RESUMEN
Opto-chemical sensors are the most significant type of sensors that are widely used to detect a variety of volatile organic compounds and chemicals. This research work demonstrates the fabrication and characterization of an opto-chemical sensor based on a graphene thin film. A 300 nm graphene thin film was deposited on clean glass with the help of RF magnetron sputtering. The structure, surface and quality of the graphene thin film were characterized using XRD, SEM and Raman spectroscopy. For optical characterization, the thin film was exposed to IPA, acetone and toluene (separately) for five, ten and fifteen minutes. The optical transmission was then observed via UV-NIR spectroscopy in the near-infrared range (900 to 1450 nm). The thin film of graphene has expressed a sharp response time and recovery time with high sensitivity for each chemical. However, by comparing the output of the graphene thin film in response to each chemical, it was observed that graphene thin film has a better transmission and sensing rate for exposure to toluene.
RESUMEN
Tactile sensors are widely used in the electronic industry. In the following research work, we proposed a tactile sensor based on indium zinc oxide (IZO) electrodes and used neutrosophic statistics to analyze the capacitance and resistance of the tactile sensor. The tactile sensor was fabricated by depositing the IZO electrodes on a polycarbonate substrate (a thin layer). The IZO was characterized through X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), and ultraviolet-visible (UV-vis) spectroscopy techniques. The sensor's electrical properties were characterized using an LCR meter, i.e., capacitance and resistance were measured in intervals with respect to changes in the applied force on the sensor at 1 kHz operational frequency. The sensor expressed high sensitivity with quick response and recovery times. The sensor also expressed long-term stability. For the analysis of capacitance and resistance, two statistical approaches, i.e., classical and neutrosophic approaches, were applied, and the better analysis approach for the sensor was found.
RESUMEN
Graphene is a 2D material with remarkable properties. The present study demonstrates the fabrication of a graphene-based sensor for measuring the temperature and humidity of a metal body. The graphene sensor was fabricated by depositing a thin film of graphene nanoparticles between silver electrodes (separated by â¼50 µm) on a glass substrate. The graphene thin film was characterized by XRD, Raman spectroscopy and UV-vis techniques. The capacitance and resistance for both the relative humidity (in the range of 0-100% RH) and temperature (in the range of 230-310 K) were measured using an LCR meter at 1 kHz in a controlled chamber. The graphene-based sensor expressed high sensitivity with fast response and recovery times for both humidity and temperature with long stability and low hysteresis curves. The sensor was also tested on a metal body, which expressed a good response time. Moreover, the measured data of capacitance and resistance was analyzed with classical and neutrosophic analysis as an application of modern material statistics. It was observed that neutrosophic analysis is more flexible for analyzing the capacitance and resistance of the fabricated sensor.
RESUMEN
The use of flexible electronic devices in different applications of Internet of Things, especially in robot technology, has gained importance to measure different physical factors such as temperature. Moreover, there is a need for a flexible and more informative approach to analyse the data. In this study, we report two flexible temperature sensors based on reduced graphene and multi-walled carbon nanotubes with high sensitivity and quick response and recovery times. The electrical properties of the sensors were studied using an LCR meter associated with a controlled chamber at 1 kHz. We used both classical and neutrosophic methods for analyzing the measured data of temperature sensors and found the more effective method by comparing their methods of analysis.
