1,2,3-Triazolo[4,5-b]aminoquinolines: Design, synthesis, structure, acetylcholinesterase (AChE) and butyrylcholinesterase (BChE) inhibitory activity, and molecular docking of novel modified tacrines.

An efficient [4 + 2] cyclization protocol to synthesize a series of twelve examples of 1,2,3-triazolo[4,5-b]aminoquinolines (5) as novel structurally modified tacrines was obtained by reacting readily accessible precursors (i.e., 3-alky(aryl)-5-amino-1,2,3-triazole-4-carbonitriles (3)) and selected cycloalkanones (4) of five-, six-, and seven-membered rings. We evaluated the AChE and BChE inhibitory activity of the novel modified tacrines 5, and the compound derivatives from cyclohexanone (4b) showed the best AChE and BChE inhibitory activities. Specifically, 1,2,3-triazolo[4,5-b]aminoquinolines 5bb obtained from 3-methyl-carbonitrile (3b) showed the highest AChE (IC50 = 12.01 µM), while 5ib from 3-sulfonamido-carbonitrile (3i) was the most significant inhibitor for BChE (IC50 = 1.78 µM). In general, the inhibitory potency of compound 5 was weaker than the pure tacrine reference, and our findings may help to design and develop novel anticholinesterase drugs based on modified tacrines.

Regiocontrolled Synthesis of 1-Substituted-3(5)-carboxyalkyl-1H-pyrazoles Using Trichloromethyl Enones.

In this work, we present a regiocontrolled methodology to prepare 1-substituted-3(5)-carboxyalkyl-1H-pyrazoles using trichloromethyl enones as starting materials. It was found that the selectivity of the reaction depends on the nature of the hydrazine: when using arylhydrazine hydrochlorides, synthesis of the 1,3-regioisomer was achieved (22 examples, 37-97% yields), while the corresponding free hydrazine led exclusively to the 1,5-regioisomer (12 examples, 52-83% yields). The trichloromethyl group was used as a precursor for the carboxyalkyl moiety, furnishing a one-pot three-component regioselective protocol suitable for preparing both isomers at moderate to excellent yields. The selectivity of the reaction was investigated through NMR analyses and the structures of the products were unambiguously determined by SCXR analyses.

Chemoselective O-Alkylation of 4-(Trifluoromethyl)pyrimidin-2(1H)-ones Using 4-(Iodomethyl)pyrimidines.

This study reports two strategies for preparing O-alkyl derivatives of 6-substituted-4-(trifluoromethyl)pyrimidin-(1H)-ones: a linear protocol of alkylation, using a CCC-building block followed by [3 + 3]-type cyclocondensation with 2-methylisothiourea sulfate and a convergent protocol based on direct alkylation, using 4-(iodomethyl)-2-(methylthio)-6-(trihalomethyl)pyrimidines. It was found that the cyclocondensation strategy is not feasible; thus, the direct chemoselective O-alkylation was performed, and 18 derivatives of the targeted pyrimidines were obtained in 70-98% yields. The structure of the products was unambiguously determined via single crystal X-ray analyses and two-dimensional nuclear magnetic resonance experiments.

Bromo-Substituted Diazenyl-pyrazolo[1,5-a]pyrimidin-2-amines: Sonogashira Cross-Coupling Reaction, Photophysical Properties, Bio-interaction and HSA Light-Up Sensor.

A convenient synthesis of a broad series of thirteen examples of alkyne-spacer derivatives 2 from the well-known Sonogashira cross-coupling reaction on diazenyl-pyrazolo[1,5-a]pyrimidin-2-amine compounds 1 is reported. The reactivity of heterocycles 1 due the presence of selected electron-donor (EDG) and electron-withdrawing (EWG) groups attached to different alkynes was evaluated. Also, the reactional versatility due the position variation of the bromo atom at the scaffolds 1 was also investigated. In general, derivatives presented strong absorption bands at the 250-500 nm optical window and UV to cyan emission properties. Also, the redox analysis was recorded by electrochemical cyclic voltammetry technique. For HSA biomacromolecule assays, spectroscopic studies by UV-Vis, steady-state and time-resolved emission fluorescence, and molecular docking calculations evidenced the ability of each compound to establish interactions with human serum albumin (HSA). Finally, the behavior presented for this new class of heterocycles makes them a promising tool as optical sensors for albumins.

Substituent-Driven Selective N-/O-Alkylation of 4-(Trihalomethyl)pyrimidin-2(1H)-ones Using Brominated Enones.

The selective N- or O-alkylation of 4-(trihalomethyl)pyrimidin-2(1H)-ones, using 5-bromo enones/enaminones as alkylating agents, is reported. It was found that the selectivity toward the N- or O-regioisomer is driven by the substituent present at the 6-position of the pyrimidine ring, thus enabling the preparation of each isomer as the sole product, in 60-95% yields. Subsequent cyclocondensation of the enaminone moiety with nitrogen dinucleophiles led to pyrimidine-azole conjugates in 55-83% yields.

Hybridized 4-Trifluoromethyl-(1,2,3-triazol-1-yl)quinoline System: Synthesis, Photophysics, Selective DNA/HSA Bio-interactions and Molecular Docking.

The synthesis, structural analysis, and evaluation of the photophysical properties of twelve novel 2-aryl(heteroaryl)-6-(4-alkyl(aryl)-1H-1,2,3-triazol-1-yl)-4-(trifluoromethyl)quinolines (6-8), where aryl(heteroaryl)=Ph, 4-Me-C6 H4 , 4-F-C6 H4 and 2- furyl; 4-alkyl(aryl)=-CH2 OH, -(CH2 )5 CH3 and Ph, are reported. Hybrid scaffolds 6-8 were synthesized at 77-95 % yields by regioselective copper-catalysed azide-alkyne cycloaddition (CuAAC) reaction of unpublished 6-azido-4-(trifluoromethyl)quinolines (2) with selected terminal alkynes (3-5). Azido intermediates 2 were obtained from the reaction of 6-amino-4-(trifluoromethyl)quinolines (1) and sodium azide at good yields (78-87 %). Compounds 6-8 were structurally fully characterized by 1 H-, 13 C- and 19 F- and 1 H-13 C 2D-NMR (HSQC, HMBC) spectroscopy, X-ray diffraction (SC-XRD) and HRMS analysis. Moreover, the photophysical properties, DNA- and HSA-binding experiments (bio-interactions), and molecular docking studies for compounds 6-8 were performed. These are discussed and compared with similar compounds from recent research.

Investigating ESIPT and donor-acceptor substituent effects on the photophysical and electrochemical properties of fluorescent 3,5-diaryl-substituted 1-phenyl-2-pyrazolines.

This paper describes the synthesis, structural study, and evaluation of electrochemical and photophysical properties by UV-Vis absorption and fluorescence emission analysis (solution and solid-state) of a series of eight 3,5-aryl-substituted 1-phenyl-2-pyrazolines (5), where 3-aryl = 2-OH-C6H4 (5a-g) or Ph (5h), and 5-aryl = Ph (a, h), 1-naphthyl (b), 4-Br-C6H4 (c), 4-F-C6H4 (d), 4-OCH3-C6H4(e), 4-NO2-C6H4 (f), 4-(N(CH3)2)-C6H4(g). The UV-Vis absorption properties of 2-pyrazolines were evaluated in DCM, MeCN, AcOEt, EtOH, and DMSO as the solvent and showed a fluorescence shift for the polar aprotic solvents. The steady-state fluorescence emission exhibited a band in the blue region when excited at the least energetic transition of each compound, although the excited-state intramolecular proton (ESIPT) effect was not detected. In the solid state, compounds presented similar behavior regarding absorption and emission properties compared to the solution assays. With the electrochemical analyses performed for the synthesized 2-pyrazolines, it was possible to conclude that the redox potentials were influenced by the electronic and steric effects of the substituents on the aryl rings and, according to the electronic nature of the substituents, which electron-donating groups were favored. Finally, the TD-DFT analyses revealed that all compounds had delocalized electron density throughout the 2-pyrazolines unit and were not influenced by the substituent bonded at C-5. Nonetheless, LUMO orbital analysis showed that only derivatives 5b and 5f have this localized density over the substituents.

Photophysical, photostability, and ROS generation properties of new trifluoromethylated quinoline-phenol Schiff bases.

A new series of ten examples of Schiff bases, namely (E)-2-(((2-alkyl(aryl/heteroaryl)-4-(trifluoromethyl)quinolin-6-yl)imino)methyl)phenols 3, was easily synthesized with yields of up to 91% from the reactions involving a series of 2-(R-substituted) 6-amino-4-(trifluoromethyl)quinolines 1 and 4(5)-R1-substituted salicylaldehydes 2 - in which alkyl/aryl/heteroaryl for 2-R-substituents are Me, Ph, 4-MeC6H4, 4-FC6H4, 4-NO2C6H4, and 2-furyl, and R1-substituents are 5-NEt2, 5-OCH3, 4-Br, and 4-NO2. Complementarily, the Schiff bases showed low to good quantum fluorescence yield values in CHCl3 (Φf = 0.12-0.80), DMSO (Φf = 0.20-0.75) and MeOH (Φf = 0.13-0.85). Higher values of Stokes shifts (SS) were observed in more polar solvents (DMSO; 65-150 nm and MeOH; 65-130 nm) than in CHCl3 (59-85 nm). Compounds 3 presented good stability under white-LED irradiation conditions and moderate ROS generation properties were observed.

Ultrasound-assisted synthesis of pyrimidines and their fused derivatives: A review.

The pyrimidine scaffold is present in many bioactive drugs; therefore, efficient synthetic routes that provide shorter reaction times, higher yields, and site-selective reactions are constantly being sought. Ultrasound (US) irradiation has emerged as an alternative energy source in the synthesis of these heterocyclic scaffolds, and over the last ten years there has been a significant increase in the number of publications mentioning US in either the construction or derivatization of the pyrimidine core. This review presents a detailed summary (with 140 references) of the effects of US (synergic or not) on the construction and derivatization of the pyrimidine core through classical reactions (e.g., multicomponent, cyclocondensation, cycloaddition, and alkylation reactions). The main points that were taken into consideration are as follows: chemo- and regioselectivity issues, and the results of conventional heating methods compared to US and mechanistic insights that are also presented and discussed for key reactions.

7-Amine-spiro[chromeno[4,3-b]quinoline-6,1'-cycloalkanes]: Synthesis and cholinesterase inhibitory activity of structurally modified tacrines.

Five new examples of 9,10-chloro(bromo)-7-amine-spiro[chromeno[4,3-b]quinoline-6,1'-cycloalkanes] - in which cycloalkanes = cyclopentane, cyclohexane, and cycloheptane - were synthesized at yields of 42-56%, using a sequential one-pot two-step cyclocondensation reaction of three different scaffolds of 2-aminobenzonitriles and the respective spiro[chroman-2,1'-cycloalkan]-4-ones, and using AlCl3 as the catalyst in a solvent-free method. Subsequently, the five new spirochromeno-quinolines and nine quinolines previously published by us (14 modified tacrine scaffolds) were subjected to AChE and BChE inhibitory activity evaluation. The molecule containing a spirocyclopentane derivative had the highest AChE and BChE inhibitory activity (IC50 = 3.60 and 4.40 µM, respectively), and in general, the non-halogenated compounds were better inhibitors of AChE and BChE than the halogenated molecules. However, the inhibitory potency of compounds 3a-n was weaker than that of tacrine. By molecular docking simulations, it was found that the size of the spirocarbocyclic moieties is inversely proportional to the inhibitory activity of the cholinesterases, probably because an increase in the size of the spirocyclic component sterically hindered the interaction of tacrine derivatives with the active site of tested cholinesterases. The findings obtained here may help in the design and development of new anticholinesterase drugs.

Copper-Linked Rotaxanes for the Building of Photoresponsive Metal Organic Frameworks with Controlled Cargo Delivery.

We have prepared a photoresponsive metal-organic framework by using an amide-based [2]rotaxane as linker and copper(II) ions as metal nodes. The interlocked linker was obtained by the hydrogen bond-directed approach employing a fumaramide thread as template of the macrocyclic component, this latter incorporating two carboxyl groups. Single crystal X-ray diffraction analysis of the metal-organic framework, prepared under solvothermal conditions, showed the formation of stacked 2D rhombohedral grids forming channels decorated with the interlocked alkenyl threads. A series of metal-organic frameworks differing in the E/Z olefin ratio were prepared either by the previous isomerization of the linker or by postirradiation of the reticulated materials. By dynamic solid state 2H NMR measurements, using deuterium-labeled materials, we proved that the geometry of the olefinic axis of the interlocked struts determined the obtention of materials with different independent local dynamics as a result of the strength of the intercomponent noncovalent interactions. Moreover, the usefulness of these novel copper-rotaxane materials as molecular dosing containers has also been assayed by the diffusion and photorelease of p-benzoquinone, evaluated in different solvents and temperatures.

Supramolecular Similarity in Polymorphs: Use of Similarity Indices (IX).

A systematic investigation to assess the degree of similarity between polymorphs was carried out. A similarity indices (IX) approach was applied in ten series of polymorphs with different characteristics and number of molecules in the asymmetric unit. Geometric (ID), contact area (IC), and stabilization energy (IG) parameters were used. It was possible to situate each comparison in different regions of similarity within the polymorphism phenomenon and determine the boundaries between quasi-isostructural polymorphs and polymorphs of low similarity. The multiparameter IDCG index was used as a robust tool to determine the total similarity within the polymorphism phenomenon. The highest contribution of the stabilization energy parameter (45%) toward the final value of similarity (IDCG) was observed, followed by the contact area index (32%). The geometric index contributed approximately 23% to the final value of IDCG. This information reinforces the importance of the contact area and stabilization energy in assessing the degree of similarity between crystalline structures. A new descriptor (IQ) based on the comparison of the energetic contribution of intermolecular interaction types present in each crystal structure is presented. IQ can be a versatile tool and applicable even for systems that do not share any similarity.

Synthesis of N-Pyrrolyl(furanyl)-Substituted Piperazines, 1,4-Dizepanes, and 1,4-Diazocanes.

The synthetic potential of 5-bromo-1,1,1-trifluoro-4-methoxypent-3-en-2-one toward the catalyst-free synthesis of N-pyrrolyl(furanyl)-piperazines, 1,4-diazepanes, and 1,4-diazocanes through a telescoped protocol is reported. This three-component one-pot method provided 23 examples with high chemo- and regioselectivity at yields up to 96%.

Chemo- and regioselective reactions of 5-bromo enones/enaminones with pyrazoles.

Reaction of 5-bromo enones with pyrazoles provided a series of unexpected N,O-aminal derivatives, through a 1,4-conjugated addition at the ß-carbon of the 5-bromo enones instead of the expected nucleophilic substitution of the bromine. This reaction also furnished the 1,3-regioisomer of the pyrazole. A similar reaction of pyrazoles using 5-bromo enaminones furnished only N-alkylated pyrazoles-with high regioselectivity and at good yields-through nucleophilic substitution of the bromine.

Comment on 'Solution growth and thermal treatment of crystals lead to two new forms of 2-((2,6-dimethylphenyl)amino)benzoic acid' by R. Hu, Y. Zhoujin, M. Liu, M. Zhang, S. Parkin, P. Zhou, J. Wang, F. Yu and S. Long, RSC Adv., 2018, 8, 15459.

The study mentioned in the title of this comment article reports on two new polymorphic forms of 2-((2,6-dimethylphenyl)amino)benzoic acid, one with new X-ray diffraction data showing its crystal structure, and the other without. However, our investigation suggests that the newly reported crystal structure (Form II) is in fact the same structure previously reported (Form I), differing in how the structure refinement was performed. Herein, we demonstrated from the raw crystallographic data of Form I that both structures are the same, which invalidates the discovery of the new polymorph. In this comment article, we discuss point by point the findings reported by Long et al., as well as the fact that the report of the other polymorph (Form III) could present a broader investigation in order to assess its existence.

Effect of slight structural changes on the gelation properties of N-phenylstearamide supramolecular gels.

Supramolecular gels present several applications in which the gelator properties are closely dependent on their structure and solvent. Despite this, there are few studies on the effect of the gelation ability of gelators with slight molecular changes. Therefore, N-arylestearamides (in which aryl = phenyl (1), 4-tolyl (2) and 4-acetylphenyl (3)) were evaluated in different solvents. The critical gelefication concentration (CGC) values indicated that the substituents can significantly affect the concentration at which the supramolecular gels are formed, mainly in non-aromatic solvents (e.g. cyclohexane, acetonitrile and DMSO). From UV-Vis and DSC data, we verified that the gel-sol and sol-gel transitions (Tgel-sol and Tsol-gel) increase in the order of 1 < 2 < 3. Organogel strength was evaluated for 1-3 as a function of concentration and solvent type using rheology data. Gel strength is concentration-dependent and a strength order was found in acetonitrile, cyclohexane and DMSO, in which: 1 ∼ 2 > 3. Dynamic viscoelastic measurements as a function of temperature sweeps indicate a predominantly enthalpic contribution to the elasticity of the organogels formed from 1-3. Temperature-dependent 1H NMR indicates that NHO interactions may be responsible for the molecular association of molecules into 1D fibers, while 3D fibers were formed from van der Waals interactions.

Impact of Anions on the Partition Constant, Self-Diffusion, Thermal Stability, and Toxicity of Dicationic Ionic Liquids.

Partition constants (KD°), molecular dynamics (T1, T2, and DOSY measurements), thermal stability, and toxicity of dicationic ionic liquids (ILs) were determined. The dicationic ILs derived from 1,n-bis(3-methylimidazolim-1-yl)octane, [BisOct(MIM)2][2X] (in which X = Cl, Br, NO3, SCN, BF4, and NTf2), were evaluated to verify the influence of anion structure on the IL properties. A monocationic IL [Oct(MIM)][Br] was also monitored for comparison. In general, the solubility of the ILs followed the anion free energy of hydration (ΔG°hyd). The thermokinetic and thermodynamic functions of activation of the ILs were determined via thermogravimetric data, and it was observed that polyatomic anions influence the decomposition mechanism of these IL structures. Furthermore, [Oct(MIM)][Br] had a decomposition rate greater than that of the dicationic analogue, and the thermodynamic parameters of activation data corroborate these results. Finally, the dicationic ILs did not indicate toxic effects (LD50 > 40 mM).

Supramolecular Packing of a Series of N-Phenylamides and the Role of NH···O=C Interactions.

A series of seven N-phenylamides [R-C(O)NHPh, in which R: CH3, C(CH3)3, Ph, CF3, CCl3, CBr3, and H] were used as models in this study. Molecular packing and intermolecular interactions were evaluated by theoretical calculations, solution NMR, and quantum theory of atoms in molecules analyses. Crystallization mechanisms were proposed based on the energetic and topological parameters using the supramolecular cluster as demarcation. Concentration-dependent 1H NMR experiments corroborated the proposed interactions between molecules. For all compounds (except for R: H, which initially formed tetramers), layers (two-dimensional) or chains (one-dimensional) were formed in the first stage of the proposed crystallization mechanisms. The presence of strong intermolecular NH···O=C interactions promoted the first stages. The study in solution provided different values of association constant (K ass) governed by the hydrogen bond NH···O=C, showing that the stronger interactions are directly influenced by the substituent steric hindrance. A correlation between K ass(NH···O=C) from the solution and the NH···O=C interaction energy in the crystal showed a good trend.

Heteroassembly Ability of Dicationic Ionic Liquids and Neutral Active Pharmaceutical Ingredients.

Extensive investigation of interactions and aggregation properties of IL + API systems is necessary to apply ionic liquids (ILs) with different hydrophobic characteristics to drug delivery or in active pharmaceutical ingredient (API) formulations. Therefore, this study aims to investigate the heteroassembly between dicationic ILs ([BisOct(MIM)2][2X], in which X is Br or BF4, and [BisOct(BnIM)2][2Br]), both in the absence and the presence of neutral APIs (salicylic acid, ibuprofen, and paracetamol) with different functional groups. Isothermal titration calorimetry results demonstrate that IL-API associations occur at very low concentrations of IL. These results were reinforced by electrospray ionization mass spectrometry with variable collision-induced dissociation, in which the IL dication interactions with APIs were detected. The strength of the dication-API interaction was determined from E cm,1/2 data. The aggregation parameters (cac, ΔG agg °, and K) between ILs and APIs were evaluated by conductivity. The 1H NMR data showed that differences in chemical shifts provided relevant insights about interaction sites in both components.

Insights on the Similarity of Supramolecular Structures in Organic Crystals Using Quantitative Indexes.

The quest for concepts of isostructurality in organic crystals has been long and mostly based on geometric data, even with the development of modern software. This field of study is of great interest to the pharmaceutical industry and for the prediction of crystal structures. Despite this, there is still no methodology that provides broad quantitative and comparable similarity data between two complete crystalline structures. The present study demonstrated that the similarity between two crystalline structures could be estimated from the similarity between the two "supramolecular clusters". Quantitative indexes for similarity comparisons of crystal structures were shown using nine 5-aryl-1-(1,1-dimethylethyl)-1H-pyrazoles as a model. This proposal includes the quantitative data of a geometric parameter (I D), a contact area parameter (I C), and an energetic parameter (I G). The proposed indexes exhibited good perspective regarding the similarity data and distinct regions of similarity. The range of similarity was set at I X ≥ 0.80, 0.80 > I X > 0.60, and I X ≤ 0.60 (X = D, C, or G). Indexes with a value near 1.0 indicate systems with isostructural, isocontact, and isoenergetic behavior. The results indicated that supramolecular structures with high similarity must have high values for all three indexes (I D, I C, and I G).