Concurrent uper limb and hip fracture in the elderly: experience at our centre. / Fracturas concomitantes de miembro superior y cadera en pacientes mayores de 65 años: experiencia en nuestro centro.

INTRODUCTION: The incidence of hip fracture in the elderly is on the rise, occasionally accompanied by concurrent upper limb fractures. Our investigation aims to determine whether these patients experience poorer functional outcomes, prolonged hospitalization, or higher mortality rates when compared to those with isolated hip fracture. MATERIAL AND METHODS: We retrospectively reviewed 1,088 elderly patients admitted to our centre with hip fracture between January 2017 and March 2020. We recorded the presence of concomitant fractures and their treatment. We analyzed the duration of hospital stay, in-hospital mortality and function. RESULTS: We identified 63 patients with concomitant upper limb fracture (5.6%). Among them, 93.7% were women, and the average age was 86.4 years. 80.9% of the upper limb fractures were distal radius or proximal humerus. Patients with concomitant fracture had increased length of stay (mean, 19.6 vs, 12.8, p=0.002), decreased proportion of patients returning to their own home at discharge (23.6% vs, 26.3%, p=0.042) and increased in-hospital mortality rate (9.5% vs, 5.9%, p=0.003). CONCLUSIONS: Patients with concomitant upper limb fracture require a longer length of stay and exhibit an elevated in-hospital mortality rate. Furthermore, this condition is associated with a reduced short-term functional recovery, thereby decreasing the chances of the patient returning home upon hospital discharge.

Biogenic-to-lithogenic handoff of particulate Zn affects the Zn cycle in the Southern Ocean.

Zinc (Zn) is vital to marine organisms. Its active uptake by phytoplankton results in a substantial depletion of dissolved Zn, and Zn bound to particulate organic matter replenishes dissolved Zn in the ocean through remineralization. However, we found that particulate Zn changes from Zn bound to phosphoryls in cells to recalcitrant inorganic pools that include biogenic silica, clays, and iron, manganese, and aluminum oxides in the Southern Ocean water column. The abundances of inorganic pools increase with depth and are the only phases preserved in sediments. Changes in the particulate-Zn speciation influence Zn bioavailability and explain the decoupling of Zn and phosphorus and the correlation of Zn and silicon in the water column. These findings reveal a new dimension to the ocean Zn cycle, implicating an underappreciated role of inorganic Zn particles and their impact on biological productivity.

Structural analysis of potato starch transformation during high-energy ball-milling: Oxygen and humidity content effects.

High Energy Ball-Milling (HEBM) modifies starchs' granule morphology, physicochemical properties, and chemical structure. However, understanding how the HEBM changes the starch chemical structure is necessary to control these modifications. Therefore, this study aimed to investigate the changes in potato starch's long- and short-range molecular order during HEBM at different environmental conditions such as oxygen (Air) and humidity content. Due to the correlation between the starch modification and the energy supplied (Esupp) by the HEBM, Burgio's equation was used to calculate this energy. The starch transformation was followed by X-ray diffraction, Fourier Transform-Infrared Spectroscopy, and Raman spectroscopy. A Principal Component Analysis (PCA) was conducted to reduce the HEBM variables. PAC analysis demonstrated that the different oxygen-humidity conditions do not affect the HEBM of potato starch. Based on the starch chemical structure transformation correlated with Esupp during HEBM, four stages were observed: orientation, modification, mechanolysis, and over-destruction. It was identified for the first time that at low milling energy (<1.5 kJ/g, orientation stage), the glycosidic rings change their orientation, and starch-water interaction increases while the starch's organization reduces. Ergo, the potato starch could be more susceptible to chemical modifications during the first two stages.

Unraveling the Interplay between Quantum Transport and Geometrical Conformations in Monocyclic Hydrocarbons' Molecular Junctions.

In the field of molecular electronics, especially in quantum transport experiments, determining the geometrical configurations of a single molecule trapped between two electrodes can be challenging. To address this challenge, we employed a combination of molecular dynamics (MD) simulations and electronic transport calculations based on density functional theory to determine the molecular orientation in our break-junction experiments under ambient conditions. The molecules used in this study are common solvents used in molecular electronics, such as benzene, toluene (aromatic), and cyclohexane (aliphatic). Furthermore, we introduced a novel criterion based on the normal vector of the surface formed by the cavity of these ring-shaped monocyclic hydrocarbon molecules to clearly define the orientation of the molecules with respect to the electrodes. By comparing the results obtained through MD simulations and density functional theory with experimental data, we observed that both are in good agreement. This agreement helps us to uncover the different geometrical configurations that these molecules adopt in break-junction experiments. This approach can significantly improve our understanding of molecular electronics, especially when using more complex cyclic hydrocarbons.

Distinct nitrogen isotopic compositions of healthy and cancerous tissue in mice brain and head&neck micro-biopsies.

BACKGROUND: Cancerous cells can recycle metabolic ammonium for their growth. As this ammonium has a low nitrogen isotope ratio (15N/14N), its recycling may cause cancer tissue to have lower 15N/14N than surrounding healthy tissue. We investigated whether, within a given tissue type in individual mice, tumoral and healthy tissues could be distinguished based on their 15N/14N. METHODS: Micro-biopsies of murine tumors and adjacent tissues were analyzed for 15N/14N using novel high-sensitivity methods. Isotopic analysis was pursued in Nude and C57BL/6 mice models with mature orthotopic brain and head&neck tumors generated by implantation of H454 and MEERL95 murine cells, respectively. RESULTS: In the 7 mice analyzed, the brain tumors had distinctly lower 15N/14N than healthy neural tissue. In the 5 mice with head&neck tumors, the difference was smaller and more variable. This was at least partly due to infiltration of healthy head&neck tissue by tumor cells. However, it may also indicate that the 15N/14N difference between tumoral and healthy tissue depends on the nitrogen metabolism of the healthy organ in question. CONCLUSIONS: The findings, coupled with the high sensitivity of the 15N/14N measurement method used here, suggest a new approach for micro-biopsy-based diagnosis of malignancy as well as an avenue for investigation of cancer metabolism.

Testosterone use in postmenopausal women.

The physiological, clinical and therapeutic aspects of testosterone in women's health are still a matter of controversy and debate. Quality evidence data of clinical trials favors the use of transdermal testosterone in postmenopausal women with female sexual dysfunction causing distress. Doses of testosterone should approximate physiological testosterone levels found in premenopausal women, avoiding supraphysiological concentrations that expose women to adverse events. Short-term treatment periods have been shown to be effective and safe in postmenopausal women with hypoactive sexual desire disorder/dysfunction. However, long-term safety of testosterone use must be determined.

Facilitating the design of HL7 domain models through a model-driven solution.

BACKGROUND AND GOAL: Health information systems are increasingly sophisticated and developing them is a challenge for software developers. Software engineers usually make use of UML as a standard model language that allows defining health information system entities and their relations. However, working with health system requires learning HL7 standards, that defines and manages standards related to health information systems. HL7 standards are varied, however this work focusses on v2 and v3 since these are the most used one on the area that this work is being conducted. This works aims to allow modeling HL7 standard by using UML. METHODS: Several techniques based on the MDE (Model-Driven Engineering) paradigm have been used to cope with it. RESULTS: A useful reference framework, reducing final users learning curve and allowing modeling maintainable and easy-going health information systems. CONCLUSIONS: By using this approach, a software engineer without any previous knowledge about HL7 would be able to solve the problem of modeling HL7-based health information systems. Reducing the learning curve when working in projects that need HL7 standards.

Validation of large-volume batch solar reactors for the treatment of rainwater in field trials in sub-Saharan Africa.

The efficiency of two large-volume batch solar reactors [Prototype I (140 L) and II (88 L)] in treating rainwater on-site in a local informal settlement and farming community was assessed. Untreated [Tank 1 and Tank 2-(First-flush)] and treated (Prototype I and II) tank water samples were routinely collected from each site and all the measured physico-chemical parameters (e.g. pH and turbidity, amongst others), anions (e.g. sulphate and chloride, amongst others) and cations (e.g. iron and lead, amongst others) were within national and international drinking water guidelines limits. Culture-based analysis indicated that Escherichia coli, total and faecal coliforms, enterococci and heterotrophic bacteria counts exceeded drinking water guideline limits in 61%, 100%, 45%, 24% and 100% of the untreated tank water samples collected from both sites. However, an 8 hour solar exposure treatment for both solar reactors was sufficient to reduce these indicator organisms to within national and international drinking water standards, with the exception of the heterotrophic bacteria which exceeded the drinking water standard limit in 43% of the samples treated with the Prototype I reactor (1 log reduction). Molecular viability analysis subsequently indicated that mean overall reductions of 75% and 74% were obtained for the analysed indicator organisms (E. coli and enterococci spp.) and opportunistic pathogens (Klebsiella spp., Legionella spp., Pseudomonas spp., Salmonella spp. and Cryptosporidium spp. oocysts) in the Prototype I and II solar reactors, respectively. The large-volume batch solar reactor prototypes could thus effectively provide four (88 L Prototype II) to seven (144 L Prototype I) people on a daily basis with the basic water requirement for human activities (20 L). Additionally, a generic Water Safety Plan was developed to aid practitioners in identifying risks and implement remedial actions in this type of installation in order to ensure the safety of the treated water.

Artrodesis metatarsofalángica del hallux: comparación retrospectiva entre placa bloqueada y tornillos canulados / Hallux metatarsophalangeal arthrodesis: retrospective comparison between blocked plate and cannulated screws

Resumen: Introducción: Existen múltiples métodos e implantes utilizados para la artrodesis metatarsofalángica del hallux sin evidencia a favor de uno u otro en la bibliografía. El objetivo fue comparar los resultados clínicos y radiológicos de dos métodos e implantes utilizados en nuestro centro. Material y métodos: Revisión retrospectiva de 37 pies entre 2013 y 2017 (22 pies mediante placa y 15 mediante tornillos canulados). Se recogieron variables clínicas y radiológicas y se aplicaron las escalas AOFAS y Manchester-Oxford. Se estudiaron las variables descriptivas y analíticamente mediante el programa SPSS v15. Resultados: El grupo intervenido mediante placa lo compuso 77% de mujeres, con una edad media de 65 años y una distribución por diagnósticos de hallux valgus (HV) severo (36%), recidiva de hallux valgus (RHV) (36%) y hallux rigidus (HR) (28%), frente a 80% de mujeres, con media de 68 años y HVS (34%), RHV (46%) y HR (20%) en el grupo de tornillos canulados. No se encontró diferencias significativas en la corrección de los ángulos para HVS o RHV. La tasa de seudoartrosis dolorosa fue de 13% en ambos y la reintervención fue de 18% en el grupo de placas y 26% en el grupo de tornillos. Tanto la escala AOFAS como la M-O fueron mejores en el grupo de placa 63.8 versus 52.6 (p = 0.07); 30.1 versus 41.0 (p = 0.10); así como la satisfacción del paciente 86 versus 66% (p > 0.05) y el dolor postoperatorio 3.68 versus 5.58 (p > 0.05). Conclusión: Son grupos pequeños de estudio, sin aleatorización de implantes, ambas opciones son funcionales sin poder encontrar una preferente.

Abstract: Introduction: There are multiple methods and implants used for the metatarsophalangeal arthrodesis of hallux without evidence in favor of one or the other in the bibliography. The goal was to compare the clinical and radiological results of 2 methods and implants used in our center. Material and methods: Retrospective review of 37 feet between 2013 and 2017 (22 feet by plate and 15 by cannulated screws). Clinical and radiological variables were collected and the AOFAS and Manchester-Oxford scales were applied. Variables were studied descriptively and analytically through the SPSSv15 program. Results: The group intervened by plate was composed of 77% of women, with an average age of 65 years and a distribution by diagnosis of severe hallux valgus (HV) (36%), hallux valgus relapse (HVR) (36%) and hallux rigidus (HR) (28%), compared to 80% of women, 68 years old and HV (34%), HVR (46%) HR (20%) in the group of cannulated screws. No significant differences were found in the correction of angles for HV or HVR. The rate of painful pseudoarthrosis was 13% in both and the re-intervention was 18% in the plate group and 26% in the screw group. Both the AOFAS and M-O scales were better in the plate group 63.8 vs 52.6 (p = 0.07); 30.1 vs 41.0 (p = 0.10); as well as patient satisfaction 86% vs 66% (p > 0.05) and postoperative pain 3.68 vs 5.58 (p > 0.05). Conclusion: Small study groups, not implant randomization, both options are functional without being able to find a preferred one.