Upgraded imaging capabilities at the BAMline (BESSY II).

The BAMline at the BESSY II synchrotron X-ray source has enabled research for more than 20 years in widely spread research fields such as materials science, biology, cultural heritage and medicine. As a nondestructive characterization method, synchrotron X-ray imaging, especially tomography, plays a particularly important role in structural characterization. A recent upgrade of key equipment of the BAMline widens its imaging capabilities: shorter scan acquisition times are now possible, in situ and operando studies can now be routinely performed, and different energy spectra can easily be set up. In fact, the upgraded double-multilayer monochromator brings full flexibility by yielding different energy spectra to optimize flux and energy resolution as desired. The upgraded detector (based on an sCMOS camera) also allows exploiting the higher flux with reduced readout times. Furthermore, an installed slip ring allows the sample stage to continuously rotate. The latter feature enables tomographic observation of processes occurring in the time scale of a few seconds.

Tensorial neutron tomography of three-dimensional magnetic vector fields in bulk materials.

Knowing the distribution of a magnetic field in bulk materials is important for understanding basic phenomena and developing functional magnetic materials. Microscopic imaging techniques employing X-rays, light, electrons, or scanning probe methods have been used to quantify magnetic fields within planar thin magnetic films in 2D or magnetic vector fields within comparable thin volumes in 3D. Some years ago, neutron imaging has been demonstrated to be a unique tool to detect magnetic fields and magnetic domain structures within bulk materials. Here, we show how arbitrary magnetic vector fields within bulk materials can be visualized and quantified in 3D using a set of nine spin-polarized neutron imaging measurements and a novel tensorial multiplicative algebraic reconstruction technique (TMART). We first verify the method by measuring the known magnetic field of an electric coil and then investigate the unknown trapped magnetic flux within the type-I superconductor lead.

Analysis of the 3D microstructure of experimental cathode films for lithium-ion batteries under increasing compaction.

It is well known that the microstructure of electrodes in lithium-ion batteries has an immense impact on their overall performance. The compaction load during the calendering process mainly determines the resulting morphology of the electrode. Therefore, NCM-based cathode films from uncompacted (0 MPa) to most highly compacted (1000 MPa) were manufactured, which corresponds to global porosities ranging from about 50% to 18%. All samples have been imaged using synchrotron tomography. These image data allow an extensive analysis of the 3D cathode microstructure with respect to increasing compaction. In addition, the numerous microstructural changes can be quantified using several characteristics describing the morphology of cathode samples. Three characteristics, namely global porosity, global volume fraction of active material and mean cathode thickness, are compared to experimental results. In addition, the microstructural analysis by means of 3D image data and image processing techniques allows the investigation of characteristics which are hard or impossible to ascertain by experiments, for example the continuous pore size distribution and the sphericity distribution of NCM-particles. Finally, the dependency of microstructural characteristics on compaction load is described by the help of parametric probability distributions. This approach can be used, for example, to predict the distribution of a certain characteristic for an 'unknown' compaction load, which is a valuable information with regard to the optimization and development process of NCM-cathodes in lithium-ion batteries. LAY DESCRIPTION: It is well known that the microstructure of electrodes in lithium-ion batteries has an immense impact on their overall performance. The manufacturing of the batteries includes the so-called calendering, where the electrodes are compressed with a certain pressure, which is called compaction load. This process step mainly determines the resulting morphology of the electrode and thus the properties of the battery. Therefore, eight cathodes with different compaction loads were manufactured and imaged by synchrotron tomography, which leads to 3D images containing detailed information about the inner structure of the cathode. This image data allows an extensive analysis of the 3D cathode microstructure with respect to increasing compaction. In order to quantify the microstructural changes we use several characteristics describing diverse properties of the morphology. Furthermore, the 3D image data can be used for the computation of characteristics which can not be determined by experiments. Therefore, 3D image data allows us to understand how the microstructure of cathodes is influenced by the compaction load. Finally, we are able to predict the distribution of a certain characteristic for arbitrary compaction loads. This information is valuable with regard to the development of improved lithium-ion batteries.