RESUMEN
Three-dimensionally ordered nanoporous structures were generated in carbon materials doped with metals and nitrogen as catalytically active sites for electrochemical reactions. Free-base and metal phthalocyanines with a strategically designed molecular structure were used as carbon sources to obtain an ordered porous structure via homogeneous self-assembly with Fe3O4 nanoparticles as the pore template and the prevention of melting away during carbonization. The doping of Fe and nitrogen was achieved by a reaction between the free-base phthalocyanine and Fe3O4 through carbonization at 550 °C, while Co and Ni were doped using the corresponding metal phthalocyanines. The preference of these three types of ordered porous carbon materials for catalytic reactions was distinctly determined by the doped metals. Fe-N-doped carbon showed the highest activity for O2 reduction. Additional heat treatment at 800 °C enhanced this activity. CO2 reduction and H2 evolution were preferred by the Ni- and Co-N-doped carbon materials, respectively. A change in the template particle size was capable of controlling the pore size to enhance mass transfer and improve performance. The technique presented in this study enabled systematic metal doping and pore size control in the ordered porous structures of carbonaceous catalysts.
Asunto(s)
Carbono , Nitrógeno , Carbono/química , Nitrógeno/química , Porosidad , Metales , CatálisisRESUMEN
A wide range of diseases, including cancer, autoimmune diseases, or neurodegenerative diseases, have been associated with single nucleotide mutations in their causative genes. Clustered regularly interspaced short palindromic repeats/CRISPR-associated protein 9 (CRISPR/Cas9) system is a flexible and efficient genome engineering technology widely used for researches and therapeutic applications which offers immense opportunity to treat genetic diseases. The complex of Cas9 and the guide RNA acts as an RNA-guided endonuclease. Cas9 recognizes a sequence motif known as a protospacer adjacent motif (PAM), and then the guide RNA base pairs with its proximal target region of 20 nucleotides with sequence complementarity. Here we describe the procedure named single nucleotide polymorphism-distinguishable (SNPD)-CRISPR system which can suppress or enhance the expression of disease-causative gene with single nucleotide mutation distinguished from its wild-type. In this study, we used HRAS, one of most famous cancer-causative genes, as an example of a target gene.
Asunto(s)
Sistemas CRISPR-Cas , Polimorfismo de Nucleótido Simple , Sistemas CRISPR-Cas/genética , ARN/genética , Nucleótidos , Expresión GénicaRESUMEN
While the functions of carbon materials with precisely controlled nanostructures have been reported in many studies, their chiral discriminating abilities have not been reported yet. Herein, chiral discrimination is achieved using helical carbon materials devoid of chiral attachments. A Fe3O4 nanoparticle template with ethyl cellulose (carbon source) is self-assembled on dispersed multiwalled carbon nanotubes (MWCNTs) fixed in a lamellar structure, with helical nanoparticle alignment induced by the addition of a binaphthyl derivative. Carbonization followed by template removal produces helically aligned fused carbon hollow nanospheres (CHNSs) with no chiral molecules left. Helicity is confirmed using vacuum-ultraviolet circular dichroism spectroscopy. Chiral discrimination, as revealed by the electrochemical reactions of binaphthol and a chiral ferrocene derivative in aqueous and nonaqueous electrolytes, respectively, is attributable to the chiral space formed between the CHNS and MWCNT surfaces.
RESUMEN
Interest in chiral substances has mainly focused on the substances themselves, but not on the accompanying space, especially regarding the pore alignment. As a method to form both the chiral substance and the accompanying space, cylindrical self-assembly of uniform polystyrene nanoparticles with fructose is carried out in the presence of both carbon and sodium alginate, which is followed by heat treatment in an inert atmosphere. The carbonization generates fructose-derived honeycomb-like carbon walls with helically aligned nanopores left after the polystyrene decomposition. The diffuse reflectance circular dichroism measurements give peaks with opposite signs for the d- and l-fructose-derived cylindrical carbons. Circularly polarized light sensitivity in transient photoconductivity is confirmed apparently in the carbon-based helical structures. This sensitivity as well as straightforward formation of composites with another component to give helicity shows potential applications of the helically aligned pores.
RESUMEN
Facile and efficient methods to prepare active electrodes for redox reactions of electrolyte ions are required to produce efficient and low-cost redox flow batteries (RFBs). Carbon-fiber electrodes are widely used in various types of RFBs and surface oxidation is commonly performed to enhance the redox reactions, although it is not necessarily efficient. Quite recently, a technique for nanoscale and uniform surface etching of the carbon fiber surface was developed and a significant enhancement of the negative electrode reaction of vanadium redox flow batteries was attained, although the enhancement was limited to the positive electrode reaction. In this study, we attempted to obtain an additional enhancement effect of metal-oxide nanoparticles without the need for further processing steps. A coating with carbonaceous thin films was obtained coating by sublimation, deposition, and pyrolysis of tin(II) phthalocyanine (SnPc) on a carbon fiber surface in a single heat-treatment step. The subsequent thermal oxidation concurrently achieved nanoscale surface etching and loading with SnO2 nanoparticles. The nanoscale-etched and SnO2-loaded surface was characterized by field-emission scanning electron microscopy (FESEM), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). The activity for the vanadium ion redox reactions was evaluated by cyclic voltammetry (CV) to demonstrate the enhancement of both the positive and negative electrode reactions. A full cell test of the vanadium redox flow battery (VRFB) showed a significant decrease of the overpotential and a stable cycling performance. A facile and efficient technique based on the nanoscale processing of the carbon fiber surface was presented to substantially enhance the activity for the redox reactions in redox flow batteries.
RESUMEN
Genomic engineering using clustered regularly interspaced short palindromic repeats (CRISPR) and CRISPR-associated (Cas) protein is a promising approach for targeting the genomic DNA of virtually any organism in a sequence-specific manner. Recent remarkable advances in CRISPR/Cas technology have made it a feasible system for use in therapeutic applications and biotechnology. In the CRISPR/Cas system, a guide RNA (gRNA), interacting with the Cas protein, recognizes a genomic region with sequence complementarity, and the double-stranded DNA at the target site is cleaved by the Cas protein. A widely used gRNA is an RNA polymerase III (pol III)-driven single gRNA (sgRNA), which is produced by artificial fusion of CRISPR RNA (crRNA) and trans-activation crRNA (tracrRNA). However, we identified a TTTT stretch, known as a termination signal of RNA pol III, in the scaffold region of the sgRNA. Here, we revealed that sgRNA carrying a TTTT stretch reduces the efficiency of sgRNA transcription due to premature transcriptional termination, and decreases the efficiency of genome editing. Unexpectedly, it was also shown that the premature terminated sgRNA may have an adverse effect of inducing RNA interference. Such disadvantageous effects were avoided by substituting one base in the TTTT stretch.