RESUMEN
[This corrects the article DOI: 10.1039/D3NA00811H.].
RESUMEN
The generation of stable white light emission using lead-free perovskites remains a huge challenge in the development of future display and lighting technologies, due to fast material deterioration and the decrease of the color quality. In this work, we report a combination of diverse types of 2D A2SnX4 (A = bulky cation, X = Br, I) perovskites exhibiting self-trapped exciton (STE) emission and blue luminescent carbon quantum dots (CQDs), with the purpose of generating A2SnX4/CQD inks with a broadband emission in the visible region and a tunable white light color. By varying the concentration of the 2D perovskite, the white emission of the mixtures is modulated to cool, neutral, and warm tonalities, with a PL quantum yield up to 45%. From the combinations, the PEA2SnI4/CQD-based ink shows the longest stability, due to suitable surface ligand passivation provided by the capping ligands covering the CQDs, compensating the defect sites in the perovskite. Then, by incorporating the PEA2SnI4/CQDs inks into an acrylate polymer matrix, the quenching of the PL component from the perovskite was restrained, being stable for >400 h under ambient conditions and at a relative humidity of â¼50%, and allowing the preparation of complex 3D-printed composites with stable white emission tonalities. This contribution offers an application of STE-based Sn-perovskites to facilitate the future fabrication of lead-free white-light optoelectronic devices.
RESUMEN
Self-assembling molecules (SAMs), as selective contacts, play an important role in perovskite solar cells (PSCs), determining the performance and stability of these photovoltaic devices. These materials offer many advantages over other traditional materials used as hole-selective contacts, as they can be easily deposited on a large area of metal oxides, can modify the work function of these substrates, and reduce optical and electric losses with low material consumption. However, the most interesting thing about SAMs is that by modifying the chemical structure of the small molecules used, the energy levels, molecular dipoles, and surface properties of this assembled monolayer can be modulated to fine-tune the desired interactions between the substrate and the active layer. Due to the important role of organic chemistry in the field of photovoltaics, in this review, we will cover the current challenges for the design and synthesis of SAMs PSCs. Discussing, the structural features that define a SAM, (ii) disclosing how commercial molecules inspired the synthesis of new SAMs; and (iii) detailing the pros- and cons- of the reported synthetic protocols that have been employed for the synthesis of molecules for SAMs, helping synthetic chemists to develop novel structures and promoting the fast industrialization of PSCs.
RESUMEN
Current improvement in perovskite solar cells (PSCs) has been achieved by interface engineering and fine-tuning of charge-selective contacts. In this work, we report three novel molecules that can form self-assembled layers (SAMs) as an alternative to the most commonly used p-type contact material, PTAA. Two of these molecules have bidentate anchoring groups (MC-54 and MC-55), while the last one is monodentate (MC-45). Besides the PTAA comparison, we also compared those two types of molecules and their effect on the solar cell's performance. Devices fabricated with MC-54 and MC-55 showed a remarkable field factor (about 80%) and a better current density, leading to higher efficient solar cells in comparison to MC-45 and PTAA. Moreover, mono- and bidentate present higher stability and reproducibility in comparison to PTAA.
RESUMEN
The incorporation of p-type functionalized carbon nanohorns (CNHs) in perovskite solar cells (PSCs) and their comparison with p-type functionalized single- and double-walled carbon nanotubes (SWCNTs and DWCNTs) are reported in this study for the first time. These p-type functionalized carbon nanomaterial (CNM) derivatives were successfully synthesized by [2 + 1] cycloaddition reaction with nitrenes formed from triphenylamine (TPA) and 9-phenyl carbazole (Cz)-based azides, yielding CNHs-TPA, CNHs-Cz, SWCNTs-Cz, SWCNTs-TPA, DWCNTs-TPA, and DWCNTs-Cz. These six novel CNMs were incorporated into the spiro-OMeTAD-based hole transport layer (HTL) to evaluate their impact on regular mesoporous PSCs. The photovoltaic results indicate that all p-type functionalized CNMs significantly improve the power conversion efficiency (PCE), mainly by enhancing the short-circuit current density (Jsc) and fill factor (FF). TPA-functionalized derivatives increased the PCE by 12-17% compared to the control device without CNMs, while Cz-functionalized derivatives resulted in a PCE increase of 4-8%. Devices prepared with p-type functionalized CNHs exhibited a slightly better PCE compared with those based on SWCNTs and DWCNTs derivatives. The increase in hole mobility of spiro-OMeTAD, additional p-type doping, better energy alignment with the perovskite layer, and enhanced morphology and contact interface play important roles in enhancing the performance of the device. Furthermore, the incorporation of p-type functionalized CNMs into the spiro-OMeTAD layer increased device stability by improving the hydrophobicity of the layer and enhancing the hole transport across the MAPI/spiro-OMeTAD interface. After 28 days under ambient conditions and darkness, TPA-functionalized CNMs maintained the performance of the device by over 90%, while Cz-functionalized CNMs preserved it between 75 and 85%.
RESUMEN
Hole-transporting materials (HTMs) have demonstrated their crucial role in promoting charge extraction, interface recombination, and device stability in perovskite solar cells (PSCs). Herein, we present the synthesis of a novel dopant-free spiro-type fluorine core-based HTM with four ethoxytriisopropylsilane groups (Syl-SC) for inverted planar perovskite solar cells (iPSCs). The thickness of the Syl-SC influences the performance of iPSCs. The best-performing iPSC is achieved with a 0.8 mg/mL Syl-SC solution (ca. 15 nm thick) and exhibits a power conversion efficiency (PCE) of 15.77%, with Jsc = 20.00 mA/cm2, Voc = 1.006 V, and FF = 80.10%. As compared to devices based on PEDOT:PSS, the iPSCs based on Syl-SC exhibit a higher Voc, leading to a higher PCE. Additionally, it has been found that Syl-SC can more effectively suppress charge interfacial recombination in comparison to PEDOT:PSS, which results in an improvement in fill factor. Therefore, Syl-SC, a facilely processed and efficient hole-transporting material, presents a promising cost-effective alternative for inverted perovskite solar cells.
RESUMEN
Electro- and photochemical CO2 reduction (CO2R) is the quintessence of modern-day sustainable research. We report our studies on the electro- and photoinduced interfacial charge transfer occurring in a nanocrystalline mesoporous TiO2 film and two TiO2/iron porphyrin hybrid films (meso-aryl- and ß-pyrrole-substituted porphyrins, respectively) under CO2R conditions. We used transient absorption spectroscopy (TAS) to demonstrate that, under 355 nm laser excitation and an applied voltage bias (0 to -0.8 V vs Ag/AgCl), the TiO2 film exhibited a diminution in the transient absorption (at -0.5 V by 35%), as well as a reduction of the lifetime of the photogenerated electrons (at -0.5 V by 50%) when the experiments were conducted under a CO2 atmosphere changing from inert N2. The TiO2/iron porphyrin films showed faster charge recombination kinetics, featuring 100-fold faster transient signal decays than that of the TiO2 film. The electro-, photo-, and photoelectrochemical CO2R performance of the TiO2 and TiO2/iron porphyrin films are evaluated within the bias range of -0.5 to -1.8 V vs Ag/AgCl. The bare TiO2 film produced CO and CH4 as well as H2, depending on the applied voltage bias. In contrast, the TiO2/iron porphyrin films showed the exclusive formation of CO (100% selectivity) under identical conditions. During the CO2R, a gain in the overpotential values is obtained under light irradiation conditions. This finding was indicative of a direct transfer of the photogenerated electrons from the film to absorbed CO2 molecules and an observed decrease in the decay of the TAS signals. In the TiO2/iron porphyrin films, we identified the interfacial charge recombination processes between the oxidized iron porphyrin and the electrons of the TiO2 conduction band. These competitive processes are considered to be responsible for the diminution of direct charge transfer between the film and the adsorbed CO2 molecules, explaining the moderate performances of the hybrid films for the CO2R.
RESUMEN
[This corrects the article DOI: 10.1039/C9TA07361B.].
RESUMEN
The photocatalytic and electrocatalytic conversion of CO2 has the potential to provide valuable products, such as chemicals or fuels of interest, at low cost while maintaining a circular carbon cycle. In this context, carbon dots possess optical and electrochemical properties that make them suitable candidates to participate in the reaction, either as a single component or forming part of more elaborate catalytic systems. In this review, we describe several strategies where the carbon dots participate, both with amorphous and graphitic structures, in the photocatalysis or electrochemical catalysis of CO2 to provide different carbon-containing products of interest. The role of the carbon dots is analyzed as a function of their redox and light absorption characteristics and their complementarity with other known catalytic systems. Moreover, detailed information about synthetic procedures is also reviewed.
RESUMEN
In recent years, several examples of materials combining the molecular bistability of spin crossover (SC) and fluorescent moieties have flourished in the literature. Fluorescence is a sensitive probe, and SC may provide modulation of the signal, thus affording systems in which physicochemical changes in the environment of the SC centers could be effectively detected. On the contrary, organic semiconductor polymers are of great interest and, furthermore, have been successfully applied in different optoelectronic devices, such as transistors, solar cells, and light-emitting devices. Herein, we report on the fabrication of composites comprising a fluorescent, organic semiconductor polymer (polyfluorene) and a spin crossover compound, an Fe(II)-triazole coordination polymer. A strong synergy was observed between the spin transition of the Fe(II) compound and variations in the fluorescence of the organic polymer. The fluorescence modulation was shown to be reversible, with an increase of ≤20% with respect to the original value.
RESUMEN
We describe the preparation of inverted white light emitting diodes by solution processing. The active layer is formed uniquely by Carbon Nanodots (C-dots) that display white-light emission at voltage close to 5 V when combined with metal oxides as charge transport layers. Moreover, we have demonstrated that the white light is not the product of charge transfer between the polymer selective contact and the C-dots but the result of the different recombination processes within the C-dots.
RESUMEN
A detailed account of the limiting factors of solvent-annealed bulk-heterojunction small-molecule organic solar cells is given. This account is based on the extensive characterisation of solar cell devices made from a library of five diketopyrolopyrole (DPP) donor dyes. Their chemical structure is designed in such a way as to provide insights into the energetics of solar cell active layer micro-structure formation. Numerous chemical and physical properties of the active layers are assessed and inter-related such as light absorption, molecular packing in the solid state, crystal-forming properties in thin films, charge carrier mobility and charge carrier recombination kinetics. A myriad of characterisation techniques are used such as UV/Vis absorption spectroscopy, photoluminescence spectroscopy, XRD, AFM and photo-induced transient measurements, which provide information on the optical properties of the active layers, morphology and recombination kinetics. Consequently, a mechanism for the solvent-vapour-annealing-assisted formation of crystalline domains of donor molecules in the active layer is proposed, and the micro-structural features are related to the J-V characteristics of the devices. According to this model, the crystalline phase in which the donor crystallise in the active layer is the key determinant to direct the formation of the micro-structure.
Asunto(s)
Suministros de Energía Eléctrica , Pirroles/química , Energía Solar , Solventes/químicaRESUMEN
Graphene and carbon quantum dots have extraordinary optical and electrical features because of their quantum confinement properties. This makes them attractive materials for applications in photovoltaic devices (PV). Their versatility has led to their being used as light harvesting materials or selective contacts, either for holes or electrons, in silicon quantum dot, polymer or dye-sensitized solar cells. In this review, we summarize the most common uses of both types of semiconducting materials and highlight the significant advances made in recent years due to the influence that synthetic materials have on final performance.
RESUMEN
The influence of the chain length and the molecular weight distribution of the electroluminescent polymer on the carrier transport properties and morphology of air stable hybrid light-emitting diodes is reported. It is found that variations between diverse as-received commercial batches play a major role in the performance of the devices, whose maximum luminance can differ up to 2 orders of magnitude. Through complementary optoelectronic, structural, and morphological characterization techniques, we provide insights into the relationship between charge dynamics and the structure of polymeric electroluminescent materials. The carrier dynamics are found to be dominated by both the polymeric chain length and the hole transport, which in turn is dependent on the concentration of trap states. Furthermore, the chain length is seen to affect the morphology of the active layer.
RESUMEN
The modification of the planar organic/inorganic interface of the hybrid light-emitting diodes by the addition of a tailored nanoporous crystalline metal oxide increases up to 1 order of magnitude the efficiency of the resulting devices. In this Letter, we present the preparation and characterization of the novel controlled 3D interface and discuss how the interaction between the metal oxide and the polymer at the interface results in such an improvement.
Asunto(s)
Luz , Oro/química , Molibdeno/química , Nanoporos , Óxidos/química , Polímeros/química , Compuestos de Estaño/química , Circonio/químicaRESUMEN
In the Dye Sensitized Solar Cell (DSSC) the dye sensitizer carries out the light harvesting function and is therefore crucial in determining overall cell efficiency. In addition, the dye sensitizer can influence many of the key electron transfer processes occurring at the TiO(2)/dye/electrolyte interface which also determine efficiency. Dye structure can influence and drive forward electron injection into the conduction band of the TiO(2). Conversely, dye structure can help retard loss electron transfer processes such as charge recombination of injected electrons in the TiO(2) with dye cations and also recombination of these electrons with the electrolyte. Therefore tuning dye sensitizer light absorbing properties and control of the aforementioned electron transfer processes through structural design of the dye sensitizer is an important avenue through which optimization of DSSC efficiency should be pursued. In this critical review the latest work focusing on the design of dyes for efficient DSSCs is revised (111 references).
RESUMEN
We report our results on the influence of the dipole moment of small molecules anchored to the surface of CdSe nanocrystals, over the interfacial charge recombination dynamics in CdSe/P3HT (P3HT : poly-3-hexylthiophene). The polarizability of the CdSe/P3HT interface is key to achieving efficient charge separation and slow back electron transfer, two of the most important processes to boost the photocurrent and voltage in CdSe/P3HT photovoltaic devices.
RESUMEN
We report the charge transfer dynamics for CdSe quantum dot (QD) sensitized solar cells. The effect of QD sensitization mode in recombination kinetics has been measured and their implications in solar cell performance analyzed.
RESUMEN
Here, we present a new DSSC design, consisting of sequential QDs and dye sensitization layers, that opens the path toward high optical density DSSCs that cover a significant part of the solar spectrum. The new configuration is enabled by the application of an amorphous TiO2 layer between the two sensitizers, allowing both electron injection from the outer absorber and fast hole extraction from the inner sensitizing layer. Utilizing two sensitizing layers, we obtain a 250% increase in cell efficiency compared to a QD monolayer cell.
RESUMEN
We demonstrate remarkably fast incorporation and high loading of cytochrome c within thin films of periodically ordered nanocrystalline TiO(2) deposited on transparent electrodes. The immobilized cytochrome c is not denaturated and it can be reversibly reduced without mediator over the time scale of a few seconds as evidenced by spectroelectrochemistry.