Highly reversible extrinsic electrocaloric effects over a wide temperature range in epitaxially strained SrTiO3 films.

Electrocaloric effects have been experimentally studied in ferroelectrics and incipient ferroelectrics, but not incipient ferroelectrics driven ferroelectric using strain. Here we use optimally oriented interdigitated surface electrodes to investigate extrinsic electrocaloric effects in low-loss epitaxial SrTiO3 films near the broad second-order 243 K ferroelectric phase transition created by biaxial in-plane coherent tensile strain from DyScO3 substrates. Our extrinsic electrocaloric effects are an order of magnitude larger than the corresponding effects in bulk SrTiO3 over a wide range of temperatures including room temperature, and unlike electrocaloric effects associated with first-order transitions they are highly reversible in unipolar applied fields. Additionally, the canonical Landau description for strained SrTiO3 films works well if we set the low-temperature zero-field polarization along one of the in-plane pseudocubic <100> directions. In future, similar strain engineering could be exploited for other films, multilayers and bulk samples to increase the range of electrocaloric materials for energy efficient cooling.

Caloric materials for cooling and heating.

Magnetically driven thermal changes in magnetocaloric materials have, for several decades, been exploited to pump heat near room temperature. By contrast, their electrocaloric and mechanocaloric counterparts have only been intensively studied and exploited for little more than a decade. These different caloric strands have recently been unified to yield a single field of research that could help combat climate change by generating better heat pumps for both cooling and heating. Here we outline the timeliness of the present activity and discuss recent advances in caloric measurements, materials, and prototypes.

Large magnetoelectric coupling in multiferroic oxide heterostructures assembled via epitaxial lift-off.

Epitaxial films may be released from growth substrates and transferred to structurally and chemically incompatible substrates, but epitaxial films of transition metal perovskite oxides have not been transferred to electroactive substrates for voltage control of their myriad functional properties. Here we demonstrate good strain transmission at the incoherent interface between a strain-released film of epitaxially grown ferromagnetic La0.7Sr0.3MnO3 and an electroactive substrate of ferroelectric 0.68Pb(Mg1/3Nb2/3)O3-0.32PbTiO3 in a different crystallographic orientation. Our strain-mediated magnetoelectric coupling compares well with respect to epitaxial heterostructures, where the epitaxy responsible for strong coupling can degrade film magnetization via strain and dislocations. Moreover, the electrical switching of magnetic anisotropy is repeatable and non-volatile. High-resolution magnetic vector maps reveal that micromagnetic behaviour is governed by electrically controlled strain and cracks in the film. Our demonstration should inspire others to control the physical/chemical properties in strain-released epitaxial oxide films by using electroactive substrates to impart strain via non-epitaxial interfaces.

Voltage-driven annihilation and creation of magnetic vortices in Ni discs.

Using photoemission electron microscopy (PEEM) to image ferromagnetism in polycrystalline Ni disks, and ferroelectricity in their single-crystal BaTiO3 substrates, we find that voltage-driven 90° ferroelectric domain switching serves to reversibly annihilate each magnetic vortex via uniaxial compressive strain, and that the orientation of the resulting bi-domain reveals the chirality of the annihilated vortex. Micromagnetic simulations reveal that only 60% of this strain is required for annihilation. Voltage control of magnetic vortices is novel, and should be energetically favourable with respect to the use of a magnetic field or an electrical current. In future, stray field from bi-domains could be exploited to read vortex chirality. Given that core polarity can already be read via stray field, our work represents a step towards four-state low-power memory applications.

Large electrocaloric effects in oxide multilayer capacitors over a wide temperature range.

Heat pumps based on magnetocaloric and electrocaloric working bodies-in which entropic phase transitions are driven by changes of magnetic and electric field, respectively-use displaceable fluids to establish relatively large temperature spans between loads to be cooled and heat sinks1,2. However, the performance of prototypes is limited because practical magnetocaloric working bodies driven by permanent magnets3-5 and electrocaloric working bodies driven by voltage6-16 display temperature changes of less than 3 kelvin. Here we show that high-quality multilayer capacitors of PbSc0.5Ta0.5O3 display large electrocaloric effects over a wide range of starting temperatures when the first-order ferroelectric phase transition is driven supercritically (as verified by Landau theory) above the Curie temperature of 290 kelvin by electric fields of 29.0 volts per micrometre. Changes of temperature in the large central area of the capacitor peak at 5.5 kelvin near room temperature and exceed 3 kelvin for starting temperatures that span 176 kelvin (complete thermalization would reduce these values from 5.5 to 3.3 kelvin and from 176 to 73 kelvin). If magnetocaloric working bodies were to be replaced with multilayer capacitors of PbSc0.5Ta0.5O3, then the established design principles behind magnetocaloric heat pumps could be repurposed for better performance without bulky and expensive permanent magnets.

Shear-strain-mediated magnetoelectric effects revealed by imaging.

Large changes in the magnetization of ferromagnetic films can be electrically driven by non-180° ferroelectric domain switching in underlying substrates, but the shear components of the strains that mediate these magnetoelectric effects have not been considered so far. Here we reveal the presence of these shear strains in a polycrystalline film of Ni on a 0.68Pb(Mg1/3Nb2/3)O3-0.32PbTiO3 substrate in the pseudo-cubic (011)pc orientation. Although vibrating sample magnetometry records giant magnetoelectric effects that are consistent with the hitherto expected 90° rotations of a global magnetic easy axis, high-resolution vector maps of magnetization (constructed from photoemission electron microscopy data, with contrast from X-ray magnetic circular dichroism) reveal that the local magnetization typically rotates through smaller angles of 62-84°. This shortfall with respect to 90° is a consequence of the shear strain associated with ferroelectric domain switching. The non-orthogonality represents both a challenge and an opportunity for the development and miniaturization of magnetoelectric devices.

Colossal barocaloric effects near room temperature in plastic crystals of neopentylglycol.

There is currently great interest in replacing the harmful volatile hydrofluorocarbon fluids used in refrigeration and air-conditioning with solid materials that display magnetocaloric, electrocaloric or mechanocaloric effects. However, the field-driven thermal changes in all of these caloric materials fall short with respect to their fluid counterparts. Here we show that plastic crystals of neopentylglycol (CH3)2C(CH2OH)2 display extremely large pressure-driven thermal changes near room temperature due to molecular reconfiguration, that these changes outperform those observed in any type of caloric material, and that these changes are comparable with those exploited commercially in hydrofluorocarbons. Our discovery of colossal barocaloric effects in a plastic crystal should bring barocaloric materials to the forefront of research and development in order to achieve safe environmentally friendly cooling without compromising performance.

Enhanced electrocaloric efficiency via energy recovery.

Materials that show large and reversible electrically driven thermal changes near phase transitions have been proposed for cooling applications, but energy efficiency has barely been explored. Here we reveal that most of the work done to drive representative electrocaloric cycles does not pump heat and may therefore be recovered. Initially, we recover 75-80% of the work done each time BaTiO3-based multilayer capacitors drive electrocaloric effects in each other via an inductor (diodes prevent electrical resonance while heat flows after each charge transfer). For a prototype refrigerator with 24 such capacitors, recovering 65% of the work done to drive electrocaloric effects increases the coefficient of performance by a factor of 2.9. The coefficient of performance is subsequently increased by reducing the pumped heat and recovering more work. Our strategy mitigates the advantage held by magnetocaloric prototypes that exploit automatic energy recovery, and should be mandatory in future electrocaloric cooling devices.

Elastic and anelastic relaxation behaviour of perovskite multiferroics II: PbZr0.53Ti0.47O3 (PZT)-PbFe0.5Ta0.5O3 (PFT).

Elastic and anelastic properties of ceramic samples of multiferroic perovskites with nominal compositions across the binary join PbZr0.53Ti0.47O3-PbFe0.5Ta0.5O3 (PZT-PFT) have been assembled to create a binary phase diagram and to address the role of strain relaxation associated with their phase transitions. Structural relationships are similar to those observed previously for PbZr0.53Ti0.47O3-PbFe0.5Nb0.5O3 (PZT-PFN), but the magnitude of the tetragonal shear strain associated with the ferroelectric order parameter appears to be much smaller. This leads to relaxor character for the development of ferroelectric properties in the end member PbFe0.5Ta0.5O3. As for PZT-PFN, there appear to be two discrete instabilities rather than simply a reorientation of the electric dipole in the transition sequence cubic-tetragonal-monoclinic, and the second transition has characteristics typical of an improper ferroelastic. At intermediate compositions, the ferroelastic microstructure has strain heterogeneities on a mesoscopic length scale and, probably, also on a microscopic scale. This results in a wide anelastic freezing interval for strain-related defects rather than the freezing of discrete twin walls that would occur in a conventional ferroelastic material. In PFT, however, the acoustic loss behaviour more nearly resembles that due to freezing of conventional ferroelastic twin walls. Precursor softening of the shear modulus in both PFT and PFN does not fit with a Vogel-Fulcher description, but in PFT there is a temperature interval where the softening conforms to a power law suggestive of the role of fluctuations of the order parameter with dispersion along one branch of the Brillouin zone. Magnetic ordering appears to be coupled only weakly with a volume strain and not with shear strain but, as with multiferroic PZT-PFN perovskites, takes place within crystals which have significant strain heterogeneities on different length scales.

Long Spin Diffusion Length in Few-Layer Graphene Flakes.

We report a spin valve with a few-layer graphene flake bridging highly spin-polarized La_{0.67}Sr_{0.33}MnO_{3} electrodes, whose surfaces are kept clean during lithographic definition. Sharp magnetic switching is verified using photoemission electron microscopy with x-ray magnetic circular dichroism contrast. A naturally occurring high interfacial resistance ∼12 MΩ facilitates spin injection, and a large resistive switching (0.8 MΩ at 10 K) implies a 70-130 µm spin diffusion length that exceeds previous values obtained with sharp-switching electrodes.

Large electrocaloric effects in single-crystal ammonium sulfate.

Electrocaloric (EC) effects are typically studied near phase transitions in ceramic and polymer materials. Here, we investigate EC effects in an inorganic salt, namely ammonium sulfate (NH4)2SO4, with an order-disorder transition whose onset occurs at 223 K on cooling. For a single crystal thinned to 50 µm, we use a Maxwell relation to find a large isothermal entropy change of 30 J K(-1) kg(-1) in response to a field change of 400 kV cm(-1) The Clausius-Clapeyron equation implies a corresponding adiabatic temperature change of 4.5 K.This article is part of the themed issue 'Taking the temperature of phase transitions in cool materials'.

Giant barocaloric effects at low pressure in ferrielectric ammonium sulphate.

Caloric effects are currently under intense study due to the prospect of environment-friendly cooling applications. Most of the research is centred on large magnetocaloric effects and large electrocaloric effects, but the former require large magnetic fields that are challenging to generate economically and the latter require large electric fields that can only be applied without breakdown in thin samples. Here we use small changes in hydrostatic pressure to drive giant inverse barocaloric effects near the ferrielectric phase transition in ammonium sulphate. We find barocaloric effects and strengths that exceed those previously observed near magnetostructural phase transitions in magnetic materials. Our findings should therefore inspire the discovery of giant barocaloric effects in a wide range of unexplored ferroelectric materials, ultimately leading to barocaloric cooling devices.

Magnetoelectric CoFe2O4/polyvinylidene fluoride electrospun nanofibres.

Magnetoelectric 0-1 composites comprising CoFe2O4 (CFO) nanoparticles in a polyvinylidene fluoride (PVDF) polymer-fibre matrix have been prepared by electrospinning. The average diameter of the electrospun composite fibres is ∼325 nm, independent of the nanoparticle content, and the amount of the crystalline polar ß phase is strongly enhanced when compared to pure PVDF polymer fibres. The piezoelectric response of these electroactive nanofibres is modified by an applied magnetic field, thus evidencing the magnetoelectric character of the CFO/PVDF 0-1 composites.

Caloric materials near ferroic phase transitions.

A magnetically, electrically or mechanically responsive material can undergo significant thermal changes near a ferroic phase transition when its order parameter is modified by the conjugate applied field. The resulting magnetocaloric, electrocaloric and mechanocaloric (elastocaloric or barocaloric) effects are compared here in terms of history, experimental method, performance and prospective cooling applications.

Restoration of the third law in spin ice thin films.

A characteristic feature of spin ice is its apparent violation of the third law of thermodynamics. This leads to a number of interesting properties including the emergence of an effective vacuum for magnetic monopoles and their currents - magnetricity. Here we add a new dimension to the experimental study of spin ice by fabricating thin epitaxial films of Dy2Ti2O7, varying between 5 and 60 monolayers on an inert substrate. The films show the distinctive characteristics of spin ice at temperatures >2 K, but at lower temperature we find evidence of a zero entropy state. This restoration of the third law in spin ice thin films is consistent with a predicted strain-induced ordering of a very unusual type, previously discussed for analogous electrical systems. Our results show how the physics of frustrated pyrochlore magnets such as spin ice may be significantly modified in thin-film samples.

Non-volatile electrically-driven repeatable magnetization reversal with no applied magnetic field.

Repeatable magnetization reversal under purely electrical control remains the outstanding goal in magnetoelectrics. Here we use magnetic force microscopy to study a commercially manufactured multilayer capacitor that displays strain-mediated coupling between magnetostrictive Ni electrodes and piezoelectric BaTiO(3)-based dielectric layers. In an electrode exposed by polishing approximately normal to the layers, we find a perpendicularly magnetized feature that exhibits non-volatile electrically driven repeatable magnetization reversal with no applied magnetic field. Using micromagnetic modelling, we interpret this nominally full magnetization reversal in terms of a dynamic precession that is triggered by strain from voltage-driven ferroelectric switching that is fast and reversible. The anisotropy field responsible for the perpendicular magnetization is reversed by the electrically driven magnetic switching, which is, therefore, repeatable. Our demonstration of non-volatile magnetic switching via volatile ferroelectric switching may inspire the design of fatigue-free devices for electric-write magnetic-read data storage.

Giant and reversible extrinsic magnetocaloric effects in La0.7Ca0.3MnO3 films due to strain.

Large thermal changes driven by a magnetic field have been proposed for environmentally friendly energy-efficient refrigeration, but only a few materials that suffer hysteresis show these giant magnetocaloric effects. Here we create giant and reversible extrinsic magnetocaloric effects in epitaxial films of the ferromagnetic manganite La(0.7)Ca(0.3)MnO(3) using strain-mediated feedback from BaTiO(3) substrates near a first-order structural phase transition. Our findings should inspire the discovery of giant magnetocaloric effects in a wide range of magnetic materials, and the parallel development of nanostructured bulk samples for practical applications.

Interface-induced room-temperature multiferroicity in BaTiO3.

Multiferroic materials possess two or more ferroic orders but have not been exploited in devices owing to the scarcity of room-temperature examples. Those that are ferromagnetic and ferroelectric have potential applications in multi-state data storage if the ferroic orders switch independently, or in electric-field controlled spintronics if the magnetoelectric coupling is strong. Future applications could also exploit toroidal moments and optical effects that arise from the simultaneous breaking of time-reversal and space-inversion symmetries. Here, we use soft X-ray resonant magnetic scattering and piezoresponse force microscopy to reveal that, at the interface with Fe or Co, ultrathin films of the archetypal ferroelectric BaTiO3 simultaneously possess a magnetization and a polarization that are both spontaneous and hysteretic at room temperature. Ab initio calculations of realistic interface structures provide insight into the origin of the induced moments and bring support to this new approach for creating room-temperature multiferroics.

Improper ferroelectricity in lawsonite CaAl2Si2O7(OH)2·H2O: hysteresis and hydrogen ordering.

Ferroelectric hysteresis measurements on ceramic lawsonite show a temperature dependence of the remanent polarization P(r) = P(o)Θ(s)(cothΘ(s)/T - cothΘ(s)/T(c)) ∼ Q(2), Θ(s) = 26 K, where Q is the thermodynamic order parameter of the phase transition Pmcn-P 2(1)cn. This almost linear temperature evolution of P(r) proves the improper nature of ferroelectricity in lawsonite. The Curie temperature is T(c) = 124 K. The phase transition is strictly continuous, with a weak conjugated field near the transition point, and hydrogen ordering is discussed as the primary driving mechanism.