A Geometric Morphometrics Approach to the Study of Natural Variations and Hybrid Detection in Populations of Alnus incana (L.) Moench and Alnus rohlenae Vít, Douda and Mandák.

Landmark-based geometric morphometrics (GM) was used to examine, for the first time, spontaneous hybridization between Alnus incana (L.) Moench and Alnus rohlenae Vít, Douda and Mandák, and to assess inter- and intrapopulation variability in leaf shape, leaf size and venation in natural populations in Serbia (Western Balkans). Two geographically distant (30 km) and two close (1.2 km) populations were selected to examine hybridization. The variability in leaf shapes was assessed by canonical variate analysis and linear discriminant analysis performed on the symmetric component of variation. Covariation between the symmetric component of shape variation and the number of pairs of secondary leaf veins was investigated with partial least squares analysis. Static allometry was examined for the first time in the genus Alnus Mill. A higher proportion of A. incana leaves was classified as A. rohlenae in geographically close populations, which is in accordance with the hypothesis about spontaneous hybridization. No single leaf of A. rohlenae was classified as A. incana, indicating that putative hybrids can only be found in grey alder populations. This study demonstrates that GM is a powerful tool for species delimitation and hybrid detection in the genus Alnus and it can be used for preliminary screening in hybrid zones.

Tree species flammability based on plant traits: A synthesis.

The occurrence of large and recurring forest fires has long been associated with fire-prone environments, but this perception has been shifted rapidly in recent decades as Earths' landscapes have become increasingly threatened by severe and unpredictable fires as a result of climate changes. In this regard, the flammability of trees is a topic of great interest for ecology, management, and the development of sustainable restoration and rehabilitation plans. Tree species differ in regard to flammability, and many plant functional traits contribute to flammability at species, community and vegetation level. The relationship between plant traits and flammability at species level is important for a broader understanding of the vegetation-fire dynamic at the local and landscape scales. This review summarizes the current state of knowledge regarding the impact of individual plant traits of tree species on flammability components. By keywords-based searching of academic databases, 85 research papers were collected and analyzed. The literature synthesis shows: i) main issues addressed in studies on plant trait-based tree flammability, ii) general research output and biogeographic regions studied, iii) inventory of tree taxa investigated, iv) relationships between plant traits and flammability components, v) the most relevant plant traits that determine the flammability-related differences between species.

Gentiana asclepiadea L. from Two High Mountainous Habitats: Inter- and Intrapopulation Variability Based on Species' Phytochemistry.

Natural populations of Gentiana asclepiadea L., located at two mountainous sites, were HPLC-analyzed regarding the contents of six representative secondary metabolites. The contents of swertiamarin (SWM), gentiopicrin (GP), sweroside (SWZ), mangiferin (MGF), isoorientin (ISOOR), and isovitexin (ISOV) were determined in six populations (three per study site), and separately for aboveground and belowground plant parts. PCA showed a clear separation of four groups according to the contents of the analyzed secondary metabolites. Out of six analyzed compounds, five were present in all samples and only one (SWZ) was found in Golija populations (belowground parts) but not in Vlasina populations, and its presence can be indicative of the geolocation of populations. Clear separation of groups was mostly affected by the different contents of chemical compounds in plant parts (aboveground versus belowground) and by the differences related to population origin (higher content of SWM and GP in belowground parts of individuals from Vlasina populations and higher content of MGF and ISOOR of individuals from Golija populations). The results of this study contribute to the spatiochemical profiling of G. asclepiadea populations and a better understanding of inter- and intrapopulation variability of pharmacologically important compounds.

A Novel Fabrication Approach for Multifunctional Graphene-based Thin Film Nano-composite Membranes with Enhanced Desalination and Antibacterial Characteristics.

A practical fabrication technique is presented to tackle the trade-off between the water flux and salt rejection of thin film composite (TFC) reverse osmosis (RO) membranes through controlled creation of a thinner active selective polyamide (PA) layer. The new thin film nano-composite (TFNC) RO membranes were synthesized with multifunctional poly tannic acid-functionalized graphene oxide nanosheets (pTA-f-GO) embedded in its PA thin active layer, which is produced through interfacial polymerization. The incorporation of pTA-f-GOL into the fabricated TFNC membranes resulted in a thinner PA layer with lower roughness and higher hydrophilicity compared to pristine membrane. These properties enhanced both the membrane water flux (improved by 40%) and salt rejection (increased by 8%) of the TFNC membrane. Furthermore, the incorporation of biocidal pTA-f-GO nanosheets into the PA active layer contributed to improving the antibacterial properties by 80%, compared to pristine membrane. The fabrication of the pTA-f-GO nanosheets embedded in the PA layer presented in this study is a very practical, scalable and generic process that can potentially be applied in different types of separation membranes resulting in less energy consumption, increased cost-efficiency and improved performance.

Advanced Silicon Chemistry in Australia: Forming Strong Links with Asia.

This paper details Australian commercial and academic silicon research. Areas of interest include silicon metal, polysiloxane polymers, copolymers, cyclics, emulsions, microemulsions, silanes, silane coupling agents, sol-gel chemistry and water-treatments, porous silicon, polysiloxane degradation, silicon hydrogel contact lenses, silanolate synthesis, siloxane interfacial polymerisation, hydrosilylation, polysiloxane electrolytes for lithium ion batteries, silanes for PBX materials, octafunctionalized polyhedral oligomeric silsesquioxanes (POSS), POSS hybrids, sol-gel hydrogenation catalysts, silane modification of silica, sol-gel energy storage, silicate grout stabilisation, GeoPolymer concretes, aerogel insulating foams, "Phaco-Ersatz" Accommodating Gel-Intraocular Lens technologies. Strong collaborative opportunities, in silicon, with Asia, exist with organisations such as: 1) The Asian Silicon Society and 2) The Agency for the Assessment and Application of Technology (BPPT) Indonesia.

Single-Step Assembly of Multifunctional Poly(tannic acid)-Graphene Oxide Coating To Reduce Biofouling of Forward Osmosis Membranes.

Graphene oxide (GO) nanosheets have antibacterial properties that have been exploited as a biocidal agent used on desalination membrane surfaces in recent research. Nonetheless, improved strategies for efficient and stable attachment of GO nanosheets onto the membrane surface are still required for this idea to be commercially viable. To address this challenge, we adopted a novel, single-step surface modification approach using tannic acid cross-linked with polyethylene imine as a versatile platform to immobilize GO nanosheets to the surface of polyamide thin film composite forward osmosis (FO) membranes. An experimental design based on Taguchi's statistical method was applied to optimize the FO processing conditions in terms of water and reverse solute fluxes. Modified membranes were analyzed using water contact angle, adenosine triphosphate bioluminescence, total organic carbon, Fourier transform infrared spectroscopy, ζ potential, X-ray photoelectron spectroscopy, transmission electron microscopy, and atomic force microscopy. These results show that membranes were modified with a nanoscale (<10 nm), smooth, hydrophilic coating that, compared to pristine membranes, improved filtration and significantly mitigated biofouling by 33% due to its extraordinary, synergistic antibacterial properties (99.9%).

Physical characterization and in silico modeling of inulin polymer conformation during vaccine adjuvant particle formation.

This study combined physical data from synchrotron SAXS, FTIR and microscopy with in-silico molecular structure predictions and mathematical modeling to examine inulin adjuvant particle formation and structure. The results show that inulin polymer chains adopt swollen random coil in solution. As precipitation occurs from solution, interactions between the glucose end group of one chain and a fructose group of an adjacent chain help drive organized assembly, initially forming inulin ribbons with helical organization of the chains orthogonal to the long-axis of the ribbon. Subsequent aggregation of the ribbons results in the layered semicrystalline particles previously shown to act as potent vaccine adjuvants. γ-Inulin adjuvant particles consist of crystalline layers 8.5 nm thick comprising helically organized inulin chains orthogonal to the plane of the layer. These crystalline layers alternate with amorphous layers 2.4 nm thick, to give overall particle crystallinity of 78%.

Fine-Tuning the Surface of Forward Osmosis Membranes via Grafting Graphene Oxide: Performance Patterns and Biofouling Propensity.

Graphene oxide (GO) nanosheets were attached to the polyamide selective layer of thin film composite (TFC) forward osmosis (FO) membranes through a poly L-Lysine (PLL) intermediary using either layer-by-layer or hybrid (H) grafting strategies. Fourier transform infrared spectroscopy, zeta potential, and thermogravimetric analysis confirmed the successful attachment of GO/PLL, the surface modification enhancing both the hydrophilicity and smoothness of the membrane's surface demonstrated by water contact angle, atomic force microscopy, and transmission electron microscopy. The biofouling resistance of the FO membranes determined using an adenosine triphosphate bioluminescence test showed a 99% reduction in surviving bacteria for GO/PLL-H modified membranes compared to pristine membrane. This antibiofouling property of the GO/PLL-H modified membrane was reflected in reduced flux decline compared to all other samples when filtering brackish water under biofouling conditions. Further, the high density and tightly bound GO nanosheets using the hybrid modification reduced the reverse solute flux compared to the pristine, which reflects improved membrane selectivity. These results illustrate that the GO/PLL-H modification is a valuable addition to improve the performance of FO TFC membranes.

Inulin crystal initiation via a glucose-fructose cross-link of adjacent polymer chains: atomic force microscopy and static molecular modelling.

Semi-crystalline microparticles of inulin (MPI) have clinical utility as potent human vaccine adjuvants but their relevant surface structure and crystal assembly remain undefined. We show inulin crystal surfaces to resemble multi-layered, discoid radial spherulites resulting from very rapid formation of complex tertiary structures, implying directed crystal initiation. Physical and in silico molecular modelling of unit cells confirm steric feasibility of initiation by hydrogen-bonded cross-linking of terminal glucose to a fructose of another chain, mimicking bonding in sucrose crystals. A strong, chelate-like dual H-bond is proposed to compel the known antiparallel alignment of inulin chains. Such cross-linking would require one extra fructose per chain in the native inulin crystal, as observed. Completion of five H-bonded internal ring-domains would 'lock in' each new 6-fructose structural unit of each antiparallel helix pair to create a new isoform. All known properties of inulin isoforms follow readily from these concepts.

Inulin isoforms differ by repeated additions of one crystal unit cell.

Inulin isoforms, especially delta inulin, are important biologically as immune activators and clinically as vaccine adjuvants. In exploring action mechanisms, we previously found regular increments in thermal properties of the seven-member inulin isoform series that suggested regular additions of some energetic structural unit. Because the previous isolates carried additional longer chains that masked defining ranges, these were contrasted with new isoform isolates comprising only inulin chain lengths defining that isoform. The new series began with 19 fructose units per chain (alpha-1 inulin), increasing regularly by 6 fructose units per isoform. Thus the 'energetic unit' equates to 6 fructose residues per chain. All isoforms showed indistinguishable X-ray diffraction patterns that were also identical with known inulin crystals. We conclude that an 'energetic unit' equates to one helix turn of 6 fructose units per chain as found in one unit cell of the inulin crystal. Each isoform chain comprised progressively more helix turns plus one additional fructose and glucose residues per chain.

The polysaccharide inulin is characterized by an extensive series of periodic isoforms with varying biological actions.

In studying the molecular basis for the potent immune activity of previously described gamma and delta inulin particles and to assist in production of inulin adjuvants under Good Manufacturing Practice, we identified five new inulin isoforms, bringing the total to seven plus the amorphous form. These isoforms comprise the step-wise inulin developmental series amorphous → alpha-1 (AI-1) → alpha-2 (AI-2) → gamma (GI) → delta (DI) → zeta (ZI) → epsilon (EI) → omega (OI) in which each higher isoform can be made either by precipitating dissolved inulin or by direct conversion from its precursor, both cases using regularly increasing temperatures. At higher temperatures, the shorter inulin polymer chains are released from the particle and so the key difference between isoforms is that each higher isoform comprises longer polymer chains than its precursor. An increasing trend of degree of polymerization is confirmed by end-group analysis using (1)H nuclear magnetic resonance spectroscopy. Inulin isoforms were characterized by the critical temperatures of abrupt phase-shifts (solubilizations or precipitations) in water suspensions. Such (aqueous) "melting" or "freezing" points are diagnostic and occur in strikingly periodic steps reflecting quantal increases in noncovalent bonding strength and increments in average polymer lengths. The (dry) melting points as measured by modulated differential scanning calorimetry similarly increase in regular steps. We conclude that the isoforms differ in repeated increments of a precisely repeating structural element. Each isoform has a different spectrum of biological activities and we show the higher inulin isoforms to be more potent alternative complement pathway activators.

Analysis of the hydrolysis of inulin using real time 1H NMR spectroscopy.

The hydrolysis of various carbohydrates was investigated under acidic conditions in real time by (1)H NMR spectroscopy, with a focus on the polysaccharide inulin. Sucrose was used as a model compound to illustrate the applicability of this technique. The hydrolysis of sucrose was shown to follow pseudo first order kinetics and have an activation energy of 107.0 kJ mol(-1) (SD 1.7 kJ mol(-1)). Inulin, pullulan and glycogen also all followed pseudo first order kinetics, but had an initiation phase at least partially generated by the protonation of the glycosidic bonds. It was also demonstrated that polysaccharide chain length has an effect on the hydrolysis of inulin. For short chain inulin (DPn 18, SD 0.70) the activation energy calculated for the hydrolytic cleavage of glucose was similar to sucrose at 108.5 kJ mol(-1) (SD 0.60). For long chain inulin (DPn 30, SD 1.3) the activation energy for the hydrolytic cleavage of glucose was reduced to 80.5 kJ mol(-1) (SD 2.3 kJ mol(-1)). This anomaly has been attributed to varied conformations for the two different lengths of inulin chain in solution.

Observation of the keto tautomer of D-fructose in D(2)O using (1)H NMR spectroscopy.

D-Fructose was analysed by NMR spectroscopy and previously unidentified (1)H NMR resonances were assigned to the keto and α-pyranose tautomers. The full assignment of shifts for the various fructose tautomers enabled the use of (1)H NMR spectroscopy in studies of the mutarotation (5-25°C) and tautomeric composition at equilibrium (5-50°C). The mutarotation of ß-pyranose to furanose tautomers in D(2)O at a concentration of 0.18 M was found to have an activation energy of 62.6 kJmol(-1). At tautomeric equilibrium (20°C in D(2)O) the distribution of the ß-pyranose, ß-furanose, α-furanose, α-pyranose and the keto tautomers was found to be 68.23%, 22.35%, 6.24%, 2.67% and 0.50%, respectively. This tautomeric composition was not significantly affected by varying concentrations between 0.089 and 0.36 M or acidification to pH 3. Upon equilibrating at 6 temperatures between 5 and 50°C there was a linear relationship between the change in concentration and temperature for all forms.

Variation in performance of surfactant loading and resulting nitrate removal among four selected natural zeolites.

Surfactant modified zeolites (SMZs) have the capacity to target various types of water contaminants at relatively low cost and thus are being increasingly considered for use in improving water quality. It is important to know the surfactant loading performance of a zeolite before it is put into application. In this work we compare the loading capacity of a surfactant, hexadecyltrimethylammonium bromide (HDTMA-Br), onto four natural zeolites obtained from specific locations in the USA, Croatia, China, and Australia. The surfactant loading is examined using thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, and Raman spectroscopy. We then compare the resulting SMZs performance in removing nitrate from water. Results show that TGA is useful to determine the HDTMA loading capacity on natural zeolites. It is also useful to distinguish between a HDTMA bi-layer and a HDTMA mono-layer on the SMZ surface, which has not been previously reported in the literature. TGA results infer that HDTMA (bi-layer) loading decreases in the order of US zeolite>Croatian zeolite>Chinese zeolite>Australian zeolite. This order of loading explains variation in performance of nitrate removal between the four SMZs. The SMZs remove 8-18 times more nitrate than the raw zeolites. SMZs prepared from the selected US and Croatian zeolites were more efficient in nitrate removal than the two zeolites commercially obtained from Australia and China.

Synthesis of Carbon Nanotube (CNT) Composite Membranes.

Carbon nanotubes are attractive approach for designing of new membranes for advanced molecular separation because of their unique transport properties and ability to mimic biological protein channels. In this work the synthetic approach for fabrication of carbon nanotubes (CNTs) composite membranes is presented. The method is based on growth of multi walled carbon nanotubes (MWCNT) using chemical vapour deposition (CVD) on the template of nanoporous alumina (PA) membranes. The influence of experimental conditions including carbon precursor, temperature, deposition time, and PA template on CNT growth process and quality of fabricated membranes was investigated. The synthesis of CNT/PA composites with controllable nanotube dimensions such as diameters (30-150 nm), and thickness (5-100 µm), was demonstrated. The chemical composition and morphological characteristics of fabricated CNT/PA composite membranes were investigated by various characterisation techniques including scanning electron microscopy (SEM), energy-dispersive x-ray spectroscopy (EDXS), high resolution transmission electron microscopy (HRTEM) and x-ray diffraction (XRD). Transport properties of prepared membranes were explored by diffusion of dye (Rose Bengal) used as model of hydrophilic transport molecule.

Aligned silane-treated MWCNT/liquid crystal polymer films.

We report on a method to preferentially align multiwall carbon nanotubes (MWCNTs) in a liquid crystalline matrix to form stable composite thin films. The liquid crystalline monomeric chains can be crosslinked to form acrylate bridges, thereby retaining the nanotube alignment. Further post-treatment by ozone etching of the composite films leads to an increase in bulk conductivity, leading to higher emission currents when examined under conducting scanning probe microscopy. The described methodology may facilitate device manufacture where electron emission from nanosized tips is important in the creation of new display devices.

Ethynylbenzene monolayers on gold: a metal-molecule binding motif derived from a hydrocarbon.

Exposure of a Au(111) surface to ethynylbenzene in solution leads to the formation of a bound monolayer. A chemisorption process occurs to give a stable layer consisting of oxygen-containing hydrocarbon species. Ethynylbenzene itself does not oxidize under the deposition conditions indicating that the gold surface facilitates the oxidation process. Calculations show that ethynylbenzene and its oxidation products phenylacetic acid and phenyloxirane have positive binding energies to the gold surface. 1,4-Diethynylbenzene also binds to Au(111) and anchors gold nanoparticles deposited from solution to form dense, semiregular arrays.

[Paralysis plexus brachialis--diagnostic and therapeutic protocol]. / Paralysis plexus brachialis--dijagnosticki i terapijski protokol.

Traction injuries of the brachial plexus, if obstetrical, are diagnosed immediately upon birth based on clinical features, while the type and the degree of injury are confirmed by neurophysiological examination. In such cases, physical therapy is promptly applied and followed up until the age of three months, when, after consultation with neurosurgeon, either physical therapy is continued or surgery is performed. In traumatic injuries, based on clinical, neurological and neurophysiological findings, necessary surgical or pre- and postoperative physiatric interventions are performed. Timely diagnostics and therapy of brachial plexus injuries, followed by recovery of paralytic muscle motor function, enable motion coordination and prevention of contractures. From 2000-2004, 181 cases of brachial plexus birth trauma and 26 cases of brachial plexus traumatic lesions were diagnosed and treated in our institution. Among patients, there were 107 boys and 74 girls with birth injury of the brachial plexus, and 16 boys and 8 girls with traction injury of the brachial plexus sustained in traffic accident. Physical treatment involved combined thermo-, electro-, and kinesitherapy, with alignment of extremities. Upon completion of any treatment session and clinical and neurophysiological examinations, doctors' consultation determined whether to continue with physical therapy or to perform surgery followed by physical therapy with rehabilitation until achieving the maximal motor recovery. The analysis of results showed that functional and motor recovery was best if therapy was initiated immediately after the obstetrical injury or following the surgery. Therapeutic approach was individualized and depended on the level and degree of lesions. Thus, maximal motor and functional recovery of the injured extremity was achieved, with work therapy and professional orientation of such patients.