RESUMEN
The COVID-19 pandemic impacted all areas of daily life, including medical care. Unfortunately, to date, no specific treatments have been found for the cure of this disease, and therefore, it is advisable to implement all possible strategies to prevent infection. In this context, it is important to better define the role of all behaviors, in particular nutrition, in order to establish whether these can both prevent infection and improve the outcome of the disease in patients with COVID-19. There is sufficient evidence to demonstrate that immune response can be weakened by inadequate nutrition. Nutrition management and treatment are very important to enhance the immune response of an infected person against RNA viral infection. A complete nutritional assessment should include anthropometric, dietary, and laboratorial assessment, as well as a multidisciplinary discussion about the patient's clinical condition. In this way, it is possible to establish an individualized nutritional approach to contribute to improving clinical and nutritional prognoses. From this point of view, diet, through intake of vitamins and trace elements and maintaining adequate functioning of the intestinal barrier, can reduce the severity of the COVID-19 infection. In this study, we provide an overview of the effects of diet on COVID-19 infection in non-cancer patients. This notion needs to be further evaluated, and thus, identification, characterization, and targeting of the right nutrition principles related to the management of patients with COVID-19 are likely to improve outcomes and may prevent the infection or lead to a cure.
RESUMEN
Mast cells (MCs) are derived from hematopoietic progenitors, mature in vascularized tissues, and participate in innate and acquired immunity. Neuroinflammation is a highly debated topic in the biomedical literature; however, the impact of tumor necrosis factor (TNF) and IL-33 on MCs in the brain has not been widely addressed. MCs can be activated by IgE binding to FcεRI, as well as by different antigens. After activation, MCs mediate various immunological and inflammatory responses through TNF and IL-33. TNF has two receptors: TNFR1, a p55 molecule, and TNFR2, a p75 molecule. This cytokine is the only one of its kind to be stored in the granules of MCs and can also be generated by de novo synthesis via mRNA. In the central nervous system (CNS), TNF is produced almost exclusively by microglial cells, neurons, astrocytes, and, minimally, by endothelial cells. After its release into brain tissue, TNF rapidly induces the adhesion molecules endothelial leukocyte adhesion molecule 1 (ELAM-1), intercellular adhesion molecule 1 (ICAM-1), and vascular cell adhesion molecule 1 (VCAM-1) in endothelial cells. TNF causes the chemoattraction of neutrophils by inducing several molecules, including CXC chemokines (IL-8). Both MCs and microglial cells act as a primary barrier against foreign molecules in the CNS, producing pro-inflammatory cytokines such as IL-33. IL-33 belongs to the IL-1 family, is activated through the ST2L/IL1-RAcP receptor complex, and mediates both the innate and adaptive immune response. IL-33 is a nuclear transcription factor expressed in the brain, where it induces pro-inflammatory cytokines (TNF and IL-1) and chemokines (CCL2, CCL3, CCL5, and CXCL10). Therefore, MCs and microglia in the CNS are a source of pro-inflammatory cytokines, including TNF and IL-33, that mediate many brain diseases. The inhibition of TNF and IL-33 may represent a new therapeutic approach that could complement existing neuroinflammatory therapies.
Asunto(s)
Citocinas , Enfermedades Neuroinflamatorias , Humanos , Citocinas/metabolismo , Mastocitos/metabolismo , Interleucina-33/metabolismo , Células Endoteliales/metabolismo , Factor de Necrosis Tumoral alfa/metabolismo , Molécula 1 de Adhesión Intercelular/metabolismo , Interleucina-1/metabolismoRESUMEN
BACKGROUND: Periodontal disease poses a significant global health challenge. Traditional treatments focus on reducing inflammation and bacterial load, yet novel approaches are continually being investigated. Recent research suggests that IL-37, a potent anti-inflammatory cytokine, may play a crucial role in modulating the inflammatory processes associated with periodontal disease. In conjunction with IL-37, low-level laser therapy (LLLT) has gained attention for its potential in promoting tissue repair, reducing inflammation, and enhancing cellular processes. This study aims to investigate the effects of LLLT on IL-37 in periodontal disease management. METHODS: Thirty patients were enrolled: the G1 group patients were treated with only scaling and root planning-SRP, the G2 group was treated with SRP and LLLT. Before treatment (T0) all periodontal probing pocket depth and bleeding on probing were obtained. Before (T0) and 10 (T1), 30 (T2) and 60 (T3) days after treatment, was achieved plaque sample and specimens of gingival crevicular fluid. Diode laser wavelength range was used between 600-1000 nm and 0.04-60 J/cm2 energy density for 3-s spotlights. RESULTS: In all patients PPD, BOP and IL-37 have shown healing improved parameters. CONCLUSIONS: Although LLLT is widely recommended for its biostimulatory and anti-inflammatory roles, it only showed additional short-term merits in reducing the pocket depth after conventional SRP. Its long-term adjunctive benefits remain unclear. Future RCTs with better study designs, adequate sample power and longer durations of follow-up are required to assess the effectiveness of LLLT as an adjunctive treatment strategy in patients with periodontal disease.
Asunto(s)
Periodontitis Crónica , Raspado Dental , Interleucina-1 , Terapia por Luz de Baja Intensidad , Humanos , Terapia por Luz de Baja Intensidad/métodos , Periodontitis Crónica/radioterapia , Periodontitis Crónica/terapia , Periodontitis Crónica/inmunología , Interleucina-1/metabolismo , Masculino , Femenino , Adulto , Raspado Dental/métodos , Persona de Mediana Edad , Aplanamiento de la Raíz/métodos , Líquido del Surco Gingival/químicaRESUMEN
OBJECTIVES: The aim of this study was to evaluate the clinical performance and possible complications of single zirconia crowns fabricated using an intraoral digital computer-aided design-computer-aided manufacturing (CAD-CAM) protocol in normal and dysfunctional patients after 3 years of follow-up. MATERIALS AND METHODS: Seventy patients were included in this study. The teeth were prepared with a knife-edge marginal design, and temporary crowns were placed. Digital impressions were taken using optical scanning, and the frameworks were milled using the same technology. The veneering process was performed by the same dental technician. The occlusal corrections were made before cementation. The outcomes were evaluated in terms of survival, failures, and complications. The marginal adaptation of the crowns was also assessed. RESULTS: The digital protocol for single zirconia crowns resulted in satisfactory outcomes, with high rates of survival and minimal complications after 3 years of follow-up. The marginal adaptation of the crowns was excellent, with 93% of the restorations achieving the ideal marginal adaptation, while 7% had minor deviations. Parafunctions were found in 41.9% of the prosthetic rehabilitation, but no significant differences were observed between the normal and dysfunctional groups regarding the survival and complications of the crowns. CONCLUSION: The digital protocol for single zirconia crowns is a reliable and predictable treatment option, even for patients with parafunction, when proper occlusal corrections are performed before cementation. The use of intraoral digital CAD-CAM technologies with optical impressions can simplify procedures, reduce the workflow time, and minimize the variables linked to the human factor.
RESUMEN
Following tooth extraction, the alveolar ridge undergoes morphological and dimensional changes, including a clot formation that is gradually replaced by granulation tissue. Studies indicate that both horizontal and vertical ridge dimensions decrease after extraction; however, these changes can be mitigated through grafting with biomaterials and barrier membranes. Alveolar ridge preservation (ARP) techniques are employed to counteract bone resorption postextraction, encompassing periosteal inhibition and modified periosteal inhibition (MPI) techniques. The Degidi clot chamber technique offers a means to achieve biomaterial-free extraction sockets, promoting healing and osteointegration. This study aims to present the first rehabilitation of a postextraction dental implant in the maxilla using an innovative ARP procedure via a MPI technique. The technique does not involve autologous or heterologous grafting materials; instead, a cortical lamina and a customized screw are used in conjunction with the blood clot. The primary objective is to protect the vestibular cortical bone from preosteoclastic aggression, which can trigger bone resorption. The technique employs a 0.5-mm cortical lamina to mechanically shield the vestibular cortical bone, preventing vestibular cortical bone resorption and increasing its thickness without the need for biomaterial insertion, relying on the blood clot. The effectiveness of the technique was assessed through a 12-month postimplantation cone-beam computed tomography scan, revealing a 0.5-mm increase. Although based on a single case, the 1-year follow-up results are promising, and further studies are warranted to validate the technique's efficacy.
RESUMEN
Several studies have already demonstrated the biocompatibility of a tooth as a grafting material in the regeneration of bone tissue, showing its osteoconductive potential, while no studies have verified whether the osteoinductive potential of a tooth remains constant or is altered after its treatment with the Tooth Transformer (TT) device. The aim of the study was to demonstrate that the treatment with the TT device did not alter the osteoinductivity of an extracted tooth that was stored dry. Twelve extracted human teeth were collected from real patients. Caries, tartar and filling materials were removed from each tooth; each tooth was coarsely cut and stored at room temperature (RT) until use. Each sample was shredded, demineralized and disinfected, using the TT device. Protein extraction was carried out for each sample, and Western Blot analysis was performed to test the presence of mineralization protein LIM-1 and transforming growth factor-ß. The presence of the human Bone Morphogenetic Protein 2 (BMP-2) and human collagen Type I (COL-I) was found in dry tooth samples processed with the TT device and subjected to Enzyme-Linked Immunosorbent Assay (ELISA) testing. The treatment of chemical demineralization using the TT device does not alter the osteoinductive potential of a dry tooth.
Asunto(s)
Proteínas Morfogenéticas Óseas , Factor de Crecimiento Transformador beta , Humanos , Regeneración Ósea , Colágeno Tipo I , Western BlottingRESUMEN
Alveolar ridge preservation (ARP) is a well-documented procedure to maintain bone volume after tooth extraction in order to place implants. However, at the end of the healing process, the residual biomaterial that is not reabsorbed remains embedded in the bone over time. Ribose cross-linked biomaterials demonstrated their ability to promote osteoconduction and complete resorption. The aim of this study was to evaluate the histological healing pattern of a novel ribose cross-linked collagen sponge used as a grafting material left exposed in human sockets at the time of tooth extraction. On a single patient, non-restorable lower first molars were extracted on both sides, and a ribose cross-linked collagen sponge was placed bilaterally in the cavities and left uncovered at the end of the surgery. After six months, core biopsies were taken immediately prior to implant placement; after the sample preparation, a histological analysis was performed. The results are very promising for substitution with newly formed bone and the amount of residual material. Ribose cross-linked collagen sponge could represent a valid alternative to conventional biomaterials for ARP procedures with no need for flap advancement and/or the addition of a membrane to cover the graft, reducing the invasiveness, complexity, and costs of the treatment.
RESUMEN
PURPOSE: To retrospectively evaluate the influence of prosthetic features on marginal bone level changes around bone-level implants with an external hex connection. MATERIALS AND METHODS: A total of 100 patients with 166 implants and cemented crowns were included. Demographic and clinical data were collected. Prosthetic features were radiographically evaluated, including emergence angle (EA), emergence profile (EP), crown-implant ratio (CIR), and abutment height. Marginal bone levels were measured on intraoral radiographs taken at baseline and after at least 1 year. The correlation between prosthetic features and marginal bone loss (MBL) was then investigated. RESULTS: The mean follow-up time was 43.94 months. Implant length varied between 5 and 13 mm. The mean height of the abutments used was 1.55 mm. EA measured an average 30.62 degrees (± 13.20) mesially and 29.45 degrees (± 13.07) distally. The CIR was 0.99 (± 0.26). The mean MBL was 0.19 mm on the mesial side and 0.20 mm on distal side of the implants. Significant positive associations emerged between MBL and implant length (P < .005) and with EA (P < .05). A convex profile of the crown was shown to be associated with a higher distal MBL (P = .025) compared to concave and straight profiles.
Asunto(s)
Pérdida de Hueso Alveolar , Implantes Dentales , Humanos , Estudios Transversales , Estudios Retrospectivos , Pérdida de Hueso Alveolar/diagnóstico por imagen , Pérdida de Hueso Alveolar/etiología , Implantación Dental Endoósea , Coronas , Prótesis Dental de Soporte ImplantadoRESUMEN
In the last forty years, dental implantology has become a widespread worldwide clinical practice in medicine, able to rehabilitate partial or full human edentulism of the jaw and highly successful over the long term [...].
RESUMEN
The use of ytterbium laser to obtain colored titanium surfaces is a suitable strategy to improve the aesthetic soft tissue results and reduce implant failures in oral rehabilitation. To investigate the relationship between novel laser-colored surfaces and peri-implant soft tissues, Human Gingival Fibroblasts (HGFs) were cultured onto 12 colored titanium grade 1 light fuchsia, dark fuchsia, light gold, and dark gold disks and their viability (MTT Assay), cytotoxicity (lactate dehydrogenase release), and collagen I secretion were compared to the machined surface used as control. Optical and electronic microscopies showed a HGF growth directly correlated to the roughness and wettability of the colored surfaces. A higher viability percentage on dark fuchsia (125%) light gold (122%), and dark gold (119%) samples with respect to the machined surface (100%) was recorded. All specimens showed a statistically significant reduction of LDH release compared to the machined surface. Additionally, a higher collagen type I secretion, responsible for an improved adhesion process, in light fuchsia (3.95 µg/mL) and dark gold (3.61 µg/mL) compared to the machined surface (3.59 µg) was recorded. The in vitro results confirmed the innovative physical titanium improvements due to laser treatment and represent interesting perspectives of innovation in order to ameliorate aesthetic dental implant performance and to obtain more predictable osteo and perio-osteointegration long term implant prognosis.
RESUMEN
A 12-month prospective consecutive case series study was conducted to evaluate the effectiveness of a novel porcine collagen matrix to correct moderate to severe buccogingival recession defects. A total of 10 healthy patients (8 women and 2 men; age range: 30 to 68 years) with 26 maxillary and mandibular recession gingival defects > 4 mm deep were included. Healthy maturation of gingival tissues with natural color and texture matching the adjacent soft tissue areas were observed at all reevaluation visits. Complete root coverage was not achieved in all cases, possibly due to severe buccal bone loss in most of the selected cases, which negatively impacted the results. Nevertheless, when a novel porcine collagen matrix was used, a mean root coverage of 63.15% was achieved, and gains in clinical attachment level and keratinized tissue height were seen. Future randomized clinical trials are needed to further explore the potential of porcine collagen matrix for treatment of localized gingival recession defects.
Asunto(s)
Recesión Gingival , Masculino , Animales , Porcinos , Humanos , Femenino , Adulto , Persona de Mediana Edad , Anciano , Recesión Gingival/cirugía , Resultado del Tratamiento , Estudios Prospectivos , Colgajos Quirúrgicos , Raíz del Diente , Encía/cirugía , Colágeno/uso terapéutico , Tejido ConectivoRESUMEN
Mast cells (MCs) are tissue cells that are derived from bone marrow stem cells that contribute to allergic reactions, inflammatory diseases, innate and adaptive immunity, autoimmunity, and mental disorders. MCs located near the meninges communicate with microglia through the production of mediators such as histamine and tryptase, but also through the secretion of IL-1, IL-6 and TNF, which can create pathological effects in the brain. Preformed chemical mediators of inflammation and tumor necrosis factor (TNF) are rapidly released from the granules of MCs, the only immune cells capable of storing the cytokine TNF, although it can also be produced later through mRNA. The role of MCs in nervous system diseases has been extensively studied and reported in the scientific literature; it is of great clinical interest. However, many of the published articles concern studies on animals (mainly rats or mice) and not on humans. MCs are known to interact with neuropeptides that mediate endothelial cell activation, resulting in central nervous system (CNS) inflammatory disorders. In the brain, MCs interact with neurons causing neuronal excitation with the production of neuropeptides and the release of inflammatory mediators such as cytokines and chemokines. This article explores the current understanding of MC activation by neuropeptide substance P (SP), corticotropin-releasing hormone (CRH), and neurotensin, and the role of pro-inflammatory cytokines, suggesting a therapeutic effect of the anti-inflammatory cytokines IL-37 and IL-38.
Asunto(s)
Citocinas , Mastocitos , Neuropéptidos , Animales , Humanos , Ratones , Ratas , Citocinas/fisiología , Inflamación , Mastocitos/efectos de los fármacos , Mastocitos/fisiología , Sustancia P , Factor de Necrosis Tumoral alfa , Neuropéptidos/farmacología , Neuropéptidos/fisiologíaRESUMEN
Among the common procedures in clinical practice in the field of dentistry is prosthetic rehabilitation through the insertion of dental implants. In order to obtain the best aesthetic and functional results, the oral surgeon who deals with implantology must be able to position the dental implants correctly; a crucial role is therefore played by the diagnostic and treatment planning phases, where attention must be paid to anatomical constraints and prosthetic constraints in the alveolar bone site. The parameters, such as bone quality, bone volume, and anatomical restrictions, can be processed and simulated using implant planning software. The simulation of the virtual positioning of the implant can lead to the construction of a three-dimensional model of the implant positioning guide, which can be used during the implant surgery. The aim of this systematic review is to evaluate survival rates, early and late failure rates, peri-implant bone remodeling, and possible implant-prosthetic complications related to implants placed using digitally designed surgical guides. This systematic review was written following the indications of PRISMA and envisaged the use of 3 databases: Scopus, PubMed, and Cochrane Library. Results: Only 9 of the 2001 records were included, including 2 retrospective studies and 7 prospective studies. Conclusion: On the basis of the studies selected in this review, it can be seen that the implant survival obtained with the use of guided implant surgery shows high percentages. Many recorded failures occurred early, due to a lack of osseointegration, and the variables that come into play in the survival of the implants are many.
RESUMEN
This study evaluated bone behavior during dynamic osseointegration. A total of 12 implants were placed in sheep tibia and analyzed at 15, 30, 60, and 90 days. Quantitative and qualitative bone behaviors were evaluated with histologic, histomorphometric, Alizarin Red S, and SEM-EDX (scanning electron microscopy with energy-dispersive x-ray spectroscopy) analysis. Twenty microanalyses were performed in chambers 1, 3, and 5 (a chamber is the distinctive space/bone volume between two coils of the implant screw) in distinctive zones: the titanium-bone interface (zone A), the middle chamber-bone front (zone B), the bone-surgical threading interface (zone C), and native bone (zone D; used as a control). The dynamic osseointegration index (DOI) and bone quality index (BQI) with calcium/phosphorus (Ca/P) content were detected to evaluate the osseointegration quality, bone-to-implant contact (BIC), and bone density around implants. At 15 days, initial bone formation with osteoid matrix deposition and different color intensities were observed (means: BIC = 23.3% ± 3.9%; DOI = 1.55). SEM-EDX analysis showed low mineralized bone/bone marrow with a very low Ca/P mean value. At 30 days, high new bone deposition with higher color intensity in the crestal portion was recorded (BIC = 77.3% ± 0.4%; DOI = 2.58). At 90 days, tight BIC to the middle and apical implant portions were detected, as well as several osteon structures in the crestal portion (BIC = 86.4% ± 0.6%; DOI = 0.96). During all observed time periods, the BQI showed 25% more Ca/P in zone A. Greater maturation degree and lower BQI were seen at zone A compared to the other zones. After 15 and 30 days, zones B and C (except for P in zone B) showed BQIs slightly over 50% and around 75%, respectively, confirming a progressively higher degree of bone maturation that proceeds with the osseointegration process. After 90 days, the BQI values of zones B and C (greater than 70% in zone B and around 90% in zone C) confirmed the bone mineralization and maturation process and an acceleration of implant osseointegration, while a lower BQI value (25%) was recorded in zone A. This study shows osseointegration as a variable dynamic process with a higher bone deposition in contact with the implant surface during the early phase, while in the active and later osseointegration times, the bone quality maturation showed higher values only "at distance" (growth of native bone to the implant surface, observed later in the osseointegration process). After 3 months (before loading), the BQI evaluation was lower (25%) in zone A, confirming that the healing and maturation process of the bone cannot be considered complete.
Asunto(s)
Productos Biológicos , Implantes Dentales , Animales , Ovinos , Oseointegración , Propiedades de Superficie , Densidad Ósea , Titanio/químicaRESUMEN
Oxidative stress is a major cellular and metabolic burden that can really alter cell life and become the base for disease onset and development. Many widespread pathologies can develop from an unresolved oxidative stress situation; thus, addressing this state is paramount for human health. Our antioxidant enzymes sometimes are not just enough. Fortifying our defense and the antioxidant and anti-inflammatory system can make a difference in our health: if this is attainable with our dietary habits, it could be a dream come true. Polyphenols are a fantastic tool indeed in the fight against oxidative stress: they are easy to obtain, with little cost, no side effects, and have a multitude of metabolic actions. This perspective review would shed light on polyphenol's metabolic and molecular action regarding oxidative stress to help preserve our health.
Asunto(s)
Antioxidantes , Estrés Oxidativo , Humanos , Antioxidantes/farmacología , Polifenoles/farmacología , Polifenoles/uso terapéutico , Antiinflamatorios/farmacologíaRESUMEN
The COVID-19 pandemic caused by SARS-CoV-2 remains a significant issue for global health, the economy, and society. When SARS-CoV-2 began to spread, the most recent serious infectious disease of this century around the world, with its high morbidity and mortality rates, it is understandable why such infections have generally been spread in the past, mainly from international travel movements. This perspective review aimed to provide an update for clinicians on the recent developments related to the microbiological perspectives in pandemics, diagnostics, prevention (such as the spread of a virus), vaccination campaigns, treatment options, and health consequences for COVID-19 based on the current literature. In this way, the authors attempt to raise awareness on the transversal nature of these challenges by identifying the main risk/vulnerability factors that the scientific community must face including our current knowledge on the virus capacity of the mechanism of entry into the cells, the current classifications of viral variants, the knowledge of the mathematical model on the spread of viruses (the possible routes of transmission), and the effectiveness of vaccination campaigns in a global context of pandemic, particularly from COVID-19, with a look at new or future vaccines.
Asunto(s)
COVID-19 , COVID-19/epidemiología , COVID-19/prevención & control , Salud Global , Humanos , Programas de Inmunización , Pandemias/prevención & control , SARS-CoV-2 , VacunaciónRESUMEN
After immediate tooth extraction or after alveolar socket healing, tooth transplants are increasingly used for functional restoration of edentulous maxillary areas. Recent studies have shown the periodontal ligament (PDL) viability and the tooth housing time in the adapted neo-alveolus as key factors for transplantation success. During surgical time, 3D stereolithographic replicas are used for fitting test procedures. In this paper, the accuracy of 3D dental replicas, compared with the corresponding natural teeth, is assessed in surgical transplantation. Lamb skulls were selected and submitted to Cone Beam Computer Tomography (CBCT). Scanning information, converted into Standard Digital Imaging and Communications in Medicine (DICOM) and Standard Triangulation Language (STL), was sent to the Volux X-ray Centre for 3D replica printing. After the tooth extractions, all lambs' incisors were measured with a digital caliber and compared with the 3D replicas. Volume and dimensional error values were evaluated. All replicas showed macroscopically smaller volume (45.54%). Root replicas showed higher variations compared with the crown areas, with several unreplicated apical root areas. The cement-enamel junction tooth area was replicated quite faithfully, and the base area relative error showed 9.8% mean value. Even further studies with a larger number of replicas are needed. Data obtained confirmed high volumes of macroscopic discrepancies with several unreproduced apical root sites. The achieved accuracy (90.2%) confirmed that the 3D replicas cannot be used to reduce the surgical time during transplantation predictable procedures.
RESUMEN
In thirteen different dental clinics in Singapore, Spain, Czech Republic and Italy, 504 patients were selected, and 483 dental implants were placed in maxillary sites after alveolar socket preservation (ASP) procedures with an autologous demineralized tooth extracted as graft material from an innovative Tooth Transformer device was obtained. All procedures used were reported in n°638 Ethical Committee surgical protocol of University of Chieti and approved. After 4 months, at dental implant placing, bone biopsies were performed to evaluate the histologic outcomes, and 12 months after implant loading, global implant survival rate, failure percentage and peri-implant bone loss were detected. After ASP, only 27 post-operative complications were observed and after 4 months, bone biopsy histomorphometric analysis showed a high percentage of bone volume (BV) 43.58 (±12.09), and vital new bone (NB) 32.38 (±17.15) with an absence of inflammation or necrosis areas. Twelve months after loading, only 10 dental implants failed (2.3%), with a 98.2% overall implant survival rate, nine cases showed mucositis (1.8%) and eight showed peri-implantitis (1.6%). At mesial sites, 0.43 mm (±0.83) of bone loss around the implants was detected and 0.23 mm (±0.38) at the distal sites with an average value of 0.37 mm (±0.68) (p > 0.568). Several studies with a longer follow-up will be necessary to confirm the preliminary data observed. However, clinical results seem to suggest that the post-extraction socket preservation procedure using innovative demineralized autologous tooth-derived biomaterial may be a predictable procedure to produce new vital bone able to support dental implant rehabilitation of maxilla edentulous sites.
RESUMEN
PURPOSE: Wound healing of postextraction sockets is a complex process that permits to reach the bone reformation in about 3 months, and that could be characterized by the presence of some complications, mainly dependent on the duration of the surgery. The aim of this study is to evaluate the impact of photobiomodulation (PBMT) on the healing processes of mucosa overlying postextraction alveolus and on related complications. METHODS: Twenty systemically healthy patients who needed to extract both lower third molars were selected in a private clinic and included in this prospective split-mouth randomized clinical trial. Inclusion criteria were no smokers subjects with the necessity to extract both lower third molars with surgeries overlapping for duration and difficulty. A computer-based randomization procedure was permitted to choose the side, subject to PBMT, by means of a neodymium-doped YAG (Nd: YAG) laser (test) and controls. Both surgeries were performed by the same operator with a gap of 40 days. Twenty-two days after each surgery, a biopsy in correspondence to the alveolar mucosa of the socket was obtained from both sites and observed with an optical microscope and analyzed with histomorphometric analysis and immunohistochemistry. RESULTS: Each of the 20 participants included in this study (11 women and 9 men, nonsmokers, mean age 16 years in the range of 15 to 17 years) were subjected to the extraction of both lower third molars, and a side was treated as control, the other, as the test. The histomorphometric analysis and immunohistochemistry showed that the tested sites, contrary to controls, were characterized by a lower presence of inflammatory cells, a more mature epithelium and myofibroblasts incorporated in a network of fibers parallel to the basal membrane, with little positivity to alpha-SMA antibodies and anti-myosin but positivity to anti-desmin. CONCLUSIONS: In conclusion, PBMT accelerates the healing process of postextraction alveolus after third molar extraction.
Asunto(s)
Extracción Dental , Alveolo Dental , Adolescente , Femenino , Humanos , Inmunohistoquímica , Masculino , Estudios Prospectivos , Alveolo Dental/cirugía , Cicatrización de HeridasRESUMEN
A virtual articulator is a computer software tool that is capable of reproducing the relationship between the jaws and simulating jaw movement. It has gradually gained research interest in dentistry over the past decade. In prosthodontics, the virtual articulator should be considered as an additional diagnostic and treatment planning tool to the mechanical articulator, especially in complex cases involving alterations to the vertical dimension of occlusion. Numerous authors have reported on the available digital methodologies used for the assembly of virtual arch models in a virtual articulator, focusing their attention on topics such as the virtual facebow and digital occlusal registration. To correctly simulate jaw movement, the jaw models have to be digitalized and properly mounted on the virtual articulator. The aim of this review was to discuss the current knowledge surrounding the various techniques and methodologies related to virtual mounting in dentistry, and whether virtual articulators will become commonplace in clinical practice in the future. This review also traces the history of the virtual articulator up to its current state and discusses recently developed approaches and workflows for virtual mounting based on current knowledge and technological devices.