200-W short-pulse operation of photonic-crystal lasers based on simultaneous absorptive and radiative Q-switching.

Short-pulse high-peak-power lasers are crucial laser sources for various applications such as non-thermal ultrafine material processing and eye-safe high-resolution remote sensing. Realizing such operation in a single semiconductor laser chip without amplifiers or external resonators is expected to contribute to the development of compact, affordable laser sources for such applications. In this paper, we demonstrate short-pulse high-peak-power photonic-crystal surface-emitting lasers based on simultaneous absorptive and radiative Q-switching. The proposed device induces an instantaneous and simultaneous decrease in both absorptive and out-of-plane radiation losses due to saturable absorption and self-evolution of the photonic band, respectively, which results in drastic Q-switching operation of the device. Based on this concept, we experimentally demonstrate short-pulse generation with 200-W-class peak power and a pulse width of < 30 ps. In addition, via pulse compression with dispersion compensation, we achieve an even higher peak power of ∼300 W with a shorter pulse width of ∼10 ps.

Stabilization of Bicontinuous Cubic Phase and Its Two-Sided Nature Produced by Use of Siloxane Tails and Introduction of Molecular Nonsymmetry.

A recent intriguing finding that a helical network arrangement forms the bicontinuous cubic phase is attracting great attention for the possibility of new routes to asymmetric synthesis by achiral molecules. However, the design of the molecular structure for the cubic phase is still unrevealed. In this work, a nonsymmetric core molecule with larger naphthalene and smaller benzene moieties at each side of the central linkage and the same disiloxanyldecyloxy terminal at both terminals is shown to be the first example of molecule forming both single-layered and double-layered core assembly modes in the Ia3d phase as a single molecule system. The molecule forms the former mode at high temperatures as a thermodynamically stable phase, similarly to the symmetric naphthalene core system, whereas, on cooling below a temperature (∼350 K), a metastable Ia3d phase forms a double-layered core state down to room temperature, which is common to the benzene core system. As another effect of the nonsymmetric core, the cubic phase is maintained at room temperature for more than 100 days with slight distortion. Infrared spectral studies and quantum chemical calculations suggested the easy transformation between the two core assembly modes. The core nonsymmetry can be a versatile fine-tuning of the core assembly mode and phase stability for the cubic phase molecules.

Flavins contained in yeast extract are exploited for anodic electron transfer by Lactococcus lactis.

Cyclic voltammograms of yeast extract-containing medium exhibit a clear redox peak around -0.4V vs. Ag|AgCl. Fermentative bacterium Lactococcus lactis was hereby shown to exploit this redox compound for extracellular electron transfer towards a graphite anode using glucose as an electron donor. High performance liquid chromatography revealed that this may be a flavin-type compound. The ability of L. lactis to exploit exogenous flavins for anodic glucose oxidation was confirmed by tests where flavin-type compounds were supplied to the bacterium in well defined media. Based on its mid-point potential, riboflavin can be regarded as a near-optimal mediator for microbially catalyzed anodic electron transfer. Riboflavin derivative flavin mononucleotide (FMN) was also exploited by L. lactis as a redox shuttle, unlike flavin adenine dinucleotide (FAD), possibly due to the absence of a specific transporter for the latter. The use of yeast extract in microbial fuel cell media is herein discouraged based on the related unwanted artificial addition of redox mediators which may distort experimental results.

Lactococcus lactis catalyses electricity generation at microbial fuel cell anodes via excretion of a soluble quinone.

Lactococcus lactis is a gram-positive, normally homolactic fermenter that is known to produce several kinds of membrane associated quinones, which are able to mediate electron transfer to extracellular electron acceptors such as Fe(3+), Cu(2+) and hexacyanoferrate. Here we show that this bacterium is also capable of performing extracellular electron transfer to anodes by utilizing at least two soluble redox mediators, as suggested by the two-step catalytic current developed. One of these two mediators was herein suggested to be 2-amino-3-dicarboxy-1,4-naphthoquinone (ACNQ), via evaluation of standard redox potential, ability of the bacterium to exploit the quinone when exogenously provided, as well as by high performance liquid chromatography coupled with UV spectrum analysis. During electricity generation, L. lactis slightly deviated from its normal homolactic metabolism by excreting acetate and pyruvate in stoichiometric amounts with respect to the electrical current. In this metabolism, the anode takes on the role of electron sink for acetogenic fermentation. The finding that L. lactis self-catalyses anodic electron transfer by excretion of redox mediators is remarkable as the mechanisms of extracellular electron transfer by pure cultures of gram-positive bacteria had previously never been elucidated.

Electrochemical regulation of the end-product profile in Propionibacterium freudenreichii ET-3 with an endogenous mediator.

The end-product profile of the glucose fermentation by Propionibacterium freudenreichii ET-3 changed on an electrochemical treatment, in which the culture vessel was filled with a carbon felt anode. Acetate and propionate were produced as final end products in a molar ratio of 2:3 without any electrochemical treatments at the point of the consumption of lactate as an intermediate of the glucose fermentation. The ratio was changed to 1:1 at the point of the lactate consumption by the electrochemical incubation at an electrode potential of 0.4 V versus Ag|AgCl for 100 h. During further electrochemical incubation, propionate was oxidized to acetate as a final end-product in the microbe-containing anode chamber. 1,4-Dihydroxy-2-naphthoic acid produced by P. freudenreichii ET-3 itself would receive electrons from the metabolic pathway and serve as an electron transfer mediator from the microbial cells to the electrode.