHODS: We conducted at the Lille Tissue Bank a retrospective study of all deceased donors (n = 104) harvested from January 2018 to December 2018. Skin procurement was split into 3 zones: the back of the body and the two legs that were processed separately. It represented 433 cryopreserved skin allograft pouches of approximatively 500 cm² each. Donors were almost equally split between brain-dead (53%, 55/104) and cadaveric (47%, 49/104) donors. RESULTS: Out of all donors, 42 (40.5%) had at least one sampling zone with a positive microbiological test resulting in 106 (24%) contaminated skin pouches. The contamination rate did not vary according to the harvested zone or type of donor. Traumatic deaths showed significantly less contamination rates than other death types (p < 0.05). Contamination rate decreased with time spent in the antibiotic solution. The risk of having contaminated allografts was five-fold higher when the skin spent less than 96 h in the antibiotic cocktail (p < 0.05). According to our validation protocol, most donors (32/42, 76%) had skin allografts contaminated with bacteria (mainly Staphylococcus spp) compatible with clinical use. No recipient infection was recorded as a result of skin graft contaminated with saprophytic or non-pathogenic germs. By harvesting 3 separate zones per donor, the total surface area for clinical use increased by 53% for contaminated donors. Overall, the proportion of contamination-related discarded allografts was 3.2% (14/433 of pouches). CONCLUSION: Few simple pragmatic measures (including skin incubation in the antibiotic bath for at least 96 h at 4 °C, splitting the skin harvesting areas to minimize the risk of cross-infection and clinical use of allografts contaminated with saprophytic and non-pathogenic germs) can reduce the discard rate of contaminated allografts without affecting clinical safety.
Asunto(s)
Quemaduras , Aloinjertos , Antibacterianos , Humanos , Estudios Retrospectivos , Trasplante HomólogoRESUMEN
Metabolic reprogramming is crucial to respond to cancer cell requirements during tumor development. In the last decade, metabolic alterations have been shown to modulate cancer cells' sensitivity to chemotherapeutic agents including conventional and targeted therapies. Recently, it became apparent that changes in lipid metabolism represent important mediators of resistance to anticancer agents. In this review, we highlight changes in lipid metabolism associated with therapy resistance, their significance and how dysregulated lipid metabolism could be exploited to overcome anticancer drug resistance.
RESUMEN
Mitochondrial metabolism must constantly adapt to stress conditions in order to maintain bioenergetic levels related to cellular functions. This absence of proper adaptation can be seen in a wide array of conditions, including cancer. Metabolic adaptation calls on mitochondrial function and draws on the mitochondrial reserve to meet increasing needs. Among mitochondrial respiratory parameters, the spare respiratory capacity (SRC) represents a particularly robust functional parameter to evaluate mitochondrial reserve. We provide an overview of potential SRC mechanisms and regulation with a focus on its particular significance in cancer cells.
Asunto(s)
Mitocondrias/metabolismo , Neoplasias/metabolismo , Animales , Respiración de la Célula , Humanos , Consumo de OxígenoRESUMEN
Tissue engineering chambers (TECs) bring great hope in regenerative medicine as they allow the growth of adipose tissue for soft tissue reconstruction. To date, a wide range of TEC prototypes are available with different conceptions and volumes. Here, we addressed the influence of TEC design on fat flap growth in vivo as well as the possibility of using bioresorbable polymers for optimum TEC conception. In rats, adipose tissue growth is quicker under perforated TEC printed in polylactic acid than non-perforated ones (growth difference 3 to 5 times greater within 90 days). Histological analysis reveals the presence of viable adipocytes under a moderate (less than 15% of the flap volume) fibrous capsule infiltrated with CD68+ inflammatory cells. CD31-positive vascular cells are more abundant at the peripheral zone than in the central part of the fat flap. Cells in the TEC exhibit a specific metabolic profile of functional adipocytes identified by 1H-NMR. Regardless of the percentage of TEC porosity, the presence of a flat base allowed the growth of a larger fat volume (p < 0.05) as evidenced by MRI images. In pigs, bioresorbable TEC in poly[1,4-dioxane-2,5-dione] (polyglycolic acid) PURASORB PGS allows fat flap growth up to 75 000 mm3 at day 90, (corresponding to more than a 140% volume increase) while at the same time the TEC is largely resorbed. No systemic inflammatory response was observed. Histologically, the expansion of adipose tissue resulted mainly from an increase in the number of adipocytes rather than cell hypertrophy. Adipose tissue is surrounded by perfused blood vessels and encased in a thin fibrous connective tissue containing patches of CD163+ inflammatory cells. Our large preclinical evaluation defined the appropriate design for 3D-printable bioresorbable TECs and thus opens perspectives for further clinical applications.
Asunto(s)
Implantes Absorbibles , Tejido Adiposo/fisiología , Materiales Biocompatibles , Impresión Tridimensional , Ingeniería de Tejidos , Fenómenos Químicos , Ácido Poliglicólico , Análisis Espectral , Colgajos Quirúrgicos , Técnicas de Cultivo de Tejidos , Ingeniería de Tejidos/métodosRESUMEN
The use of split-thickness skin autografts (STSA) with dermal substitutes is the gold standard treatment for third-degree burn patients. In this article, we tested whether cryopreserved amniotic membranes could be beneficial to the current treatments for full-thickness burns. Swines were subjected to standardised full-thickness burn injuries, and then were randomly assigned to treatments: (a) STSA alone; (b) STSA associated with the dermal substitute, Matriderm; (c) STSA plus human amniotic membrane (HAM); and (d) STSA associated with Matriderm plus HAM. Clinical and histological assessments were performed over time. We also reported the clinical use of HAM in one patient. The addition of HAM to classic treatments reduced scar contraction. In the presence of HAM, skin wound healing displayed high elasticity and histological examination showed a dense network of long elastic fibres. The presence of HAM increased dermal neovascularization, but no effect was observed on the recruitment of inflammatory cells to the wound. Moreover, the use of HAM with classical treatments in one human patient revealed a clear benefit in terms of elasticity. These results give initial evidence to consider the clinical application of HAM to avoid post-burn contractures and therefore facilitate functional recovery after deep burn injury.